Пікірлер

• 
  @Citizendefenseindustry3 күн бұрын

  brother can i make a suggestion? get yourself a lil 4v skil drill. they are like 30 bucks.... your throwing around that overly huge & bulky heavy drill. Every time i watch you slip off a piece of hardware i cringe lol

• 
  @pibitchicaАй бұрын

  FUSES??????????

• 
  @armandolopez8983Ай бұрын

  Simple but I always forget. GREAT reminder...THX

• 
  @american3148Ай бұрын

  Watching with the sound off

• 
  @edentucker1326Ай бұрын

  so draining together means they also charge together. If i hook up solar to one battery it will charge the both except take longer?

• 
  @leatijoseph8283 ай бұрын

  sounds great now check the Edge of Tomorrow intro scene then you will return the pb-16ultra because of the annoying sound from the port many people have experienced this

• 
  @jessemichalies3 ай бұрын

  Lol, why would I return a sub for one scene in a movie when it absolutely kicks ass. You'll get port noise with any ported sub.

• 
  @leatijoseph8283 ай бұрын

  @@jessemichalies kzread.info/dash/bejne/p5mt07WFf9DHlaw.htmlsi=2cBNxqF1q7saL2i5

• 
  @leatijoseph8283 ай бұрын

  @@jessemichalies pb 16 doesn't give ultra low bass properly, so there is a port chuffing problem, edge of tomorrow bass goes down to 10hz, but p16 ultra doesn't go below 20hz also i use Rythmik Fv15hp there is twice the difference between 16ultra but i didn't have any port problem Rythmik is a whole other level

• 
  @calrc1233 ай бұрын

  My straps came to short. Now I have to find some longer straps

• 
  @MrPlutoz3 ай бұрын

  I thought women say "size matters" 😂😂😂😂

• 
  @G__Mason3 ай бұрын

  I’m looking at buying an ultimate now but wanna order the fox body for it to match my Losi DB Pro lol

• 
  @jessemichalies3 ай бұрын

  The fox body is the best

• 
  @rileylehoe22324 ай бұрын

  Love the colors badass

• 
  @Facts-R-Real5 ай бұрын

  That orange isn’t bad but it’s not even close to what you were looking for. I completely agree. But I will say it’s cool orange it does at least match the orange rear piece and your leads.

• 
  @vorvudthi10075 ай бұрын

  HI very helpful video ..but aren't the traxxas LEDs rated 16v for each front and rear? so your step down is outputing 16v to both so are you just essentially sending 8v to each LED which means their not at 100% brightness capacity?

• 
  @jessemichalies5 ай бұрын

  No they're both get 16 volts

• 
  @jeffkennedy52575 ай бұрын

  What are the measurements for the box. I was thinking of doing the same thing with my set up. Adding a console in the rear to go with the 10’s under my back seat. You have the specs for the box build?

• 
  @jessemichalies5 ай бұрын

  I really was just trying to make it as big as possible in every dimension other then height

• 
  @jeffkennedy52575 ай бұрын

  You have the measurements by chance or are you able to build another one?

• 
  @jessemichalies5 ай бұрын

  No lol that box was a pain to build.

• 
  @jeffkennedy52575 ай бұрын

  I could imagine, especially having to make sure the front console lids would open and close. I was thinking of a 16x15x 18 tall but doing as you did with the sides where it clears the front driver and passenger seats in the back for more space in the box. Will try some options out and see what I can do. But nice box How did that box blend with the box under your rear seat? And frequently interference ? Did either box drown or over power the other boxes bass or did it blend nicely?

• 
  @jessemichalies5 ай бұрын

  @jeffkennedy5257 I don't hear any issues myself with the 2 boxes sense they are both sealed. The box with 3 is a lot louder than the 2 under the seat. I put the angles in the back top of the box so a person could still sit there and wrap their legs around it. If you find me on Facebook I can send you more pictures I've got of the build. I haven't watched this video in a while so I'm not sure what I put in the video.

• 
  @user-ln6hh3cu6y5 ай бұрын

  Where are the bodies, Garth?

• 
  @qwik666 ай бұрын

  Great video, thank you! Question…what ratcheting driver is that you’re using? I’ve tried looking for a slim one like that but haven’t had any luck.

• 
  @jessemichalies6 ай бұрын

  They are snapon drivers

• 
  @qwik666 ай бұрын

  Thanks! How does it handle with the weight of all the Vitavon additions?

• 
  @chasenelson81376 ай бұрын

  Cant you adjust the settings on your phone?

• 
  @All-rc8046 ай бұрын

  Would the lights work on 7.4v?

• 
  @jessemichalies6 ай бұрын

  Possibly, but they would be nearly as bright

• 
  @nathanielflatt41296 ай бұрын

  So question how has your vuatvon servo horn held up ive had 2gpm servo horns on my perfect pass and the servo has destroyed the teeth in both servo horn

• 
  @garrylewis23207 ай бұрын

  Aside from an interesting and informative video, how did you get your XRT so clean outside and inside? When I disassemble mine, it’s full of dust and grit. (Rock quarry bashing). I just subscribed to your channel. Do you have a video on how to clean it up so well?

• 
  @jessemichalies7 ай бұрын

  It was still brand new and I hDnt bashed it yet

• 
  @garrylewis23207 ай бұрын

  @@jessemichalies Ok that explains it. Still a great video!

• 
  @craigmac15167 ай бұрын

  use a small balloon it will stretch over and then tie the end around the wire with zip tie . using a light color like yellow or pink you should be able to see everything though the balloon itself.

• 
  @dougstevens22927 ай бұрын

  Where are the bodies!

• 
  @Shellzwick7 ай бұрын

  Does the truck feel much heavier ? My bulkhead broke exactly where you said people usually break it .

• 
  @jessemichalies7 ай бұрын

  Yes, after all the vitavon upgrades, it is definitely heavier

• 
  @Shellzwick7 ай бұрын

  @@jessemichalies I think imma save the extra weight for tire options .

• 
  @azbrown8218 ай бұрын

  So you must have sold a kidney for those parts from Vitavon they're ridiculously expensive

• 
  @jessemichalies7 ай бұрын

  They are definitely proud of them

• 
  @SilverC8andDroppedC108 ай бұрын

  Looks nice. OPT7 makes some nice LEDs. Installed them in my C8. Love them.

• 
  @jessemichalies8 ай бұрын

  I'm pretty impressed so far

• 
  @zacksmith87639 ай бұрын

  Your servo saver is probably slipping.

• 
  @jessemichalies9 ай бұрын

  It was i had to tighten it up

• 
  @TheRoggan1239 ай бұрын

  Just finished upgrade of my XRT with Max6, Perfect Pass, HD saver spring (+ small spacer) and Spectrum RX/DX5Pro. Its a SIGNIFICANT boost in the speed and performance of the steering!!

• 
  @Xbot4Life6 ай бұрын

  Hope its a MAx 6 G2 with the same power as a Max 5 instead of the old Max 6s

• 
  @brucebaker03162 ай бұрын

  Max 6 g2 does 8.4v...

• 
  @BuffaloSoldier-tb9dn9 ай бұрын

  How do you put on the straps

• 
  @BuffaloSoldier-tb9dn9 ай бұрын

  Why don't you have full steering after the upgrade?

• 
  @jessemichalies9 ай бұрын

  I had to tighten up the servo saver some more

• 
  @BuffaloSoldier-tb9dn9 ай бұрын

  @@jessemichalies how do you tighten the stock servo saver?

• 
  @jessemichalies9 ай бұрын

  You tighten the knurled ring down onto the spring more

• 
  @s1lentcalib3r9 ай бұрын

  Nice shelf princess upgrading every part without it even touching dirt.

• 
  @pfunk729 ай бұрын

  😂😂😂

• 
  @D.hobbyist10 ай бұрын

  they made this rc so easy to fix best build ever from traxxas😊

• 
  @uninkspillz10 ай бұрын

  i see them RCs back there...

• 
  @loudspeakertestsmorebyaida380411 ай бұрын

  Do you still own the PB16 Ultra? That’s a lot of shaking for a home theater subwoofer? Are they still going strong?

• 
  @jessemichalies11 ай бұрын

  Yes, I do, and it's still going strong

• 
  @flaprepper11 ай бұрын

  Awesome Video - thanks for sharing!!!

• 
  @jonathanryan291511 ай бұрын

  Just like a Tesla

• 
  @jasonbrickman806511 ай бұрын

  Quite the explosion

• 
  @jessemichalies11 ай бұрын

  Yes it was lol l. The second one not so much

• 
  @lilredrc471911 ай бұрын

  KILL IT WITH FIRE!!! 😂😂

• 
  @jessemichalies11 ай бұрын

  Lol

• 
  @landen385911 ай бұрын

  Will the quad blow up like that for to long?

• 
  @southernknight998311 ай бұрын

  Cool! I came across two batteries like this on a used camper that I am getting and immediately saw issues with how they were wired. I did not see a current going through either battery as it was and two wires were disconnected. While I know how electricity works and flows, it looked like they were supposed to be linked as a series, but wanted to be sure I was linking them back together correctly. As soon as I saw how you connected them, it made complete sense. A no brainer at that point. Someone had delinked the two batteries from each other for what ever reason. Now I can handle the rest and likely need two new batteries. No sweat. Thanks!

• 
  @rmakin783211 ай бұрын

  Can you send part numbers for all of these things you used the servo and the bracket please

• 
  @jessemichalies11 ай бұрын

  You can find the perfect pass monster servo on Amazon. Vitavon has the bracket on there website

• 
  @basementracer762211 ай бұрын

  Hey man, that is a great servo, I run mine at 8.5v on a Castle B.E.C. I did want to mention to you that in your video you didn't show the setup of your radio. Meaning, the servo that comes with the XRT is a mechanical servo, the perfect pass is a Brushless Digital Servo. You may need to tell your TX that the servo is digital as the default is always mechanical. Once I sussed that out on my Futaba system, that servo came to life. It was so much smoother and faster. At 8.5v, set up as digital that is an EPIC servo!

• 
  @jessemichalies11 ай бұрын

  I'm pretty sure I have it setup right. I've got the flysky noble nb4 and have 2 of the perfect pass servos and a couple savox servos and a pro tech and haven't noticed any issues but maybe I haven't seen the pp servos full potential yet. I'll have to look into it

• 
  @jessemichalies11 ай бұрын

  My slash I have a castle mamba x running a perfect pass ar 8.5 and it's insane compared to my xrt with the hobbywing only running at 7 .4 I figured the biggest difference is due to the tire size and weight

• 
  @basementracer762211 ай бұрын

  @@jessemichalies You throw that bad boy in the XRT up to 8.5 my friend and those wheels and tires will be a problem no more. Cool vid and it's good to see a YTbr respond well to comments rather than being offended or insulted.

• 
  @robbiebeutlich2333 Жыл бұрын

  What model # servo horn is this I would like to order one. Or post link if possible ?

• 
  @abemack10 ай бұрын

  look up vitavon and search xrt servo horn

• 
  @robertphillips8596 Жыл бұрын

  Thumbs down for the totally obnoxious music!👎 had to turn sound off so as to see the video!🤮

• 
  @penknight8532 Жыл бұрын

  Where are the bodies buried?

• 
  @jrncarphotography6158 Жыл бұрын

  if wife is not impressed you get bigger stuff ;D

• 
  @marycrumpton3806 Жыл бұрын

  I have a ground wire from the camper along with the positive and negative wires (3 total). Where would you connect the ground?

• 
  @jessemichalies Жыл бұрын

  I would groud the camper to the battery and ground the battery to the frame.

• 
  @thoselog Жыл бұрын

  Man, this is the perfect video. Showed me exactly what I needed to see, no nonsense. Thanks.

• 
  @jessemichalies Жыл бұрын

  I'm glad I could help you out

• 
  @Jackyl82334 Жыл бұрын

  It’s nice to see a video of the whole job, not cut and edited and all the bits that you think should be simple cut out, well done. Did you start breaking pinions after putting in the Hobbywing ESC ?

• 
  @jessemichalies Жыл бұрын

  I went through 2 pinions and a spur with the stock esc. I switched to b a Robinson Racing pinion and haven't replaced the gears since.

• 
  @johnsakowski3531 Жыл бұрын

  Can you post a link for servo bracket Thank you.

• 
  @metoo3918 Жыл бұрын

  3:20 Im confused about "I had to take that out." Are you saying that you had to remove it temporarily to get the servo in and you put the bearing and that housing back on, or...are you saying that you had to remove the bearing from the housing and reinstall just the bearing housing (without the bearing)?

• 
  @jessemichalies Жыл бұрын

  If I remember correctly, I think I slide the bearing on the vitavon shaft first, then slide it into the plastic holder for the bearing. I hope that makes sense.

• 
  @obummamumma8699 Жыл бұрын

  Might want to evaluate: 1-your stator output (might need to stock up on extras) 2- winch duty cycle 3- battery capacity Well wishes

• 
  @jessemichalies Жыл бұрын

  I've got a winch on the front as well and have never run into stator or battery capacity issues.