Пікірлер

• 
  @davidrockefeller20075 күн бұрын

  The cost is worse than those numbers because that money spent is no longer making money in the stock market

• 
  @jbbbda15 күн бұрын

  Bought a 2021 and Eastern was horrible to deal with on quality/warranty issues. Horrible. They use butyl tape for bedding deck hardware, set up a dangerous propane system that had to be removed, and too many other things to list. Do not buy new, get one that has been used and proven. Love my boat, have full disdain for Eastern!

• 
  @comancheflyer490315 күн бұрын

  Headroom?

• 
  @groenguy17 күн бұрын

  great option please provide access to the mentioned excel sheet thanks

• 
  @jonathansantillan2539Ай бұрын

  I am interested in your old carburetor if you still have it laying around?

• 
  @dennismclaughlin8840Ай бұрын

  I own an Antares 11 and I have some plusses and minuses to report. It is very easy to use and the joystick function makes docking a breeze. It handles very well in calm and rough seas - had it out in 6' swell and it was fine. Great speed with twin merc 300's. Great vessel for fun on Narragansett Bay environs. That said, there are some real flaws. First and most inmportantly, quality is not like the old Beneteaus. The company moved production to Poland and the quality is shaky. Leaky overhead, misaligned cabinets, A/C works great in cooler weather but completely fails to keep up with hotter temps (we're in RI which isn't exactly 'hot weather'). Even the toilet seat was dielivered in the wrong size. One design flaw is that the helm is very hot in warm weather - zero wind flow and no windows to allow wind flow. BTW - it is not exactly cheap either. Also, Beneteau completely eliminated ANY direct contact and all complaints/concerns must go through the dealer. It is impossible to complain about a bad dealer to Beneteau HQ

• 
  @ijoseluisАй бұрын

  Not an outstanding boat for that money.

• 
  @Saphiracruising2 ай бұрын

  Hi! Great video! I tried to find the excel in your web page but could not find it. Can you please send it to me? Best regards Magnus

• 
  @stevenbailey98312 ай бұрын

  Although you sound like Ben Stein when doing your over dubs, the comparisons were awesome!!

• 
  @roginutah2 ай бұрын

  Don't need 12 months each of dock/mooring AND winter storage, do you? And if you're going to TOW it, do you need either? And haul/launch fees for a trailered boat?

• 
  @tedhansen38462 ай бұрын

  I was expecting to see a rubber raft or kayak😊

• 
  @CruisingCalypso2 ай бұрын

  It’s almost getting to that point. New boats prices in the 30 40 foot range are just crazy!

• 
  @dw70702 ай бұрын

  It’s what I’m looking for,unfortunately JFB has things all messed up right now I’ll wait till next year but I’m looking now

• 
  @vihreelinja47432 ай бұрын

  this does not boost hp. Adding more fuel will just make the mixture rich so it might have a bit more torque but it will loose peak hp. To get more hp you need to add more fuel and air.

• 
  @ericschrader89672 ай бұрын

  Where can I order this fixture

• 
  @johnqdoe3 ай бұрын

  No way. Projecting. Bayliner or Meridian sport trawler/cruiser with diesels smashes these boats in every category at this price point. Edit: Good effort though, good effort.

• 
  @nno6aew3 ай бұрын

  Great Channel I enjoy all the content! I think I remember your boat one night in Cuttyhunk, we had a crazy storm come through. Hope your swim platform was okay. I’ll never forget that lighting and rain.

• 
  @CruisingCalypso2 ай бұрын

  Thank you! I appreciate the feedback. Yes my swim platform too $4,000 to repair... ouch! I need up taking off the dingy arms that caused the damage and replaced them with a different system.

• 
  @eddieerskine20133 ай бұрын

  Very nice clean engines!

• 
  @CruisingCalypso2 ай бұрын

  Thnaks. I find that keeping the engines clean is the best way to spot any leaks.

• 
  @jamesfairhurst85253 ай бұрын

  I have just bought a display 8hp Parsun motor. I understand it is a Mercury/Tohatsu clone. I plan on doing this exact same conversion, using an inexpensive generic 9.8hp carb. Can you please elaborate on what was misaligned so that the choke was jammed?

• 
  @vickz29853 күн бұрын

  Hi man I just wanted to tell you that I made the same mistake a few yeard ago by getting a parsun, it is cheap chinese crap and it will only be problems for you I would just recommend to sell it now when it has more value and get either a new or second hand engine of companies which are more established in the boat industry. I strongly recommend any engine from Yamaha or Honda but anything other like suzuki and or even murcury ( tohatsu ) will be better than a parsun : ) let me know how you work it out and if you have any more questions please ask me !

• 
  @stevewilliams47773 ай бұрын

  Do you have any photos of the underwater light's? Curious if they are factory or if they installed new ones

• 
  @Jeff-mv4yy3 ай бұрын

  The performance shown is I believe for v drives . What improvement does the stern drive make ?

• 
  @CruisingCalypso2 ай бұрын

  Great question! Stern drives definitely would see a speed improvement as much as 6-8 knots and a corresponding reduction in fuel burn. Stern drive v. v-drive is always a trade off of performance v. maneuverability and maintenance with the latter being easier and slower.

• 
  @randyscott33864 ай бұрын

  Climate change , buy the pilothouse cruiser with h.v.a.c. . and solar panels up there on the roof . You'll be glad you did .

• 
  @sejehp14 ай бұрын

  @1:08 Please refrain from introducing additional noise after muting the recording due to wind interference next time. It can be quite bothersome.

• 
  @Auddictive4 ай бұрын

  I guess you also need the exhaust port round part.

• 
  @prophetseven7284 ай бұрын

  Did they make older boots built stronger and better? Like how cars are now. New ones suck!

• 
  @ront32724 ай бұрын

  That’s because the boating market is too high

• 
  @user-dm9tz4dd7s4 ай бұрын

  this is 2 years old how could this help me buy boat now BS

• 
  @surreallife7774 ай бұрын

  We’re looking for a yacht used for under $100,000 live board with a sliding rear patio style window entrance. The more like a condo it is the better. Two bedroom two bathroom. Can you recommend some models in that price range?

• 
  @surreallife7774 ай бұрын

  We’re looking for a yacht used for under $100,000 live board with a sliding rear patio style window entrance. The more like a condo it is the better. Two bedroom two bathroom. Can you recommend some models in that price range?

• 
  @RuthBrown-tm2gt5 ай бұрын

  What an absolute pig. At 8.5 knots, consumption is 3.78 litres per mile. Ridiculous.

• 
  @guenthermichaels53035 ай бұрын

  There are no " State Rooms" on this boat . There is a forward berth, barely a cabin.

• 
  @TInax-oo6mv5 ай бұрын

  If it's got a motor, a propeller, or a VA whinah,,you're gonna have problems with it.

• 
  @user-dm8my8jw8m5 ай бұрын

  italy limit boat , stupid frances

• 
  @stephendove28506 ай бұрын

  This video is so bad, it is almost comical. 😂

• 
  @MuzixMaker7 ай бұрын

  1:32. That didn’t age well.

• 
  @markeaston73537 ай бұрын

  Thanks for this. It's the first time that I've seen the motor being held instead of mounted to a frame while it was run. I think you have just saved me a lot of time and money.

• 
  @markdimaio83968 ай бұрын

  Nice boat. I think I would prefer that over xxxxtug brands

• 
  @CruisingCalypso8 ай бұрын

  It is very nice with good craftsmanship. You don't see many like it in the states but they are sold here. A similar brand is Sargo.

• 
  @Killmonize8 ай бұрын

  Love to have that exel sheet

• 
  @CruisingCalypso8 ай бұрын

  Happy to send it to you. Send me an e mail on our website, Cruisingcalypso .com and I will send it to you.

• 
  @Killmonize8 ай бұрын

  Will do thank ypu.

• 
  @ASMR_Lighting8 ай бұрын

  "Pass me the wrench...no, not that wrench" As a female owner of a vessel equipped with a CAT3126, I can appreciate that exchange! Learning a lot from your videos. Thanks!

• 
  @georgelandau75918 ай бұрын

  i think you used wrong bleeder .should be the one above the filter been the highest point . NEVER use a wrench

• 
  @gergc48718 ай бұрын

  How much?

• 
  @andymartinez7678 ай бұрын

  If your in Australia not much. Everything is so overpriced here

• 
  @yolandalindsay83689 ай бұрын

  "I Did. Thanks".

• 
  @glenpenrose18349 ай бұрын

  My 1967 27ft fibreglass/Hemp composite canoe, with cracked hull and broken seat, has better features than this rust bucket! 😡 Like, when the weather starts getting rough, and my tiny ship gets tossed, if it wasn’t for the courage of the fearless crew, (me) the Minnow would be lost! The Minnow would be lost!

• 
  @CruisingCalypso9 ай бұрын

  Thanks for your comment. Id love to see that canoe with 6-8 people aboard and try to sleep 4. Sounds amazing!

• 
  @omieyouknowme9 ай бұрын

  9.9 is completely different bigger block more weight. 8-9.8 are proven motors for tohatsu dont break if it isnt broke.

• 
  @CruisingCalypso9 ай бұрын

  Yes, the 9.9 is a different motor than the 8-9.8. Upping t6he horsepower of the 8 to 9.8 is an easy inexpensive way to increase the power and make the engine more useful.

• 
  @omieyouknowme9 ай бұрын

  @@CruisingCalypso lots of variables there. If being used as a kicker no noticeable gains. If using on a dingy then perhaps but is it worth it? Unless the carb was gummed beyond cleaning perhaps but in small hp applications meh the bigger 9.9 will have better torque. 4-6hp single cylinder though is generally a good upgrade

• 
  @outofchips10 ай бұрын

  I'll take it.

• 
  @dfarrar2310 ай бұрын

  This is a great video. Thank you for this information into my early retirement for my Great Loop adventure and travel and life out my life on the water.

• 
  @Dewsdale10 ай бұрын

  Hi, very informative forna beginner like me. One question, did you use marine oil

• 
  @CruisingCalypso10 ай бұрын

  Hi, Thanks for your comment. The oil is not specific to marine use just use the recommended weight and viscosity.

• 
  @johnschieffelin322610 ай бұрын

  Thanks for the tour. A lot to like in this boat. I think view forward from the aft helm station would be adequate, but it's hard to know until you try it out. A real benefit would be docking -- the helmsman can see both transom corners when docking stern-to. And as you said, the helmsman is able to converse easily with guests sitting forward of the helm. I see so many Hinckley picnics boats running by my place with a lonely helmsman in the cabin and all the other passengers having fun in the cockpit aft -- very unsatisfactory. I think the covered area between the salon and aft cockpit in the Riviera would be delightful -- shaded but open air, very comfortable. The three cabin layout is fine, but I wonder if there is a two-cabin layout with a grand midship cabin available? That would be my choice. The only drawback to the Riviera is the need for isinglass for protection on the upper deck -- that stuff is horrible to look through.

• 
  @Inpreesme10 ай бұрын

  that background noise 🤯

• 
  @petwillcox393410 ай бұрын

  😥 "PromoSM"