Пікірлер

• 
  @stanleykipto2 күн бұрын

  GREAT ❤

• 
  @starstonvillagewebsite22024 күн бұрын

  Many thanks- this is the only video I've found that goes through how to install a motor into an ordinary blind. I bought some made by another company (sorry! but I'm in the UK so no hard feelings, I hope 😀) and their instructions are total rubbish. I now know what I'm doing.

• 
  @iseekblinds4 күн бұрын

  Glad it helped :)

• 
  @essonpeace34179 күн бұрын

  Thank you so much sir

• 
  @meghankinney11 күн бұрын

  Hi Mike- are these custom curtains ? is there a link that you can share with me? Trying to achieve this look for a client and have struggled in the past.

• 
  @iseekblinds11 күн бұрын

  Good Morning @meghankinney, Thank you for reaching out. Yes these are our Custom Made Curtains :) You can find out more information online: iseekblinds.com.au/curtains Order Now: iseekblinds.com.au/configurator/product/index or Book in a Video Consult with Michael: iseekblinds.com.au/contact-us Please do not hesitate to reach out, should be any further of assistance. Thank you I Seek Blinds Team Member

• 
  @nopenope84319 күн бұрын

  If only they weren’t RF.

• 
  @katogilvy26 күн бұрын

  When measuring for a T-post I understand that it’s measuring from left to the middle of the post but I’m unsure of how to know where the T post would sit. For example, if it is 1780mm wide window and going 3 panels with 1 panel, T post and then 2 panels. Would I divide the 1780/3 to make each panel approx 590mm wide each and then measure left 590mm plus half a T-post width? I hope this make sense 😅

• 
  @iseekblinds24 күн бұрын

  Hi Kat, With measuring a T post we recommend to measure from left to the middle of where the T post will be located. Some customers may have a vertical mullion to which they will line up this T post with to get this measurement. If you don't have a mullion to line it up and would like to have a 3 panel plantation shutter, you can also as you stated take your width and divide by the panels. But in this case please leave a note in the manufacturing notes that you would like x3 even panels and when we go to process the order we will confirm with you the exact measurements of all the x3 panels. If you are needing further assistance with measuring you can also book in online with a 1 on 1 video consultation to discuss this further via the following link iseekblinds.com.au/contact-us Or you are more than welcome to send us some images of the window to our [email protected] email and we would look forward to assisting you on your DIY journey. Thanks the Sales Team @ iSeekBlinds.

• 
  @ysmadhusudhanreddy184629 күн бұрын

  I already have set up automate roller blinds with remote last year. Now I want to buy a hub to connect to the app but not sure if the motors are compatible . How would I check the motors I have can connect to the hub?

• 
  @iseekblinds29 күн бұрын

  Thank you for reaching out. If you have Automate branded Motors, then the Pulse 2 Hub will work as they are from the same manufacturer. An easy way to confirm your Motor brand/type, is to take down the roller & pull out the motor. You will then be able to check the branding on the motor :) Please do not hesitate to reach out to our office, if you have any further questions - [email protected] Thank you!

• 
  @AwyeeahАй бұрын

  5 years later, still helping new people

• 
  @gordiolayАй бұрын

  Looks so easy when you do it but my joining link won't push onto the chain. Trying with pliers. Still no good. End chain ball keeps breaking off.

• 
  @peterdee1900Ай бұрын

  These look great. What a system. Do you know if these would integrate with Home Assistant or Apple HomeKit?

• 
  @IntrepidsRusАй бұрын

  Thank you

• 
  @yvonnesturgis5172Ай бұрын

  Available in US?

• 
  @iseekblindsАй бұрын

  No, sorry we only ship within Australia

• 
  @BelBel012 ай бұрын

  Great video! I fixed my sons blind effortlessly with your help. Thank you.

• 
  @iseekblindsАй бұрын

  Glad it helped!

• 
  @emmarafferty97722 ай бұрын

  Do these rails hold heavier curtains too?? 😊

• 
  @stevesilver32912 ай бұрын

  It depends on your substructure. If it is just drywall (there is thinner and thicker drywall) not so much. But, if you are connected to Wood, Concrete, Metal, yes.

• 
  @emmarafferty97722 ай бұрын

  @@stevesilver3291 thank you for the reply. Yes concrete I think

• 
  @katiecoynemypsychiceyes6662 ай бұрын

  Thank you from Scotland and from a complete novice DIY'er. Liked your video, big handsome guy.

• 
  @curiousandengaged55842 ай бұрын

  Great video - doing this tomorrow and joining two tracks Thanks

• 
  @DIGGERTREVOR2 ай бұрын

  Saved mate bought a new blind give it a tug and the chain dropped off LOL couldn't figure out how to get the bugger apart to put it back on you solved my issues . Thanks Aussie here :)

• 
  @Polyestergirl0052 ай бұрын

  Thank you! 🎉

• 
  @iseekblindsАй бұрын

  You’re welcome 😊

• 
  @CarolSimons-ny8tx3 ай бұрын

  great advice thank you very clear to understand

• 
  @iseekblinds2 ай бұрын

  Glad it was helpful!

• 
  @coriOcean3 ай бұрын

  how about if I have a "popcorn" ceiling? is it as easy? Do I need something different? It's a 70s building,

• 
  @edgardsouza35303 ай бұрын

  My roller blind is to tight to pull up,what do I do?

• 
  @joshuahoete20573 ай бұрын

  What side should the overlap panel be on

• 
  @manuoz35453 ай бұрын

  my Chain is cut. how to fix it?

• 
  @manuoz35453 ай бұрын

  my Chain is cut in the middle. how to fix it?

• 
  @maxineamon4 ай бұрын

  Chain fix for RollerBlind. In case you are here to reattach the chain for a Louvolite Shade System 40 clutch R3025, this is what you do Remove blind - steps to do this: - roll up blind (if you can with a little force, but not essential), push chain end in a direction it will move a little, usually up, push toward other end., it should now be detachable from chain end) Once removed, roll up blind if is not already Pull out mechanism on chain end from the roller tube - the whole chain enclosure mechanism should slide out - use a flathead screwdriver to ease out if necessary. Remove the plastic pin from point at the end, prise out with a small Phillips screwdriver in the hole if can't do manually Replace the chain - if it has a joiner the make sure it is placed close the mechanism on the side where the chain is chain is will drop down. Reverse process to refit. Note: the three lugs on the chain end should be faced upright, ensure blind is facing correct direction.

• 
  @ZackyDog4 ай бұрын

  It worked. Thanks, Michael.

• 
  @susibrown6555 ай бұрын

  How do you measure the size for the chain replacement? What does drop size mean?

• 
  @iseekblinds4 ай бұрын

  Hi @susibrown655, our chains are continuous loop which means there is no joining link. The size that you will see when ordering a chain is from 500mm to 2000mm. This size referred to the drop size of the chain which is measurement from the chain drive to the bottom of the chain. Ideally you want your chain drop to fall between your chest and belly button - this way it is not a safety issue for children - be sure to install a child safety device to secure the chain. Cheers Mike

• 
  @shahedkazi07025 ай бұрын

  How did you pre fit the brackets?

• 
  @iseekblinds5 ай бұрын

  Hi, the brackets are spring loaded and easily clip onto the track. You do this by clipping the front of the bracket to the front of the curtain track and push down on the back - when you hear a click its firmly in position. Hope this helps.

• 
  @paulmaxwell88515 ай бұрын

  Excellent video! I really want to motorize my blinds.

• 
  @iseekblinds5 ай бұрын

  You should!

• 
  @Ceeshore5 ай бұрын

  thanks, couldn't figure this out

• 
  @dadguru79735 ай бұрын

  Thanks for this it helped a lot!

• 
  @iseekblinds5 ай бұрын

  Glad it helped!

• 
  @user-rw8vy4fy8y5 ай бұрын

  Can you share the name of the packer/plaster anchor?

• 
  @iseekblinds5 ай бұрын

  You cannot buy them but we supply them with our curtain tracks. Bunnings has a number of other options you could use like wall mates or hollow wall anchors.

• 
  @rojithstanly91256 ай бұрын

  Where do you get this anchor? Thanks

• 
  @iseekblinds5 ай бұрын

  You cannot buy them but we supply them with our curtain tracks. Bunnings has a number of other options you could use like wall mates or hollow wall anchors.

• 
  @adorolivar13406 ай бұрын

  Hi can you put a plantation shutters on a balcony french door ? thanks

• 
  @iseekblinds4 ай бұрын

  Hi can you please send some photos to [email protected] and book in a video call with me and I will help you with this Cheers Mike :)

• 
  @marywoodbridge30486 ай бұрын

  Where do you get the chain joiner?

• 
  @iseekblinds5 ай бұрын

  blindpartsbydave.com.au/collections/roller-blind-parts/products/blind-chain-connectors

• 
  @shaniaturner30017 ай бұрын

  We have a big gap in the middle over the blind help

• 
  @iseekblinds5 ай бұрын

  Can you can send some photos to [email protected] and Michael will respond to you

• 
  @AndreaArlington7 ай бұрын

  WHERE DO YOU GET THE SUPPLIES PLEASE?

• 
  @iseekblinds5 ай бұрын

  Which supplies are you referring to?

• 
  @JUNO-697 ай бұрын

  This method obviously works great and looks very symmetrical but why no use of a stud finder to find the ceiling battens? Is it simply for the alternative spacing you suggest?

• 
  @iseekblinds4 ай бұрын

  Hi with the wall anchors we supply and the multiple brackets across the width I always use the plaster anchors which are fine and hold 10 times the weight of the curtain. When mounting the track to a wall I am generally more selective about where I fit the brackets. Cheers Mike :)

• 
  @JUNO-694 ай бұрын

  @@iseekblinds thanks mate i appreciate the reply. I ended up going with anchors as you suggested and spacing them more evenly across the ceiling regardless of batten positions. I’ve also been using your method of poking through with a small screwdriver to feel behind wall spaces and all sorts of areas to make sure I’m not drilling into any wires or pipes.

• 
  @Chris-tc8sm7 ай бұрын

  Thanks for your video but chain drive didn’t look like any of the ones yo showed. I had to pinch together the two ends that were on one side of the chain drive which allowed it to come apart so I could fit the new chain in. Unfortunately its still not working 100% as theres a chain joiner and i don't know how to position the chain so the joiner does reach the top of the chain drive before the blind is totally rolled up. So it rolls up 3/4 of the way but that will have to do for now.

• 
  @iseekblinds4 ай бұрын

  Hi Chris, check out this video @the 2min mark, I show you how to hold the chain drive to position the joining link in the right spot so you blinds will go fully up and down. cheers Mike kzread.info/dash/bejne/mIyKyJeHma-biMY.html

• 
  @andrewsmith34827 ай бұрын

  Excellent video, Thank you.

• 
  @iseekblinds5 ай бұрын

  Thanks for you feedback

• 
  @captainsman7 ай бұрын

  Thankyou sir 🙏

• 
  @iseekblinds5 ай бұрын

  Thank you!

• 
  @Iluvsnario7 ай бұрын

  Great video, thanks for sharing!

• 
  @gregwhittingham19098 ай бұрын

  When using the hub can the blinds work independently to one and other?

• 
  @iseekblinds4 ай бұрын

  Yes they can and you have multiple ways you can control them. Timers, scenes, automation through a home kit... the skies the limit :) Cheers Mike

• 
  @carmenwalton7038 ай бұрын

  Thanks so much for this tip. Couldn’t move the blind but now it’s off and ready to be cleaned. Top video.

• 
  @iseekblinds8 ай бұрын

  Glad it helped. Thanks for your feedback! Cheers iSeekBlinds

• 
  @johnd9429 ай бұрын

  Nice job. A pity the previously asked questions have not been replied to.

• 
  @iseekblinds5 ай бұрын

  sorry about that, Let us know if you have any other questions

• 
  @carlgrein29749 ай бұрын

  Fantastic video. Were do you get the Mikes recommend plasterboard wall anchors??

• 
  @iseekblinds5 ай бұрын

  You cannot buy them but we supply them with our curtain tracks. Bunnings has a number of other options you could use like wall mates or hollow wall anchors.

• 
  @tonybabic40819 ай бұрын

  That was a great video! Super clear and informative. Thank you!

• 
  @JaneBradford-tv9ft9 ай бұрын

  Can’t get my blind down, the end turns when I let it down and back up.

• 
  @iseekblinds9 ай бұрын

  Hi Jane, please call our office or send an email through to [email protected] to see how we can assist. Cheers iseekblinds

• 
  @mrandiie109 ай бұрын

  Great video ! Does I see blinds provide the tracker too ?

• 
  @iseekblinds9 ай бұрын

  Hi @mrandiie, if you mean the curtain track? Yes iseekblinds provides your custom made curtains in full complete with the curtain, track, runners, brackets, etc. Thanks for watching! Cheers iseekblinds

• 
  @kd49659 ай бұрын

  Very good video the best I’ve seen on the net . I’m looking at your websites now to buy some sheer