CarStickers.com provides custom sticker solutions, signs, banners, decals, labels, magnets, promotional material, parking signs, and more. Turn your artwork, logo, or any design into a shareable sticker. Create massive signs for your business while using metallic, holographic, or glow-in-the-dark materials. We also have over 50,000 designs to choose from and we never charge a setup fee. You can also order in small quantities, so no matter if you need parking signs, or 1 water bottle sticker, we have you covered. We use top-of-the-line printing equipment for the highest quality in the industry while continuing to have the best pricing available. Visit Carstickers.com and learn what we can help you accomplish.
Пікірлер
Awesome, worked a treat, thanks for the video, very helpful.
How to I make this?
❤
Maybe next time, take the music volume down a notch or two. The music shouldn't compete with everything else.
Nice introduction video 🤙
Can i drive during the 24 hrs its setting?
Absolutely. The reason we recommend waiting is so that the adhesive really has time to adhere to the surface, making the removal of the transfer tape easier. But you should be fine driving. (I wouldn't recommend a carwash though.)
How do you print the multicolor stickers and peel off the transfer tape without damaging the sticker? I thought its no possible to add transfer tape because it will ruin the design
Hello! The strength of the adhesive on the transfer tape is not strong enough to damage the sticker. Once the sticker has been applied and adheres to the surface, the tape comes away from the sticker without any damage.
Do you have to wait for the paint to completely dry ? If I do multiple coats, dosnt make the stencil paper hard or stick to the paint and mess my design up?
Hi TruckandTea! While we realize that every project is different, we have used stencil stickers with wood stain, spray paint, and brushed paint, all with multiple coats and without any issue. We recommend letting the paint fully dry before removing the stencil. If it's removed too soon, the paint could chip, smear, or bleed.
@@Carstickersinc thank you 🙏
My sticker stays on the backing tape not the top?
Press with credit card mine was too and I almost throw it away . After u press lift the top to make sure ur sticker on the upper part if not press again from the back side . Hopefully it will work .
Thank you for such a concise tutorial on sticker application!
I wish I would have found this video 15mins ago cuz I accidentally ripped my sticker in half R.I.P 😭
Same bro
Good stickers but I give this company Car Stickers a fail when it comes to production time and shipping cost. It takes nearly half a month just for them to make a simple sticker and ship it, AND if you want a shorter production timeframe and faster shipping you basically have to pay nearly 500% of the actual total cost of the stickers you want. This Car Stickers company needs to make improvements in its production department, maybe hire more people if that is what's needed.
We are sorry to hear you did not have a great experience. Everything is custom-made in the order it is received, and this can take longer during peak seasons, which is the reason we show current production times before checking out. We do have a Rush option, which is 25% of the order cost or $25 if the order is less than $100, but can seem like more since it is bundled with expedited shipping costs.
Are your stickers see-through? i want to place a sticker on my back window but worried it might block my rear view mirror
The stickers are not see-though unless you order clear vinyl or perforated film. If you would like more information on a specific material that would work best for your situation, please contact our customer service team at 844.647.2730.
Thank you! short, precise and to the point….😊
Thank you!
how to remove ?
Googone
Razor blade is super easy and no mess.
0:45,
You seem like a really nice guy, so please give me some advice. I recently went on vacation to Japan and bought some very unique OUTSIDE stickers. However, I really want to put them INSIDE my 4x4 window so they don’t peel, fade get vandalised etc. they are small, like 50mm various shapes. Is there anything I can do? Like maybe stick them onto clear vinyl and then stick the vinyl inside? They only cost a couple of dollars but mean a lot to me. Thanks.
Hi HAL, this is a very unique situation. I think your idea would work, assuming that you apply them to a larger piece of vinyl since it will only be the area around the sticker that would have adhesive. Please keep in mind that stickers can be difficult to view through a window if there is any tint applied to it. Good luck on your project!
Hi HAL, did you find a satisfactory solution to your needs? I too am struggling to find an answer to my same wishes
@@mattnewfoxred hi, I just stuck them on the outside in the end but am sure sticking them on to the sticky side of clear vinyl and then stick the vinyl to the inside would work. Good luck.
I've been racking my brain trying to figure out how to make a sticker for the inside window. So on your "reverse cut" example, is that just clear vinyl? If so, then how are the letters not clear as well? (I use the Cricut machine)
Hi Rob! The vinyl we use for our transfer stickers have the same color on the front side as well as the adhesive side. Because the adhesive is clear, we cut the design in reverse so when the sticker is applied to the inside of the glass it will appear correct when looking through the glass. I hope that helps!
what machine did you use to print those stickers?
😄 𝙥𝙧𝙤𝙢𝙤𝙨𝙢
𝔭𝔯𝔬𝔪𝔬𝔰𝔪
Hi guys - I purchased several round car decals from you, the latest being a 22" diameter white "53" with 1/4" black border. This will be applied to the side of a car with a kinda harsh compound curved surface, and I was told I can't use soapy water since it might ruin the adhesive. So, how do I go about applying this large decal over a compound surface? I'd know how to do it with soapy water and a hair dryer, but not sure how to without the water. Thank you. -Jeff
Hi Jeff, thanks for reaching out! Our standard white vinyl is made with air-egress technology, which makes applying it a bit more forgiving than a standard sticker. It's the same vinyl used for car wraps. Unfortunately, because of the complexity of different surfaces, it's difficult for us to give specific application advice. We recommend checking with a local installer for a more detailed technique for your specific vehicle.
Awesome work Kevin!
Thank you very much!
Thanx
You're Welcome 👍
Thanks for d video
Thank you very much!
Wow, this a really informative video. I'm glad I watched it. I scoffed at first, but it really helped me.
Nice
Thanks Jade, have you tried creating your own yet?
Nice one!!! You should have way more views! Take a look at Promosm! I’ve been using it to help grow my Instagram, you could use it to promote your channel!
Very informative, thank you!
Very welcome!
NICE
Thanks Heloo, reach out if you're in the market for that custom experience. ;)
How long do these take to ship usually
Hi Sawyer, Usually within 24-48 hours. Although large (or bulk) order might take longer.
Machine how much
Hi Creative - no minimums, check out pricing here: www.carstickers.com/products/stickers/custom-stickers/setup/multi-color-transfer-stickers/
So pleased with this product. It came out perfect, thank you CS
What sticker is the best bond? For short is the longer life sticker?
How to remove it ??? How many years it Will.....
Our transfer stickers can be removed as easily as using your fingernail to get underneath and pull up a piece, then pulling it off. It will last up to 5 years and should not leave any residue behind when removed.
Omg
Thank you so much I love the stickers just thank you so much
rigscoffee.org/shop/rigs-coffee-stickers/
rigscoffee.org/shop/rigs-coffee-stickers/
Types of stickers and its an infomercial about sticker shapes, how stupid is this
Thanks, but that music is wholly unnecessary
you guys ship world wide???