Пікірлер

• 
  @alacpe13 сағат бұрын

  I bought the kenwood stack with the KM992 AMP(120watts) that came with the beautiful speakers LS P9300👍🏻 then about 2 weeks later I guy sold this same unit with a turning table and a small speakers, then I use phone for the table and AUX an IPAD Spotify etc.. so, maybe I don’t know much about it but..the KA3500 when using the Spotify I find a. It more clear up front, vol 3. 3.5 or 4ish with bass at +4 it’s pleasant the +6 a bit punhcy but even BASS in flat, still is good enough. The KA is only 40W, right? The KM992 stack came with CD,cassette and EQ, I can hear the slight difference. But I get the KA only has bass and treble , but yeah I like the sound and I haven’t gone too loud yet, the LS P9300 speakers can take 500Ws and hopefully I can put it to test. But so far I like this KA3500.

• 
  @RUfromthe40s2 күн бұрын

  one of the best 70´s turntables, from 79 , i have a lot of them but this was one of my favorite for home use either than the PLC-590 ,20 series also from pioneer , a personaqlized SP-1 and a SL-1000MKII also from 79, technics , off course

• 
  @RUfromthe40s2 күн бұрын

  there is a button on the back of the arm ,on the plinth that if off it doesn´t make auto-return, a lot used the SL-1300 and SL-1500 before the 1200MKII

• 
  @RUfromthe40s2 күн бұрын

  i still have it all original but the stylus is getting old and don´t know what to do , the new cartridges are totally diferent from what was used till them 90´s, in repeat knob you say ...till 6 times if on the "R" position it repeats endlessly

• 
  @christophermarvin854 күн бұрын

  That was my first stereo 😊

• 
  @vinayakrayjoshi703310 күн бұрын

  How to by

• 
  @artSFCA13 күн бұрын

  This cassette deck made a hit in the movie 9 1/2 Weeks

• 
  @jdekong394515 күн бұрын

  very nice

• 
  @bazza282515 күн бұрын

  I have the STA -850 got it at a good price and when it arrived I couldn't believe how good the condition of it was, like brand new, and has a great sound to it. very happy with my purchase.

• 
  @user-cx6gi4pj7n17 күн бұрын

  It plays so nice just hifi

• 
  @richardallgood81518 күн бұрын

  I had the exact radio. It was in my parents garage for years until my father decided to throw it out......

• 
  @basspig22 күн бұрын

  The rumble spec is what matters to me as well as the while and flutter. This is a direct drive turntable and the rumble figure is -78 decibels. Which is quite a bit better than belt driven turntables and almost as good as the fabulously expensive sl 1200 mark 2.

• 
  @LeRoySL-q5q22 күн бұрын

  I love mine! I have an Audio Technica AT-VM95ML cartridge on it and it sounds AMAZING! Other than the 1200's, this is my favorite DD turntable.

• 
  @noarara376423 күн бұрын

  I wanna this one. good deck.

• 
  @BrokebackBob24 күн бұрын

  It's about 10 watts per channel.

• 
  @gilpena959124 күн бұрын

  I have one of these. Recently looking to upgrade even though I got it in May. I want to get a RC 970 and the power amps, eventually I want to get to power amps but I'm going to stay with the 970 series. I really like it. However I need new speakers is amplifier is too nice for a pair of Sony sscs5

• 
  @bsmith950629 күн бұрын

  Mom's had one of those.

• 
  @curtisroberts503Ай бұрын

  I assume this is sold? Do you have other turntables for sale?

• 
  @holgerhansen5643Ай бұрын

  Habe das gleiche Tapedeck.

• 
  @MyJoyDepecheModeАй бұрын

  🥰👍❤👍🥰

• 
  @JamesE707Ай бұрын

  I've not yet finished working on my 710D, but I have to say it's a deck I really like. Not perfect, but it is very well made, and no silly unobtainable ICs to worry about. ;o)

• 
  @JamesE707Ай бұрын

  Hi again, Just noticed this NAD. I repaired a compleley broken NAD 6040. Both VU meters were disfunctional for a start - their dial loading springs had buckled and so were set at various points. Once the springs have gone, it's 'goodbye' to the meters. I have replaced them with a set of Chinese made VU meters; beggers can't be choosers! ;o)

• 
  @michaelc3977Ай бұрын

  Strange you said the you can only play one set of speakers at a time, with regards to the remote speakers. This is inaccurate. You cannot turn off the main speakers. You can only turn the remote speakers on and off.

• 
  @neyamiahhackettАй бұрын

  Where can i i get an old school amp like that to buy does it ve any on amazon selling

• 
  @JamesE707Ай бұрын

  I also have this deck, and have been working on it for nearly a week. What's your opinion on the RW function - does the deck easily rewind from one end of the tape to the other end?

• 
  @sayhellohelloАй бұрын

  Once it was all cleaned up with new belts it ran smoothly. The belts are sensitive. They do require the exact sizing If they are a touch too wide, tight, or loose you will have issues. Try and source out the exact correct belts.

• 
  @JamesE707Ай бұрын

  @@sayhellohello The main drive belt is 88mm diameter, by 5mm wide. It's about 0.5mm/0.55m thick. Measured, it's about 0.25% slow, which is about as good as I'll get it. The RW/FF clutch belt needs to be thick, and so the best I have sourced is 37.5mm diamter, by 1.5mm thick, but not 1.9mm as this is too tight in my opinion. The main clutch at the rear offers too little coefficient of friction, but yes, I've cleaned mine too, and added a new felt pad for the clutch. Yes, it rewinds all the way, but struggles near the end. Why? - the take-up reel table is naturally frictional, it appears to be the way it's been designed. I've opened it up and compare it with the service manual schematics.

• 
  @sayhellohelloАй бұрын

  @@JamesE707 It is hard to know what is going on without seeing the deck. It should not struggle near the end of the rewind. Ideally, you would want the tape to rewind and fast-forward normally right up until the end of the tape. What I would check is the motor. I do have to qualify myself by stressing that I am not a technician. I have been mentored by a very good professional technician. He has helped me a lot. But, the experience also showed me that I am not a professional technician - just a guy who likes to tinker around with vintage stereo gear. Good luck with it!

• 
  @JamesE707Ай бұрын

  @@sayhellohello Thanks for your replies. Well, as it happens I am a semi-retired mathematician and electronics engineer. The problem is not the motor - the motor is not at all stressed by the various loadings. The free-running current is about 162mA, and barely alters through any period during Play/RW/FF. The problem is now only slight, however what causes the slowing down of RW towards the end is *clutch slip*, and it does this for two reasons: coefficient of friction of the rear clutch is not quite high enough, and/or the frictional load offered by the rightmost reel table is quite high. I believe it's a design flaw. I have over 30 cassette decks, and it's not that uncommon that some machines begin to struggle with RW towards the end of the RW run. Sorry if I gave the impression that I was asking for help, I was merely comparing other folk's AKAI machines. Cheers. James.

• 
  @JamesE707Ай бұрын

  I meant to add that I have cleaned the rear clutch completely and added new clutch felt, and even 'sandwiched' a little silicone grease to increase slip friction slightly. Yes it works, but not as efficient as FF. Anyway, I am being a bit 'picky', no worries. :o)

• 
  @jeffbarnes8461Ай бұрын

  That’s in beautiful condition. I’d love to find an 810 in that condition. I’ve got a model 510, very similar but with a Dual 1210 turntable.

• 
  @hhvictor2462Ай бұрын

  I hear so many stories of young Gen Z and millennials - accustomed to ipods and mp3 players - inherit vintage stereo gear from their grandparents, play it, and just love the sound. Converts to analog.

• 
  @jonnywishbone4805Ай бұрын

  The silver design isn't a 'Sony' thing - Pioneer had this design style before this

• 
  @jhonwaskАй бұрын

  I have one of those. it needs new belts but it works very well. I even have the service manual for it.

• 
  @dinartefreitas3344Ай бұрын

  For me, this old tecnology its Magic, its pure Magic and The more important The sound its waaaaaaaaay better than nowadays tecnology.

• 
  @shyamakodiyaАй бұрын

  How can i buy it?

• 
  @mourningpizza_7155Ай бұрын

  I just found three of these for $30 a piece, got one for myself and two for some of my friends that also produce music

• 
  @muhammadkhairaniirfanbinra11502 ай бұрын

  What brand/type of speaker and amp you pair for this cassette player

• 
  @sabbathian2 ай бұрын

  I just got the A-8640, it is the exactly the same amp, but I guess with a newer name. And I wanted it just because of that display :)

• 
  @user-ib5ey9rg4r2 ай бұрын

  Great stereo. Love the 1970s. Bring it back.

• 
  @hopebyron82712 ай бұрын

  I've been using Monster z3 for over 20 years excellent my ears only 👂👁️ not for everyone's taste, with sigma 2000

• 
  @darrellbach67492 ай бұрын

  I have the 5220 sounds great and plan to keep it.

• 
  @doriangray78452 ай бұрын

  Das Technics 671 USD ist mechanisch unschlagbar,Klang Top mit viel Höhen und auch Bass.Meines funktioniert immer noch und bis heute keine einzige Reparatur! Das soll mal ein Tape Deck schaffen???

• 
  @ralger2 ай бұрын

  I bought an A260 brand new back in 1976 and it worked perfectly until very recently so I’ve ordered a used shop manual and small oscilloscope and signal generator and I’m going to try and fix it. It’s a great unit , hang on to it ☝️

• 
  @AudioElectronicsChicago2 ай бұрын

  I miss the Radio Shack audio gear

• 
  @padasuanagins29702 ай бұрын

  Come to karnatak bring one pes rs

• 
  @switcheffect2 ай бұрын

  i have the reel to reel of this brand and a double tape one but cant find it online

• 
  @Lars-wc4cl2 ай бұрын

  I think this is the wharfedale slimline

• 
  @silvercoins3 ай бұрын

  Very nice

• 
  @thebossman603 ай бұрын

  What would you say are the best book shelf speakers for this model?

• 
  @pathfinderdiscovery93953 ай бұрын

  I have one all works well but the fm stereo sound is statically crazy an one channel on matter what display says , but I used a cheap thin speaker wire in get an antenna or heavy gage 14 to 18 gage wires to see if that helps , an if not I just use disc player or turn table with it an or cassette deck

• 
  @rodneyhenson24323 ай бұрын

  Yes Please !!!, how did you add the LED Lights ?, Please *

• 
  @mariogambrelli3 ай бұрын

  Hi, would you know the size of the belt needed, please?

• 
  @curthudspeth19103 ай бұрын

  Beautiful Deck You Can't beat the vintage equipment

• 
  @curthudspeth19103 ай бұрын

  That looks like a real beauty sitting on top of the Akai tape deck?