Пікірлер

• 
  @danalayton15055 сағат бұрын

  We're do you get it from. I've been vto Walmart. Lows home Depot

• 
  @bubbaseeds2 күн бұрын

  Thanks for the encouragement!!

• 
  @rustymarrow3 күн бұрын

  If I use the marker on chopping boards will it be any I’ll effect after I oil it and use to cut meat?

• 
  @ScorchMarker3 күн бұрын

  No, our Markers are completely nontoxic. Just be sure to seal the wood with a waterproof sealant to protect your work and to preserve the board.

• 
  @missjewelmajesty_164 күн бұрын

  It looks good because it's glitter and glitter always loooks gewd 😤💖💖💖💫💖💖💖💖💖💖I love gliterrrrrrrrr

• 
  @ScorchMarker3 күн бұрын

  We couldn't agree more!!

• 
  @rixxaq52024 күн бұрын

  Omg wait it looks so much better than I expected

• 
  @ScorchMarker3 күн бұрын

  YESSSS!!!!

• 
  @felixrodriguez29335 күн бұрын

  What type of marker are you using

• 
  @ScorchMarker4 күн бұрын

  That's the Scorch Marker! It's a pen that reacts with heat to burn wood, paper, cardboard, denim, and so much more 😍 You can learn more about it on our website at: www.scorchmarker.com

• 
  @ashleylay40425 күн бұрын

  "didn't have brush strokes" proceeds to show us a product that shows tons of brush strokes.

• 
  @ScorchMarker5 күн бұрын

  The competition on the right had tons of brush strokes. There were some drips and streaks towards the bottom on the left (our product) where it dripped but the focal point was streak free.

• 
  @danalayton15056 күн бұрын

  Ive been to ealmart and lows and ect. R they not available in stores yet?

• 
  @ScorchMarker5 күн бұрын

  You can find our Scorch Marker in Hobby Lobby, Michaels and coming soon to Walmart.

• 
  @brendarivera47466 күн бұрын

  I like the end-result! I would give it a 10 😀

• 
  @ScorchMarker5 күн бұрын

  Yay, thank you!

• 
  @jaxxa44247 күн бұрын

  Rose gold? 😊

• 
  @user-oe9tv7hp5w7 күн бұрын

  It looks like pretty sand tho, lolz! Luv ur vids

• 
  @ScorchMarker6 күн бұрын

  It does! Thank you :-)

• 
  @spacebar97338 күн бұрын

  So pretttyyyyyy !!!

• 
  @spacebar97338 күн бұрын

  Swirl our what 😭

• 
  @lovellsinlovellsin83518 күн бұрын

  Wow I love this idea! I have glittered bulbs and hate getting glitter everywhere!

• 
  @SUGA.CUB39 күн бұрын

  These are my fav videos

• 
  @BluBlu112610 күн бұрын

  “ flavor “

• 
  @cloud.mp310 күн бұрын

  fr

• 
  @user-oe9tv7hp5w10 күн бұрын

  Don’t give up on ur videos pls! One day you’ll have many followers, and I hope it’s soon. Love the vids!

• 
  @ScorchMarker10 күн бұрын

  Thank you so much, I appreciate the love!!

• 
  @lesliesimerlink463011 күн бұрын

  I love making them. I like the purplish one

• 
  @ScorchMarker11 күн бұрын

  We do too! The purple one turned out sooo good!

• 
  @marjies.233214 күн бұрын

  It appears your gun is only an inch or so from the wood. How does one avoid scorching the wood around the design? Thank you.

• 
  @ScorchMarker12 күн бұрын

  We recommend holding your heat gun at least 6 inches from your craft. Apply the heat in a sweeping motion, moving continuously to prevent one area of the wood from getting too hot. For removing these darkened areas, we recommend simply sanding them away. You can see a tutorial for this on our TikTok here: www.tiktok.com/@scorchmarker/video/6903967873073564934?is_copy_url=1&is_from_webapp=v1

• 
  @tofinilith15 күн бұрын

  Wish this was available when I sealed vinyl on my Cirkul water bottle and had to use Mod Podge 😭 It looks and feels awful, along with the fact it’s peeling

• 
  @ScorchMarker12 күн бұрын

  Oh no I am so sorry to hear this. Can you remove the existing Vinyl and redo it?

• 
  @CatyBee15 күн бұрын

  Ok, I'm sold. I'll get some makers magic. Where do you source the mica and glitter? Do you sell those, too?

• 
  @ScorchMarker12 күн бұрын

  Awesome! We have purchased Mica powder on Amazon, the glitter has come from a variety of different places.

• 
  @will2-b15016 күн бұрын

  I’m interested in trying MM on a larger project , can it be used in a pneumatic spray gun? Also can MM be thinned with any kind of additive, to aid in the spraying process?

• 
  @ScorchMarker11 күн бұрын

  yes, but please dilute it with water, thin it a bit and clean it out afterwards with warm water and soap.

• 
  @will2-b15011 күн бұрын

  @@ScorchMarker Thank you.

• 
  @johnsonle171417 күн бұрын

  Can you wet sand and polish it for a glass finish?

• 
  @ScorchMarker11 күн бұрын

  It's a little too soft to sand and polish. After a few weeks when it's nice and hard it might work, but I would personally not recommend it

• 
  @RetiredWalkman17 күн бұрын

  How do you get that sticker

• 
  @ScorchMarker12 күн бұрын

  We download most of our stencil designs from Etsy then print them on vinyl using a Cricut machine.

• 
  @RetiredWalkman12 күн бұрын

  @@ScorchMarker ok thanks

• 
  @loristone126420 күн бұрын

  Amazing

• 
  @ScorchMarker19 күн бұрын

  Thank you!!

• 
  @mitchellloder103220 күн бұрын

  Really cool 😮

• 
  @ScorchMarker19 күн бұрын

  Thank you! We love making these.

• 
  @jadenchee387821 күн бұрын

  The way modpodge name is covered like I wouldn't recognize the liquid gold of my childhood

• 
  @ScorchMarker20 күн бұрын

  🤣🤷‍♀️

• 
  @Adventureswithkoryj21 күн бұрын

  I tried using a laser engraver, but doesn’t seem to work out for me. This scorch marker might be the number one thing for me.

• 
  @ScorchMarker20 күн бұрын

  You will love it. Laser engravers can be challenging to use. This is fun, easy and safe.

• 
  @user-oe9tv7hp5w22 күн бұрын

  Wow, I would totally buy that!

• 
  @ScorchMarker20 күн бұрын

  They are so much fun to make and smell so good once you add your favorite scent.

• 
  @lolaravioli22 күн бұрын

  You just have to make sure your oil cannot combust in the heat of the car

• 
  @user-oe9tv7hp5w22 күн бұрын

  Smart!

• 
  @ScorchMarker20 күн бұрын

  They will be safe in the car but extreme heat may cause the oils to evaporate quicker so you may need to reapply oils.

• 
  @xpumpernickelx226023 күн бұрын

  Does this work on figurines like miniatures for dnd and warhammer?

• 
  @ScorchMarker20 күн бұрын

  Yes, it will work great for them.

• 
  @user-oe9tv7hp5w23 күн бұрын

  Good luck with ur career!

• 
  @ScorchMarker20 күн бұрын

  Thank you!

• 
  @paigeelwell434823 күн бұрын

  I have a question, how do you clean makers magic from brushes? What happens if it dries on the brush? Thanks :)

• 
  @ScorchMarker20 күн бұрын

  If the brushes are still wet just warm water and a little dish soap. If it has dried to the brushes, you can use acetone. One of the best brushes I have used so far that Maker's Magic does not stick to is a silicone brush.

• 
  @SUGA.CUB323 күн бұрын

  Surprisingly i prefer the matt. It just resenates with the minimalist in me.

• 
  @ScorchMarker20 күн бұрын

  The matte is gorgeous!

• 
  @user-oe9tv7hp5w23 күн бұрын

  Yes, amazing! I hope ur channel gets popular soon 🫶🏻

• 
  @ScorchMarker23 күн бұрын

  Thank you!

• 
  @EmnidaArt23 күн бұрын

  You're supposed to cure modpodge, and great effort hiding the label.

• 
  @ScorchMarker23 күн бұрын

  That is kinda the point of our demo. Maker's Magic doesn't need 28 days to cure.

• 
  @whorlwind23 күн бұрын

  Do you know if it does well over heat transfer vinyl?

• 
  @ScorchMarker23 күн бұрын

  Yes, it does really well!

• 
  @annabellesears63624 күн бұрын

  Will you guys ever ship internationally ? :C

• 
  @ScorchMarker23 күн бұрын

  We hope to in the future but do not have an ETA for it at this time.

• 
  @GoogleUser-fh8ek24 күн бұрын

  I can use this on my car backup camera!

• 
  @ScorchMarker23 күн бұрын

  I guess you could. Never thought of using it for that.

• 
  @jerin141624 күн бұрын

  W-what is the maker's magic made of? 😳

• 
  @user-cc8in6yt8i24 күн бұрын

  ayo

• 
  @afroaesthete370124 күн бұрын

  Seek help fr

• 
  @ScorchMarker23 күн бұрын

  Sorry, a magician doesn't reveal his tricks! Our Maker's Magic recipe is top secret! We'll tell you this much though: the ingredient list is so simple and clean that we don't even have to wear masks when we make it. Water is one of the main ingredients which makes us happy. While we can't tell you the "Secret" we can tell you that ingredients like these have never been seen in the craft industry before now.

• 
  @jerin141623 күн бұрын

  @@ScorchMarker Understandable, have a nice day

• 
  @user-oe9tv7hp5w24 күн бұрын

  I luv ur chanel and hopefully one day you’ll have lots of followers. Wishing u luck

• 
  @ScorchMarker23 күн бұрын

  Thank you so much!!

• 
  @SUGA.CUB324 күн бұрын

  Oooo very nice 🖤

• 
  @ScorchMarker23 күн бұрын

  Thanks 😋

• 
  @TheeBucketMan24 күн бұрын

  “Something that wouldn’t show brush strokes” *looks like brush strokes*

• 
  @ScorchMarker23 күн бұрын

  The focal point was clear of brush strokes. There were a few marks towards the bottom where it dripped.

• 
  @PawsitivelyQuestionable24 күн бұрын

  This guy has the retired bookeeper rizz

• 
  @ScorchMarker24 күн бұрын

  Not sure if I should take that as a compliment or not LOL

• 
  @wholegrainbreab21 күн бұрын

  Oh compliment FOR SURE, dedication to your craft is pretty cool

• 
  @bilqeeskabiawu543325 күн бұрын

  Where can l get this in Nigeria

• 
  @ScorchMarker24 күн бұрын

  Unfortunately, at this time we only ship within the United States. We hope to broaden our shipping horizons in the near future.

• 
  @News49Tamilnadu25 күн бұрын

  Avail in normal stationary shop india?

• 
  @ScorchMarker24 күн бұрын

  Unfortunately, at this time we only ship within the United States. We hope to broaden our shipping horizons in the near future.

• 
  @News49Tamilnadu24 күн бұрын

  @@ScorchMarker tnx...

• 
  @jasond.valentine593125 күн бұрын

  Fuckton amount of video cuts, certainly not sketchy.

• 
  @ScorchMarker24 күн бұрын

  We are not in the business of deception; the test results are accurate my friend.

• 
  @SUGA.CUB325 күн бұрын

  Gloss makes it look like a lego piece.

• 
  @ScorchMarker25 күн бұрын

  We love how shiny the gloss comes out!

• 
  @SUGA.CUB326 күн бұрын

  I love it! The gloss side is really pretty

• 
  @ScorchMarker25 күн бұрын

  Thank you! We do too.

• 
  @pyrobaka522726 күн бұрын

  But like i can see the brush strokes..

• 
  @ScorchMarker25 күн бұрын

  There are brush strokes towards the bottom where it dripped but the focal point is clear.