Will 3.73 rear end gears will work for that set up? What best rear end gears are best for street?
@304Hollywood2 ай бұрын
Nice video
@rogaalviar22333 ай бұрын
Did you run the phaser cam limiters ?
@mudbone74015 ай бұрын
that 3v @ 2:30 has twin turbos now. i know him IRL lol
@saffarco55 ай бұрын
Beautiful video, gives everybody the right expectations.
@Marine2111usmc5 ай бұрын
And please tell me you torked everything down.
@Marine2111usmc5 ай бұрын
Hope you did the oil pump gear and crank shaft pulley upgrade while you were in there.
@marksiniard97316 ай бұрын
Humidity and tires could affect your numbers but, honestly those arent bad numbers for a gen 1 with your mods. Radial tires always make more power on a dyno. You can loose 20 or more hp with the wrong tire on a dyno.
@mikejautosandstuff33497 ай бұрын
Hey how the Maserati doing?? You haven’t talked about it in a while. 🤔
@Alexiscisnero7 ай бұрын
Still have it just haven’t had any content to make with it!
@kartgal7 ай бұрын
Video games are a great way you can relax. And sometimes relaxing is the most productive thing you should be doing
@kartgal7 ай бұрын
Pain in the dick to get it set up 😂
@kartgal7 ай бұрын
GaryVee sent me here 🥊
@mikejautosandstuff33497 ай бұрын
Monk mode 😝 lol.
@jordonnohel29867 ай бұрын
😌 promo sm
@midnight3478 ай бұрын
18 manifold is better for the money if youre not doing cams. If you wanna do max effort na it takes a ported cobra jet and cams peripd point blank. You can get a gen 1 to 500 rwhp or better with those mods on e with long tubes. You dont see the true benefit of the cj without cams. This is why people think its not much better than an 18 because with stock cams, especially gen 1 cams, it isnt. With cams the cj shows what its really capable of. Cams vs cams the cj will walk all over a 2018 manifold.
@Alexiscisnero8 ай бұрын
Watch my dyno video
@high-rise85058 ай бұрын
🇺🇸
@mikejautosandstuff33498 ай бұрын
Damn run 10 miles 😬hell 6 is to much lol. Your food looks terrible 😂
@mikejautosandstuff33498 ай бұрын
Ya go ROCKY!!! Lol. Looks like 👍 fun!!!
@mikejautosandstuff33498 ай бұрын
Yea those cars are pretty kool!! When you buy them 4-5 years old they are pretty cheap lol. bc people are afraid of them for repairs/maintaining them. Nevertheless you know how to work on cars, so it s a win win 😀 sounds good.
@Alexiscisnero8 ай бұрын
Yeah we got a for a really good deal, because they did not want to do the maintenance on it haha
@BrandonQuincy8 ай бұрын
Welcome back bro! A word of advice, you should put back all your old videos. Think of it as those older videos being a stepping stone and for people to see your growth from the begining until now. Never regret anything you've done in the past as they happened for a reason and cannot be erased. Embrace everything in your journey as these events that happen good or bad, make you who you are. Good to see you making content again bro!
@Alexiscisnero8 ай бұрын
Thank you man appreciate the support, I will definitely consider it!
@antoniotorres13968 ай бұрын
Nice car. What happened to your Mustang?
@Alexiscisnero8 ай бұрын
I actually sold it about a year ago
@thomaswicker60368 ай бұрын
welcome back king
@mikejautosandstuff33498 ай бұрын
😂you look good!!! Very handsome lol. I just bought a new 24 mustang gt 😆 480hp !!!!! Life can be nerve-racking at times well good to hear you’re OK and everything is fine good luck on the KZread if you decide to fully go back. 👍
@Alexiscisnero8 ай бұрын
Haha thank you brother! Yeah definitely thinking about going back in 100 percent. Hopefully we can get these views back up! I will probably be dropping another video today so be on the look out
@terrywalker9092 Жыл бұрын
What gears do you have in the rear?
@mickeycook569 Жыл бұрын
How long did it take you to do this. I wanna do this to my Ford F-150 and I need to change the firring order to match a mustang.
@legendarymotorsports7373 Жыл бұрын
Tuned ecoboost makes huge difference with twin turbo I would like to see a bolt on 5.3 run against it
@mickster026 Жыл бұрын
This channel is underrated!
@jessecollin4486 Жыл бұрын
Man, a great troll would be “dohc vtec” on the doors EXACTLY where the 99-2000 civic si wore the badges. Your not lying 🤷♂️. The 5.0 is dohc and vtec. Cheers 🍻
@jessecollin4486 Жыл бұрын
Newest coyote is what? 460hp to crank? It’s wild what they make
@Dr_Xyzt Жыл бұрын
Those sound like good numbers to me. By my calculations, that setup should make 500-517hp on an engine dyno. Your drivetrain is around 90% efficient. That's good. If anything is gonna get you, it'll be that 4.10 gearset. The hypoid is more shallow, so it's less efficient and it gets your drive shaft closer to its critical speed. A 3.31 will give you better dyno numbers. But hey, if you're drag racing, run the 4.10's, and get some wheel time with it on a road course, because you do get 4th more often which makes the transmission last longer.
@SNFU4394 Жыл бұрын
ITS NOT SAD SITTING THEIR,THAT STANG IS WAY FUCKING BADASS AND ITS WAY COOL IN THE GARAGE. YOUR RIDE IFEEL IS THE RIGHT EVERYTHING BODY STYLE,MUSTANG MOTOR ECT,SCREAMING ASS VIDEO . DUDE MY 09 V6 STANG SHE THE BEST THING I GOT NOW I KNOW THAT MUSCLE CAR VIBE,ADDICTION. THE FORD MUSTANG ITCH IM ALL IN. PEACE AND BE RACEREADY.
@skylermaness562 Жыл бұрын
Awesome build man! I love your energy hopefully you’ll get everything squared away with that rear end, just had an accident with my 14gt on the front end, putting a completely gt500 front end swap on it nevertheless.
@razerginn Жыл бұрын
Lund e85 tune, 18 inch drag radials ,2013 gt runs 12.0-12.2 all day long and im 255 lbs as the driver. And the tune is git more in it but I bracket race so my car is tuned for consistency not speed
@JuanHernandez-uk3so Жыл бұрын
Who cares about dyno numbers, what does it run at the track?
@midnight347 Жыл бұрын
@@Alexiscisnero that's moving man. Love seeing a manual gen 1 all motor doing that because so many think it isn't possible.
@Craigster11 Жыл бұрын
What’s the rest wheel setup ?
@FoxbodyJon Жыл бұрын
i love 3.73 is amazing in these cars
@boondock6055 Жыл бұрын
Rhe chevy is to heavy because its all power which is what a truck should be not a race race car
@boondock6055 Жыл бұрын
The race starts at 5:08
@JosephOjea316 Жыл бұрын
God bless you bro. He does it all. And I’m glad you’re having fun.
@strictlyvicious Жыл бұрын
The main reason is the gears on a 1:1 gear can rob top end hp
@rosco664 Жыл бұрын
Heck yea man. Sounds really good. Does your car have a 3.7 badge on the side?
@dylanwhite991 Жыл бұрын
Damn I just bought the exceedy stage 3 mach 500
@el_coyotes1978 Жыл бұрын
You have a lot more mods in my car also my car made less power than your and I ran a faster time was a 11.6 auto 6r80 FBO non ported 18manifold an lowering springs I think you need a better tire cause I ran a 30x9 and slick tire you had a street tire maybe that’s why you didn’t hook but nice car
@midnight3478 ай бұрын
You have an auto dude that automatically gives you an advantage et wise. Also you can't compare diff et from diff tracks on diff days without knowing the da and other things.
@EricSmith-mu1oe2 жыл бұрын
Ahhh mannn I was rooting for the brownie 😂
@dk5oh2 жыл бұрын
Yo for the pmas intake how did you get the intake wiring harness in it
@dk5oh Жыл бұрын
@@Alexiscisnero Nevermind installed everything and the car runs great thank you though for responding
Пікірлер
Nice
13-14 damn near the same bro lol
My setup only get 402 RWHP, im flabbergasted
Honestly poop
Will 3.73 rear end gears will work for that set up? What best rear end gears are best for street?
Nice video
Did you run the phaser cam limiters ?
that 3v @ 2:30 has twin turbos now. i know him IRL lol
Beautiful video, gives everybody the right expectations.
And please tell me you torked everything down.
Hope you did the oil pump gear and crank shaft pulley upgrade while you were in there.
Humidity and tires could affect your numbers but, honestly those arent bad numbers for a gen 1 with your mods. Radial tires always make more power on a dyno. You can loose 20 or more hp with the wrong tire on a dyno.
Hey how the Maserati doing?? You haven’t talked about it in a while. 🤔
Still have it just haven’t had any content to make with it!
Video games are a great way you can relax. And sometimes relaxing is the most productive thing you should be doing
Pain in the dick to get it set up 😂
GaryVee sent me here 🥊
Monk mode 😝 lol.
😌 promo sm
18 manifold is better for the money if youre not doing cams. If you wanna do max effort na it takes a ported cobra jet and cams peripd point blank. You can get a gen 1 to 500 rwhp or better with those mods on e with long tubes. You dont see the true benefit of the cj without cams. This is why people think its not much better than an 18 because with stock cams, especially gen 1 cams, it isnt. With cams the cj shows what its really capable of. Cams vs cams the cj will walk all over a 2018 manifold.
Watch my dyno video
🇺🇸
Damn run 10 miles 😬hell 6 is to much lol. Your food looks terrible 😂
Ya go ROCKY!!! Lol. Looks like 👍 fun!!!
Yea those cars are pretty kool!! When you buy them 4-5 years old they are pretty cheap lol. bc people are afraid of them for repairs/maintaining them. Nevertheless you know how to work on cars, so it s a win win 😀 sounds good.
Yeah we got a for a really good deal, because they did not want to do the maintenance on it haha
Welcome back bro! A word of advice, you should put back all your old videos. Think of it as those older videos being a stepping stone and for people to see your growth from the begining until now. Never regret anything you've done in the past as they happened for a reason and cannot be erased. Embrace everything in your journey as these events that happen good or bad, make you who you are. Good to see you making content again bro!
Thank you man appreciate the support, I will definitely consider it!
Nice car. What happened to your Mustang?
I actually sold it about a year ago
welcome back king
😂you look good!!! Very handsome lol. I just bought a new 24 mustang gt 😆 480hp !!!!! Life can be nerve-racking at times well good to hear you’re OK and everything is fine good luck on the KZread if you decide to fully go back. 👍
Haha thank you brother! Yeah definitely thinking about going back in 100 percent. Hopefully we can get these views back up! I will probably be dropping another video today so be on the look out
What gears do you have in the rear?
How long did it take you to do this. I wanna do this to my Ford F-150 and I need to change the firring order to match a mustang.
Tuned ecoboost makes huge difference with twin turbo I would like to see a bolt on 5.3 run against it
This channel is underrated!
Man, a great troll would be “dohc vtec” on the doors EXACTLY where the 99-2000 civic si wore the badges. Your not lying 🤷♂️. The 5.0 is dohc and vtec. Cheers 🍻
Newest coyote is what? 460hp to crank? It’s wild what they make
Those sound like good numbers to me. By my calculations, that setup should make 500-517hp on an engine dyno. Your drivetrain is around 90% efficient. That's good. If anything is gonna get you, it'll be that 4.10 gearset. The hypoid is more shallow, so it's less efficient and it gets your drive shaft closer to its critical speed. A 3.31 will give you better dyno numbers. But hey, if you're drag racing, run the 4.10's, and get some wheel time with it on a road course, because you do get 4th more often which makes the transmission last longer.
ITS NOT SAD SITTING THEIR,THAT STANG IS WAY FUCKING BADASS AND ITS WAY COOL IN THE GARAGE. YOUR RIDE IFEEL IS THE RIGHT EVERYTHING BODY STYLE,MUSTANG MOTOR ECT,SCREAMING ASS VIDEO . DUDE MY 09 V6 STANG SHE THE BEST THING I GOT NOW I KNOW THAT MUSCLE CAR VIBE,ADDICTION. THE FORD MUSTANG ITCH IM ALL IN. PEACE AND BE RACEREADY.
Awesome build man! I love your energy hopefully you’ll get everything squared away with that rear end, just had an accident with my 14gt on the front end, putting a completely gt500 front end swap on it nevertheless.
Lund e85 tune, 18 inch drag radials ,2013 gt runs 12.0-12.2 all day long and im 255 lbs as the driver. And the tune is git more in it but I bracket race so my car is tuned for consistency not speed
Who cares about dyno numbers, what does it run at the track?
@@Alexiscisnero that's moving man. Love seeing a manual gen 1 all motor doing that because so many think it isn't possible.
What’s the rest wheel setup ?
i love 3.73 is amazing in these cars
Rhe chevy is to heavy because its all power which is what a truck should be not a race race car
The race starts at 5:08
God bless you bro. He does it all. And I’m glad you’re having fun.
The main reason is the gears on a 1:1 gear can rob top end hp
Heck yea man. Sounds really good. Does your car have a 3.7 badge on the side?
Damn I just bought the exceedy stage 3 mach 500
You have a lot more mods in my car also my car made less power than your and I ran a faster time was a 11.6 auto 6r80 FBO non ported 18manifold an lowering springs I think you need a better tire cause I ran a 30x9 and slick tire you had a street tire maybe that’s why you didn’t hook but nice car
You have an auto dude that automatically gives you an advantage et wise. Also you can't compare diff et from diff tracks on diff days without knowing the da and other things.
Ahhh mannn I was rooting for the brownie 😂
Yo for the pmas intake how did you get the intake wiring harness in it
@@Alexiscisnero Nevermind installed everything and the car runs great thank you though for responding