To lock joints where I want em, I just drive a single screw right through the bone. Gotta make sure you bisect the "axle" that the bone pivots about fairly accurately. Mine's holding a MUCH heavier lantern (including 4 AA batteries) just fine without wire supports. Also, I was able to bend the spine and neck quite dramatically with a heat gun -- much easier than hollowing out and inserting PVC and looks totally natural. Thanks for sharing your techniques.
@veronicacarroll8889Ай бұрын
Great job!!! 🤩
@EnchiladaBoredom2 ай бұрын
😅
@russunderwood73602 ай бұрын
Got to be up there as one of the best this❤ absolute belter of a track🔥
@randywatson83476 ай бұрын
It has Eurobeat DNA.
@NRUBIN-cb3lo7 ай бұрын
What streaming service has this mix? I've searched and can't find.
@deoblo858 ай бұрын
I have yet and always wanted to make a leering Skelly ..... you have a prefect DIY right here thanks for sharing HFL!!
@andyt13138 ай бұрын
Thanks buddy 🙂. You’re one of my favorite prop makers. You’re so skilled.
@LordHog9 ай бұрын
Good job
@richardprather290010 ай бұрын
Last time a real 2 x 4 was made was around 1964... that's why homes built before 1970 will last longer than most homes made today... next time at a lumber yard see how many board look like a cork screw.
@eugenijusp11 ай бұрын
This remix associate with Aliens (1986 ) theme
@juandeutrilla44411 ай бұрын
buenos dias racha!!!
@Shagyamum Жыл бұрын
Classic 90s Wigan pier tune
@Jay_Kayy Жыл бұрын
I just bought the vinyl of thia future breeze remix it is.
@wwpl7707 Жыл бұрын
Why can’t I find this anywhere to download?
@anniemae1987 Жыл бұрын
Heyy hey did you see a jump in views for this video? 👀 that was me.. yup.. I've probably watched it about 50 times at least. I been trying to put one together it's alot harder then I thought oh my goodness! But I'm about half way there trying to modify it and make a raising lid with another reindeer motor and lights inside. But finally got to the setting the motor part I think the problem is I'm making it harder then it probably is lol. Then I think I'll drylock everythin so it last a few years.
@RyanFeatherston Жыл бұрын
+Andrew T 1313 Even your favorite Albert Gore agrees that Ralph Nader is innocent of any wrong doing! Shows how out of touch you are. LMAO!!!!!!
@RyanFeatherston Жыл бұрын
+Andrew T 1313 Ralph Nader did nothing wrong!
@90s-Trance_86 Жыл бұрын
I llove this BPM and way of uplifting vocal/choirs trance music!! Best music in the whole world
@JonathanMurray Жыл бұрын
Great prop! Looking for ideas to make one of my own, yours is made from parts I have on hand, so yay! Any reason not to use 45 degree joints instead of bending the pvc? So easy to over-bend and end up with a floppy dangle... I always have spare PVC, so will likely try it both ways. Thanks for the show and tell! FYI, a standard "2x4" as sold in lumber yards and home improvement centers is actually about 1.5x3.5". Your boards are in fact, "2x4"!
@andyt1313 Жыл бұрын
hey. bending with the heat gun ended up giving me alot of freedom since I wasn't quite sure about where and how much angle. If it's wrong I can just heat it up again and bend it differently. someone else told me about the board dimensions. I feel like an idiot having that in there. lol
@rwaksphilmon7051 Жыл бұрын
What a nice song
@melmortimer1545 Жыл бұрын
What a ass shaking remix ..it's a bit good! ❤️
@IsabelBrites Жыл бұрын
🤓😁❤️
@edwinacoffman64292 жыл бұрын
This is so cool. Please make a full tutorial on it!
@uruwashii52312 жыл бұрын
Love this prop, well done! Thank you for sharing with us 🙌
@pollyg5622 жыл бұрын
Red LEDs in the eyes is a must for an outdoor figure, as it draws people in from such a distance they're petrified bedtime they are close
@nancyhagan25202 жыл бұрын
I agree you did an awesome job! It already looks great!
@coxstereightynine96502 жыл бұрын
Very cool, you should be proud! It looks great, thanks for sharing details of your thought process and working out problems you encountered, it helps us less creative types.
@kellyhalliwell18812 жыл бұрын
Absolute banger of a tune ❤️🎶
@patbo35772 жыл бұрын
1st off great work. I love that you worked it out your way. I haven't finished my watching the entire video yet, but I wanted to share my thoughts with you so far. You said you weren't happy with stone... My suggestion would be make the top part that he's sitting on look thicker. So build out the front. Create a new front ( with sides)that you can slide under his legs. It could even be a cubby that a statue sits in. (Add secure it with wooden shish kabob sticks or such) Most tombstone bases aren't that big compared to the up right slab. The other option to balance out the base to back would be a urn or spray foam rocks or creeping faux plant vines. But you really did great , it is difficult modifying the skeleton 's.
@andyt13132 жыл бұрын
Thank you for the compliment and suggestions. 😃
@SimplyVatHome2 жыл бұрын
This is very unique 👍🏾👍🏾 I would love to see you build this in a tutorial??? I love creating but need to follow along. Any chance of you creating another from the start??? Great job!!!😀
@TheXerosyn2 жыл бұрын
Awesome work. Would love to know the dimensions.
@Stiff_Richards2 жыл бұрын
sick bro. ssiicckk
@erinhopkins28362 жыл бұрын
I am impressed with incredible talented man
@sidneynorwitz2 жыл бұрын
Thanks for sharing. I'm also impressed about the deer motor since those like to break. The felt was a good idea.
@WayneDoodle12 жыл бұрын
Great work. I was expecting a wiper motor and you did with a deer motor! Wow! Keep it up!
@twopinacoladas2 жыл бұрын
Very cool, nice work!
@tonyho56112 жыл бұрын
I remember Toni Braxton's Unbreak My Heart and Deborah Cox's Things Just Ain't The Same Hex Hector mixes were so so so huge at the circuit parties.. 1996 to 1997... And this song of course Circuit parties was born during this time mid to late 90s..... Yes circuit parties was expensive back than but still way cheaper than now... I believe circuit parties have really died down since than
@tonyho56112 жыл бұрын
Yep that was me.... In "fool's paradise" with bad relationships and the circuit party scene didn't help either
@Cedsback2 жыл бұрын
i wrote the lyrics to this song to break up with my 1st love- such drama-LOL
@kellyannhalliwell83092 жыл бұрын
Ohh Lordy ❤️ I’ve looked for this tune for so long 🎶👏
@lisanewhouse21013 жыл бұрын
A great version of this song!Thanks
@kevb85443 жыл бұрын
This remix set clubs alight.
@kierandevenney56163 жыл бұрын
Point inn never to b repeated
@joemiles88053 жыл бұрын
A classic, takes me back every time like no other song can
@drewp19743 жыл бұрын
Forgot about this epic track. Wow!!
@kushansalinda23713 жыл бұрын
Dannii l 💝 you.
@dreammix94303 жыл бұрын
WOW this is totally awesome!!!
@kushansalinda23713 жыл бұрын
🙌💓💃💚💛💖👍
@zennygreen3 жыл бұрын
Howard Jones is behind this track I believe!
@adambgunn3 жыл бұрын
Such a great remix of this track. One of my favorites..
Пікірлер
To lock joints where I want em, I just drive a single screw right through the bone. Gotta make sure you bisect the "axle" that the bone pivots about fairly accurately. Mine's holding a MUCH heavier lantern (including 4 AA batteries) just fine without wire supports. Also, I was able to bend the spine and neck quite dramatically with a heat gun -- much easier than hollowing out and inserting PVC and looks totally natural. Thanks for sharing your techniques.
Great job!!! 🤩
😅
Got to be up there as one of the best this❤ absolute belter of a track🔥
It has Eurobeat DNA.
What streaming service has this mix? I've searched and can't find.
I have yet and always wanted to make a leering Skelly ..... you have a prefect DIY right here thanks for sharing HFL!!
Thanks buddy 🙂. You’re one of my favorite prop makers. You’re so skilled.
Good job
Last time a real 2 x 4 was made was around 1964... that's why homes built before 1970 will last longer than most homes made today... next time at a lumber yard see how many board look like a cork screw.
This remix associate with Aliens (1986 ) theme
buenos dias racha!!!
Classic 90s Wigan pier tune
I just bought the vinyl of thia future breeze remix it is.
Why can’t I find this anywhere to download?
Heyy hey did you see a jump in views for this video? 👀 that was me.. yup.. I've probably watched it about 50 times at least. I been trying to put one together it's alot harder then I thought oh my goodness! But I'm about half way there trying to modify it and make a raising lid with another reindeer motor and lights inside. But finally got to the setting the motor part I think the problem is I'm making it harder then it probably is lol. Then I think I'll drylock everythin so it last a few years.
+Andrew T 1313 Even your favorite Albert Gore agrees that Ralph Nader is innocent of any wrong doing! Shows how out of touch you are. LMAO!!!!!!
+Andrew T 1313 Ralph Nader did nothing wrong!
I llove this BPM and way of uplifting vocal/choirs trance music!! Best music in the whole world
Great prop! Looking for ideas to make one of my own, yours is made from parts I have on hand, so yay! Any reason not to use 45 degree joints instead of bending the pvc? So easy to over-bend and end up with a floppy dangle... I always have spare PVC, so will likely try it both ways. Thanks for the show and tell! FYI, a standard "2x4" as sold in lumber yards and home improvement centers is actually about 1.5x3.5". Your boards are in fact, "2x4"!
hey. bending with the heat gun ended up giving me alot of freedom since I wasn't quite sure about where and how much angle. If it's wrong I can just heat it up again and bend it differently. someone else told me about the board dimensions. I feel like an idiot having that in there. lol
What a nice song
What a ass shaking remix ..it's a bit good! ❤️
🤓😁❤️
This is so cool. Please make a full tutorial on it!
Love this prop, well done! Thank you for sharing with us 🙌
Red LEDs in the eyes is a must for an outdoor figure, as it draws people in from such a distance they're petrified bedtime they are close
I agree you did an awesome job! It already looks great!
Very cool, you should be proud! It looks great, thanks for sharing details of your thought process and working out problems you encountered, it helps us less creative types.
Absolute banger of a tune ❤️🎶
1st off great work. I love that you worked it out your way. I haven't finished my watching the entire video yet, but I wanted to share my thoughts with you so far. You said you weren't happy with stone... My suggestion would be make the top part that he's sitting on look thicker. So build out the front. Create a new front ( with sides)that you can slide under his legs. It could even be a cubby that a statue sits in. (Add secure it with wooden shish kabob sticks or such) Most tombstone bases aren't that big compared to the up right slab. The other option to balance out the base to back would be a urn or spray foam rocks or creeping faux plant vines. But you really did great , it is difficult modifying the skeleton 's.
Thank you for the compliment and suggestions. 😃
This is very unique 👍🏾👍🏾 I would love to see you build this in a tutorial??? I love creating but need to follow along. Any chance of you creating another from the start??? Great job!!!😀
Awesome work. Would love to know the dimensions.
sick bro. ssiicckk
I am impressed with incredible talented man
Thanks for sharing. I'm also impressed about the deer motor since those like to break. The felt was a good idea.
Great work. I was expecting a wiper motor and you did with a deer motor! Wow! Keep it up!
Very cool, nice work!
I remember Toni Braxton's Unbreak My Heart and Deborah Cox's Things Just Ain't The Same Hex Hector mixes were so so so huge at the circuit parties.. 1996 to 1997... And this song of course Circuit parties was born during this time mid to late 90s..... Yes circuit parties was expensive back than but still way cheaper than now... I believe circuit parties have really died down since than
Yep that was me.... In "fool's paradise" with bad relationships and the circuit party scene didn't help either
i wrote the lyrics to this song to break up with my 1st love- such drama-LOL
Ohh Lordy ❤️ I’ve looked for this tune for so long 🎶👏
A great version of this song!Thanks
This remix set clubs alight.
Point inn never to b repeated
A classic, takes me back every time like no other song can
Forgot about this epic track. Wow!!
Dannii l 💝 you.
WOW this is totally awesome!!!
🙌💓💃💚💛💖👍
Howard Jones is behind this track I believe!
Such a great remix of this track. One of my favorites..
Insane !
Love all these tracks