Man its Soo cool there are so many 05-09 mustang gt custom creators! It would be so cool for all of us to get together and fix our cars together and mod out!
@johnmurray9509 күн бұрын
American muscle has some of the worst customer service I have ever experienced! Terrible!
@dumisanijack9 күн бұрын
Are this jeep original lights? How powerful r they at night, do you see everything clear? And how long do they last and how do you replace em?
@zackshaffer390411 күн бұрын
The safari link doesn’t work anymore🥺
@rosaliocamacho406811 күн бұрын
Question how did you get that block
@musztarda199018 күн бұрын
@Kaiden Odom - Do these lamps have European turn signal lights?
@kaidanodom16 күн бұрын
No, they look a little strange on camera but the turn signal/brake light is red like the running lights, just brighter
@musztarda199016 күн бұрын
@@kaidanodom also from aliexpress i took LED Tail Lights for Ford Mustang 2005-2009 5th Gen S-197 Sequential Rear Lamps 436$ and they have a Orange turn signal 👌 its hard to get something from Europa, but I stay strong 😅 Thanks for anwser Man 👌 When i will finish my s197 from florida than material will go on @Hunter Mechanik channel . I give You a sigh 💪🙋 Cheers
@happycampersminnesota7526Ай бұрын
I’ve been getting grief for confusing the flywheel and clutch. Been over fifty years since I repaired a clutch!
@simonmoriarty9987Ай бұрын
American Muscle sound like a bunch of sheart
@alenmartinez6758Ай бұрын
Where did you buy your head lights??? Because the one's I have dont fit on the bumber
@HellionB.R.MАй бұрын
That's not a garage at all.
@patwhiting75792 ай бұрын
Yo, I have these lights and I am wondering where the daytime halo light gets connected too? Do you have to have a daytime run light module? Because this can does not have daytimes stock. Thanks
@kaidanodom2 ай бұрын
On a car like this you have to get creative. I don’t remember exactly how we connected it but it kinda depends on how you want the lights to function. If you want them on all the time you’ll wire them into an ignition power source. If not they’ll need to be on some other switch
@patwhiting75792 ай бұрын
I got er , there was an unused connector for the side maker lights so now they work on the middle position of the light switch, also added underglow!
@JoseEnriqueAcosta-no9yg2 ай бұрын
nice progress dude, keep on it
@soundwave_vr62 ай бұрын
The wires you soldered was the airbag, you dont actually have to swap that, it stays with the seat. you can seperate it from the other part of the harness. just fyi for anyone doing this swap.
@Mr.ImbeciIe5 күн бұрын
So I don't need to splice/ solder anything?
@imCylo2 ай бұрын
Big progress! Also early congrats on graduating!
@kaidanodom2 ай бұрын
Thank you!
@hotcoffeeamericano2 ай бұрын
red alltrack is hotness
@jamesbowles18632 ай бұрын
Looking pretty damn good my guy!! She’s gunna be sweet. Wish you were in Michigan 😭 I need Mazda buddies here!
@kaidanodom2 ай бұрын
Thank you! I feel that way about my mustang. I’m fortunate to have mazda people around up here in the PNW because there’s hardly any other mustang bros haha
@WaltKowalski-qh2gi3 күн бұрын
Yeah I'm in Vancouver currently rebuilding my entire ES. Using your videos lol I made the mistake of ripping everything apart and not marking anything
@Citric-SizzIe2 ай бұрын
Bro I have these I’ve been trying to get them to work on my v6 non pony package not sure if you need a factory fog light harness but mines won’t work but the instructions said to splice yellow wire into white headlight wire why did u do it differently? I need help
@kaidanodom2 ай бұрын
Hey bro, DM me on Instagram, I’ll try to help if I can!
@Citric-SizzIe2 ай бұрын
I got it all working now thanks bro this video helped so much the original video from American muscle on these was wrong saying the yellow is power🤦♂️I also had to by an aftermarket fog light harness with a button and all that so I connected that to the battery and to the fogs switched the yellow around with the red like you said and boom
@user-kv9qm8bi6c2 ай бұрын
But I need parts
@user-kv9qm8bi6c2 ай бұрын
I leaned so much for you I'm from the Caribbean and because of you I work 3 jobs jus to buy my first car and it a protege5
@kaidanodom2 ай бұрын
Wow that’s impressive!! Thank you for the support, best of luck with your build!
@traviskuhlman79342 ай бұрын
Are you from roseburg area? I swear you look familiar
@kaidanodom2 ай бұрын
No I’m from Portland area. Going to school in Corvallis right now but I’ve never been down to roseburg 🤷♂️
@vikaghostwave3 ай бұрын
Did the spyder tail lights stay with u? Were they good quality? I was going to buy some the vectors are out of my budget? 😎
@kaidanodom3 ай бұрын
I got vectors a long time ago. Spyders are not reliable unfortunately /:
@vikaghostwave3 ай бұрын
@@kaidanodom OK good to know
@vikaghostwave3 ай бұрын
@@kaidanodom thanks for the quick response
@vikaghostwave3 ай бұрын
How is the quality? Are they still holding up?
@vikaghostwave3 ай бұрын
Are they still holding up?
@anthonyhospedales34243 ай бұрын
You talk to f**king mych
@luvillalta55003 ай бұрын
Love the bumper. What site did u get it at? I’ve some of these come damaged or not made to fit properly, so I’m tryna find a legit site. Thx
@kaidanodom3 ай бұрын
I bought my bumper from extremedimensions.com The quality control on their bumper production is not great. This bumper will require some form of body work in order to fit properly
@wage34213 ай бұрын
For anybody still watching this if you lower your car with a solid rear axle, you have to get an adjustable pan hard bar. your axles gonna shift
@kaidanodom3 ай бұрын
While you are correct, It’s not the end of the world with these springs. They don’t lower the car much and the shift is negligible. The solid axle will shift more from being parked on a slanted road than it will from installing these springs.
@wage34213 ай бұрын
@@kaidanodom it’s going to shift, but it’ll go right back in place. It’s not gonna stay permanently shift. There’s a massive metal bar keeping it in place but when you bring the axle closer to the body, it will shift.
@Slo.3valve3 ай бұрын
Is the bumper compatible with the stock turn signals?
@kaidanodom3 ай бұрын
No, you’ll need to do something custom
@Slo.3valve3 ай бұрын
@kaidanodom ah I see, thank you
@tchouker18003 ай бұрын
So all i would need for the install is just lowering springs since my struts and shocks are still good? And is an adjustable panhard bar necessary?
@kaidanodom3 ай бұрын
For this set up I would recommend an adjustable panhard bar. I don’t have one but it’s advisable.
@tchouker18003 ай бұрын
@@kaidanodom i’ll definitely get some in the future but for a few months do u think it’s fine without them? And are you still on the stock struts and shocks?
@kaidanodom3 ай бұрын
@@tchouker1800 Yea my suspension is all stock except for the lowering springs. I know some springs will drop the car much lower and for those I probably wouldn't recommend it but the SR springs are only a 1.5 inch drop which isn't too big of a deal. Especially for just a few months
@newkirksgarage3 ай бұрын
Super cool to watch brother! Wishing you good luck and no more hang ups 😄
@dannybassich62103 ай бұрын
Just imagine how happy you'll be when It fires up in the car again. You've got this!
@imCylo3 ай бұрын
Can't wait to see what you have in store for next weekend!
@ScarPiece3 ай бұрын
Dream big! It will always resonate as part of your outro 😊
@kaidanodom3 ай бұрын
I’ll bring it back
@christianreid18823 ай бұрын
I'm still on the fence about getting these, I don't really like the amber turn signals. Is it really noticeable?
@kaidanodom3 ай бұрын
There’s no amber on them…?
@christianreid18823 ай бұрын
@@kaidanodom When you use your turn signal / hazards, they turn slightly orangish yellow. Or is that just on the camera? Take a look at exactly 6:36 or 7:17. (I understand there you're not using your turn signals, it just looks amber.)
@kaidanodom3 ай бұрын
@@christianreid1882 I think it's just the camera. They're red as can be in person
@newkirksgarage3 ай бұрын
I lost it at the duct tape removal 😂😄
@kaidanodom3 ай бұрын
Hahaha gotta do what you gotta do sometimes lmao
@paddoqclub3 ай бұрын
Blocked
@pgmoca703 ай бұрын
Love your videos my Mazdaspeed protege is down right now ,my third gear is gone and no money to repair or find a Cheap transmission ,always good to see videos to learn,thanks for share your build
@kaidanodom3 ай бұрын
Thank you! and good luck with your build! I'm sure a transmission will pop up for sale in the facebook groups at some point
@pgmoca703 ай бұрын
Nice machine
@kaidanodom3 ай бұрын
She will be soon!
@jench783 ай бұрын
1:34 to skip the bullshit at the beginning that is off topic
@creativesoul96_333 ай бұрын
So you don’t need a tune for this mod?
@kaidanodom3 ай бұрын
Nope! it’s after the downstream O2 sensor so there’s nothing about it that’s being monitored by the ECU
@jamesbowles18633 ай бұрын
Easiest engine/trans to pull after the first or second time lol. Was definitely hype for this video! Not too many p5 videos on KZread especially recent ones.
@kaidanodom3 ай бұрын
Yea it wasn’t too bad!! I’m super excited to get the new engine in, she’s gonna rip 😎
@dannybassich62103 ай бұрын
Very fun way to spend a weekend
@kidd2444 ай бұрын
Soo.... No wire splicing?
@mywa83144 ай бұрын
Ad an H-Pipe, and it will sound beautiful 👍
@bradleyloria45414 ай бұрын
what front bumper do you have?
@ImZephxr4 ай бұрын
So the tab that u slide in, had broken on my mustang. any ideas of how to keep the turn signal in place or ways to get a new tab?
@cheekibreeki95214 ай бұрын
Is this the F series mazda engine or the Z series?
@kaidanodom4 ай бұрын
It’s an FS engine. While it does use the “F” naming convention, it’s typically not included in the original F series engines group because it’s very different from the old school Mazda engines
@jamesbowles18634 ай бұрын
I fell ya on all the stuff happening at the wrong time for sure. I got my fs apart after pulling it from my p5 after tossing a rod thru a cylinder wall. And it took me just over 2 months to get it all back together. I had parts scattered ALL over my garage. To the point my wife and father in law thought it would never run. Now she sits with a new engine and auto trans with plans to do some sketchy stuff with a tiptronic auto 😅
@kaidanodom4 ай бұрын
I love it when you get to prove them wrong 😎
@ScarPiece4 ай бұрын
Sorry to hear, I went through a very similar situation. Except, I let it derail me. Glad you are holding strong & dream big! Can't wait for more content 8-)
@imCylo4 ай бұрын
I'm sorry to hear about all of the stuff you've had to deal with (kinda in a similar boat lol) but glad that you're in the home stretch. Can't wait for the upcoming videos!
Пікірлер
Love it doing my now
Man its Soo cool there are so many 05-09 mustang gt custom creators! It would be so cool for all of us to get together and fix our cars together and mod out!
American muscle has some of the worst customer service I have ever experienced! Terrible!
Are this jeep original lights? How powerful r they at night, do you see everything clear? And how long do they last and how do you replace em?
The safari link doesn’t work anymore🥺
Question how did you get that block
@Kaiden Odom - Do these lamps have European turn signal lights?
No, they look a little strange on camera but the turn signal/brake light is red like the running lights, just brighter
@@kaidanodom also from aliexpress i took LED Tail Lights for Ford Mustang 2005-2009 5th Gen S-197 Sequential Rear Lamps 436$ and they have a Orange turn signal 👌 its hard to get something from Europa, but I stay strong 😅 Thanks for anwser Man 👌 When i will finish my s197 from florida than material will go on @Hunter Mechanik channel . I give You a sigh 💪🙋 Cheers
I’ve been getting grief for confusing the flywheel and clutch. Been over fifty years since I repaired a clutch!
American Muscle sound like a bunch of sheart
Where did you buy your head lights??? Because the one's I have dont fit on the bumber
That's not a garage at all.
Yo, I have these lights and I am wondering where the daytime halo light gets connected too? Do you have to have a daytime run light module? Because this can does not have daytimes stock. Thanks
On a car like this you have to get creative. I don’t remember exactly how we connected it but it kinda depends on how you want the lights to function. If you want them on all the time you’ll wire them into an ignition power source. If not they’ll need to be on some other switch
I got er , there was an unused connector for the side maker lights so now they work on the middle position of the light switch, also added underglow!
nice progress dude, keep on it
The wires you soldered was the airbag, you dont actually have to swap that, it stays with the seat. you can seperate it from the other part of the harness. just fyi for anyone doing this swap.
So I don't need to splice/ solder anything?
Big progress! Also early congrats on graduating!
Thank you!
red alltrack is hotness
Looking pretty damn good my guy!! She’s gunna be sweet. Wish you were in Michigan 😭 I need Mazda buddies here!
Thank you! I feel that way about my mustang. I’m fortunate to have mazda people around up here in the PNW because there’s hardly any other mustang bros haha
Yeah I'm in Vancouver currently rebuilding my entire ES. Using your videos lol I made the mistake of ripping everything apart and not marking anything
Bro I have these I’ve been trying to get them to work on my v6 non pony package not sure if you need a factory fog light harness but mines won’t work but the instructions said to splice yellow wire into white headlight wire why did u do it differently? I need help
Hey bro, DM me on Instagram, I’ll try to help if I can!
I got it all working now thanks bro this video helped so much the original video from American muscle on these was wrong saying the yellow is power🤦♂️I also had to by an aftermarket fog light harness with a button and all that so I connected that to the battery and to the fogs switched the yellow around with the red like you said and boom
But I need parts
I leaned so much for you I'm from the Caribbean and because of you I work 3 jobs jus to buy my first car and it a protege5
Wow that’s impressive!! Thank you for the support, best of luck with your build!
Are you from roseburg area? I swear you look familiar
No I’m from Portland area. Going to school in Corvallis right now but I’ve never been down to roseburg 🤷♂️
Did the spyder tail lights stay with u? Were they good quality? I was going to buy some the vectors are out of my budget? 😎
I got vectors a long time ago. Spyders are not reliable unfortunately /:
@@kaidanodom OK good to know
@@kaidanodom thanks for the quick response
How is the quality? Are they still holding up?
Are they still holding up?
You talk to f**king mych
Love the bumper. What site did u get it at? I’ve some of these come damaged or not made to fit properly, so I’m tryna find a legit site. Thx
I bought my bumper from extremedimensions.com The quality control on their bumper production is not great. This bumper will require some form of body work in order to fit properly
For anybody still watching this if you lower your car with a solid rear axle, you have to get an adjustable pan hard bar. your axles gonna shift
While you are correct, It’s not the end of the world with these springs. They don’t lower the car much and the shift is negligible. The solid axle will shift more from being parked on a slanted road than it will from installing these springs.
@@kaidanodom it’s going to shift, but it’ll go right back in place. It’s not gonna stay permanently shift. There’s a massive metal bar keeping it in place but when you bring the axle closer to the body, it will shift.
Is the bumper compatible with the stock turn signals?
No, you’ll need to do something custom
@kaidanodom ah I see, thank you
So all i would need for the install is just lowering springs since my struts and shocks are still good? And is an adjustable panhard bar necessary?
For this set up I would recommend an adjustable panhard bar. I don’t have one but it’s advisable.
@@kaidanodom i’ll definitely get some in the future but for a few months do u think it’s fine without them? And are you still on the stock struts and shocks?
@@tchouker1800 Yea my suspension is all stock except for the lowering springs. I know some springs will drop the car much lower and for those I probably wouldn't recommend it but the SR springs are only a 1.5 inch drop which isn't too big of a deal. Especially for just a few months
Super cool to watch brother! Wishing you good luck and no more hang ups 😄
Just imagine how happy you'll be when It fires up in the car again. You've got this!
Can't wait to see what you have in store for next weekend!
Dream big! It will always resonate as part of your outro 😊
I’ll bring it back
I'm still on the fence about getting these, I don't really like the amber turn signals. Is it really noticeable?
There’s no amber on them…?
@@kaidanodom When you use your turn signal / hazards, they turn slightly orangish yellow. Or is that just on the camera? Take a look at exactly 6:36 or 7:17. (I understand there you're not using your turn signals, it just looks amber.)
@@christianreid1882 I think it's just the camera. They're red as can be in person
I lost it at the duct tape removal 😂😄
Hahaha gotta do what you gotta do sometimes lmao
Blocked
Love your videos my Mazdaspeed protege is down right now ,my third gear is gone and no money to repair or find a Cheap transmission ,always good to see videos to learn,thanks for share your build
Thank you! and good luck with your build! I'm sure a transmission will pop up for sale in the facebook groups at some point
Nice machine
She will be soon!
1:34 to skip the bullshit at the beginning that is off topic
So you don’t need a tune for this mod?
Nope! it’s after the downstream O2 sensor so there’s nothing about it that’s being monitored by the ECU
Easiest engine/trans to pull after the first or second time lol. Was definitely hype for this video! Not too many p5 videos on KZread especially recent ones.
Yea it wasn’t too bad!! I’m super excited to get the new engine in, she’s gonna rip 😎
Very fun way to spend a weekend
Soo.... No wire splicing?
Ad an H-Pipe, and it will sound beautiful 👍
what front bumper do you have?
So the tab that u slide in, had broken on my mustang. any ideas of how to keep the turn signal in place or ways to get a new tab?
Is this the F series mazda engine or the Z series?
It’s an FS engine. While it does use the “F” naming convention, it’s typically not included in the original F series engines group because it’s very different from the old school Mazda engines
I fell ya on all the stuff happening at the wrong time for sure. I got my fs apart after pulling it from my p5 after tossing a rod thru a cylinder wall. And it took me just over 2 months to get it all back together. I had parts scattered ALL over my garage. To the point my wife and father in law thought it would never run. Now she sits with a new engine and auto trans with plans to do some sketchy stuff with a tiptronic auto 😅
I love it when you get to prove them wrong 😎
Sorry to hear, I went through a very similar situation. Except, I let it derail me. Glad you are holding strong & dream big! Can't wait for more content 8-)
I'm sorry to hear about all of the stuff you've had to deal with (kinda in a similar boat lol) but glad that you're in the home stretch. Can't wait for the upcoming videos!