Пікірлер

• 
  @eddale5557Ай бұрын

  Lol must be loctite on those skruvs haha!

• 
  @tonkie1131Ай бұрын

  Just what I needed to view, got to change my brake lever after a drop and wasn’t sure if I would be capable of doing myself, so thanks I will attempt it myself

• 
  @ThaRealChiefObiEgusi4 ай бұрын

  How is the quality?

• 
  @adventurex48833 ай бұрын

  I really enjoyed them, they were solid.

• 
  @emiero7 ай бұрын

  Great, thanks!

• 
  @marekryszard7 ай бұрын

  I reset my tripmeter to 0. When I do about 300 miles, I clean and lube the chain every time. I've been using simple kerosene to clean the chain. It's inexpensive & very effective, recommended by many motorcycle mechanics. Works well to clean my aluminium rims and spokes. I'm using Motul chain lube so far. When that can runs out I'll use Dupont "Chain Saver" wax lubricant. I live in Southern California. I try to avoid riding in the rain, although sometimes I get caught in it. Am considering purchasing one of those spiral brushes. Looks a bit fiddley to get on the chain, though. Thanks for posting this video.

• 
  @nathanguymer27568 ай бұрын

  That plastic bin will deffo not rust now!!

• 
  @cloudbasenirvana8 ай бұрын

  Are you on Rumble as YT now want paying to view your vid

• 
  @lold61309 ай бұрын

  XCP is the best product to protect a motorcycle......kzread.info/dash/bejne/qXabqJJweZq6gbA.html

• 
  @arcano457110 ай бұрын

  How tall are you?

• 
  @coobye11 ай бұрын

  Hi, what brand is that gps holder/bar. Cheers

• 
  @andrewstewart10611 ай бұрын

  The bar piece was an eBay find, and the bracket on the bar came with a Givi phone holder

• 
  @coobye11 ай бұрын

  @@andrewstewart106 Cheers, appreciate it👍

• 
  @sortahealthygamers11 ай бұрын

  Thank you ! 🔥✌️

• 
  @gavinbroad174311 ай бұрын

  How did you get that bottle to mist? Mine just squirts.

• 
  @andrewstewart10611 ай бұрын

  I found a bucket of warm water helped. Leave the spray bottle in it for around 20-30 mins. The ACF 50 should thin down a little. I made the mistake once of using water straight from the kettle and melted the bottle, never sprayed right after that. I then moved to a gravity fed gun for a compressor.

• 
  @gavinbroad174311 ай бұрын

  @@andrewstewart106 I actually bought a separate lot off eBay that came with an ACF-50 spray bottle and that doesn't mist either. 🤷🏻‍♂

• 
  @andrewstewart10611 ай бұрын

  @@gavinbroad1743 I had a couple of the small ACF 50 spray bottles, more of a jet than anything, and created a sloppy mess. I found the most reliable was a small compressor and a gravity fed gun, I used probably 70% less ACF than the spray bottles as it’s much more efficient at misting.

• 
  @gavinbroad174311 ай бұрын

  @@andrewstewart106 OK, yes, I have that kit, so that's what I'll have to do. Did you still warm it with the gravity fed gun?

• 
  @Netolldl Жыл бұрын

  What is the model of your crankcase protector?

• 
  @andrewstewart106 Жыл бұрын

  This vid doesn’t have a crank case protector. At least not one I installed, all stock from purchase. Covering the rear wheel protecting the shock is the genuine Honda rear hugger. Also in my later vids I installed the Rally Raid bash plate which does offer a bit of protection for the crank case.

• 
  @malcolm8564 Жыл бұрын

  So now the LH footpeg is pivoting on the thread of the screw?

• 
  @andrewstewart106 Жыл бұрын

  Yes, that’s what givi provide for attaching to the passenger foot peg.

• 
  @kingriverside5548 Жыл бұрын

  how can I get the adapter? 10:23

• 
  @andrewstewart106 Жыл бұрын

  The exhaust adapter from memory came with the panniers, Dolomiti 36. Maybe give Givi a call and see if it’s a spare part that can be ordered separately.

• 
  @michaeljohnson3162 Жыл бұрын

  Thanks a tone for this :) Great find

• 
  @rosarioroberto5823 Жыл бұрын

  Greetings As always another fantastic detailed video 🇺🇸🎉🍾🇺🇸 Would you provide me with the link to purchase the bar ends you have on your motorcycle, thank you so much for assisting me. Keep producing more videos.

• 
  @a13jo Жыл бұрын

  Where do you got the cellphone bar? I need one like that. link please!

• 
  @seanb1081 Жыл бұрын

  Thanks for the great vid Mate. I recently just bought a 2nd hand 2020 CB500X here in Australia. Previous owner had it kited out with the full Rally Raid Lvl 1 system. It absolutely smooths out the tracks and the road! I haven't done a lot of, off roading yet, but the bit I have done, the bike handles wonderfully. The bike did come with Tubeless "Mitas E-07+ ENDURO TRAIL" Front and rear tires, which definitely help with grip in the rough and the slippery stuff.

• 
  @gordongrant8294 Жыл бұрын

  Hi there, can you tell me where you got the handlebar mount from, I have searched the Internet but can't find one like that. Thanks Gordon

• 
  @anthonygebala1198 Жыл бұрын

  Great video but it would be better if Honda fitted them as standard

• 
  @rabbieg09 Жыл бұрын

  If I was to get it on grips etc, how do you safely remove please?

• 
  @wesleyshinto Жыл бұрын

  Nice SKX man, going to tackle this tomorrow morning on my 500X!

• 
  @kevindarkstar Жыл бұрын

  Tbh as soon as I saw you approach the cattle grid at an angle my bum tightened up 🥴

• 
  @kevindarkstar Жыл бұрын

  Must be honest, that's shity weather for those passes, I'd only do it in summer and dry weather personally, but well done sir, good ride, 👍🏻

• 
  @andrewstewart106 Жыл бұрын

  Thank you. This ride was in between the 2 lockdowns in 2020. It was the tail end of summer. Checkout the other 2 vids on my Chanel for Hardknott and Wrynose pass. It was 30 degrees and clear blue skies 24 hours later.

• 
  @kevindarkstar Жыл бұрын

  That gearbox sounds quite notchy

• 
  @creatamax16 Жыл бұрын

  Thanks for making the video, was looking at the Enduristan Lyndon organizer thats how i got here. Could i ask what the blue adjustable wrench extender pipe was from?, i know any old pipe will do but that looks quite well made for the job?. Cheers Mike

• 
  @andrewstewart106 Жыл бұрын

  Thank you for your comment. The pipe was cut from a J Hook for garage storage. Similar to this, but I took the spanner to my local DIY store and selected a hook that would be the right diameter for the spanner handle. Garage Storage Heavy Duty J Hooks, 6 Pack pipabiba Wall Mount Steel Utility Hanger (11.5cm x 10cm) amzn.eu/d/iDgBX5O

• 
  @ryanpa2000 Жыл бұрын

  I know this is now quite old but this is what I shot from the start of the event the night before.. kzread.info/dash/bejne/g3iL0dCwkpm_gMo.html

• 
  @ryanpa2000 Жыл бұрын

  Nice one, do you happen to have a GPX file of the whole route? I've started doing some of them as I'm only in Whaley.

• 
  @f.i.l.d.e.p.s Жыл бұрын

  i think you should just grab hold the brush to force the bristles in to the chain links instead of stretched and pinch held

• 
  @dancetech Жыл бұрын

  unbelievable that a company as innovative as Honda couldn't have added a quick fit/release pannier system incorporated into the side pillion grab bars like Kawasaki did with the Versys, rather than making the user add a load of ugly & bulky scaffolding which most of the time you dont want on the bike

• 
  @BCorey-ln9se2 жыл бұрын

  Dude the slurping and wheezing....

• 
  @TheKingKrusher2 жыл бұрын

  Such amazing videos, love your channel. 👍🙂

• 
  @macalacalan11752 жыл бұрын

  I can intimately attest to the cold, wet conditions and stunning beauty of the region depicted in your video- having ridden almost exactly the same route on my Dawes Galaxy in 1978 (up and over at Pen Y Pass with a welcome break at ‘Clanberris’ before riding on to Caernarfon). Unfortunately Mount Snowdon was completely hidden. Now, 44 years later, I prefer to sit astride the saddle of my gorgeous 2021 Honda CB 500x (Grand Prix red) and letting it do all the work - half a world away in a state ‘down under’ where the words ‘snow’ and ‘mountain’ refer to unknown concepts. Thank you for the great video.

• 
  @eileenmoxon95282 жыл бұрын

  At last someone is using the right bike for the job.

• 
  @999fugazi2 жыл бұрын

  Great test. My original ACF50 spray head broke and I have tried a few kitchen spray bottles as a replacement but none have had the power to lift the heavy liquid. I will be getting one of these now.

• 
  @anthonygebala11982 жыл бұрын

  The givi products seem good quality,great video 👍

• 
  @ezekielgskeen86072 жыл бұрын

  just ordered the mist bottle, for my motorcycle, But! will get a compressor, that comes with several appliances Like spray gun and tyre pump and air hose for my staple gun. But! for now! awesome thanks for a great info video

• 
  @ezekielgskeen86072 жыл бұрын

  am ordering one, awesome video, thanks for a great breakdown

• 
  @inrptn2 жыл бұрын

  Have you moved on to a different bike now or still on this one?

• 
  @andrewstewart1062 жыл бұрын

  I don’t currently have a bike.

• 
  @jesusanzola2992 жыл бұрын

  what is the cellphone case code part from givi ?? Thanks

• 
  @daveblenkiron60112 жыл бұрын

  Hi great video, can you tell me if the screen and mirrors were coated? If so why, if not why not?

• 
  @andrewstewart1062 жыл бұрын

  I think I may have given the screen and mirrors a once over with a cloth. Shouldn’t need to coat them or other plastic areas, ACF if for preventing corrosion but I also found it provided a nice finish on the non vital areas once cleaned.

• 
  @daveblenkiron60112 жыл бұрын

  @@andrewstewart106 thanks appreciate you responding

• 
  @smbutte2 жыл бұрын

  Thanks, that was an informative video. May I ask that should the bike have bar risers, would the longer screws of the kit allow for the installation of the S901A? Thanks.

• 
  @andrewstewart1062 жыл бұрын

  After this video I added some universal bar risers. Yes it can fit. The riser kit came with multiple length bolts, I honestly can’t fully remember but I may have had to order 2 slightly longer bolts. I think with a little rise it was fine. But with all the universal plates in, like I had, I had to source the longer bolts.

• 
  @smbutte2 жыл бұрын

  @@andrewstewart106 Thanks Andrew for the prompt response. Yes that all makes sense and should allow me to progress with the purchase. Wishing you all the best.

• 
  @nativealaska2 жыл бұрын

  Cb500f here just to check this one only needs one screw right because I took two off the original break lever

• 
  @jamesfoo89992 жыл бұрын

  Unfortunate, you weren't even pushing it or being crazy. Lovely ride, and views!

• 
  @fidanym2 жыл бұрын

  A bit late to the party but I have the same one and I find it much more convenient mounting it the other way around. That way the magnets are much higher up, the bag is flush up against the tank and I've had no issues running it without any straps, even at high speeds.

• 
  @ike82362 жыл бұрын

  It's a pretty good bag, maybe a little too small and the strapping system was very poorly thought out. Besides that though it's served me well.

• 
  @nickfry77052 жыл бұрын

  Blimey, didn't that go down easily in the grid? I'll watch out on them things in future. Good Vid thanks.

• 
  @Allen-Doe2 жыл бұрын

  Hey, About the exhaust, I have the 2018 Honda CB 500x, Do you think a straight pipe/full system will be much louder. I want it much louder than the slip on

• 
  @conorlooney63912 жыл бұрын

  A very helpful video, got a few nice tips..love the fact your narrative was to the point,no unnecessary waffle.cheers.