Пікірлер

• 
  @alexmaclean19 сағат бұрын

  Thanks for the video man, saved me a ton of frustration.

• 
  @kurtT3429 сағат бұрын

  That’s always my goal! Save the knuckles and our mental stability.

• 
  @addminusDIY12 күн бұрын

  08-09 same setup anyway

• 
  @kurtT34212 күн бұрын

  Good to know. Always looking for accurate info.

• 
  @andkm12323 күн бұрын

  was the signal generated by your oscilloscope ac or dc? if ac mode was selected from the probe, we expect it to catch ac voltage not dc voltage. if ac was selected and yet it still catches dc voltage signal then it means there is a flaw in that device.

• 
  @kurtT34222 күн бұрын

  Good eye! It appears both my oscilloscope and signal generator output an AC waveform. The oscilloscope 5 V pp @ 1khz. My signal generator depending on the setting 0-10v pp and variable frequency. I know from the manufacturers literature that the DC portion of the probe could measure up to 24vdc, I can’t speak to what the max value is when set to measure frequency. In any event, I was measuring an AC waveform on my oscilloscope with the frequency setting on the V200 pro.

• 
  @mikeaudette169923 күн бұрын

  Great job ! Good to see someone else struggle , not always as easy as people make it look . Thanks for sharing

• 
  @mikeaudette169924 күн бұрын

  Who makes the pancake impact gun you used

• 
  @kurtT34224 күн бұрын

  Astro pneumatics

• 
  @mikeaudette169924 күн бұрын

  Gotta love rust an exhaust work . Nice job

• 
  @noahadimАй бұрын

  Is it actually a single channel ocilliscope??

• 
  @kurtT342Ай бұрын

  Some might call it that, but I wouldn’t. It can measure DC voltage and frequency, but will only measure the positive a;ternation of a waveform.

• 
  @jazzp81Ай бұрын

  Very helpful

• 
  @kuldeepchahal1995Ай бұрын

  Helo sir ya tool chaya

• 
  @robertfoilesjr1337Ай бұрын

  Please clarify if the tool graphs AC current (speed sensors etc) or pwm DC current or both?

• 
  @kurtT342Ай бұрын

  Good question. From what i can tell, it captures the positive portion of the waveform. It graphs DC voltage, and the positive side of an AC waveform. It does not graph current/amperage. You should be able to measure the speed sensor output in frequency and voltage, but not duty cycle %

• 
  @cheesehead3087Ай бұрын

  Very helpful, thank you

• 
  @kenszakacsi2310Ай бұрын

  Question. Like the power probes. Does this tester let you know if there is resistance in the wire by not lighting up the little red and green lights

• 
  @kurtT342Ай бұрын

  Hey Ken, to my knowledge and with the testing I've performed, no.

• 
  @kurtT342Ай бұрын

  Ken check out my latest video. It attempts to answer your question about visual cues

• 
  @MikesVlogssАй бұрын

  👍👍

• 
  @davidwalker9035Ай бұрын

  Sounds like a commercial. I want to know what it won't do.

• 
  @kurtT342Ай бұрын

  Thanks for the comment David. It won’t measure high voltage, and it isn’t an amp meter. Is there something specific you have in mind?

• 
  @marcelaudette8290Ай бұрын

  could you use a chisel on thumper to spread the joint.

• 
  @kurtT342Ай бұрын

  Absolutely! I tried that during the fast motion video instead of using a hammer. I found that if i had removed both bushing bolts and separated the control arm from the car, then removing the ball joint from the pinch bolt would have been easier. Thats why i shoot these videos, so i make the mistakes and you don't

• 
  @omerbalkaya5894Ай бұрын

  They're more likie $200 way too expensive

• 
  @kurtT342Ай бұрын

  $99 bucks on Amazon

• 
  @davidsmith385Ай бұрын

  Wow, look at all the jeep Cherokees.

• 
  @kurtT342Ай бұрын

  If you want to know which vehicles you shouldn’t buy, just visit the graveyard😀

• 
  @LetsGoBrandon_Ай бұрын

  One of the worst places for filming is under a car and you nailed it with good lighting and view angles.

• 
  @RobThomas-id2cwАй бұрын

  That is a nice pump looks medical grade quality. Which auto parts store am I able to purchase one?

• 
  @kurtT342Ай бұрын

  Any pump that provides positive pressure will do. Hand held vacuum gauges work as well

• 
  @user-ys7uo4fw3h2 ай бұрын

  Must be fun after a rain storm

• 
  @kurtT3422 ай бұрын

  Yup…I should have filmed the pond I had to walk around

• 
  @marcelaudette82902 ай бұрын

  Another cool video 📸.

• 
  @marcelaudette82902 ай бұрын

  Be careful not to destroy that pretty watch 😅.

• 
  @jcspc7772 ай бұрын

  Very good tutorial. Just got my scanner and have never really used one before. Worked on cars all my life so i kinda know my way around. Looking forward to this tool helping me out!

• 
  @kurtT3422 ай бұрын

  Let me know if you have any questions. I’m not a professional, but have worked on cars all my life as well. These scanners make it so much easier to diagnose.

• 
  @marcelaudette82902 ай бұрын

  Boy you made that look easy.😊

• 
  @kurtT3422 ай бұрын

  Nope..Thumper did.

• 
  @AndrewDrapper2 ай бұрын

  Very good review. I will have to buy.

• 
  @sagrysdebeer13482 ай бұрын

  Can I use it on a 28v sistem

• 
  @kurtT3422 ай бұрын

  Are you referring to a diesel vehicle? 24vdc system?

• 
  @assicsnike3470Ай бұрын

  ​​@@kurtT342 yes. is it worth buying???

• 
  @kurtT342Ай бұрын

  The manual says it works with 24 volt systems. Definitely worth buying. I have many digital voltmeters, and this is a great addition to those. It’s great when trying to test bulbs, injectors and anything else utilizing your car/truck battery as the source.@@assicsnike3470

• 
  @assicsnike3470Ай бұрын

  ​@@kurtT342 how it shows the oscillogram of the crankshaft sensor ??

• 
  @kurtT342Ай бұрын

  It would depend on your vehicle. What’s the year and model? The website states it can capture a fuel injector waveform. My guess is that the tool can handle the voltage either 5vdc or 12vdc depending on the signal, it’s the duty cycle I’m unsure of. Fuel injector pulse width is much slower than the crankshaft. I’m thinking it will capture the signal, but I don’t know if the resolution will be good enough to diagnose. Let me know how I can help.@@assicsnike3470

• 
  @richman613 ай бұрын

  Amazing, this just happen to mine a couple of weeks ago. 2019 ram Thanks for the video. need to find a video for taking the bolt out. Dealership wants $400.

• 
  @kurtT3423 ай бұрын

  I’m kicking myself for not shooting that part. I will when I do the second one. My suggestion is heat the bolt up so you can either snap the head off or the bolt comes out. If not, once the head comes off, cut the threaded side off as close to the flange as you can. Then use a center punch to create a small dimple in the center of the cut bolt. Start with a small bit, and work your way up to a size that doesn’t damage the thread flange, but reduces the wall size of the bolt. Then use a chisel to collapse the wall of the bolt inward. After you get the bolt out, then just retap the threads.

• 
  @richman613 ай бұрын

  @@kurtT342 thanks

• 
  @roundcornerent3 ай бұрын

  Great review and examples . i'm now a subscriber.

• 
  @marcelaudette82903 ай бұрын

  Are you in the vehicle doing these tests.

• 
  @kurtT3423 ай бұрын

  Yes. I connect the device via a cable to the diagnostic connector. This scanner does not use a wireless dongle.

• 
  @Paredes5033 ай бұрын

  Hola sr. Es un excelente video me gusta la forma didáctica como explica las funciones del dispositivo, me gustaria saber a donde puedo conseguir esos cables flexibles para adaptarlos al v200 pro, gracias por si excelente información

• 
  @kurtT3423 ай бұрын

  thanks for the feedback. here is the description. got it on Amazon. luv it so far. Makeronics 93-in-1 Automotive Circuit Test Leads Kit with 6 Pockets Roll Up Tool Bag, Multi-Function Electric Tester Diagnostic Tool Wire Connectors Set, Black Carrying Case 93-in-1 Automotive Circuit Test Leads Kit with 6 Pockets Roll Up Tool Bag, Multi-Function Electric Tester Diagnostic Tool Wire Connectors Set, Black Carrying Case

• 
  @zw32453 ай бұрын

  Hi, it seem that your ip608 have activation test, is it send by xtool or have you by yourself ?

• 
  @kurtT3423 ай бұрын

  Yes, it does enable the ability to perform actuation/functional testing. I will capture some additional videos to showcase this function. I purchased the scanner from XTOOL via Amazon.

• 
  @magogon703 ай бұрын

  Great job,You are great reviewing tools,keep doing it,i guess you have a great future on youtube talking about any topic.thanks

• 
  @kurtT3423 ай бұрын

  Thanks for the feedback! Just trying to help out my fellow DIYers

• 
  @marcelaudette82903 ай бұрын

  I would like you to show me how you solder it on.

• 
  @marcelaudette82903 ай бұрын

  Looks good to me 😊.

• 
  @RobThomas-id2cw3 ай бұрын

  Thanks for the review of this ckt probe. This is exactly what I have been looking to replace my light bulb on a screwdriver. Please update this video with an affiliate link so I can purchase one.

• 
  @kurtT3423 ай бұрын

  Glad it was helpful. I was able to purchase it on Amazon. Just search for VDIAGTOOL V200 pro. Sorry, I can't provide links yet. New to UTUBE.