Пікірлер

• 
  @0282AngeloКүн бұрын

  hi where can i find the support that is installed on the engine tube please tell me where can i find it thanks

• 
  @ozoutdorz258422 сағат бұрын

  kzread.info/dash/bejne/lJiDo9uBidO_pMo.html

• 
  @BeanieBoyMoto4 күн бұрын

  Can't wait mate 👍

• 
  @BeanieBoyMoto4 күн бұрын

  Can't wait mate 👍

• 
  @BeanieBoyMoto4 күн бұрын

  Can't wait mate 👍

• 
  @colinmack3896 күн бұрын

  Hi, great video thanks. I just have a couple of questions. Was there a particular reason you cut down the cage, what type of board did you mount the slide on and have you removed the rear seats (6 & 7). Cheers Colin

• 
  @ozoutdorz25846 күн бұрын

  Hi Colin, the third row is still there just folded flat. I used a sheet of 12mm plywood from Bunnings..I cut the cage down as I was not putting anything on top of the fridge. The second row seat would need to be tilted up to 90 degrees or cut the cage end on an angle to suit the slope of the seat.. The half cage is enough for us to keep gear away from the fridge. Also, more cage would be more weight to lift in and out.. This set up is for simplicity and ease to quickly return to standard. Thanks for watching.

• 
  @colinmack3896 күн бұрын

  @@ozoutdorz2584 Thanks for your reply.

• 
  @ozoutdorz258410 күн бұрын

  I'm sure it would be easy enough and I would have done that except I only wanted a temporary set up. Great idea though..maybe layer. Cheers

• 
  @barryandersen132910 күн бұрын

  Excellent video. Thank you. I just finished replicating your design. Are you aware of anyone who has home made a drawer to set to the right of the fridge slide?

• 
  @markkent689113 күн бұрын

  Nice one

• 
  @ozoutdorz258413 күн бұрын

  We're trying. We just got the prototype back from repairs, so should be soon. Cheers

• 
  @BeanieBoyMoto14 күн бұрын

  Great Tips mate ... Hope you get round to doing a comparison review on the Gen1 & Gen2 B52 soon 👍

• 
  @MrEventlive13 күн бұрын

  Another tip is to dial down the power via the menu

• 
  @BeanieBoyMoto13 күн бұрын

  @@MrEventlive 👍👍👍

• 
  @wronksTV17 күн бұрын

  Damn that’s a 24 inch wheel looks more like a 19

• 
  @BeanieBoyMoto19 күн бұрын

  Another great vlog mate ... Lookin forward to more 👍

• 
  @ricusmate19 күн бұрын

  All the stealth bikes have too steep of a head angle. It makes them look dated. Please make the head angles 65 degrees.

• 
  @mairaalejandragrisales755620 күн бұрын

  hello....is the trailer foldable?? i am talking about one is closed

• 
  @ozoutdorz258420 күн бұрын

  @mairaalejandragrisales7556 yes, the red closed in one is collapsible.

• 
  @trent344322 күн бұрын

  Thanks for the video. If my MU-X already has an Anderson Plug wired and installed in the boot by a previous owner. Would I still need a dc-dc charger? Or could I just plug the battery directly into the Anderson plug instead?

• 
  @ozoutdorz258422 күн бұрын

  do you mean for the purpose of charging the second battery ???.. It would be good to know where the power source is for the Anderson Plug you have, but assuming it's a direct feed from your existing car battery, it won't charge the second battery as effectively as a charging device.

• 
  @trent344322 күн бұрын

  ​it leads to the starter battery. A grey 50 amp plug. Good to know, it would be good to utilise it. Did you get you dc-dc charger from 12 Volt Direct as well?

• 
  @thenewgamers7382Ай бұрын

  How do you get this? There a website?

• 
  @ozoutdorz2584Ай бұрын

  Google "stealth electric bikes "

• 
  @BeanieBoyMotoАй бұрын

  Another Great Vlog mate ... Keep em comin! 👍

• 
  @John.0zАй бұрын

  It is nice that the new keys have a rubber rain guard; but that does not help the switch when you have to chain up the bike outside in the rain. I have to see what I can do about making a rubber switch cover that sits in place of the key.

• 
  @ozoutdorz2584Ай бұрын

  John, it's only a thin plastic cap on a thin key. Not as as nice as the original with Stealth engraved in it.

• 
  @John.0zАй бұрын

  @@ozoutdorz2584 I am sure it will work well enough, although I have managed to get caught in light rain a few times, and so come to quite like my rubber covered Stealth key. 😁 I going to have to start looking for that cover I mentioned...

• 
  @mikehzz9848Ай бұрын

  Were there any caramello koalas in the trees?

• 
  @ozoutdorz2584Ай бұрын

  We'll look for them next time out in the bush

• 
  @matthewgonzalez5019Ай бұрын

  Will a trolling motor fit in the revo 11 I’m trying to put one on my 2016 revo 11 specifically the watersnake 24 pound thrust

• 
  @ozoutdorz2584Ай бұрын

  Yes it will

• 
  @roloroloka5983Ай бұрын

  Great video. Bought MUX Xmas 23. White same as yours. Think I will do the same. Looks easy to take out when you are done. Good DYI project

• 
  @MrBrettAIRАй бұрын

  Nothing stealthy about these bikes sadly. Escapade E-Bikes is the only real company that sells stealthy and fast E-Bikes. Plus they actually have customer service 😂

• 
  @BeanieBoyMotoАй бұрын

  Love your videos Mark ... Lookin forward to your video on which bike is better the Gen1 or Gen2 ? Cheers mate 👍 Beanie

• 
  @John.0zАй бұрын

  What a fantastic extension. Better than around here. I am going to have to have a go at it. Those swamp frogs look dangerous! 🤣

• 
  @DannyAgnewАй бұрын

  Hi do u get the clip I fitting with it

• 
  @ozoutdorz2584Ай бұрын

  I made it myself, see my other Hobie videos which will show you how.

• 
  @BeanieBoyMoto2 ай бұрын

  Another Great Vlog fellas ... What's your opinion of the Gen 2 B52 ? Is it as good as the Gen 1 ... Or is the Gen 1 better ?

• 
  @ozoutdorz25842 ай бұрын

  We'll do an episode on it

• 
  @BeanieBoyMoto2 ай бұрын

  @@ozoutdorz2584 Can't Wait mate 👍

• 
  @John.0z2 ай бұрын

  I am feeling like It might be a good idea to pull the screws that hold my brake rotors in place, and loctite them? BTW, one advantage of the P-7/r is the very neat single quick disconnect sitting alongside the swing arm. Easy to work with. 😁 The greater power transmission demand of the B-52 would probably make that hard to implement.

• 
  @hhazelhoff13632 ай бұрын

  I’m a bit confused, what is the purpose of upgrading the stock motor. Were you not satisfied with the original motor. Are you trying to get more speed / range / torck, seems to me that the stock motor is a beast and is more than adequate for the type of trail riding you use it for. And you’re adding additional weight. Not sure what the end game is. Thx

• 
  @ozoutdorz25842 ай бұрын

  You will see in the earlier episodes that the Gen 2 bikes overheat due to the larger diameter wheel which increases the gear ratio and reduces torque and acceleration.

• 
  @petesmith12 ай бұрын

  @@ozoutdorz2584 We want to be able to ride up vertical walls with the new motor 🙂

• 
  @MrEventlive2 ай бұрын

  Just as soft sand baffles a lot of motor cyclists, soft sand will provide plenty of challenge to Stealth riders. However i can tell you riding soft sand is possible on the Stealth. It requires speed and shifting weight rearwood and nerve. I have ridden many soft sandy beaches in VIC and NSW.

• 
  @BeanieBoyMoto2 ай бұрын

  I forgot to ask what is the brand of your wide comfy seat ... Do you have a link where you bought it from?

• 
  @ozoutdorz25842 ай бұрын

  www.amazon.com.au/Simpeak-Comfortable-Waterproof-Designed-Breathable/dp/B08DHXV6YX/ref=sr_1_6?crid=339VOG6ZJTTIM&dib=eyJ2IjoiMSJ9.a30Dmkoc3hyqltSYKqLWst3n4TTOSpHKlEosIYRH3FoPHsBNMNlaa7Zy4fX7R8YqXPTegvgUyuuQHaF06Jn2bRYMg8nZ33rgnWYywDNEV475Ck0h6dDUyzU5f3fAifyyNMLbZtJEg4R9xr4SR3ZpOv2M3I9-bsxzNEch42iRxZgqtdXnOMBSJ9MtCuohjvYIPei5_wajpKjIeCYFeTDTC6jfF7id88dFha_samRMgpvD0bnPaYFO_mf4NRSfUbiLaACQkdOepcb-ufycaTOrLe71FY4fpdNnrQ1OkytD8GY.kqkBym2epkkpj80RsOH-HZ2LVZq5lPfDBtvuxq6v8kc&dib_tag=se&keywords=bike%2Bseat&qid=1714896517&sprefix=bike%2Bseat%2Caps%2C279&sr=8-6&th=1&psc=1

• 
  @BeanieBoyMoto2 ай бұрын

  @@ozoutdorz2584 Thanks mate 👍

• 
  @BeanieBoyMoto2 ай бұрын

  You blokes are livin The Dream!! 👍👍👍 Beanie

• 
  @BeanieBoyMoto3 ай бұрын

  Hi mate, where did you buy the upgraded seat from ... I see you threw the original seat away

• 
  @John.0z3 ай бұрын

  That ride was fabulous. The flat tyre and motor connection, no so much.

• 
  @BeanieBoyMoto3 ай бұрын

  Love your videos mate ... Can't wait for Part 3 👍

• 
  @ozoutdorz25843 ай бұрын

  In a crate shipped down to NSW

• 
  @BeanieBoyMoto3 ай бұрын

  Hey Brother, I live in Brisbane & I'm thinking of buying a new Stealth B-52 ... Is there a dealer here or did you buy yours from Stealth in Victoria & have it delivered? Beanie

• 
  @ozoutdorz25843 ай бұрын

  I bought my bike from Towoomba Bikes & Bits.

• 
  @BeanieBoyMoto3 ай бұрын

  @@ozoutdorz2584 Was it already assembled or still in the crate?

• 
  @BeanieBoyMoto3 ай бұрын

  @@ozoutdorz2584 Thanks Brother 👍

• 
  @ozcampnhuntdan78583 ай бұрын

  Hi all, before you ask another question - the answer is watch part 2.

• 
  @ozoutdorz25843 ай бұрын

  Part 2 next weekend

• 
  @BeanieBoyMoto3 ай бұрын

  I just subscribed ... Can't wait for the next episode 👊 Beanie

• 
  @Rushdie013 ай бұрын

  Do lowering links make it ride stiffer as it’s deeper in its stroke?

• 
  @ozoutdorz25843 ай бұрын

  Not really any difference. The suspension work made it ride very well.

• 
  @ozoutdorz25843 ай бұрын

  Yes you can

• 
  @DannyAgnewАй бұрын

  Thanks so it comes with the engine or do I need buy separately..

• 
  @alexandremelo28313 ай бұрын

  Consigo colocar num compass?

• 
  @Sportkids.3 ай бұрын

  This video is brilliant. You really add a hilarious factor with the out of breath from trying to keep up & you’re the dad! You should’ve kept that 2nd gen for yourself! Cheers lads. 👏

• 
  @Sportkids.3 ай бұрын

  Great review. The measuring tape reveals a lot. You can really understand the evolution of the bike. It looks better & bigger but it’s cleverly been lowered & sweetened. I want one!

• 
  @louietramposch45593 ай бұрын

  The qs273 is less prone to overheating which seems to plague the qs 205. 🤟👽🚲🎬

• 
  @johnwelsh70363 ай бұрын

  Why is it not as "comfortable " as a B52?

• 
  @ozoutdorz25843 ай бұрын

  the B52 has better suspension and the heavier weight of the B52 makes it resist small bumps, so therfore more plush than the P7R.. However, at a cost, you can always upgrade the P7R suspension.

• 
  @johnwelsh70363 ай бұрын

  @@ozoutdorz2584 Thanks..

• 
  @ozoutdorz25843 ай бұрын

  Yes, it's a Topeak brand. Probably find via Google.. choose the high mount.

• 
  @ozoutdorz25843 ай бұрын

  www.pushys.com.au/topeak-mtx-quick-release-beamrack-a-type.html?gad_source=1&gclid=Cj0KCQjwq86wBhDiARIsAJhuphn3DOgba_MaKIORwU6iBoMOE-2T5Zw1Smu0fvXcLzBd7gCTsLcFS64aAnBsEALw_wcB&gclsrc=aw.ds

• 
  @hhazelhoff13633 ай бұрын

  Also I’m very interested in buying a B52. I live in Florida, use. Do you know how I would go about doing that. And if there are service centers in the USA . Thx again. Great bike

• 
  @ozoutdorz25843 ай бұрын

  [email protected]

• 
  @hhazelhoff13633 ай бұрын

  @@ozoutdorz2584 thx you

• 
  @hhazelhoff13633 ай бұрын

  Th I ordered one three a Florida dealership. They say I’ll have it within two weeks straight from Australia, air freight. Incredible service. Let me know about that rear cargo rack. Cheers.

• 
  @hhazelhoff13633 ай бұрын

  Awesome video bro, can you tell me where you got that cargo rack/ vendor on the white bike. I need one. Looks pretty stout

• 
  @EBIKEScott3 ай бұрын

  If your riding offroad like this your hub motors should be laced in 17” moto rims. More torque = smaller diameter less overheating. Great vid