Good idea! Thanks! I have a broken patio table and a sheet of warped plywood in the back yard!
@yoashuain18 күн бұрын
Thank you for this. I'll stick to aluminum casting with pla.😊
@t.michaelbodine434114 күн бұрын
Anybody remember the 1981 movie Dragonslayer? This really looks like the magical spear from that one.
@user-uq4ht2he6y18 күн бұрын
This water filtration system initially worked so well that I purchased a second one. However, when it was time to replace the filters, the system stopped working. It was a headache trying to get customer care to return my calls and figure out the problem. The system was bypassing the filtration process, resulting in no filtered water. After over a month of struggling with this issue and receiving minimal support from customer care, I finally gave up and replaced the entire system with a different brand. I was very disappointed with the lack of support from Express Water and probably won't be buying from them again, as I expect a company to back up their product when customers need assistance.
@TreasureGeoАй бұрын
Think you didn’t run the vacuum long enough before pouring
@sammylyons5784Ай бұрын
I am trying to 3d print with wax resin currently. What trouble shooting worked out for u ? Your prints look amazing.
@TreasureGeoАй бұрын
When all said and done it’s worth your money to just buy a purpose built burnout oven.
@RealProjectTubeАй бұрын
Agreed 👍
@juanfranciscodehoyos8839Ай бұрын
Excellent, but i think if you put in the right side of cabinet you have a plenty acces to gauge and UV lamp when time is come to replace it.....IMO
@beshkamalАй бұрын
What was the air pressure that you used first
@mman6283Ай бұрын
Thanks
@editsoficial-ex1inАй бұрын
Sera que da para Fazer grillz desse jeito??
@andyhoffman2666Ай бұрын
Thank you. Good video. Appreciate the details about LG steam dryer. Wiring & parts seem essentially identical though obviously a different model. Hope you do more videos on electro mechanical fixes & upgrades, like installing water purification, upgrading sockets to include usb, led light fixture, upgrades, etc. or whatever your trained or exoerience or professional skill set is. We did miss how you installed back rollers, etc., but will find out today. We LUCKED OUT that lint accumulation near ELECTRIC HEATER DID NOT START FIRE, as lint accumulation was so great that it wrapped around & felted around one roller so severely that it broke. (Definitely loose & broke tetaining clip.) All 3 other rollers were ok but were also wrapped with only a litlle lint & clips intact. We clean lint trap after each use & vents annually & outside vent with animal guard monthy. (Should make vacumn nozzle that can reach down to bottom of dryer trap lint catchment as can see lint down there.) Dryer is about 14 years old. First time that we've opened it. Shocked by how much lint accumulated. HOW DOES SO MUCH LINT GET INSIDE DRYER. WHERE IS THE LINT LEAK???? Front panel, blower, etc. Heard it could be the drum that leaks lint, especially if vent clogged. LG Dryers need to be easier to open to inspect & clean lint & be part of periodic maintenance schedule. Disassembled & cleaned everything thus far but the motor which was just vacumned. (Did remove hair wrapped around motor spindle to blower.) Great dryer! Hope it is good for another 15 years with periodic internal inspections for lint!
@thastinger345Ай бұрын
So we finally discover where all the 10mm stuff goes.
@chriskennedy57262 ай бұрын
21 ppb is not good. Drinking water should be less than 5 to 0 ppb from a filtration system. Either this system is not working or ready to drink.
@RealProjectTube2 ай бұрын
Total dissolved solids (TDS) A good TDS level for RO water is 10-50 ppm, but RO typically reduces TDS to under 25 ppm
@hrios30162 ай бұрын
where the front and back rollers the same?
@RealProjectTube2 ай бұрын
Yes they were the same.
@dsanmiguel402 ай бұрын
Is it made in US
@wrightsong2 ай бұрын
... To be continued...
@insertgoodname48092 ай бұрын
Good job man. Protect your family.
@edwardtroendle70412 ай бұрын
I wish my city water was that good I'm sitting in 390-450 tds it's crazy
@ndion353 ай бұрын
Do you have a video on how to change the rom alk pac n uv light
@RealProjectTube3 ай бұрын
I don't, I actually just changed most of those last weekend. It was pretty straight forward, just the reverse of the install.
@ugochukwunwankwo96433 ай бұрын
Did the installation affect the water pressure to you sink?
@RealProjectTube3 ай бұрын
I didn't notice any difference.
@mhcvel3 ай бұрын
Hello, saw ur previous video now this and did installed model that comes with UV+ALK and was wondering if ION filter is it really required even if you have UV or ALK? Thanks.
@johnerway72554 ай бұрын
The filter housing should be vacuum cleaned every year to help with the build up of lint.
@darkshadowsx59494 ай бұрын
i need specially designed metal tools made at work and there's no way they would go for a 150k+ metal printer when its not used for production. its only to support the assemblers. i was hoping you would review the 17-4 filament as the bronze & copper is practically useless for absolutely everything. also they sell inline filament heaters now that's suppose to help with the breakage.
@xDevoneyx4 ай бұрын
Too much talk and too much still picture IMO. I was hoping to see a lot of cast results too.
@RealProjectTube4 ай бұрын
yea you should probably just stick to shorts then as you have the attention span of a 3yo....I say good day sir!
@xDevoneyx4 ай бұрын
@@RealProjectTube You don't seem to take raw criticism very well. Next time be sure to show the cardboard box of the products for 2 minutes at least. Maybe it gets more interesting then 😂😂
@RealProjectTube4 ай бұрын
@@xDevoneyx Clearly you know how to make content better then me with your 44 subscribers and 11 videos...
@BradleyDWoods-pz8rv5 ай бұрын
Hi. I'm the Founder/ceo of The Virtual Foundry. Your first review was helpful for us. Your followup was also helpful. It's been quite a few years since your last review. I've put years worth of effort into make this process easier. Our newest instructions for sintering bronze and copper have a 95%+ success rate. Also, the filament is MUCH easier to work with (it's not brittle). Anyway, if your up for reviewing the newest version, please reach out. I'll set you up with an evaluation kit free of charge. No strings attached, of course. I'd expect you to present your honest opinion. The process has become so refined and simple that I'm confident you will wind up with a really nice metal 3d print. Please reach out if you're interested.
@iPhilyaw450r5 ай бұрын
I appreciate it Sir.
@crazyinnocentturtle5 ай бұрын
Do yall think it taste like coconut
@kevinm32735 ай бұрын
So the filter only works for the faucet given and not on the main house faucet?
@RealProjectTube5 ай бұрын
Correct, its just for drinking water. Although I hooked mine up to my refrigerator ice maker as well.
@thedummiediego90595 ай бұрын
The drain saddle package doesnt fit the pipe any thoughts????
@RealProjectTube5 ай бұрын
All you really need to do is figure out a way to keep the tube from coming out of the pipe. Maybe some hot glue or a zip tie?
@sandraisaak38025 ай бұрын
Best do that extra gently. I would use walnut shell instead of sand. Next burn it in the oven or a wood fire.
@karlhill1155 ай бұрын
I normaly build a good wood fire then throw it in the coals after the logs burn down to coals.
@dreamstate8955 ай бұрын
Nice and straightforward explanation, thank you
@jeanladoire41415 ай бұрын
The original piece was hollow all trough until the tip, to save weight. Isn't 12% tin a bit much ? what about a 9/10% tin ? It would be much tougher
@elizamata47296 ай бұрын
Thank you so much for the great video! It helped me a lot!
@Rolanditou6 ай бұрын
If you guys see how I used to do it back in Cuba which is a communist country, Im talking about third world shit, I used to put the flask, which was just a copper pipe cut, on top of just and electric furnace with an aluminum pot on top, for 5 hours straight, and then cast in a centrifugal casting 😂
@alexanderrosalez87976 ай бұрын
Any recomendations on where to look to get my points on the bed? Ive looked and looked but everything i find is older and it doesnt match with the newer software....
@RealProjectTube6 ай бұрын
The points should be defined somewhere in the source code...I have no idea where though.
@AshModz3696 ай бұрын
You should add more meta data. Regular/hash tags. Make shorts and link the original video. Just give TY what they want! So they can best recommend your videos. Check out the "remix" button on your videos page from your phone. Top right corner you can change from 5/60sec. You can also upload from your phone and covert/edit into a short. Tags are so important I believe. More important than a nice description which is just word vomit. Tags narrow down what words matter. Also have the same words you tag also in your description.
@AshModz3696 ай бұрын
Water sucks. Gatorades better.
@AshModz3696 ай бұрын
Gatorade has electrolytes. It's what plants crave. 🤤
@DrDennis2 ай бұрын
Full of cancer causing sugar!
@AshModz3696 ай бұрын
Idk what this is but I want one. Looks cool, like part of a time machine. ⏲️
@lindaniman59337 ай бұрын
All our homes on Carveacre survived this fire. It was a true miracle!
@amosgjoni7 ай бұрын
I installed the system same exact like you and the water drain don’t stop draining water. is that normal.
@RealProjectTube7 ай бұрын
Unfortunately RO systems aren't that efficient and waste water to make water. So there will be drainage water whenever the system is making water or filling the tank.
@AshModz3697 ай бұрын
This rust bucket could send you to the next level but you dont post often enough. Quickly lost in the Algorithm. Have all the tools for success you just need to make it happen. If its money then work on things that dont cost you much. If its time then sleep less. KEEP POSTING. Not every post needs to be full of edits, narration and music. I bet if you post once a week on the buggy and piece it back together in a few months time you'll have 50k subs. So what if its not perfect, had rig some things and it breaks on the first ride. Thats entertainment.
@RealProjectTube7 ай бұрын
Maybe I just need to hire you to come be my manager, or maybe the cleaning guy. Yea I been lagging on the buggy project but I had to get the blast cabinet figured out and I still need ot figure out the damn engine. I don't really want to stick the VW back in. How you been Ash?
@bradmaas68757 ай бұрын
The new light is an LED, adequate for the job. I tried the mixing valve, not a fan. I put an elbow and a foot pedal so that I could use low pressure hose to the triggerless feed gun (from Eastwood). I also put a piece of thin aluminum with a kick-out at the bottom on the door with double sided tape, tap the door prior to opening, still some media drops.
@chrisspera31927 ай бұрын
Your light is going to have about a 40 min lifespan after you put start blasting. I've had this same cabinate since 2004.
@RealProjectTube7 ай бұрын
I'll post a follow up after 40 minutes.
@dianevo1877 ай бұрын
Best filter replacement video I've watched. Thanks for sharing!!
@ryanhook98077 ай бұрын
Thank you for the great video! Thank you for he links! Thank you for saving me hundreds of dollars by doing it myself!
@Chris-ji4iu7 ай бұрын
Purchased my system a week ago and used this video as well as the manual for installation. This video was an excellent supplement - I watched all the way through before starting and the manual is excellent - I would advise reading twice and taking your time - see where the connections are, etc. Everything is color coded so the actual install is simple. My space was very tight and it was a pita to get everything in place.
@marksmith45127 ай бұрын
I have the same system but I added the alkaline filter to mine. I have a problem where my water make my mouth feel dry or astringent after drinking the water. I tried eliminating the alkaline cartridge with no luck and I put it back on. My coffee tastes off like extra bitter and again astringent. I don't have this problem with plain tap water or bottled water. Any suggestions?
@RealProjectTube7 ай бұрын
How old are your filters? If they are new did you flush them before use? Drinking the water straight from the tap without it being filtered does not taste like that? I have the Alkaline filters but have not installed them. A lot of people have said that especially at first the alkaline filters taste bad so I opted to just add in electrolytes back in my water manually.
@marksmith45127 ай бұрын
@@RealProjectTube I bought the system back in may 2022 and haven’t changed any filters yet. Express was nice enough to send me new filters. The water tastes fine from the ro. It’s just after a while after drinking it my mouth feels astringent and dry and when I drink coffee it tastes I don’t know like I can maybe taste the coconut husks. I went through several tanks worth and I did empty I think two tanks full when I first installed it.
@RealProjectTube7 ай бұрын
@@marksmith4512 I would change the filters as the 3 pre-filters are I believe supposed to be changed every 6 months, obviously this is based on average use. I think the instructions say to fill and drain the tank 3-4 times which take if I remember right nearly all day. RO water does not taste as good as quality bottles water mainly because the lack of minerals. Most water companies add the minerals back in for taste. I haven't noticed any astringent taste to my water though nor a coconut husk taste but I also smoked for 20 years and maybe my taste buds aren't as sensitive anymore lol. The only advice I can give you is make sure your filters are changed on time and its flushed properly.
@marksmith45127 ай бұрын
@@RealProjectTube Thank you for the great advice!
@eberedwinhonoriosanchez66398 ай бұрын
POR QUE SALE MUY MAL O CON MUCHO DESPERFECTO LA PIEZA ???
Пікірлер
Good idea! Thanks! I have a broken patio table and a sheet of warped plywood in the back yard!
Thank you for this. I'll stick to aluminum casting with pla.😊
Anybody remember the 1981 movie Dragonslayer? This really looks like the magical spear from that one.
This water filtration system initially worked so well that I purchased a second one. However, when it was time to replace the filters, the system stopped working. It was a headache trying to get customer care to return my calls and figure out the problem. The system was bypassing the filtration process, resulting in no filtered water. After over a month of struggling with this issue and receiving minimal support from customer care, I finally gave up and replaced the entire system with a different brand. I was very disappointed with the lack of support from Express Water and probably won't be buying from them again, as I expect a company to back up their product when customers need assistance.
Think you didn’t run the vacuum long enough before pouring
I am trying to 3d print with wax resin currently. What trouble shooting worked out for u ? Your prints look amazing.
When all said and done it’s worth your money to just buy a purpose built burnout oven.
Agreed 👍
Excellent, but i think if you put in the right side of cabinet you have a plenty acces to gauge and UV lamp when time is come to replace it.....IMO
What was the air pressure that you used first
Thanks
Sera que da para Fazer grillz desse jeito??
Thank you. Good video. Appreciate the details about LG steam dryer. Wiring & parts seem essentially identical though obviously a different model. Hope you do more videos on electro mechanical fixes & upgrades, like installing water purification, upgrading sockets to include usb, led light fixture, upgrades, etc. or whatever your trained or exoerience or professional skill set is. We did miss how you installed back rollers, etc., but will find out today. We LUCKED OUT that lint accumulation near ELECTRIC HEATER DID NOT START FIRE, as lint accumulation was so great that it wrapped around & felted around one roller so severely that it broke. (Definitely loose & broke tetaining clip.) All 3 other rollers were ok but were also wrapped with only a litlle lint & clips intact. We clean lint trap after each use & vents annually & outside vent with animal guard monthy. (Should make vacumn nozzle that can reach down to bottom of dryer trap lint catchment as can see lint down there.) Dryer is about 14 years old. First time that we've opened it. Shocked by how much lint accumulated. HOW DOES SO MUCH LINT GET INSIDE DRYER. WHERE IS THE LINT LEAK???? Front panel, blower, etc. Heard it could be the drum that leaks lint, especially if vent clogged. LG Dryers need to be easier to open to inspect & clean lint & be part of periodic maintenance schedule. Disassembled & cleaned everything thus far but the motor which was just vacumned. (Did remove hair wrapped around motor spindle to blower.) Great dryer! Hope it is good for another 15 years with periodic internal inspections for lint!
So we finally discover where all the 10mm stuff goes.
21 ppb is not good. Drinking water should be less than 5 to 0 ppb from a filtration system. Either this system is not working or ready to drink.
Total dissolved solids (TDS) A good TDS level for RO water is 10-50 ppm, but RO typically reduces TDS to under 25 ppm
where the front and back rollers the same?
Yes they were the same.
Is it made in US
... To be continued...
Good job man. Protect your family.
I wish my city water was that good I'm sitting in 390-450 tds it's crazy
Do you have a video on how to change the rom alk pac n uv light
I don't, I actually just changed most of those last weekend. It was pretty straight forward, just the reverse of the install.
Did the installation affect the water pressure to you sink?
I didn't notice any difference.
Hello, saw ur previous video now this and did installed model that comes with UV+ALK and was wondering if ION filter is it really required even if you have UV or ALK? Thanks.
The filter housing should be vacuum cleaned every year to help with the build up of lint.
i need specially designed metal tools made at work and there's no way they would go for a 150k+ metal printer when its not used for production. its only to support the assemblers. i was hoping you would review the 17-4 filament as the bronze & copper is practically useless for absolutely everything. also they sell inline filament heaters now that's suppose to help with the breakage.
Too much talk and too much still picture IMO. I was hoping to see a lot of cast results too.
yea you should probably just stick to shorts then as you have the attention span of a 3yo....I say good day sir!
@@RealProjectTube You don't seem to take raw criticism very well. Next time be sure to show the cardboard box of the products for 2 minutes at least. Maybe it gets more interesting then 😂😂
@@xDevoneyx Clearly you know how to make content better then me with your 44 subscribers and 11 videos...
Hi. I'm the Founder/ceo of The Virtual Foundry. Your first review was helpful for us. Your followup was also helpful. It's been quite a few years since your last review. I've put years worth of effort into make this process easier. Our newest instructions for sintering bronze and copper have a 95%+ success rate. Also, the filament is MUCH easier to work with (it's not brittle). Anyway, if your up for reviewing the newest version, please reach out. I'll set you up with an evaluation kit free of charge. No strings attached, of course. I'd expect you to present your honest opinion. The process has become so refined and simple that I'm confident you will wind up with a really nice metal 3d print. Please reach out if you're interested.
I appreciate it Sir.
Do yall think it taste like coconut
So the filter only works for the faucet given and not on the main house faucet?
Correct, its just for drinking water. Although I hooked mine up to my refrigerator ice maker as well.
The drain saddle package doesnt fit the pipe any thoughts????
All you really need to do is figure out a way to keep the tube from coming out of the pipe. Maybe some hot glue or a zip tie?
Best do that extra gently. I would use walnut shell instead of sand. Next burn it in the oven or a wood fire.
I normaly build a good wood fire then throw it in the coals after the logs burn down to coals.
Nice and straightforward explanation, thank you
The original piece was hollow all trough until the tip, to save weight. Isn't 12% tin a bit much ? what about a 9/10% tin ? It would be much tougher
Thank you so much for the great video! It helped me a lot!
If you guys see how I used to do it back in Cuba which is a communist country, Im talking about third world shit, I used to put the flask, which was just a copper pipe cut, on top of just and electric furnace with an aluminum pot on top, for 5 hours straight, and then cast in a centrifugal casting 😂
Any recomendations on where to look to get my points on the bed? Ive looked and looked but everything i find is older and it doesnt match with the newer software....
The points should be defined somewhere in the source code...I have no idea where though.
You should add more meta data. Regular/hash tags. Make shorts and link the original video. Just give TY what they want! So they can best recommend your videos. Check out the "remix" button on your videos page from your phone. Top right corner you can change from 5/60sec. You can also upload from your phone and covert/edit into a short. Tags are so important I believe. More important than a nice description which is just word vomit. Tags narrow down what words matter. Also have the same words you tag also in your description.
Water sucks. Gatorades better.
Gatorade has electrolytes. It's what plants crave. 🤤
Full of cancer causing sugar!
Idk what this is but I want one. Looks cool, like part of a time machine. ⏲️
All our homes on Carveacre survived this fire. It was a true miracle!
I installed the system same exact like you and the water drain don’t stop draining water. is that normal.
Unfortunately RO systems aren't that efficient and waste water to make water. So there will be drainage water whenever the system is making water or filling the tank.
This rust bucket could send you to the next level but you dont post often enough. Quickly lost in the Algorithm. Have all the tools for success you just need to make it happen. If its money then work on things that dont cost you much. If its time then sleep less. KEEP POSTING. Not every post needs to be full of edits, narration and music. I bet if you post once a week on the buggy and piece it back together in a few months time you'll have 50k subs. So what if its not perfect, had rig some things and it breaks on the first ride. Thats entertainment.
Maybe I just need to hire you to come be my manager, or maybe the cleaning guy. Yea I been lagging on the buggy project but I had to get the blast cabinet figured out and I still need ot figure out the damn engine. I don't really want to stick the VW back in. How you been Ash?
The new light is an LED, adequate for the job. I tried the mixing valve, not a fan. I put an elbow and a foot pedal so that I could use low pressure hose to the triggerless feed gun (from Eastwood). I also put a piece of thin aluminum with a kick-out at the bottom on the door with double sided tape, tap the door prior to opening, still some media drops.
Your light is going to have about a 40 min lifespan after you put start blasting. I've had this same cabinate since 2004.
I'll post a follow up after 40 minutes.
Best filter replacement video I've watched. Thanks for sharing!!
Thank you for the great video! Thank you for he links! Thank you for saving me hundreds of dollars by doing it myself!
Purchased my system a week ago and used this video as well as the manual for installation. This video was an excellent supplement - I watched all the way through before starting and the manual is excellent - I would advise reading twice and taking your time - see where the connections are, etc. Everything is color coded so the actual install is simple. My space was very tight and it was a pita to get everything in place.
I have the same system but I added the alkaline filter to mine. I have a problem where my water make my mouth feel dry or astringent after drinking the water. I tried eliminating the alkaline cartridge with no luck and I put it back on. My coffee tastes off like extra bitter and again astringent. I don't have this problem with plain tap water or bottled water. Any suggestions?
How old are your filters? If they are new did you flush them before use? Drinking the water straight from the tap without it being filtered does not taste like that? I have the Alkaline filters but have not installed them. A lot of people have said that especially at first the alkaline filters taste bad so I opted to just add in electrolytes back in my water manually.
@@RealProjectTube I bought the system back in may 2022 and haven’t changed any filters yet. Express was nice enough to send me new filters. The water tastes fine from the ro. It’s just after a while after drinking it my mouth feels astringent and dry and when I drink coffee it tastes I don’t know like I can maybe taste the coconut husks. I went through several tanks worth and I did empty I think two tanks full when I first installed it.
@@marksmith4512 I would change the filters as the 3 pre-filters are I believe supposed to be changed every 6 months, obviously this is based on average use. I think the instructions say to fill and drain the tank 3-4 times which take if I remember right nearly all day. RO water does not taste as good as quality bottles water mainly because the lack of minerals. Most water companies add the minerals back in for taste. I haven't noticed any astringent taste to my water though nor a coconut husk taste but I also smoked for 20 years and maybe my taste buds aren't as sensitive anymore lol. The only advice I can give you is make sure your filters are changed on time and its flushed properly.
@@RealProjectTube Thank you for the great advice!
POR QUE SALE MUY MAL O CON MUCHO DESPERFECTO LA PIEZA ???