Nice work Steto! Good to see some new content. Thanks for sharing! :)
@stetofixКүн бұрын
Thank you. :)
@whlo30493 күн бұрын
👍
@stetofix3 күн бұрын
:) Thanks
@Altai200014 күн бұрын
Трафарет не судьба купить😂
@stetofix14 күн бұрын
Yes, it would be nice to have a fitting stencil for every ic. But sometimes it is quicker to reball by hand instead of waiting for a stencil to be delivered. :)
@Altai200013 күн бұрын
@@stetofix Ну каждый раз по 300 шаров выкладывать :), лучше подождать трафарет.
@acswalesАй бұрын
Congrats on 500 subs. We've all done that. Forget to turn the main power on. I do it at least once a week. 😆
@stetofix29 күн бұрын
Thank you. :) Sometimes the same with the soldering station. I pick the soldering iron and I'm wondering why the solder isn't melting... XD
@aaadnanmooАй бұрын
I think the problem is APU Reballing
@stetofixАй бұрын
Thanks for the tip. Yes, reballing the APU could solve the issue. I should try it. :)
@Port-repairАй бұрын
Top 👍hab auch noch ne xbox series x mit beep on beep off. Hab nur noch nicht rausgefunden wo der Fehler sein könnte. Vielleicht ist es bei mir ja auch ein Powermosfet. Weiter so✌️
@stetofixАй бұрын
Danke schön. :) Dass einer der Powermosfets durch ist, habe ich immer wieder. Bisher auch tatsächlich viel Glück gehabt, so dass ich mit dem Messen der umliegenden Komponenten den fehlerhaften ausmachen konnte ohne große Auslötaktionen.
@Port-repairАй бұрын
@@stetofix hatte auch einen Defekten am powermosfet. Allerdings auf der 12v rail. Aber jetzt ist immernoch irgendwo was defekt. Immer noch beep on beep off.
@davidstrider2007Ай бұрын
Nice work buddy! Customer system or purchase to fix and sell?
@stetofixАй бұрын
Thank you. :) The Xbox was at a repair shop before and the seller just wanted to get rid of the Xbox. So I bought it from him.
@davidstrider2007Ай бұрын
@@stetofix score for you. That's great! :)
@dreamspec1662Ай бұрын
Nice dignosis :)
@stetofixАй бұрын
Thank you. :)
@phynx-victumterra652Ай бұрын
Nice fix :)
@stetofixАй бұрын
Thank you. :)
@user-um2sq2em6eАй бұрын
Southbridge ic
@stetofixАй бұрын
Thanks for the hint. I replaced the southbridge but no change to the issue. :)
@davidstrider2007Ай бұрын
More great content from Stetofix. Where did you source the laser from? Aliexpress? Love it! :) Wishing you a great weekend bud!
@stetofixАй бұрын
Thank you. :) Yes, the laser is from AliExpress. If I need a part next day, I have another seller. His parts are also from AliExpress, but doesn't need six days to be delivered.
@petereldergill2942Ай бұрын
Are the laser replacements expensive?
@stetofixАй бұрын
It is cheaper than selling a PS5 with a not working disc drive and buy another working one. :) I usually do this repair for 80€.
@Szymanski52Ай бұрын
Where do it get the stencil u used?
@stetofixАй бұрын
If you search at Aliexpress.com for 'amaoe switch stencil', the stencil shows up.
@klorslug2 ай бұрын
So many PS5 repair videos I’ve seen lately have cracked corners on the APUs 🧐
@stetofix2 ай бұрын
Very true. Beside the new modell, where the the heatsink is poorly glued to the holding bracket, which causes a very nice lever to press uneven on the APU top, if become loose, I'm wondering what is the cause at the older modells, where in my experience the heatsink shows no noticeable movement.
@phynx-victumterra6522 ай бұрын
Knew this video was coming :)
@stetofix2 ай бұрын
Thanks for your support. :)
@davidstrider20072 ай бұрын
You have done it again. Great work :)
@stetofix2 ай бұрын
Thank you. :)
@mart432 ай бұрын
Try using your voice, it won't harm anyone.
@stetofix2 ай бұрын
I will try it in one of the next videos. :)
@davidstrider20072 ай бұрын
Way to go! You always provide very informative and interesting content buddy! Cheers to another victory!
@stetofix2 ай бұрын
Thank you. :)
@davidstrider20072 ай бұрын
Nice work as always Stetofix. Keep up the great work buddy! "Cheers!"
@stetofix2 ай бұрын
Thank you. :)
@techtronics72 ай бұрын
Good work and fixing your error.
@stetofix2 ай бұрын
Thank you. :)
@contagiousdoge30542 ай бұрын
🎉very nice video... I have a ps5(edm-020) with my disk drive issue.It was making weird grinding noise after i press eject button.Im stuck in a loop.So I decided to open and realign the drive...after that The drive will work perfectly when i place it horizontally...but the moment I put it vertical..ir will take cd...but after the first ejection the drive will keep on making grinding noise and it will no longer take cd unless I realign and put the ps5 horizon....Im super lost Can you please suggest me how to diagnose next?Thank so so much❤❤❤❤
@stetofix2 ай бұрын
Thank you. The description of the drive's behavior sounds a bit like a problem with the gearbox. Maybe one of the gears damaged?
@contagiousdoge30542 ай бұрын
@@stetofix thank you for the reply. Also when i switch it on ...one of the 2 black ic on the disc drive logice board heats up within one minute...is this normal? Also the gear looks good...like is there a way to open it fully to check? Because it just wont work at all when placed vertically...but only function horizontally.. thanks for your heĺp i appreciate it
@stetofix2 ай бұрын
There is the manual eject screw head. If you turn it, with a screwdriver, you can check if a disc will be transported correctly in and out. I would test multible times if this works in both orientations without any issues.
@contagiousdoge30542 ай бұрын
@@stetofix i did the manual eject with a scredriver....it works fine taking and ejecting the discs...so what do you think is the real issue please
@stetofix2 ай бұрын
@@contagiousdoge3054 I don't think that is an electrical issue, because this would appear regardless which orientation the PS5 has. I would remove the outer housing shell and check where the noise is coming from.
@Rartillo2 ай бұрын
Whats size are the balls ?
@exile91562 ай бұрын
Sad :(
@stetofix2 ай бұрын
Sometimes you lose, sometimes the other wins. :) And if no fix it could be used for parts.
@FuNnY718182 ай бұрын
Great job. What ips screen did you use?
@stetofix2 ай бұрын
Thank you. :) I think the display mod set is from Hispeedido. Here is a link: (aliexpress.com/item/1005005980997492.html)
@davidstrider20072 ай бұрын
Nice work! Your game playing needs some improvement though buddy. Hehe :)
@stetofix2 ай бұрын
Thank you. :) Sometimes I think the games from the old days are harder to play... or am I getting old? XD
@davidstrider20072 ай бұрын
No you are totally right. I also think the gameplay was better then for some reason. It is all about graphics these days. :)
@jazero-u7p3 ай бұрын
It was pleasure to watch and thank you.
@stetofix2 ай бұрын
Thank you. :)
@Alycanj3 ай бұрын
read a story early launch of a strange noise, turned out to a internal sticker from the factory somewhere had came loose and was flapping when ps5 was on,
@stetofix3 ай бұрын
Thanks for the hint. I took the PS5 apart and put a wire between psu and mainboard. It seems that the noise is coming from around the drmos ics.
@Alycanj3 ай бұрын
Nice work, wonder what they did to blow so many fuses
@stetofix3 ай бұрын
Thank you. :) The blown 12V fuse could be caused by overload at the mechanic. Pushing or pulling the disc while in transfer. But for the 5V rail I'm not sure...
@coladict3 ай бұрын
This looks like an ongoing problem since the PS4, PS4 Pro and continuing to the PS5 and probably the upcoming PS5 Pro. Their connectors are too tight, so if the person cleaning up the console isn't extremely careful, the fan (or previously also power connector) can rip off. It hasn't happened to me so far, and I always feel how stubborn those connectors are to remove and I use a small flat-head screwdriver to push the two apart, so that way I'm pushing the connector to the board instead of off of it.
@stetofix3 ай бұрын
I sometimes think that this design is made on purpuse. Easy to forget and then ripped off while taking the console apart. At least Sony made an easy access to fan at the PS5. XD
@mm00773 ай бұрын
Perfect job. My preference, would have used braid on all the traces.
@stetofix3 ай бұрын
Thank you. :) Would be an option to use braid on all traces. I will test it next time.
@mm00773 ай бұрын
@@stetofix Your method is excellent and I used to do it the same. Now I find braid is easier to work with and quicker and prefer doing this like on ripped fan connectors. I have many sizes of braid to do this. I even use on ripped hdmi connectors. To note it is a matter of preference.
@moonwalkerr873 ай бұрын
Using Nintendo HDMI cable on PS5? :D
@stetofix3 ай бұрын
Sure. The Nintendo HDMI cable is more flexible than other HDMI cables. Good eye for details. :)
@klorslug3 ай бұрын
Nice fix! I’m working on replacing a torn off Micro USB on a Yeti mic. All 6 anchor points torn off and 1 torn trace. Gonna try to epoxy a pice of copper foil to repair the anchor points.
@stetofix3 ай бұрын
Thank you. :) Restoring six tiny anchor points for a Micro USB sounds a bit harder than the two big anchor points that I restored. Good luck.
@acswales3 ай бұрын
Interesting way of doing 'bodge' wiring. I am going to give that a try. Looks more secure than a single wire. Would you not have been better bending the wires before soldering the 1st leg. measure it up after bending and cutting the two legs off. Enjoyed that one. Thanks
@stetofix3 ай бұрын
Thank you. :) Yes, it would been easier to prepare the wires before soldering. The idea developed while soldering the single wire. So I guess, it will be something for the next similar pad restauration.
@davidstrider20073 ай бұрын
Nice buddy! Customer machine or ebay find and flip?
@stetofix3 ай бұрын
Thank you. I found the PS5 for sale and ask the seller if he would be interested in a repair. He said 'Yes' and send me the machine. Now he is happy to be able to continue using his PS5. :)
@davidstrider20073 ай бұрын
@@stetofix That is awesome buddy. Pay it forward. :)
@davidstrider20073 ай бұрын
Great video as always buddy. Thank you for taking the time to post. Good stuff! :)
@stetofix3 ай бұрын
Thank you. :)
@NOMADxBR3 ай бұрын
What is the name of your preheater? (In 10:49)
@stetofix3 ай бұрын
It is a Aoyue Int 853A Pro
@moioi35633 ай бұрын
I thought the SSD controller chipset was married?! This is not the case, can we change it then?
@stetofix3 ай бұрын
The ssd controller is exchangeable. Three of the six ssd ics are no exchangeable, because there is unique data on it.
@moioi35633 ай бұрын
so there is the nand ssd which contains the firmware, what are the other two non-interchangeable chips please?@@stetofix
@stetofix3 ай бұрын
There are three ssd nand ics which can not be swapped. If they are swapped, the PS5 will not turn on anymore. On ssd controller side the single one. On the backside the both in the same orientation.
@moioi35633 ай бұрын
this is very valuable information thank you very much@@stetofix
@moioi35633 ай бұрын
@@stetofix I have the error code 80871055 SSD and 80C00140 GDDR6 with uart, do you advise me to replace the SSD chipset or change the GDDR6 ?
@MrLasox4 ай бұрын
Thanks alot very good video. I like that you are using text instead of the voice or music. Alot of these repairs people are talking too much and that you explain everything you are doing is amaing because i'm just bhought my self a reapir system so i'm about to start it my self so learning step-by-step how to reballing is very useful. I have seen hundreds of videos about doing repairs, but this video has too be the best one so far. Even though you didn't fix the issue, but you showed alot of issue too fix in details.
@stetofix3 ай бұрын
Thank you.
@ferrellsl4 ай бұрын
Why so quiet? Cat got your tongue?
@stetofix4 ай бұрын
😂 Atm I'm more focused on repairing than explaining what I'm doing. I will try in one of my next videos to talk my viewers through my work.
@rippedtraces4 ай бұрын
Thank you for making a video about our product. Great repair!
@stetofix4 ай бұрын
It makes the repair of many torn pads affordable again. Thank you very much for this good product. :)
@MilitaireSansFrontieres-ry1yw4 ай бұрын
Great work may I ask where did you get mb preheater
@stetofix4 ай бұрын
Thank you. It is an AOYUE Int853A Pro. I bought it from a german seller. This offer should be the same: www.walmart.com/ip/Aoyue-853A-Pro-Quartz-Preheating-Station/513903268
@MilitaireSansFrontieres-ry1yw4 ай бұрын
@@stetofixthanks I appreciate the hasty response
@cabbitkisser26204 ай бұрын
i bought a couple of game gears & i turn them on. look like the screen are all messed up & blurred
@stetofix4 ай бұрын
Even with new caps on the board, the old original screen is no longer as clear, evenly lit and viewing angle stable as we are used to on current mobile devices/PCs/TVs. But it is authentic with the experiences 30 years ago. :) Here is a side by side comparison of the original screen and a actual clear screen mod: kzread.info/dash/bejne/oolozNCMhsnAo6w.html
@Can3Fix4 ай бұрын
Nice work!
@stetofix4 ай бұрын
Thank you. :)
@FuNnY718184 ай бұрын
Hey, I just did one of these myself. I had to order the thermal fuses to get the screen working too, but it's running like yesteryear lol.
@stetofix4 ай бұрын
Nice. It's nice to see old, beloved items brought back to life.
@davidstrider20074 ай бұрын
Nice work buddy! :) Boy that game system brings back memories lol
@stetofix4 ай бұрын
Thank you. Starting the Game Gear and hearing the sound, is like jumping 30 years back in time. :)
@davidstrider20074 ай бұрын
So true! Lol
@marcosbarbosa46345 ай бұрын
buito bom o video consegui deixa tabela codigo erros
@stetofix5 ай бұрын
Muito obrigado.
@Can3Fix5 ай бұрын
Please, can you explain to me what I need to start the UART, I have a CH341A, I know how to connect GND, RX and TX, jumper to the second and third pin. What do I need from the program, do I need to pay anything, is there a tutorial for it, any help would be great, thanks?
@stetofix5 ай бұрын
Here is a link to gbatemp.net: ( gbatemp.net/threads/ps5-uart-setup-ch341a.647692/ ) I use the free program PS5 Wee Tools from Andy-man. ( github.com/andy-man/ps5-wee-tools ) An error code list is here: gbatemp.net/threads/ps5-uart-commands.642741/post-10305776 If you want to buy an expensive all-in-one solution: I would check BwE.
@Can3Fix5 ай бұрын
@@stetofix Ok, I downloaded this wee tool, when I run it nothing happens, then I downloaded python and it starts but it says "no module named serial" I don't know what to do next.
@stetofix5 ай бұрын
@@Can3Fix I downloaded the zip from the release page, unzipped it and started the exe. If this is not working for you, I don't have any ideas. Sorry.
@thiagoevolucion44925 ай бұрын
Where can I get that notepad with the checklist of errors
@stetofix5 ай бұрын
I posted a error code list at gbatemp.net. (gbatemp.net/threads/ps5-uart-commands.642741/post-10305776)
@Steve_be5 ай бұрын
It happens
@stetofix5 ай бұрын
sometimes you lose, sometimes the others win ;)
@schadowman895 ай бұрын
Coole Sache. Hatte vorher nie was davon gehört oder gesehen. Top! Übrigens das mit dem Programmer am PC erkennen hat dann geklappt nachdem ich den Jumper versetzt hatte. Musste aber den Programmer noch preparieren damit er UART ausließt.
@stetofix5 ай бұрын
Die USB Flex Fix Methode finde ich sehr praktisch, wenn doch ein paar mehr Pads auf dem Board fehlen. :)
Пікірлер
Nice work Steto! Good to see some new content. Thanks for sharing! :)
Thank you. :)
👍
:) Thanks
Трафарет не судьба купить😂
Yes, it would be nice to have a fitting stencil for every ic. But sometimes it is quicker to reball by hand instead of waiting for a stencil to be delivered. :)
@@stetofix Ну каждый раз по 300 шаров выкладывать :), лучше подождать трафарет.
Congrats on 500 subs. We've all done that. Forget to turn the main power on. I do it at least once a week. 😆
Thank you. :) Sometimes the same with the soldering station. I pick the soldering iron and I'm wondering why the solder isn't melting... XD
I think the problem is APU Reballing
Thanks for the tip. Yes, reballing the APU could solve the issue. I should try it. :)
Top 👍hab auch noch ne xbox series x mit beep on beep off. Hab nur noch nicht rausgefunden wo der Fehler sein könnte. Vielleicht ist es bei mir ja auch ein Powermosfet. Weiter so✌️
Danke schön. :) Dass einer der Powermosfets durch ist, habe ich immer wieder. Bisher auch tatsächlich viel Glück gehabt, so dass ich mit dem Messen der umliegenden Komponenten den fehlerhaften ausmachen konnte ohne große Auslötaktionen.
@@stetofix hatte auch einen Defekten am powermosfet. Allerdings auf der 12v rail. Aber jetzt ist immernoch irgendwo was defekt. Immer noch beep on beep off.
Nice work buddy! Customer system or purchase to fix and sell?
Thank you. :) The Xbox was at a repair shop before and the seller just wanted to get rid of the Xbox. So I bought it from him.
@@stetofix score for you. That's great! :)
Nice dignosis :)
Thank you. :)
Nice fix :)
Thank you. :)
Southbridge ic
Thanks for the hint. I replaced the southbridge but no change to the issue. :)
More great content from Stetofix. Where did you source the laser from? Aliexpress? Love it! :) Wishing you a great weekend bud!
Thank you. :) Yes, the laser is from AliExpress. If I need a part next day, I have another seller. His parts are also from AliExpress, but doesn't need six days to be delivered.
Are the laser replacements expensive?
It is cheaper than selling a PS5 with a not working disc drive and buy another working one. :) I usually do this repair for 80€.
Where do it get the stencil u used?
If you search at Aliexpress.com for 'amaoe switch stencil', the stencil shows up.
So many PS5 repair videos I’ve seen lately have cracked corners on the APUs 🧐
Very true. Beside the new modell, where the the heatsink is poorly glued to the holding bracket, which causes a very nice lever to press uneven on the APU top, if become loose, I'm wondering what is the cause at the older modells, where in my experience the heatsink shows no noticeable movement.
Knew this video was coming :)
Thanks for your support. :)
You have done it again. Great work :)
Thank you. :)
Try using your voice, it won't harm anyone.
I will try it in one of the next videos. :)
Way to go! You always provide very informative and interesting content buddy! Cheers to another victory!
Thank you. :)
Nice work as always Stetofix. Keep up the great work buddy! "Cheers!"
Thank you. :)
Good work and fixing your error.
Thank you. :)
🎉very nice video... I have a ps5(edm-020) with my disk drive issue.It was making weird grinding noise after i press eject button.Im stuck in a loop.So I decided to open and realign the drive...after that The drive will work perfectly when i place it horizontally...but the moment I put it vertical..ir will take cd...but after the first ejection the drive will keep on making grinding noise and it will no longer take cd unless I realign and put the ps5 horizon....Im super lost Can you please suggest me how to diagnose next?Thank so so much❤❤❤❤
Thank you. The description of the drive's behavior sounds a bit like a problem with the gearbox. Maybe one of the gears damaged?
@@stetofix thank you for the reply. Also when i switch it on ...one of the 2 black ic on the disc drive logice board heats up within one minute...is this normal? Also the gear looks good...like is there a way to open it fully to check? Because it just wont work at all when placed vertically...but only function horizontally.. thanks for your heĺp i appreciate it
There is the manual eject screw head. If you turn it, with a screwdriver, you can check if a disc will be transported correctly in and out. I would test multible times if this works in both orientations without any issues.
@@stetofix i did the manual eject with a scredriver....it works fine taking and ejecting the discs...so what do you think is the real issue please
@@contagiousdoge3054 I don't think that is an electrical issue, because this would appear regardless which orientation the PS5 has. I would remove the outer housing shell and check where the noise is coming from.
Whats size are the balls ?
Sad :(
Sometimes you lose, sometimes the other wins. :) And if no fix it could be used for parts.
Great job. What ips screen did you use?
Thank you. :) I think the display mod set is from Hispeedido. Here is a link: (aliexpress.com/item/1005005980997492.html)
Nice work! Your game playing needs some improvement though buddy. Hehe :)
Thank you. :) Sometimes I think the games from the old days are harder to play... or am I getting old? XD
No you are totally right. I also think the gameplay was better then for some reason. It is all about graphics these days. :)
It was pleasure to watch and thank you.
Thank you. :)
read a story early launch of a strange noise, turned out to a internal sticker from the factory somewhere had came loose and was flapping when ps5 was on,
Thanks for the hint. I took the PS5 apart and put a wire between psu and mainboard. It seems that the noise is coming from around the drmos ics.
Nice work, wonder what they did to blow so many fuses
Thank you. :) The blown 12V fuse could be caused by overload at the mechanic. Pushing or pulling the disc while in transfer. But for the 5V rail I'm not sure...
This looks like an ongoing problem since the PS4, PS4 Pro and continuing to the PS5 and probably the upcoming PS5 Pro. Their connectors are too tight, so if the person cleaning up the console isn't extremely careful, the fan (or previously also power connector) can rip off. It hasn't happened to me so far, and I always feel how stubborn those connectors are to remove and I use a small flat-head screwdriver to push the two apart, so that way I'm pushing the connector to the board instead of off of it.
I sometimes think that this design is made on purpuse. Easy to forget and then ripped off while taking the console apart. At least Sony made an easy access to fan at the PS5. XD
Perfect job. My preference, would have used braid on all the traces.
Thank you. :) Would be an option to use braid on all traces. I will test it next time.
@@stetofix Your method is excellent and I used to do it the same. Now I find braid is easier to work with and quicker and prefer doing this like on ripped fan connectors. I have many sizes of braid to do this. I even use on ripped hdmi connectors. To note it is a matter of preference.
Using Nintendo HDMI cable on PS5? :D
Sure. The Nintendo HDMI cable is more flexible than other HDMI cables. Good eye for details. :)
Nice fix! I’m working on replacing a torn off Micro USB on a Yeti mic. All 6 anchor points torn off and 1 torn trace. Gonna try to epoxy a pice of copper foil to repair the anchor points.
Thank you. :) Restoring six tiny anchor points for a Micro USB sounds a bit harder than the two big anchor points that I restored. Good luck.
Interesting way of doing 'bodge' wiring. I am going to give that a try. Looks more secure than a single wire. Would you not have been better bending the wires before soldering the 1st leg. measure it up after bending and cutting the two legs off. Enjoyed that one. Thanks
Thank you. :) Yes, it would been easier to prepare the wires before soldering. The idea developed while soldering the single wire. So I guess, it will be something for the next similar pad restauration.
Nice buddy! Customer machine or ebay find and flip?
Thank you. I found the PS5 for sale and ask the seller if he would be interested in a repair. He said 'Yes' and send me the machine. Now he is happy to be able to continue using his PS5. :)
@@stetofix That is awesome buddy. Pay it forward. :)
Great video as always buddy. Thank you for taking the time to post. Good stuff! :)
Thank you. :)
What is the name of your preheater? (In 10:49)
It is a Aoyue Int 853A Pro
I thought the SSD controller chipset was married?! This is not the case, can we change it then?
The ssd controller is exchangeable. Three of the six ssd ics are no exchangeable, because there is unique data on it.
so there is the nand ssd which contains the firmware, what are the other two non-interchangeable chips please?@@stetofix
There are three ssd nand ics which can not be swapped. If they are swapped, the PS5 will not turn on anymore. On ssd controller side the single one. On the backside the both in the same orientation.
this is very valuable information thank you very much@@stetofix
@@stetofix I have the error code 80871055 SSD and 80C00140 GDDR6 with uart, do you advise me to replace the SSD chipset or change the GDDR6 ?
Thanks alot very good video. I like that you are using text instead of the voice or music. Alot of these repairs people are talking too much and that you explain everything you are doing is amaing because i'm just bhought my self a reapir system so i'm about to start it my self so learning step-by-step how to reballing is very useful. I have seen hundreds of videos about doing repairs, but this video has too be the best one so far. Even though you didn't fix the issue, but you showed alot of issue too fix in details.
Thank you.
Why so quiet? Cat got your tongue?
😂 Atm I'm more focused on repairing than explaining what I'm doing. I will try in one of my next videos to talk my viewers through my work.
Thank you for making a video about our product. Great repair!
It makes the repair of many torn pads affordable again. Thank you very much for this good product. :)
Great work may I ask where did you get mb preheater
Thank you. It is an AOYUE Int853A Pro. I bought it from a german seller. This offer should be the same: www.walmart.com/ip/Aoyue-853A-Pro-Quartz-Preheating-Station/513903268
@@stetofixthanks I appreciate the hasty response
i bought a couple of game gears & i turn them on. look like the screen are all messed up & blurred
Even with new caps on the board, the old original screen is no longer as clear, evenly lit and viewing angle stable as we are used to on current mobile devices/PCs/TVs. But it is authentic with the experiences 30 years ago. :) Here is a side by side comparison of the original screen and a actual clear screen mod: kzread.info/dash/bejne/oolozNCMhsnAo6w.html
Nice work!
Thank you. :)
Hey, I just did one of these myself. I had to order the thermal fuses to get the screen working too, but it's running like yesteryear lol.
Nice. It's nice to see old, beloved items brought back to life.
Nice work buddy! :) Boy that game system brings back memories lol
Thank you. Starting the Game Gear and hearing the sound, is like jumping 30 years back in time. :)
So true! Lol
buito bom o video consegui deixa tabela codigo erros
Muito obrigado.
Please, can you explain to me what I need to start the UART, I have a CH341A, I know how to connect GND, RX and TX, jumper to the second and third pin. What do I need from the program, do I need to pay anything, is there a tutorial for it, any help would be great, thanks?
Here is a link to gbatemp.net: ( gbatemp.net/threads/ps5-uart-setup-ch341a.647692/ ) I use the free program PS5 Wee Tools from Andy-man. ( github.com/andy-man/ps5-wee-tools ) An error code list is here: gbatemp.net/threads/ps5-uart-commands.642741/post-10305776 If you want to buy an expensive all-in-one solution: I would check BwE.
@@stetofix Ok, I downloaded this wee tool, when I run it nothing happens, then I downloaded python and it starts but it says "no module named serial" I don't know what to do next.
@@Can3Fix I downloaded the zip from the release page, unzipped it and started the exe. If this is not working for you, I don't have any ideas. Sorry.
Where can I get that notepad with the checklist of errors
I posted a error code list at gbatemp.net. (gbatemp.net/threads/ps5-uart-commands.642741/post-10305776)
It happens
sometimes you lose, sometimes the others win ;)
Coole Sache. Hatte vorher nie was davon gehört oder gesehen. Top! Übrigens das mit dem Programmer am PC erkennen hat dann geklappt nachdem ich den Jumper versetzt hatte. Musste aber den Programmer noch preparieren damit er UART ausließt.
Die USB Flex Fix Methode finde ich sehr praktisch, wenn doch ein paar mehr Pads auf dem Board fehlen. :)
Ja auf jeden Fall 👍