Пікірлер

• 
  @chrisa94355 күн бұрын

  Can you please explain how you got 5mm when calculating the true taper? Please!

• 
  @SLINGSHOTFEVERpullshootrepeat2 күн бұрын

  The taper is 15mm x 20mm so the difference is 5mm. This means that you need to taper it by 2.5mm off each side to make it a even true taper.

• 
  @michaelcurtis81147 күн бұрын

  I got the black one ❤

• 
  @VallunoValluno-uj5nq20 күн бұрын

  Hey I live in Michigan. Do you do any shoots or anything like that? It would be cool to get a bunch of Michigan shooters together.

• 
  @SLINGSHOTFEVERpullshootrepeat15 күн бұрын

  Be sure to get on Facebook and join the Michigan Slingshot Shooters Association! There have not been any tournaments here yet, but soon!

• 
  @bradbrown167921 күн бұрын

  How can I purchase a mone Waller slingshot??

• 
  @SLINGSHOTFEVERpullshootrepeat15 күн бұрын

  You will need to find him on Facebook. RVA Catapults. You can't miss him.

• 
  @saldomino1639Ай бұрын

  True form is everything great video thanks !

• 
  @SLINGSHOTFEVERpullshootrepeat27 күн бұрын

  Thank you!

• 
  @xMrPaintxxАй бұрын

  Cant decide between this and a torque x 😂

• 
  @SLINGSHOTFEVERpullshootrepeat27 күн бұрын

  Axiom Champ is one of my favorite frames!

• 
  @MB-lb6ggАй бұрын

  Thank you for the video. But can you give me some tips for shooting over 20m? I realized that I need to change reference point to a lower position at the upper fork. But is there a way to always aim at the top corner of the fork? The point is while hunting I can not exactly tell that the target is 20m away or 25m away.

• 
  @SLINGSHOTFEVERpullshootrepeat27 күн бұрын

  Faster shooting bands will have the ammo on a flatter trajectory so you can use the same aimpoint but you do need to hold over the target most of the time for distance shooting to allow for the ammo drop. Practice at different distances helps a lot.

• 
  @caba7159Ай бұрын

  Wie kann man bei TTF den Leuchtpunkt sehen?

• 
  @SLINGSHOTFEVERpullshootrepeat27 күн бұрын

  It is above the fork right above the aiming dimple.

• 
  @caba715926 күн бұрын

  @@SLINGSHOTFEVERpullshootrepeat Danke 🙏🏻

• 
  @kaisermojica4216Ай бұрын

  Just the video I was looking for. purchased similar cards, wanted to if the hooks would work as well as the grim workshop cards. My only issue with the ones I got from Amazon are they appear to be larger cards and don’t fit in an altoids tin or a wallet.

• 
  @SLINGSHOTFEVERpullshootrepeat27 күн бұрын

  These cats were from wish and are slightly thicker but worked well!

• 
  @yashrocky14362 ай бұрын

  Nice ❤

• 
  @SLINGSHOTFEVERpullshootrepeat2 ай бұрын

  Thank you, I'm glad you liked it!

• 
  @eatyourvegetables23072 ай бұрын

  Will the scout lt2 scales work on the older scout ?

• 
  @SLINGSHOTFEVERpullshootrepeat2 ай бұрын

  Yes, they work on either one.

• 
  @jayedannholmes63673 ай бұрын

  Simple shot black is made in china

• 
  @SLINGSHOTFEVERpullshootrepeat3 ай бұрын

  Almost all of slingshot latex is made in China. I believe there is one factory in India as well. You can't buy American Made slingshot latex because none is made here in the USA.

• 
  @jayedannholmes63673 ай бұрын

  @@SLINGSHOTFEVERpullshootrepeat Theraband is made in the USA

• 
  @SLINGSHOTFEVERpullshootrepeat23 күн бұрын

  Yes,but it is also not slingshot latex. TBG is made for resistance and not a fast retraction rate like slingshot latex.

• 
  @Outdoordan113 ай бұрын

  I builded my self a target and I am 11 years old

• 
  @SLINGSHOTFEVERpullshootrepeat3 ай бұрын

  Awesome, I have a wooden outdoor one as well. Keep at it and you'll be a sniper with a slingshot! I look forward to seeing you at events sometime in the future.

• 
  @The96civicrider3 ай бұрын

  Purchased the scout x not long ago as my first slingshot, now I'm looking for something smaller so the lt2 might be what I'm looking for. I also like how the tl blade patina came out. I own 2 lt wright knives and love them.

• 
  @SLINGSHOTFEVERpullshootrepeat3 ай бұрын

  The Scout LT2 is like a scaled down Scout X. It is a great frame imo. Thanks, LT Wright have some of the best blades in the business. Some of the coolest people too!

• 
  @CGSLNGZ3 ай бұрын

  Nice Review! Cant wait to get one! PS that knife is sweet!!! Dont own any but LT has sweet knives

• 
  @SLINGSHOTFEVERpullshootrepeat3 ай бұрын

  Thanks man, I recommend both the knife and the slingshot!

• 
  @Hoggy19633 ай бұрын

  Awesome. Great review. The LT2 is a SWEET little frame

• 
  @SLINGSHOTFEVERpullshootrepeat3 ай бұрын

  Sure is!

• 
  @fishvehiclefood16163 ай бұрын

  Head light brand name?

• 
  @SLINGSHOTFEVERpullshootrepeat3 ай бұрын

  Sorry, I can't remember, it didn't last long though, I would advise against that one.

• 
  @Nobody04243 ай бұрын

  The Sights Are Cool But It's Hitting The Bands Whenever I Shot It, So I Decided To Just Remove It, Because My Bands Broken After A Few Shots Near The Sights.

• 
  @SLINGSHOTFEVERpullshootrepeat3 ай бұрын

  The sights are above the band attachment so the sights should never come into contact with your bands. More than likely you experienced what is called a fork hit. If the latex is between the ball and the slingshot frame, it can be pinched and cut by this impact. A key sign is holes in the latex.

• 
  @tonyneale65873 ай бұрын

  Thankyou so. much for your help.you are exactly right, correctly discovering my error. I am so pleased thanks again Tony NZ

• 
  @SLINGSHOTFEVERpullshootrepeat3 ай бұрын

  You are very welcome! I am so glad this video helped you, Tony! Shoot straight my friend!

• 
  @wrpweb40914 ай бұрын

  Прикольно! Но такая "8" стоит дороже, чем такая рогатка))

• 
  @SLINGSHOTFEVERpullshootrepeat3 ай бұрын

  For us they are not more expensive! They are much cheaper than a manufactured slingshot.

• 
  @billknepp19654 ай бұрын

  short answer.. as provided no... every individual shoots differently...

• 
  @SLINGSHOTFEVERpullshootrepeat4 ай бұрын

  You are 100% incorrect, they work great, but for them to work great, you need to do things correctly such as form, release, and anchor point.

• 
  @randywilson68694 ай бұрын

  For a right hand person with hand do u hold the beenyflip in

• 
  @SLINGSHOTFEVERpullshootrepeat4 ай бұрын

  It will depend on which eye is dominant. You want to draw to the dominant eye otherwise you will be of target. You can hold the slingshot in either hand.

• 
  @benderoo64334 ай бұрын

  He’s a genius

• 
  @SLINGSHOTFEVERpullshootrepeat4 ай бұрын

  Haha, thanks.

• 
  @rodzillagene85254 ай бұрын

  Super cool and helpful video 🤘

• 
  @SLINGSHOTFEVERpullshootrepeat4 ай бұрын

  Thank you, glad it was helpful for you.

• 
  @WeGankAndTheGang5 ай бұрын

  What band would you use for 8mm and 3/8 steel?

• 
  @SLINGSHOTFEVERpullshootrepeat5 ай бұрын

  You will more than likely need two different bands due to the weight difference in the ammo. I like a taper of 15mm-20mm. For the 3/8" I use .7mm thick latex. For the 5/16" or 8mm ammo I use .6mm or .5mm depending on the season.

• 
  @WeGankAndTheGang4 ай бұрын

  @@SLINGSHOTFEVERpullshootrepeat Thank you, very helpful. I will try it now😆

• 
  @MrJames196766 ай бұрын

  Excellent video mate. Just one question, do you set the bands on the pouch facing in, or facing out? Or does it really matter at all? James UK. 😎👍

• 
  @SLINGSHOTFEVERpullshootrepeat5 ай бұрын

  With the supplied bands, they are made to be shot with the fuzzy grey side in toward the ammo but you can shoot them with the black smooth side in instead. The risk that way is the tag ends of the latex where they are tied to the pouch can hit the ammo which can result in accuracy interference.

• 
  @edwardgomez36336 ай бұрын

  Where do you get them?

• 
  @SLINGSHOTFEVERpullshootrepeat6 ай бұрын

  You need to order them from GZK.

• 
  @r123brown6 ай бұрын

  Tks for sharing SF.

• 
  @SLINGSHOTFEVERpullshootrepeat6 ай бұрын

  You're welcome.

• 
  @XDpenguin86 ай бұрын

  I have hunted with 1/4 steel Birds are easy to kill But squirrels are so hard😂

• 
  @SLINGSHOTFEVERpullshootrepeat6 ай бұрын

  Yep, not the best hunting ammo but it can be done.

• 
  @ufonaughts88146 ай бұрын

  Need a camera tripod!! Camera shake making me disy!!! One one target! One on you! Then edit!!! 👍 be a good video!!!! What do you think of the Saunders pro X for dart shooting!!! Hands are well protected!!! What you think of them?????

• 
  @SLINGSHOTFEVERpullshootrepeat6 ай бұрын

  It's too difficult for hunting to use the tripod. I'm not a fan of the Saunders Pro X. I do not like the fork tips.

• 
  @FramelessSniper6 ай бұрын

  Yep tubes are difficoult. I use only that 😅😅😅

• 
  @SLINGSHOTFEVERpullshootrepeat6 ай бұрын

  They last so long, that's the nice part.

• 
  @user-yn4kw7lu5q6 ай бұрын

  Cool

• 
  @SLINGSHOTFEVERpullshootrepeat6 ай бұрын

  Thanks!

• 
  @roberttrungel-nagy82837 ай бұрын

  Dear Sir! Could I have a private question in a message?

• 
  @SLINGSHOTFEVERpullshootrepeat6 ай бұрын

  I don't share my email here so feel free to ask anything you need to here in the comments.

• 
  @kennethpaschall68117 ай бұрын

  At 200 grains a 2 inch long head is way more than enough when hitting soft tissue

• 
  @SLINGSHOTFEVERpullshootrepeat7 ай бұрын

  Oh yeah, there is plenty of energy there.

• 
  @kennethpaschall68117 ай бұрын

  @@SLINGSHOTFEVERpullshootrepeat just imagine if the tip was completely made of tungsten and also on Amazon they have them but the 10 pack is cheaper than the full set I'm just wondering if they still way 200 grain

• 
  @SLINGSHOTFEVERpullshootrepeat6 ай бұрын

  I'm not certain what the new ones weigh.

• 
  @BirdWhisperer467 ай бұрын

  Which one would you rather use when the SHTF?

• 
  @SLINGSHOTFEVERpullshootrepeat7 ай бұрын

  It would just depend on the target...

• 
  @naafiabdulnaafi74767 ай бұрын

  Which ammo cay make pigeons fall with body short...? So that It cannot fly away and get injured...as sometimes we can not accurately aim wings and head neck..

• 
  @naafiabdulnaafi74767 ай бұрын

  @Renzo0066 thankbu so much for your rply

• 
  @naafiabdulnaafi74767 ай бұрын

  @Renzo0066 and what band setup and how much width( in mm) and thinkness

• 
  @SLINGSHOTFEVERpullshootrepeat7 ай бұрын

  I would use 3/8" Steel Ammo or 7/16" Steel Ammo.

• 
  @sf29987 ай бұрын

  is enzo more comfortable to hold & shoot compare to uniphoxx??

• 
  @SLINGSHOTFEVERpullshootrepeat7 ай бұрын

  I didn't have an Enzo to compare it to, sorry.

• 
  @Kaizersoze197 ай бұрын

  Ty for sharing your knowledge! U taught me a lot! I got a question can u help me? Having a draw length of 73 cm and 18 cm of active band length (4,5 elongation factor) not counting 2,5 cm for frame and pouch tie, is a 170 mm taper useless (too short) for me?

• 
  @SLINGSHOTFEVERpullshootrepeat7 ай бұрын

  For a 4.5x's elongation it would be too short but it would be closer to a 5x's elongation which would be fine.

• 
  @Kaizersoze197 ай бұрын

  @@SLINGSHOTFEVERpullshootrepeat ty very much! 💪🏼💪🏼 To be well covered i’ve bought five different jigs (on sale), 170 mm (19-11 22-12) 200 mm (20-12) 230 mm (23-13 19-11) Hope they will work great for me.

• 
  @SLINGSHOTFEVERpullshootrepeat6 ай бұрын

  Have fun experimenting!

• 
  @JohnVentarino-ey5ln7 ай бұрын

  With them adjustable sights if you want to shoot farther do you have to extend the sight out farther or push it in closer to the frame when shooting farther distances.

• 
  @SLINGSHOTFEVERpullshootrepeat7 ай бұрын

  You will need to lower the sight to account for the ammo's drop over distance.

• 
  @ericcook84228 ай бұрын

  Love the magnet for the can idea.

• 
  @SLINGSHOTFEVERpullshootrepeat8 ай бұрын

  Thanks, I admit it doesn't always work! If you get a strong one out would be better.

• 
  @sf29988 ай бұрын

  great review 😃

• 
  @SLINGSHOTFEVERpullshootrepeat8 ай бұрын

  Thank you so much.

• 
  @sf29988 ай бұрын

  whats the diameter of the bottom of the handle, across the lanyard hole? I am referring to the widest area of the handle at the bottom?

• 
  @threestarsandasling8 ай бұрын

  Late to the party but great video brother! I love the tiny rubber ammo targets! Cheers Adam!

• 
  @SLINGSHOTFEVERpullshootrepeat8 ай бұрын

  Better late than never there! Thanks brother!

• 
  @Northstar-Media10 ай бұрын

  Hey, I'm fairly new to slingshot & I've just got uni phox I have small hands long fingers. I cannot get a full pinky in the hole (if that makes sense) it feels odd in my hand as thoughi want to twist the handle it feels a little strange as though there's not enough handle length. I'm going to persevere with it but could you recommend a Wasp frame for next time. 👍 PS im shooting ott with finger & thumb brace .

• 
  @SLINGSHOTFEVERpullshootrepeat10 ай бұрын

  Sorry, it's the only Wasp frame I have. The shipping is just so high to get them here in the USA.

• 
  @billcarpenter561510 ай бұрын

  Thanks for this, ordered a slingshot with a site like that off Amazon today, seems like a great tool for getting your form correct.

• 
  @SLINGSHOTFEVERpullshootrepeat10 ай бұрын

  You are very welcome! If they are quality, they work well. Have fun!

• 
  @well542310 ай бұрын

  This was the best video on sights, period. Subscribed and many thanks!

• 
  @SLINGSHOTFEVERpullshootrepeat10 ай бұрын

  Thank you so much. I'm glad it helped you understand sights better.

• 
  @JDFly-bn7ys11 ай бұрын

  Bad schuter 😏

• 
  @SLINGSHOTFEVERpullshootrepeat11 ай бұрын

  Thanks

• 
  @caseya.490211 ай бұрын

  Great video! What taper would you recommend for 5/16 with .5 simpleshot?

• 
  @SLINGSHOTFEVERpullshootrepeat11 ай бұрын

  I use a 12mm-15mm for the 5/16".

• 
  @caseya.490211 ай бұрын

  @@SLINGSHOTFEVERpullshootrepeat sweet thanks! I was probably over doin it with 20mm-10mm.

• 
  @jamespayne475911 ай бұрын

  What is the name of your speed measuring machine ??? Jim Payne, Charlotte, NC.

• 
  @SLINGSHOTFEVERpullshootrepeat11 ай бұрын

  It is a ProChrono chronograph.

• 
  @letsai386811 ай бұрын

  What size is that ball bearing?

• 
  @SLINGSHOTFEVERpullshootrepeat11 ай бұрын

  They use a 3/8" bearing.

• 
  @turtlewolfpack606111 ай бұрын

  I know this is an old video but just maybe you can answer a question for a month old newbie slingshot shooter, what is the inner diameter of the occularis holes?

• 
  @SLINGSHOTFEVERpullshootrepeat11 ай бұрын

  The Ocularis Plug holes in the frame are 19mm.

• 
  @turtlewolfpack606111 ай бұрын

  @@SLINGSHOTFEVERpullshootrepeat awesome thanks!

• 
  @SLINGSHOTFEVERpullshootrepeat11 ай бұрын

  No worries, you are very welcome.