I'm in Amarillo, but If you paid for shipping I could do it.
@aguydragon699922 күн бұрын
is there a placeholder in the front grip for an extra mag?
@hobbystore7522 күн бұрын
@@aguydragon6999 there is no placeholder at the front
@user-lo4fh1pz8o25 күн бұрын
my kwa vector piston rover fail. .
@alia7513Ай бұрын
Price and do u ship it to New Zealand?
@hobbystore75Ай бұрын
i already sold it a few months ago, but there is a quite renowned airsoft store in new zealand, Auckland, i guess, you might want to ask that store for a similar item
@TrendyBoi544Ай бұрын
would a real glock work or would it break?
@hobbystore75Ай бұрын
it would not break if you print the materials using nylon with carbon fiber, you might ask someone to print the files for you, here's the download link cults3d.com/en/3d-model/various/airsoft-glock-brace-chassis-stock-carbine-kit-glock-17-glock-19-glock-34-tm-clon
@hobbystore75Ай бұрын
here's the installation video kzread.info/dash/bejne/pJ-qu7lpqNjIZbg.html
@franciscozamora1444Ай бұрын
hey guys do you have some blueprints to print this kit? looks awesome
@hobbystore75Ай бұрын
you may download the files on cults 3d, if you have no experience with printing 3d materials, you can always ask someone to print them for you, here's the link for downloadcults3d.com/en/3d-model/various/airsoft-ksc-we-tokyo-marui-clones-glock-17-glock-18c-glock-34-gen-3-gen-4-carbine-brace-usw-kit-with-folding-stock
@hobbystore75Ай бұрын
here's the instructions assembly for the kit drive.google.com/file/d/1X0Mupsd7Jl5guGhLpBAyV7SaBZoorSxd/view
@RonnieEveretteАй бұрын
It doesn't lock though
@achtarmizi1917Ай бұрын
Ini berapa sih mas
@2962962863 ай бұрын
Way, way too complicated and mqny redundancy. There are many kits online (free and paid) with much less work and adapters.
@yudhanto023 ай бұрын
Bisa konversi M4 Well jadi AEG om?
@MkHnn-qo2dt3 ай бұрын
ราคาประมาณ
@d2ulh1syam3 ай бұрын
Bisa post ke malaysia ngak mas?
@hobbystore753 ай бұрын
bisa
@NeoMartel3 ай бұрын
Useless. Without adapter, you can load VFC mags.
@hobbystore753 ай бұрын
yes you can
@hobbystore753 ай бұрын
only slower
@goodpro9694 ай бұрын
How can i put gas, should i remove mag base more often ?
@hobbystore754 ай бұрын
using extended mag base, when filling gas, you need to remove it first
@goodpro9694 ай бұрын
@@hobbystore75 thanks sir
@Colt.trautmanairsoft-cb9fi5 ай бұрын
Very cool
@Colt.trautmanairsoft-cb9fi5 ай бұрын
Or vorsk machinepistol
@Colt.trautmanairsoft-cb9fi5 ай бұрын
Cool makin mine with glock then ingram n hi cappa gbb full auto
@RanaArifTouqeer-nj4hu5 ай бұрын
I purchase it
@andreasgerasimatos48905 ай бұрын
Thats good.. but i found a better one withthe same design, more detailed and free too
@joeschnettler72865 ай бұрын
Damn it’s at 69 likes, I can’t 😢
@user-js9ck3rg2n5 ай бұрын
it would be cool if it was for Automatic Pistol of Stechkin
@mechanicRumah6 ай бұрын
om mau tanya dong. saya punya kwa kriss setelah di isi gas kurang lebih 6 detik tapi bb baru keluar setengah mag, gas udah langsung mau abis dan mag dingin nya parah banget. kira2 apa yang gak bener ya yang bikin gas nya gak efficient?
@hobbystore756 ай бұрын
biasanya karet o ring kecil yang terletak di inlet valve itu hilang, sehingga isi gasnya tidak bisa masuk ke dalam magazine dengan maksimal
@hobbystore756 ай бұрын
bisa juga karet piston sudah rusak, dan harus diganti
@hobbystore756 ай бұрын
tokopedia.link/eFlYr9sUIGb
@mechanicRumah6 ай бұрын
@@hobbystore75 oh iya bener karet piston kalo dah getas jadi bikin gas keluar banyak ya. ok dah saya order ya om 🙏
@hobbystore756 ай бұрын
@@mechanicRumah benar, kalau getas, gas lebih banyak keluarnya
@cccc-ob2yp6 ай бұрын
file place 😢😢😢 i myanmar place😢😢😢😢
@udinmboissekali6 ай бұрын
Brp om?
@hobbystore756 ай бұрын
8.5 nego om
@notnightcoresyrex29817 ай бұрын
compensator name plz😢
@jessedupreez7 ай бұрын
That is a great design!! how strong is the cocking/loading pin?
@hobbystore757 ай бұрын
it is strong enough, because it has long tiiny screw inserted inside
@majeedq657 ай бұрын
Harga nya gan? Sy coba buka link Tpedia gak bisa
@hobbystore757 ай бұрын
sudah laku om
@hobbystore757 ай бұрын
WE P90 GBBR masih ada
@andruskyg.88367 ай бұрын
Where is the link?
@hobbystore757 ай бұрын
it's sold
@williamcrawford79827 ай бұрын
Mo
@alexander_agung_prastowo8 ай бұрын
Buat magwell untuk grip tanio koba kjw kp05 bisa?
@hobbystore758 ай бұрын
utk KP05 bisa om
@alexander_agung_prastowo8 ай бұрын
@@hobbystore75 soalnya kalo pakai magwell yg umum dijual untuk hicapa ga cocok di kp05
@alexander_agung_prastowo9 ай бұрын
Surabaya mana lokasinya? Saya pakai mag KJW dengan mag base bawaan. Mag base nya mentok magwell jadi magazine ga masuk sempurna
@hobbystore759 ай бұрын
kalau isudah pakai magwell, memang sebaiknya ukur lagi
@alexander_agung_prastowo9 ай бұрын
Saya lihat kalo KJW mag nya kayak hicapa 4.3. Bagian bottom magazine nya lebih pendek dari Hicapa 5.1
@hobbystore759 ай бұрын
@@alexander_agung_prastowo kalau lebih pendek berarti magazine 4.3, pakai magbase yang model tipis saja biar bisa masuk ke magwell
@realwhatbrains9 ай бұрын
*Sigh* gotta love that one neighbor with the exhausts to contaminate the audio..
@WheezyWtf9 ай бұрын
Hello sir👋, will this fit a Glock 19 based AIR SOFT weapon?
@hobbystore759 ай бұрын
yes, it will fit
@WheezyWtf9 ай бұрын
@@hobbystore75 I’m using a creakily ender 3, the main frame is a little big in cura, any pointers on how to print it on printer bed
@hobbystore759 ай бұрын
@@WheezyWtf i suggest you print the main frame vertically, with the flat bottom where the end stock will be attached, on the print bed, nonetheless, this will ease printing, but will result in less durability of the frame
@WheezyWtf9 ай бұрын
@@hobbystore75 thank you sir! I’m Slicing in cura
@hobbystore759 ай бұрын
@@WheezyWtf my pleasure
@basil101010109 ай бұрын
Not a bullpup. It can be called a carbine conversion.
@Chillathis9 ай бұрын
Thanks tutorial nya om
@hobbystore759 ай бұрын
sama sama
@-_Nuke_-9 ай бұрын
@@hobbystore75hello! This is the 3d model that you are selling or the printed one?
@hobbystore759 ай бұрын
@@-_Nuke_- it is also available for purchase on cults 3D
@hobbystore759 ай бұрын
@@-_Nuke_- here's the link for the file cults3d.com/en/3d-model/various/gbb-gbb-kjworks-kjw-magazine-mag-airsoft-6mm-easy-ergonomic-quick-bb-loader
@-_Nuke_-9 ай бұрын
@@hobbystore75 You are the real MVP! Thank you so much man!
@sanganakyatim590210 ай бұрын
Beli di negara mna mas?
@hobbystore7510 ай бұрын
Hong Kong
@sanganakyatim590210 ай бұрын
Harganya berapa?
@hobbystore7510 ай бұрын
Rp.11jt
@GhulamMurtaza-rk6lq10 ай бұрын
What is the price
@hobbystore7510 ай бұрын
only available for regional sale, not outside cuntry sale
@dwicif611410 ай бұрын
Minta kontaknya bang? Udal laku?
@justaweeb908610 ай бұрын
Is this even legal
@TheX-3d10 ай бұрын
It's not a firearm, it's AirSoft.
@justaweeb908610 ай бұрын
@@TheX-3dairsoft mfs always doing too much lmfao i was asking to make sure, i should've checked the description though lol
@ok-xs8cl10 ай бұрын
.
@user-yz1rr4mr5b11 ай бұрын
Address please and prices
@hobbystore7511 ай бұрын
only available for regional sale, not overseas sale
@kwaaakity11 ай бұрын
thats not a bullpup lmao
@malikdmawan758811 ай бұрын
Price kia ha
@hobbystore7511 ай бұрын
only available for regional sale
@starcatcher5699 Жыл бұрын
does this fit a kjworks kp-08?
@hobbystore75 Жыл бұрын
kjworks kp08 has a very large thick looking handgrip, I am not too sure if the magwell will fit, normal hi capa handgrip sure does fit
@starcatcher5699 Жыл бұрын
@@hobbystore75 I tried out an armorer works magwell. It fits just fine, but the pin hole doesn't line up, unfortunately it's lower than the pin hole of the grip
@hobbystore75 Жыл бұрын
@@starcatcher5699 i guess the magwell wont fit at all
@hobbystore75 Жыл бұрын
yes unfortunately, i do think so
@AZPaul48 Жыл бұрын
Cannt find the files
@hobbystore75 Жыл бұрын
This is the new link, the previous one is missing cults3d.com/en/3d-model/various/tactical-double-barrel-airsoft-grenade-launcher-for-40-mm-shell-quick-deploy-toy-weapon
@@hobbystore75 it would be neat to make a flare gun out of this
@eze008 Жыл бұрын
Can I request one for the Taurus G3... and just bolt a rail on the back so we can attach our own braces.
@hobbystore75 Жыл бұрын
unfortunately, i do not own Taurus G3, therefore I can't get correct measurements
@a.alami313 Жыл бұрын
Where i can download the file 🤔
@hobbystore75 Жыл бұрын
you may download the files from the following link cults3d.com/en/3d-model/various/gbb-gbbr-bullpup-airsoft-tokyo-marui-clones-glock-carbine-conversion-kit-similar-to-roni-recover-tactical-pi-x-glock-17-18c-34-rhino-x
Пікірлер
it should work on PTS
very nice, work in mag PTS?
anyone in dallas tx could print me this?
I'm in Amarillo, but If you paid for shipping I could do it.
is there a placeholder in the front grip for an extra mag?
@@aguydragon6999 there is no placeholder at the front
my kwa vector piston rover fail. .
Price and do u ship it to New Zealand?
i already sold it a few months ago, but there is a quite renowned airsoft store in new zealand, Auckland, i guess, you might want to ask that store for a similar item
would a real glock work or would it break?
it would not break if you print the materials using nylon with carbon fiber, you might ask someone to print the files for you, here's the download link cults3d.com/en/3d-model/various/airsoft-glock-brace-chassis-stock-carbine-kit-glock-17-glock-19-glock-34-tm-clon
here's the installation video kzread.info/dash/bejne/pJ-qu7lpqNjIZbg.html
hey guys do you have some blueprints to print this kit? looks awesome
you may download the files on cults 3d, if you have no experience with printing 3d materials, you can always ask someone to print them for you, here's the link for downloadcults3d.com/en/3d-model/various/airsoft-ksc-we-tokyo-marui-clones-glock-17-glock-18c-glock-34-gen-3-gen-4-carbine-brace-usw-kit-with-folding-stock
here's the instructions assembly for the kit drive.google.com/file/d/1X0Mupsd7Jl5guGhLpBAyV7SaBZoorSxd/view
It doesn't lock though
Ini berapa sih mas
Way, way too complicated and mqny redundancy. There are many kits online (free and paid) with much less work and adapters.
Bisa konversi M4 Well jadi AEG om?
ราคาประมาณ
Bisa post ke malaysia ngak mas?
bisa
Useless. Without adapter, you can load VFC mags.
yes you can
only slower
How can i put gas, should i remove mag base more often ?
using extended mag base, when filling gas, you need to remove it first
@@hobbystore75 thanks sir
Very cool
Or vorsk machinepistol
Cool makin mine with glock then ingram n hi cappa gbb full auto
I purchase it
Thats good.. but i found a better one withthe same design, more detailed and free too
Damn it’s at 69 likes, I can’t 😢
it would be cool if it was for Automatic Pistol of Stechkin
om mau tanya dong. saya punya kwa kriss setelah di isi gas kurang lebih 6 detik tapi bb baru keluar setengah mag, gas udah langsung mau abis dan mag dingin nya parah banget. kira2 apa yang gak bener ya yang bikin gas nya gak efficient?
biasanya karet o ring kecil yang terletak di inlet valve itu hilang, sehingga isi gasnya tidak bisa masuk ke dalam magazine dengan maksimal
bisa juga karet piston sudah rusak, dan harus diganti
tokopedia.link/eFlYr9sUIGb
@@hobbystore75 oh iya bener karet piston kalo dah getas jadi bikin gas keluar banyak ya. ok dah saya order ya om 🙏
@@mechanicRumah benar, kalau getas, gas lebih banyak keluarnya
file place 😢😢😢 i myanmar place😢😢😢😢
Brp om?
8.5 nego om
compensator name plz😢
That is a great design!! how strong is the cocking/loading pin?
it is strong enough, because it has long tiiny screw inserted inside
Harga nya gan? Sy coba buka link Tpedia gak bisa
sudah laku om
WE P90 GBBR masih ada
Where is the link?
it's sold
Mo
Buat magwell untuk grip tanio koba kjw kp05 bisa?
utk KP05 bisa om
@@hobbystore75 soalnya kalo pakai magwell yg umum dijual untuk hicapa ga cocok di kp05
Surabaya mana lokasinya? Saya pakai mag KJW dengan mag base bawaan. Mag base nya mentok magwell jadi magazine ga masuk sempurna
kalau isudah pakai magwell, memang sebaiknya ukur lagi
Saya lihat kalo KJW mag nya kayak hicapa 4.3. Bagian bottom magazine nya lebih pendek dari Hicapa 5.1
@@alexander_agung_prastowo kalau lebih pendek berarti magazine 4.3, pakai magbase yang model tipis saja biar bisa masuk ke magwell
*Sigh* gotta love that one neighbor with the exhausts to contaminate the audio..
Hello sir👋, will this fit a Glock 19 based AIR SOFT weapon?
yes, it will fit
@@hobbystore75 I’m using a creakily ender 3, the main frame is a little big in cura, any pointers on how to print it on printer bed
@@WheezyWtf i suggest you print the main frame vertically, with the flat bottom where the end stock will be attached, on the print bed, nonetheless, this will ease printing, but will result in less durability of the frame
@@hobbystore75 thank you sir! I’m Slicing in cura
@@WheezyWtf my pleasure
Not a bullpup. It can be called a carbine conversion.
Thanks tutorial nya om
sama sama
@@hobbystore75hello! This is the 3d model that you are selling or the printed one?
@@-_Nuke_- it is also available for purchase on cults 3D
@@-_Nuke_- here's the link for the file cults3d.com/en/3d-model/various/gbb-gbb-kjworks-kjw-magazine-mag-airsoft-6mm-easy-ergonomic-quick-bb-loader
@@hobbystore75 You are the real MVP! Thank you so much man!
Beli di negara mna mas?
Hong Kong
Harganya berapa?
Rp.11jt
What is the price
only available for regional sale, not outside cuntry sale
Minta kontaknya bang? Udal laku?
Is this even legal
It's not a firearm, it's AirSoft.
@@TheX-3dairsoft mfs always doing too much lmfao i was asking to make sure, i should've checked the description though lol
.
Address please and prices
only available for regional sale, not overseas sale
thats not a bullpup lmao
Price kia ha
only available for regional sale
does this fit a kjworks kp-08?
kjworks kp08 has a very large thick looking handgrip, I am not too sure if the magwell will fit, normal hi capa handgrip sure does fit
@@hobbystore75 I tried out an armorer works magwell. It fits just fine, but the pin hole doesn't line up, unfortunately it's lower than the pin hole of the grip
@@starcatcher5699 i guess the magwell wont fit at all
yes unfortunately, i do think so
Cannt find the files
This is the new link, the previous one is missing cults3d.com/en/3d-model/various/tactical-double-barrel-airsoft-grenade-launcher-for-40-mm-shell-quick-deploy-toy-weapon
cults3d.com/en/3d-model/various/tactical-double-barrel-airsoft-grenade-launcher-for-40-mm-shell-quick-deploy-toy-weapon
@@hobbystore75 it would be neat to make a flare gun out of this
Can I request one for the Taurus G3... and just bolt a rail on the back so we can attach our own braces.
unfortunately, i do not own Taurus G3, therefore I can't get correct measurements
Where i can download the file 🤔
you may download the files from the following link cults3d.com/en/3d-model/various/gbb-gbbr-bullpup-airsoft-tokyo-marui-clones-glock-carbine-conversion-kit-similar-to-roni-recover-tactical-pi-x-glock-17-18c-34-rhino-x
@@hobbystore75does this work with real steel?
@@hobbystore75 patent claim filed as well