Hey Everyone! I make modification and off-road videos of Jeeps and trucks. Thanks for checking out my channel! Contact me with any questions at [email protected]
great work - hoping to make something similar for my Armada!
@TheZR2Kid11 күн бұрын
Man you made such good ZR2 content, have you thought about getting into it again? Like with the ZR2s?
@creativemanagement592127 күн бұрын
Please report any safety issues with a 2020 Chevrolet Colorado, because I have one & Portfolio or GMC not answering to repair my rear differential under insurance or any term,I paid the Truck for few years 35,000 and I still own,25,000 and it's my only transportation and they don't care about me walking to work for 30 minutes to 1 hour under the heat of Arizona to go to work to continue paying my Auto loan !!! having Portofolio extended Guarantee
@harolddenton603129 күн бұрын
I like those method wheels. I own a 2024 zr2 in harvest bronze metallic color. I feel that bronze colored wheels would look good on mt truck versus the stock wheels.
@pinecreekkennels85029 күн бұрын
Nice work!
@c14yt0nm4n13yАй бұрын
Not my zr2, miss my fx4 level 2 ranger dude. My zr2 is GARBAGE. NEVER had so many problems with a Truck in my 30years
@davidlaylon1235Ай бұрын
Well built!!
@davemc8598Ай бұрын
That is BADDASS!!
@210078Ай бұрын
Awesome!! Thank you!! Been researching this a ton...I have 33"s coming and I wanted to know what the fit would be WITHOUT a leveling kit! I plan on purchasing a BDS 4" lift and they recommend NOT to use a leveling kit with their 4" system!!!
@CharlesDonaldson-oz2dl2 ай бұрын
Take a calculator. Multiply 285 * 0.75 that's both side walls. Then divided by 25.4 and that will get you inches of the top and bottom sidewall Add 17 for the wheel, and you go with that figure regardless of what the actual brand and model of tires shows up would measure. You go by the size. Good job thanks thumbs up
@CharlesDonaldson-oz2dl2 ай бұрын
Okay but right at first I confused someone on the figure you come up with 285 multiplied by 75 is one side wall so it's doubled and then you add the wheel.
@robbylombardi14772 ай бұрын
The most amp draw the winch will use is about 450amps, did you find an Anderson plug that can handle that amperage?
@numbr173 ай бұрын
Excellent video! I am in WI, and would love to see some of these places someday with my 4Runner! Thanks for sharing all of the details.
@vepo23413 ай бұрын
Hi there, what is the tool name you are pushing the bolts opposite parts into the trucks bed? Thank you
@user-fk2dm5oy9f3 ай бұрын
I would like to try this place out this year with my jeep gladiator. I'd be coming from Minnesota.
@GearDownCrawlerz4 ай бұрын
what front an rear bumper are those. great driving ...
@schrodingerscat72184 ай бұрын
Meow.
@Onlyloversgetit4 ай бұрын
Hi, thank you so much for this! I found the tires but which option exactly did you choose? There’s so many different versions
@teampyle98354 ай бұрын
I have had a bed in the back of my jeep for about a year. I left the back rest of the back seat in and left it laying down. I started redoing it yesterday and thought id check youtube for ideas. Ultimately ive decided to strip the back rest to the skeleton so i removed the cushion and cover. Im adding plywood to extend it more with some legs for support. It still folds up and down for storage space like original under the back seat. Definitely nice to have a made bed for easy sleeping on adventures. Setting up camp is as easy as opening the hatch.
@Bruce60014 ай бұрын
Sounds like you should have just gotten the rubicon, definitely not (secure) enough for a stock jl
@jackschissler2555 ай бұрын
So the first bracket you screwed in over on the drivers side, What you use it for? 🤔
@markc62075 ай бұрын
I see this is 2 years old. I want to upgrade to dana 44's you did not change any mounting brackets? How is it holding up?
@jseldevillagran27525 ай бұрын
He went straight up redneck with the interior
@fallowthebigyellowtruck55335 ай бұрын
What a Chevy video.
@joeg92005 ай бұрын
Looks bad ass!!
@stephenorr25295 ай бұрын
Great video! Very good job with step by step process for the Dodge guys. Lot of hard work and nice final product. We can do this in the driveway with a mig and plasma cutter. Sturdy and good looking!
@granitesand785 ай бұрын
Did you have any rubbing in the rear? I’ve got the bushwacker flats on a 6in lift on 35s… they tuck really nicely right now but thinking of going 37s. Don’t really want to do notch flares. Thanks!
@Bearded_SARTECH6 ай бұрын
Came here years ago for the ZR2, stayed to see where it goes.
@campbelloffroad36605 ай бұрын
Thanks for the support!
@taterpie816 ай бұрын
How much of a 4x8 sheet of metal do you think you used?
@mikespitzack77966 ай бұрын
Zr2
@RI-qq1xt6 ай бұрын
Thanks for posting and enjoy SC! Great detail and information - just wondering can I purchase those main mounting brackets?
@mikegreer90416 ай бұрын
Anyone could drive around in there. There are a lot of sandy spots and lots of rocks , so air down. Nice park, but the park map is a joke. If you're new, just plan on being lost.
@marcusfields21796 ай бұрын
Crappy music
@nathanhighvoltage52596 ай бұрын
What bumper is that!
@E-bikeguy6 ай бұрын
I believe a hub motor is the way to go instead of a mid drive like this therefore you can keep your peddles because soon as that chain pops it will be a long push back to the house if you is far away of course.
@robharden45036 ай бұрын
There's a reason no one else has done this, this is the most ridiculous thing I've ever seen, as a builder I'm embarrassed, for the same price you spent you could have had a bad ass bike. I would normally never do anything like this, but thus is ridiculous.
@Altema226 ай бұрын
Cool project, and you have some clever work with the drivetrain there. Pushing 3,000 watts at 72v will require 41.67 amps, and I don't think those Ryobi batteries can deliver that. I have some myself that were given to me, and it's unfortunate that they do not give the output amperage. I did find a website that claimed they output 20amps, but that seems optimistic based on the weak performance of the tools I have. The go cart battery should fix that though! Thanks for the video!
@Eric_Tennant6 ай бұрын
Redesigning the wheel here. One plus side is 4 of those batteries can go on a plane. My batteries are to big to fly. Update: So now your using a big one.
@revan60596 ай бұрын
you need better brakes asap
@campbelloffroad36606 ай бұрын
I agree, once I get it running I’ll be look for a disc brake kit for the front
@rynax0096 ай бұрын
what range could 4 batteries get?
@campbelloffroad36606 ай бұрын
2-5 miles
@Eric_Tennant6 ай бұрын
@@campbelloffroad3660 That's not good.
@campbelloffroad36606 ай бұрын
@@Eric_Tennant my initial test ride was with 4 4ah batteries and I got about 3 miles. My first test ride on 8 batteries, adding 4 6ah batteries I went 5 miles and all 8 batteries were showing 50% the test ride after that was when the batteries started failing on me, 5/8 batteries were no longer able to be charged
@Eric_Tennant6 ай бұрын
@@campbelloffroad3660 Think you maybe pulling more amps then these can handle triggering the BMS to turn off the battery. (3000watt / 72v) = 41.66amp. So with 8 each one needs to putout 21amps. Happy your going with a pack. As I could see drill batteries costing more in the long run.
@campbelloffroad36606 ай бұрын
@@Eric_Tennant Ahhh thank you for pointing out where my math was wrong, I was doing 42 amps/ 8 batteries and didn’t understand why they couldn’t handle it. Makes sense now!
@gregvandeputte95766 ай бұрын
2022 Colorado ZR2 Bison
@Todd_S6 ай бұрын
Have you had any issues with the zinc plated rivet nuts rusting in your truck bed? I know Wisconsin has harsh winters. I debating on upgrading to stainless steel rivet nuts in my truck bed.
@earnestbass40436 ай бұрын
Plenty of cable size, and I use the same setup when plowing.
@dwil97437 ай бұрын
I have an 04 same cooler and was wondering how this bumper style would look on my truck with the leer topper and everything. Thank you.
@graciemiller95967 ай бұрын
Nice job
@x5or7 ай бұрын
Great and Lovely work mate 👏 I also built my own one posted few weeks ago but differently
@johnmichaels43308 ай бұрын
Always keep a breaker bar under the seat for those road rage warriors.
@TON_KROW8 ай бұрын
Omg take your sway bar off
@WAKLETT20098 ай бұрын
Nice work! what brand is your plasma cutter.
@brianwalker19339 ай бұрын
An excellent job mate and it looks awesome too. New subscriber, watching from Australia. 🇦🇺
Пікірлер
Those are 31s ?
great work - hoping to make something similar for my Armada!
Man you made such good ZR2 content, have you thought about getting into it again? Like with the ZR2s?
Please report any safety issues with a 2020 Chevrolet Colorado, because I have one & Portfolio or GMC not answering to repair my rear differential under insurance or any term,I paid the Truck for few years 35,000 and I still own,25,000 and it's my only transportation and they don't care about me walking to work for 30 minutes to 1 hour under the heat of Arizona to go to work to continue paying my Auto loan !!! having Portofolio extended Guarantee
I like those method wheels. I own a 2024 zr2 in harvest bronze metallic color. I feel that bronze colored wheels would look good on mt truck versus the stock wheels.
Nice work!
Not my zr2, miss my fx4 level 2 ranger dude. My zr2 is GARBAGE. NEVER had so many problems with a Truck in my 30years
Well built!!
That is BADDASS!!
Awesome!! Thank you!! Been researching this a ton...I have 33"s coming and I wanted to know what the fit would be WITHOUT a leveling kit! I plan on purchasing a BDS 4" lift and they recommend NOT to use a leveling kit with their 4" system!!!
Take a calculator. Multiply 285 * 0.75 that's both side walls. Then divided by 25.4 and that will get you inches of the top and bottom sidewall Add 17 for the wheel, and you go with that figure regardless of what the actual brand and model of tires shows up would measure. You go by the size. Good job thanks thumbs up
Okay but right at first I confused someone on the figure you come up with 285 multiplied by 75 is one side wall so it's doubled and then you add the wheel.
The most amp draw the winch will use is about 450amps, did you find an Anderson plug that can handle that amperage?
Excellent video! I am in WI, and would love to see some of these places someday with my 4Runner! Thanks for sharing all of the details.
Hi there, what is the tool name you are pushing the bolts opposite parts into the trucks bed? Thank you
I would like to try this place out this year with my jeep gladiator. I'd be coming from Minnesota.
what front an rear bumper are those. great driving ...
Meow.
Hi, thank you so much for this! I found the tires but which option exactly did you choose? There’s so many different versions
I have had a bed in the back of my jeep for about a year. I left the back rest of the back seat in and left it laying down. I started redoing it yesterday and thought id check youtube for ideas. Ultimately ive decided to strip the back rest to the skeleton so i removed the cushion and cover. Im adding plywood to extend it more with some legs for support. It still folds up and down for storage space like original under the back seat. Definitely nice to have a made bed for easy sleeping on adventures. Setting up camp is as easy as opening the hatch.
Sounds like you should have just gotten the rubicon, definitely not (secure) enough for a stock jl
So the first bracket you screwed in over on the drivers side, What you use it for? 🤔
I see this is 2 years old. I want to upgrade to dana 44's you did not change any mounting brackets? How is it holding up?
He went straight up redneck with the interior
What a Chevy video.
Looks bad ass!!
Great video! Very good job with step by step process for the Dodge guys. Lot of hard work and nice final product. We can do this in the driveway with a mig and plasma cutter. Sturdy and good looking!
Did you have any rubbing in the rear? I’ve got the bushwacker flats on a 6in lift on 35s… they tuck really nicely right now but thinking of going 37s. Don’t really want to do notch flares. Thanks!
Came here years ago for the ZR2, stayed to see where it goes.
Thanks for the support!
How much of a 4x8 sheet of metal do you think you used?
Zr2
Thanks for posting and enjoy SC! Great detail and information - just wondering can I purchase those main mounting brackets?
Anyone could drive around in there. There are a lot of sandy spots and lots of rocks , so air down. Nice park, but the park map is a joke. If you're new, just plan on being lost.
Crappy music
What bumper is that!
I believe a hub motor is the way to go instead of a mid drive like this therefore you can keep your peddles because soon as that chain pops it will be a long push back to the house if you is far away of course.
There's a reason no one else has done this, this is the most ridiculous thing I've ever seen, as a builder I'm embarrassed, for the same price you spent you could have had a bad ass bike. I would normally never do anything like this, but thus is ridiculous.
Cool project, and you have some clever work with the drivetrain there. Pushing 3,000 watts at 72v will require 41.67 amps, and I don't think those Ryobi batteries can deliver that. I have some myself that were given to me, and it's unfortunate that they do not give the output amperage. I did find a website that claimed they output 20amps, but that seems optimistic based on the weak performance of the tools I have. The go cart battery should fix that though! Thanks for the video!
Redesigning the wheel here. One plus side is 4 of those batteries can go on a plane. My batteries are to big to fly. Update: So now your using a big one.
you need better brakes asap
I agree, once I get it running I’ll be look for a disc brake kit for the front
what range could 4 batteries get?
2-5 miles
@@campbelloffroad3660 That's not good.
@@Eric_Tennant my initial test ride was with 4 4ah batteries and I got about 3 miles. My first test ride on 8 batteries, adding 4 6ah batteries I went 5 miles and all 8 batteries were showing 50% the test ride after that was when the batteries started failing on me, 5/8 batteries were no longer able to be charged
@@campbelloffroad3660 Think you maybe pulling more amps then these can handle triggering the BMS to turn off the battery. (3000watt / 72v) = 41.66amp. So with 8 each one needs to putout 21amps. Happy your going with a pack. As I could see drill batteries costing more in the long run.
@@Eric_Tennant Ahhh thank you for pointing out where my math was wrong, I was doing 42 amps/ 8 batteries and didn’t understand why they couldn’t handle it. Makes sense now!
2022 Colorado ZR2 Bison
Have you had any issues with the zinc plated rivet nuts rusting in your truck bed? I know Wisconsin has harsh winters. I debating on upgrading to stainless steel rivet nuts in my truck bed.
Plenty of cable size, and I use the same setup when plowing.
I have an 04 same cooler and was wondering how this bumper style would look on my truck with the leer topper and everything. Thank you.
Nice job
Great and Lovely work mate 👏 I also built my own one posted few weeks ago but differently
Always keep a breaker bar under the seat for those road rage warriors.
Omg take your sway bar off
Nice work! what brand is your plasma cutter.
An excellent job mate and it looks awesome too. New subscriber, watching from Australia. 🇦🇺