Пікірлер

• 
  @mauriciocastro636319 сағат бұрын

  Thank you for sharing this process. I have similar pot holes in my driveway, but a much more steep slope. I think this pathc should go larger over the cracked pieces you have around. this patch. merching it with the healthy sphalt on the sides. Iknow, it;'s more work and material.

• 
  @labratnationКүн бұрын

  I got the replacement from Whirlpools website BUT... the bulb gets HOT as soon as I turn it on, is that normal ?

• 
  @simonjohansson7284Күн бұрын

  Has it been good for you?

• 
  @FrankLamb-p2uКүн бұрын

  Was not too bad, damn ads

• 
  @RedMoonRising24Күн бұрын

  My app won’t connect despite my device already working with my phone. I need to change the radio station and can’t figure out how to do it on the device itself. Help!

• 
  @cowboy_curt2 күн бұрын

  This is the correct way. kzread.info/dash/bejne/pZqByo-Oec_Mj7A.htmlsi=25x9l2CqAjmIQnQZ

• 
  @cowboy_curt2 күн бұрын

  You're doing it 100% incorrectly, and you need to be using a corded Hammer Drill. You aren't supposed to drill from the ends.

• 
  @shindukess3 күн бұрын

  Hey are you still doing anything with this anymore? Would you sell it if you're not?

• 
  @Susan-sn8fx3 күн бұрын

  I’m right on the verge of ordering this!!! Thank you!!! I was wondering if it was worth the money… it is def more quality than the others.

• 
  @SKLIFEstyle3 күн бұрын

  @Susan-sn8fx Yes, we enjoyed it immensely, as did pup. Price isn't pretty, but the fun on the water is worth it. Thanks for your feedback. Be sure to subscribe, and Happy 4th!

• 
  @baddogentertainment69605 күн бұрын

  The videos advertising it seem to all be using a corded hammer drill

• 
  @SKLIFEstyle5 күн бұрын

  Your absolutely right. I just had a good cordless and figured I would still try it and figured manynothers would do the same. I did just buy this again and plan on doing a thorough test with a corded drill v cordless, with dry wood, partially split, the whole 9. Be sure to Subscribe, I hope to run it in the next day or so and post it before the weekend.

• 
  @claudettebradley29766 күн бұрын

  do you know how to factory reset them? I can't figure out which device it currently is paired to and I can't unpair it to pair it to another device. Hope that makes sense!

• 
  @SKLIFEstyle6 күн бұрын

  That ain't do not know. I would look for a small pinhole somewhere on the bottom to press in possibly, but Idk if you can. I don't have them with me to review. Sorry I couldn't be more help. Maybe trying to repair using the Bluetooth button and then seeking to pair to override but I'm sure you've already tried. All the best!

• 
  @Beargaming278 күн бұрын

  What modle is this and when was it made

• 
  @SKLIFEstyle8 күн бұрын

  Toyota Highlander Limited 2015

• 
  @Physical4ever10 күн бұрын

  I have a silver 05 FWD 3.3 V6, it just hit 230k and still runs like it’s brand new, mine has cloth power drivers seat, factory sunroof, third row seat. And my sunroof is the exact same way and it drives me nuts

• 
  @SKLIFEstyle10 күн бұрын

  Yeah I still just stop 2 inch before it's all the way back lol. But otherwise the car runs great so I'll take it. I'm closing in on 200K within the next year. I love hearing all the stories of people's experience with their's. Thanks for your comments. Have a great summer and be sure to Subscribe!

• 
  @Mixwell198310 күн бұрын

  As someone who used one you had no chance.. i have a video of me testing one with an impact sriver and wrench and i was trying to get it in one shot filming so got the bit at some wonky angles Eventually the nut part on mine stripped but heres my attempts. Wish theyd make one with a 1/2 hex head for a socket instead of the hex bits.. enjoy kzread.info/dash/bejne/rIR90qSJmLjVe8Y.htmlsi=qhF5jCS8P5kdJsC3

• 
  @vincecotton12711 күн бұрын

  I dig your Safety Shoes Mate!😃

• 
  @SKLIFEstyle11 күн бұрын

  Lol, I ordered a new bit and will be trying with a much better set, method and test so be surento Subscribe and stay tuned. I hope to shoot that video this weekend.

• 
  @primary71011 күн бұрын

  Thank you I just bought one from Wal-Mart and came With no instructions..would not able to set it without watching your video

• 
  @SKLIFEstyle11 күн бұрын

  I broke a leg on mine, competly my fault but I think I'm about to buy another, it was great. Thanks for your feedback, happy to hear it helped. Have a great summer, and be sure to Subscribe!

• 
  @reynaldoorellana985112 күн бұрын

  Yo istale ese acserio pero cuando pongo musi con mi celular se escucha como tranferencia de la radio

• 
  @mikey_atl12 күн бұрын

  Thanks for the update bud!

• 
  @rootherhymejedi987113 күн бұрын

  Anyone know how many gallons the Xtra Large Top Paw dog pool holds? I can't find the info anywhere! I'm trying to calculate how much💦 water it takes to refill it 2 or 3 times a week = to the size of my well. This pool takes quite a WHILE to fill up. I just don't wanna dry out my well. And as you know the water gets dirty quick, so it's gotta be changed constantly. Dog life. 🤷 Also, this pool is awesome. Roomy for 2 big 🐕‍🦺dogs at once. I have a female,🥊 boxer, Diva, who's approach is dainty & delicate with everything, so she is NP. But my male Pitbull, Nova, is a🤪 maniac & won't let anyone cut his 💅 nails. So after spending almost 💸$60 on this pool, after opening it, I realized I needed to go to Lowe's & invest another 💸 $60 on a Traffic Master 5ft by 7ft (rubber/carpeted mat)🤦. Kinda like a garage mat. I traced the diameter of the pool around the mat & cut the mat to lay it down at the bottom of the pool (which fit damn near perfect), all from fear of his nails 💅puncturing the bottom. The bottom of the pool is made from decent tough material. But I don't want to have to buy another dog pool ever again. So i invested the extra 💲 to protect it. So far so good. And he absolutely 🥰 loves to do those little rapid 🐾paw paddling zoomies in the pool & 🛁bathtub, like he's 🏊swimming. And it still held up. Gotta make sure he doesn't do it to the sides though. I'm also in Connecticut. N.Branford area. Hope this helps anyone if they are worried about their 🐶dogs 💅nails as well. There's probably cheaper rubber mats you can buy to hack this problem. But I needed something REALLY tough, he's a STRONG heavy dog. And I still have yet to find a bouncy ball, that he can't destroy.

• 
  @SKLIFEstyle13 күн бұрын

  That's a great idea with the added mat, especially if you won't be moving the pool much. I believe the pool is about 145 gallons. Thanksfor the feedback on the pool. Be sure to Subscribe!

• 
  @rootherhymejedi987112 күн бұрын

  @@SKLIFEstyle thank u much brother

• 
  @GNPBES14 күн бұрын

  I'm up here on lake Champlain as well. Have you uses this motor any more? Looking at this for my 14' river boat. Also whats the measurement from the top of the transom mount to the planer board above the prop? Thanks.

• 
  @SKLIFEstyle14 күн бұрын

  That's awesome. I don't have the motor any longer, I actually sold the boat earlier this year since it wasn't going to get much use for the second year in a row. But this was a short shaft so I feel like it was about 18 inch. They have two versions I believe but the short shaft worked great for this application.

• 
  @grandmarshal753914 күн бұрын

  An easier way to change the 2 bulbs on the front dome light is to carefully remove the plastic lens that has 4 clips about a 1/2 inch in from the corners. Use a very narrow knife to pry from these areas. Once one corner is released, move to the next. Much easier than removing the whole assembly. Also the bulbs in the car are not halogen bulbs but ordinary filament type bulbs which also get very hot. halogens would melt the plastic in no time... Just a FYI

• 
  @user-bi1fi8nu5q14 күн бұрын

  Hi shon I can’t wait for the baby girl

• 
  @SKLIFEstyle13 күн бұрын

  I know, we feel like she has so much personality already, can't wait to meet her. Can't believe it's only another month, time flew!

• 
  @David_K_14 күн бұрын

  This helped me today. Thank you!

• 
  @kimberlyc8415 күн бұрын

  I'm a little late, but mine has a tag that says "Do not use to inflate vehicle tire." Mine looks like yours. Maybe different model. 🤷‍♀️

• 
  @SKLIFEstyle15 күн бұрын

  Could be. I feel like someone else mentioned something similar a while back. Very silly for a store like that to sell something incapable of such a basic expectation, and also not boldly state it on the package. But it very well could have. I don't have it anymore as you can clearly see why our I would check. Thanks for watching and the feedback. Be sure to Subscribe and have a great Summer!

• 
  @daveplem15 күн бұрын

  I just spent $4,100 on my $4,200 Highlander Limited. I got it with 200,000 miles. I’m at 367,000 miles now, and this is the first thing I’ve done to it other than tires and brakes. I had to replace the electric engine fans, A/C condenser, vacuum hoses, and catalytic converter. (And some little shit.) The engine runs perfectly. I’ll never replace the timing belt or water pump unless 1) the belt breaks, or 2) the pump leaks. It’s not an interference engine, so why not get all of the life out of it?

• 
  @Cavanpikefishing15 күн бұрын

  Hi thanks for the info i have a 3.5 but thinking of upgrading is this a long shaft?

• 
  @SKLIFEstyle15 күн бұрын

  They have a long shaft, but no, this is the short shaft version. Short is best for the size inflatable I purchased.

• 
  @Cavanpikefishing15 күн бұрын

  @@SKLIFEstyle Thanks for your reply Em no that's great i need a sort shaft for the American sundolifn 12 here in Ireland ,great stuff thank u is it definitely a good moter?

• 
  @SKLIFEstyle15 күн бұрын

  @Cavanpikefishing I thought it was. Ran well, decent powe, easy to operate, and pretty much a mercury clone, so if you did need want parts, it should be simple to find. Hard to justify over a grand or more for such little HP. Worked well with the external tank too.

• 
  @Cavanpikefishing15 күн бұрын

  @@SKLIFEstyle great news, thanks again😊

• 
  @lienzednem134815 күн бұрын

  😂😂😂, this has to be a joke ... Cordless wouldn't do the job.

• 
  @SourceRe-es2jc16 күн бұрын

  You did a great job with the final trim and I don't think anybody has that in their garden, so look at it As a gem.

• 
  @SKLIFEstyle16 күн бұрын

  Thanks, it's pretty tall, and wide so very awkward even with a ladder and long trimmer. And you're right it is very unique

• 
  @BigRalphSmith17 күн бұрын

  Almost looks like a juniper and a spruce were grafted together as saplings.

• 
  @arun770618 күн бұрын

  is it available in India or not

• 
  @SKLIFEstyle16 күн бұрын

  I have no idea. I'm sure some kind of version is, they have so many types of scooters there.

• 
  @kendalljiles690618 күн бұрын

  Great video

• 
  @SKLIFEstyle18 күн бұрын

  Haha, I did not expect the all the love for Franentree, I may have to reconsider

• 
  @PUREWATER121218 күн бұрын

  🙋🏽‍♀️👋🏽👋🏽 please do reconsider 😉😁...I can hear the Fraken Tree saying "what you are not impressed by my beauty and my intelligence and what I have gone through to intertwine as one 🍃🌲🍃 I am the perfect example for you humans to show that nature knows how to get along with each other 😉😁🍃..I hope you do take a poll.. and see how many are in favor of...I'm beautiful as is"😉🍃🙋🏽‍♀️ I VOTE SAVE FRANKEN TREE👇🏽💚😍💯

• 
  @commutergirl72718 күн бұрын

  I just bought one. My dogs had the plastic kind and has a crack so I invested in this.

• 
  @PUREWATER121218 күн бұрын

  🙋🏽‍♀️SAVE IT....💯🍃💚.

• 
  @laobejanegra92618 күн бұрын

  *OMG LOVE IT 💯 SAVE FRANKENTREE!!* 🙏🏻

• 
  @nadeendonofrio159119 күн бұрын

  Save the FrankenTree!!! 😂😂

• 
  @BYOUN89041820 күн бұрын

  thanks bro. your review help me a lot.

• 
  @rogerajl8621 күн бұрын

  My wife just got me this for Father’s Day , I’m Happy. Is it worth it to buy the warranty??

• 
  @SKLIFEstyle20 күн бұрын

  I would say don't bother. If there is no problem in the return window most likely there won't be in the next couple years. It runs so well and made very well. Unless you are super rough with your stuff ypu should be okay

• 
  @rogerajl8617 күн бұрын

  @@SKLIFEstyle Thank you sir!! Have a great one

• 
  @cahg387122 күн бұрын

  Depends on how dry and what type of tree the wood is.Pine is knotty and heavily sapped and a soft wood,then that type of tree needs to dry for a while then that tool should work fine.But if it’s a hardwood tree like Oak and certain Maples,then most likely not.

• 
  @DavesDimension23 күн бұрын

  bro i just bought my go pro..u saved me and gave u a sub

• 
  @hagangibson175623 күн бұрын

  Just want you to know the good news of the Gospel. The bad news is that you and I (everyone) are sinners. And since God is Holy He doesn’t put up with sin. So sin leads to hell. The good news is God sent His Son, Jesus Christ, to die for our sins on the cross. This means Jesus paid the debt we owed but couldn’t pay. So if one repents and places faith (trust) in Jesus Christ they can be assured of heaven. I love you and so does God.

• 
  @homerelesperance285727 күн бұрын

  I'm no expert or mechanic on gas powered engines but what I know is that when you first start running a brand new gas powered engine, you have to first "break-in" (run the engine at half power or less while it takes time for it to get lubricated from the oil to fully lubricate the moving parts inside the engine.) the engine. The manual should tell you the break-in period of the engine, how long to run the engine, how many mileage it needs to run or how much gas need to be consume to get the engine broken-in or fully lubricated. When the engine is "broken-in" or fully lubricated, it is then when you can run it at full throttle or power but before that if you try to run it at full power before it's not fully lubricated or "broken-in", you may or will risk the engine ceasing or locking up all of a sudden while riding it and you may probably end up being thrown off the scooter from a dead stop.

• 
  @kareemkhamis8727 күн бұрын

  Thank you

• 
  @lindagronski620727 күн бұрын

  Very helpful video. I have a problem you didn't mention: The screw was put in so tightly that I can't turn it. I have changed bulbs in microwaves before. It's not rocket science, but whirlpool put the light is in a very awkward position (much too far back) and makes a simple chore a real pain.

• 
  @Strive-For-Different28 күн бұрын

  Get a real hammer drill. Commonly referred to as SDS Drills. Then get an SDS to Keyed Chuck adapter. 🤷‍♂️🤷‍♂️🤷‍♂️

• 
  @pitapitabreadАй бұрын

  have you thought about swapping out the stock engine for bigger engine, say 63cc 2-stroke?

• 
  @SKLIFEstyle29 күн бұрын

  Maybe once it blows, or I may go 2000w electric conversion...but probably not before unless I just stumble upon a great deal on one and feel up for the afternoon project.

• 
  @ia6980Ай бұрын

  How sturdy are the base mounts?

• 
  @SKLIFEstyle29 күн бұрын

  They are not fixed but they are sturdy enough from the rubber on rubber they barely move. I may adjust it like 2 or three times during the day max and it's light as a paper so it's literally just pushing it forward or back. I honestly would not look to hard fix it in place. It was much more compliant while driving 15mph than expected. During rough weather that's when it may shift a little more and again it never just slipped off, or crazy out the way but may have moved a couple inches.

• 
  @jarradmitchell3832Ай бұрын

  Oh wow, not even using an pneumatic hammer, what a clown. You’d need a 1500w rotary pneumatic with at least 4.5 joules, hence the shanks they normally sell with 😂

• 
  @aurinkonzАй бұрын

  2 is high speed low torque

• 
  @nathanguerra9314Ай бұрын

  V6 can pull up to 3500lb