Пікірлер

• 
  @SammyRavageКүн бұрын

  Wonder if this is why my battery keeps going dead

• 
  @MatthewsSloanКүн бұрын

  That's the original sling. I've got the exact same thing.

• 
  @cliffbeasley25 күн бұрын

  Is this video a joke?

• 
  @user-tc3ou6sy5f6 күн бұрын

  At 50 yards ?? That sucks ! Should be able to hit a dime at 50 yards !

• 
  @dougshelton699 күн бұрын

  2024 100$

• 
  @Scorpion2410 күн бұрын

  I mean 300lbs dude come on man. You knew better than that

• 
  @charleswaynewright204210 күн бұрын

  Maybe you should go to your vacation and do a video when you get back tag it back from vacation . Check U Later

• 
  @RedRoger55914 күн бұрын

  I've had this safe for 4 or 5 years now. Still works great. My only issue is that I can't silence the keypad beep. Directions say to hold all 3 buttons for a few seconds. Not working for me.

• 
  @bigtrev76115 күн бұрын

  🇦🇺😎👍

• 
  @dedeeprice656016 күн бұрын

  List you don't have my problems No you wanna talk about a shitty linkin m k z Management everyday, you have to get up and jump. Start your car because of the radio inside it Hi bixby we're out there one night took a picture just to show I have the twenty eighteen lincoln black label m k z Twenty speaker revere ultimate sound system Now the problem with that is got a giant punala amps in it And they don't shut off they never go off So every morning I have to get up and jump start my car In the other day, the bastards sit there and said something about a break pedal sensor fault. I didn't just wouldn't start it all Add, you know. I got it. And it was old years old. But I only had twenty thousand mile twenty four thousand miles on it They're going to go it's very rare to find one with this little mileage Not with The car just dying every night I didn't need him to be jumped every morning You know why he didn't drive it much because he got tired of junk starting the damn thing. So once you get that fix the tribute o k

• 
  @oyousef1119 күн бұрын

  Me watching this in 2024 and I paid 1200 for a ZPAP 😅

• 
  @BosunSodeinde24 күн бұрын

  Thank you, this helps some of us that are not interested in shooting 10k rounds out of a gun to make a good decision.

• 
  @gew4325 күн бұрын

  this thing with a shorten mag looks like a g43 lol

• 
  @Ruby_SterlingАй бұрын

  Can you swap out the furniture with real AK furniture?

• 
  @willkrigbaum7780Ай бұрын

  Draco should be 556 and not 762

• 
  @jeffreyholliday1Ай бұрын

  Did you make your own sides or buy them?

• 
  @gbarthgwtАй бұрын

  Well, I watched this video and it is pretty good illustration of how to do a field strip and assemble a High Standard Flite King slide action shotgun but man oh man the nomenclature you use is wanting to say the least. Here are some of the things I noticed that could easily confuse anyone who finds a broken part in their Flite King 12 ga. shotgun and who is trying to get a replacement or could confuse anyone wanting to know the names of the parts you are talking about: Flat head screw - first of all the screw head is rounded. It is called the magazine cap screw. The plug stop???? Do you mean the end piece (that is the part out of which you took the screw) and the magazine cap (the cap under or behind the end piece)? You failed to mention there is (or should be) a spring between the end piece and the magazine cap. “Another tube stop”, that is the magazine follower? The take-down of this “front part” I am pretty sure you mean the the receiver. When you talk about the pin, that you removed to take out the trigger guard assembly, it is commonly called the trigger guard retaining pin (aka: the trigger guard pin)? When pushing out the cross pin from the receiver, to remove the trigger assembly, you used what appears to be a conical punch narrow at one end and getting wider as you move toward its handle. Aren’t you concerned, that over repeated disassembly attempts, that type of punch will widen the hole in the receiver as you hammer it to the point where the pin is wider than the hole and thus the pin will no longer stay properly in place? After taking out the trigger assembly you talk about a little metal piece, the long piece that came loose upon removal of the trigger assembly, that is the right shell stop. It just makes it so much easier to understand when correct nomenclature (or at least commonly used nomenclature) is used. As I said though pretty good illustration of how to do it.

• 
  @tedwilson2275Ай бұрын

  good vid.

• 
  @Maurice895Ай бұрын

  I took my first Fox Squirrel with that back in 90.

• 
  @Maurice895Ай бұрын

  My DAD'S was a 12 gauge, that's what I used. My mistake IntoWeapons.

• 
  @maudithiverАй бұрын

  Hum…. MKZ? 2007? Maybe a zephyr!

• 
  @justanothergunnerd8128Ай бұрын

  What handguard is/was that? It's really cool.

• 
  @pauldavis9387Ай бұрын

  Have you see the Pmag Gen 3 magazines with this? I have one that I bought a couple of years ago and it does not allow the Pmag Gen 3 to lock in.

• 
  @robertt1934Ай бұрын

  U posted this 11 years ago TG . Here it is 6/15/24 I bought my gun in 2014 , at the same time I purchased 10.000 CCI rounds . I have 500 rounds left & last week it went down on me , miss firing.. thanks 🙏 to your post it walked me thro the process “two broken springs “ S&W was NO HELP in getting springs or a hole new Firing Block Told me they no longer stock items for the 22LR , so I’m on the hunt for a spring Kit !!! Hopefully I’ll fined something at a jeweller.. anyways kudos for the video

• 
  @charleshodge1873Ай бұрын

  Take the bolt apart. Use a Dremel & polishing compound to polish every part of the bolt and seer contact face. Then polish the trigger contact point as well to smooth surfaces a little. You aren't removing significant material, just smoothing mating surfaces. Bolt will cycle like butter and trigger will be profoundly smoother.

• 
  @charleshodge1873Ай бұрын

  The model 780 uses many of the same parts as the model 25. The 780 has a hooded front sight IIRC. Uses the same detachable magazines.

• 
  @darrelwhite2649Ай бұрын

  Pretty decent review...but what's a "conner bore"??? LOL JK

• 
  @bigbadjohnpesek9894Ай бұрын

  I got mine from classic arms years ago. I got to say mine is damn near perfect. And thank god they didnt cut holes in my handgaurd or safety lever.

• 
  @kimers137Ай бұрын

  What about the rear and front sight?? Can they be removed without damaging any of it?

• 
  @973newarkavelli9Ай бұрын

  Does yours jam? Or double feed

• 
  @angelobryan46992 ай бұрын

  Revolvers never jam right

• 
  @user-oh9yc5mt3o2 ай бұрын

  Nice

• 
  @user-oh9yc5mt3o2 ай бұрын

  Kool

• 
  @kevinschneider93452 ай бұрын

  Thank you very much for the video. Even though I thought I was being careful, the detent and spring went flying.

• 
  @robertg5322 ай бұрын

  Hi I have a friend who owns a Vz2008 and when he bought it, it had what you had a folding stock, and was just a pain when I tried it as well and I saw your video and perfect, I was thinking if the seller you bought it from Ebay still has some still on stock would appreciate it if you cold send me his link. I'm helping him out looking for one. Did it come with the hardware? I searched the sellers name on Ebay and nothing is popping up. Appreciate assistance on this matter. Thanks. Stay safe.

• 
  @steverussell66422 ай бұрын

  Was this a good car for you? Found one with 80,000 mi on it for 6k

• 
  @dougbell5122 ай бұрын

  Some of the PSLs come in 26.5 barrel, others 23 or 24 inch barrels. How is this and why? I am actually trying to find one in 26.5 length

• 
  @jerryprice54842 ай бұрын

  I had one of these, traded it in on a .45 auto back in 1972

• 
  @codyg77892 ай бұрын

  Lasers suck. Dont need one in a gunfight. Got a bodyguard for almost nothing because the laser quit. Great little back up though. Havent had an issue with it cycling. Of course if im down to the .380 things have gotten really bad. Of course it doesnt weight much more than the spare mags for my full size and commander 1911s that i pack with it. One is none, two is one and three may be enough. Only using a pistol to shoot my way to my rifle anyway. But, i have no doubt the little thing could save my ass in a pinch.

• 
  @dbriggs16892 ай бұрын

  Great video. Thanks for all the information.

• 
  @Carterwray12 ай бұрын

  Glad to see mines not the only one that kicks like a mule. I swear they just used the x39 gas blocks with no adjustment. Going to try a kns piston eventually.

• 
  @gregboggs47212 ай бұрын

  The dings are cool. Battle scars

• 
  @MichaelSilvestri-yr7um2 ай бұрын

  I could have sworn I seen a brand new one not long ago

• 
  @golevka2 ай бұрын

  this is ASMR for me

• 
  @krcf39123 ай бұрын

  thank you bro

• 
  @andrejohnson61013 ай бұрын

  Just got mine but got the warsaw instead of nato lenth warsaw is a little shorter and mines a left side folder 🤦🏿‍♂️

• 
  @sirmcpablo73493 ай бұрын

  "Sks runs about 300 dollars" man I miss those days.

• 
  @strokerstang13 ай бұрын

  I have owned this in .25 ACP for close to thirty years, and for the life of me I have never been able to get the slide off, no matter what I do.

• 
  @patrickfauconnet66403 ай бұрын

  Immigrated to South Africa from France in 1982. I always did love guns and when I was in France I could only buy ruffles and black powder hand guns. My first revolver I bought was a Remington 36 caliber black powder hand revolver. Very beautiful but very messy. I did own few Commemorative Winchester, then moved to South Africa when not long after my arrival I noticed that White peoples ad guns, mainly for self defence. I then did apply for a gun license and got authorised to own a gun. Few days later did go to a gun shop and bought a Smith and Wesson 357 magnum with a 4 inches barrel model 66. I really did love that revolver, great design revolver with fantastic grip. Now I’m in Australia where we can not possess a gun😞

• 
  @CubanFrapAddict3 ай бұрын

  Mine throws the trigger spring lose when shooting light loads on the #2

• 
  @deanhoward41283 ай бұрын

  I have a High Standard " Pointer" with a 29" barrel, it looks almost identical to the one you have. I have no owners manual & any information you have would be greatly appreciated!