Cheapest I’ve seen it. Keep some for the blue helmets
@BOHEMIANHUNTINGCLUB15 сағат бұрын
🤔🤔👍😀
@Johnny-jr2lq17 сағат бұрын
They have their place but i would definitely dedicate a upper strictly for them. Aren’t they kinda excessively hard on the upper. I mean if the situation requires it who cares. But if a guy wants longevity out of said platform these are not the solution.
@cw2a23 сағат бұрын
In my best Schultz voice…"I see nothing, see nothing"
@jamespollard1670Күн бұрын
So what is so special about these ?
@harmungusКүн бұрын
Dollar a round, it had better be self-steering 😂
@englishrupe0123 сағат бұрын
@@harmungus Ummm....two dollars..
@harmungus23 сағат бұрын
@@englishrupe01 I'm not even going to go back and fix it, my math is bad today, all day
@englishrupe0123 сағат бұрын
@@harmungus Lol....no worries. Everyone has a Biden day occasionally ;-)
@boozeandbullets208423 сағат бұрын
@@jamespollard1670 these are green tip on steroids, closer to a blacktip 556 if you will
@mckwillyКүн бұрын
Every few months American Reloading will have pulled ss109 for sale
@unclejim2330Күн бұрын
$20 for ten? 🤷♀️🤭 do you know what they used to cost? 🤭
@boozeandbullets2084Күн бұрын
Doesn't matter what it used to cost if you can't buy it anymore
@oddballschtuffКүн бұрын
One more thing I can’t afford. New Mustang, new Jet Plane, M855A1 rounds💸
@unclejim233016 сағат бұрын
unless you still have some. 😂 It’s not that good anyway.
@boozeandbullets208412 сағат бұрын
@@unclejim2330 dont make a mistake and think this is ye olde green tip, its not, this is A1
@josephhaack57112 күн бұрын
Buy a real target if you are making a video… jeers h
@HobbiesHobo3 күн бұрын
Nice!
@oddballschtuff4 күн бұрын
What a cool gun
@jamespugh4 күн бұрын
Some nice finds.
@MegaBait16164 күн бұрын
Question : I was given the same .308 hand press and looks new wrapped in wax paper .. When I use a Dipper and check weighing the charge seems it + or - ,3 tenths of a grain ?? What do ya think about that ?? Subbed ya .... Thanks MB ..
@boozeandbullets20844 күн бұрын
yeah dippers are like that, pick a mid load so +/- .3 doesnt make it unsafe
@MegaBait16164 күн бұрын
@@boozeandbullets2084 , thanks MB ..
@mckwilly4 күн бұрын
Awesome find
@unclejim23304 күн бұрын
Love rolling blocks. 👍
@jamespollard16704 күн бұрын
That would be a good one for the rust blue process . You should give it a try .
@BOHEMIANHUNTINGCLUB8 күн бұрын
Good deal!!
@mckwilly8 күн бұрын
Good stuff 👍
@cw2a9 күн бұрын
🤘🏼❤️🩹🇺🇸❤️🩹🤘🏼
@brokeloader9 күн бұрын
Nice
@HobbiesHobo9 күн бұрын
The 3d printed stuff that people are doing is just getting better all the time! 1000 Subs! Excellent!
@unclejim23309 күн бұрын
Not my first choice but. 😂 Find me 16 ga shotgun stuff. 😂😂😂 Why didn’t you post the VZ kit here? We have a brace coming and the charging handle is sweet. 👍
@boozeandbullets20849 күн бұрын
check bowmanarms for the VZ kit
@corywilliamsmith13 күн бұрын
Link ??
@BOHEMIANHUNTINGCLUB13 күн бұрын
Some great finds👍👍
@mckwilly22 күн бұрын
Score !
@Johnny-jr2lq23 күн бұрын
Man you cleaned up on the mold all by itself !!!!! The 358-429 4 cavity is 124.08 on Midway right now. Nice brother I can’t see those deals going to anybody else better. The m67 is indeed corrosive and the brass is Berdan primed so it’s not easily reloaded. I have a little bit of it put up for a rainy day. When I picked it up that was the first thing that I checked. It does shoot fairly well though
@brokeloader23 күн бұрын
Man you got a heck of a score there.
@cw2a23 күн бұрын
You stole that mold!! I was gifted a 50 cal can of 8mm short time back. Guy said it was Russian... Its Turkish 😮😂😂 8mm and Corrosive.
@boozeandbullets208423 күн бұрын
everything else in the store was so expensive i didnt expect to find the molds, couldnt pass them up
@reloader7sixtwo23 күн бұрын
The M67 Yugoslavian ammo is berdan primed and corrosive, as you mentioned. The M67 ammo is excellent ammo and the projectile was design to destabilize much earlier to cause a more destructive wound channel. The bullet is also your standard all copper jacket lead core, so it range safe as well. Back in the day, I used to buy the White box Russian 7.62 ammo, it also came in a brown box as well. Both we loaded with a HP bullet, which is basically the standard Russian FMJ with the tip opened up which is what the Russian did to get by some importation restrictions by calling it hunting ammo. I used to buy it in ten box battle packs that were either wrapped in paper or plastic.
@boozeandbullets208423 күн бұрын
awesome
@unclejim233023 күн бұрын
Hopefully you moved the a better state. 👍 Good deal on the mold. 👍
@jamespollard167023 күн бұрын
Nice finds.
@Ml9123128 күн бұрын
Are the files ready for release soon, what do you think? Would like to assemble that bad boy.
@p47rr29 күн бұрын
I love Midwest Powders. But they seam to be all ways sold out.
@novicereloaderАй бұрын
Great information!
@baddestmofoaliveАй бұрын
American Reloading has them back in stock right now
@oddballschtuffАй бұрын
At least the primer will work in an emergency. I have some old military powder like that. It’ll work in a pinch, but I am not going to reload regularly with it.
@unclejim2330Ай бұрын
I wouldn’t use the Lee 230 even in a apocalypse. 🤭😂 too many baffle strikes, wish they would re design it though.
@boozeandbullets2084Ай бұрын
shoots fine for me
@BOHEMIANHUNTINGCLUBАй бұрын
One out of five could definitely cause a problem or two 👍
@jamespollard1670Ай бұрын
They would work in a pinch .
@HobbiesHoboАй бұрын
I imagine that we'd have a lot of interesting things to see & do during a real Apocalypse! haha
@user-jh9kz2fk5uАй бұрын
not design semi auto
@BOHEMIANHUNTINGCLUBАй бұрын
Group was good, not so bueno on the 2 bad strikes though. Nice test run👍
@unclejim2330Ай бұрын
Ok so they marked the FS primers “pistol” because they had softer thinner cups? I assume you used a case gauge on the brass because many times factory BLK brass can fall below min. 🤷♀️
@boozeandbullets2084Ай бұрын
my only gauge is my barrel
@cw2aАй бұрын
💥👍🏼👍🏼💥
@brokeloaderАй бұрын
👍
@mckwillyАй бұрын
Good stuff 👍
@oddballschtuffАй бұрын
Looks like the groups were good. Interesting on those two cases🧐
Пікірлер
Cheapest I’ve seen it. Keep some for the blue helmets
🤔🤔👍😀
They have their place but i would definitely dedicate a upper strictly for them. Aren’t they kinda excessively hard on the upper. I mean if the situation requires it who cares. But if a guy wants longevity out of said platform these are not the solution.
In my best Schultz voice…"I see nothing, see nothing"
So what is so special about these ?
Dollar a round, it had better be self-steering 😂
@@harmungus Ummm....two dollars..
@@englishrupe01 I'm not even going to go back and fix it, my math is bad today, all day
@@harmungus Lol....no worries. Everyone has a Biden day occasionally ;-)
@@jamespollard1670 these are green tip on steroids, closer to a blacktip 556 if you will
Every few months American Reloading will have pulled ss109 for sale
$20 for ten? 🤷♀️🤭 do you know what they used to cost? 🤭
Doesn't matter what it used to cost if you can't buy it anymore
One more thing I can’t afford. New Mustang, new Jet Plane, M855A1 rounds💸
unless you still have some. 😂 It’s not that good anyway.
@@unclejim2330 dont make a mistake and think this is ye olde green tip, its not, this is A1
Buy a real target if you are making a video… jeers h
Nice!
What a cool gun
Some nice finds.
Question : I was given the same .308 hand press and looks new wrapped in wax paper .. When I use a Dipper and check weighing the charge seems it + or - ,3 tenths of a grain ?? What do ya think about that ?? Subbed ya .... Thanks MB ..
yeah dippers are like that, pick a mid load so +/- .3 doesnt make it unsafe
@@boozeandbullets2084 , thanks MB ..
Awesome find
Love rolling blocks. 👍
That would be a good one for the rust blue process . You should give it a try .
Good deal!!
Good stuff 👍
🤘🏼❤️🩹🇺🇸❤️🩹🤘🏼
Nice
The 3d printed stuff that people are doing is just getting better all the time! 1000 Subs! Excellent!
Not my first choice but. 😂 Find me 16 ga shotgun stuff. 😂😂😂 Why didn’t you post the VZ kit here? We have a brace coming and the charging handle is sweet. 👍
check bowmanarms for the VZ kit
Link ??
Some great finds👍👍
Score !
Man you cleaned up on the mold all by itself !!!!! The 358-429 4 cavity is 124.08 on Midway right now. Nice brother I can’t see those deals going to anybody else better. The m67 is indeed corrosive and the brass is Berdan primed so it’s not easily reloaded. I have a little bit of it put up for a rainy day. When I picked it up that was the first thing that I checked. It does shoot fairly well though
Man you got a heck of a score there.
You stole that mold!! I was gifted a 50 cal can of 8mm short time back. Guy said it was Russian... Its Turkish 😮😂😂 8mm and Corrosive.
everything else in the store was so expensive i didnt expect to find the molds, couldnt pass them up
The M67 Yugoslavian ammo is berdan primed and corrosive, as you mentioned. The M67 ammo is excellent ammo and the projectile was design to destabilize much earlier to cause a more destructive wound channel. The bullet is also your standard all copper jacket lead core, so it range safe as well. Back in the day, I used to buy the White box Russian 7.62 ammo, it also came in a brown box as well. Both we loaded with a HP bullet, which is basically the standard Russian FMJ with the tip opened up which is what the Russian did to get by some importation restrictions by calling it hunting ammo. I used to buy it in ten box battle packs that were either wrapped in paper or plastic.
awesome
Hopefully you moved the a better state. 👍 Good deal on the mold. 👍
Nice finds.
Are the files ready for release soon, what do you think? Would like to assemble that bad boy.
I love Midwest Powders. But they seam to be all ways sold out.
Great information!
American Reloading has them back in stock right now
At least the primer will work in an emergency. I have some old military powder like that. It’ll work in a pinch, but I am not going to reload regularly with it.
I wouldn’t use the Lee 230 even in a apocalypse. 🤭😂 too many baffle strikes, wish they would re design it though.
shoots fine for me
One out of five could definitely cause a problem or two 👍
They would work in a pinch .
I imagine that we'd have a lot of interesting things to see & do during a real Apocalypse! haha
not design semi auto
Group was good, not so bueno on the 2 bad strikes though. Nice test run👍
Ok so they marked the FS primers “pistol” because they had softer thinner cups? I assume you used a case gauge on the brass because many times factory BLK brass can fall below min. 🤷♀️
my only gauge is my barrel
💥👍🏼👍🏼💥
👍
Good stuff 👍
Looks like the groups were good. Interesting on those two cases🧐
Might be fine with a 20 gr. Charge?
i was going to try subs too
I saw those and was questioning them
posting results in a few
Interesting, what about testing in pistol?
going to do that as well
Never heard of factory seconds primers before!
new to me too