Looks great! I have a K-Break kitted car (1:1 scale!) so id love to build this kit at some point. Just a shame it's facelift version, I wonder if this model could be combined with one of the pre-facelift non K-Break models?
@argelysregalado23982 ай бұрын
Because I'm ryosuke takahashi
@argelysregalado23982 ай бұрын
That my car beautiful 😍
@tankoradosslotcarworld4 ай бұрын
👍
@geekdiggy5 ай бұрын
nicely done! i recently purchased this kit and am looking forward to diving into it!
@user-ob6vh3go2k6 ай бұрын
Спасибо за приятное видео. прям можно смотреть и наслаждаться. Но подскажите, каким инструментом вы углубляли проём двери? Вроде бы и скрайбер, но ручка больше похожа на канцелярский нож. Я новичок и мне интересно.
@ken21996 ай бұрын
Can I send my kit to you and have it painted?
@hybridAbsol7 ай бұрын
Of all street tuned Rx7 i have seen all these years, this has to be one of the best
@BrydensModelWorks4 ай бұрын
Thank you so much for the comment! Yeah it is a really nice looking classic!
@samcarmel69758 ай бұрын
To remove the excess on the panel lines what did you use?
@scottslothower68409 ай бұрын
I really like your builds. Why has it been so long since you posted.
@samcarmel69759 ай бұрын
Beautiful vid. I'm looking to get one of these are try my hand at this. This video will for sure help! I had a question though, which product did you use to clean up after the panel lines? Also, is an airbrush needed?
@fauzanyudithama6509 Жыл бұрын
Bagaimana cara nya setting chamber nya?
@TheCinderDude Жыл бұрын
I believe the roof is warped there to indicate where the sunroof should be!
@scaleffect Жыл бұрын
A great choice. In my opinion, the white FC is as iconic as the panda Trueno when thinking of Initial D. Hope to build one of these myself some day.
@sinsinsss5216 Жыл бұрын
Wong koyok biden karo kelaurgane kui wedi mati wedi
@sinsinsss5216 Жыл бұрын
Bongso opo yahudi.
@sinsinsss5216 Жыл бұрын
Aku wae kenal ora di sikso mikir diakui
@sinsinsss5216 Жыл бұрын
Lho nek yahudi senenge ngakui pihak wong deknen karo cino penjilat
@sinsinsss5216 Жыл бұрын
Biden ora yahudi biden kui rak ndue agama
@sinsinsss5216 Жыл бұрын
Lha yo memang yahudi cino otake menjijikan
@weekendhobbyist Жыл бұрын
Great job on this one! I have the same kit and was thinking about building it.
@lrdcly1 Жыл бұрын
Amazing build! Dropped you a sub
@TasosX Жыл бұрын
Hello friend. Amazing work. You know what kind of plastic is the body shell?
@Influx.media_ Жыл бұрын
amazing
@dustinrossi9384 Жыл бұрын
New sub woot woot
@modelrestorations Жыл бұрын
Super cool! Just found you - subd. Thanks for posting!
@rcsmiths Жыл бұрын
This is Aoshimas's pre painted???
@BrydensModelWorks Жыл бұрын
no, it's not
@isaac_5217 Жыл бұрын
Hey man, do you know the wheelbase measurements for this car? Planning on buying and then putting on my k989 if it fits
@emeraldeyeball2002 Жыл бұрын
Almost exactly 4 inches
@joypark894 Жыл бұрын
I'm really waiting for your next work!!
@leonm6969 Жыл бұрын
What paint did you use to paint the tailights?
@BlackyBrownDestruction9337 Жыл бұрын
Brings back memories 🎉
@enso_scale Жыл бұрын
Beautiful Car. Great Job 👍
@tobo__ Жыл бұрын
Where did u buy it?
@johnburr3888 Жыл бұрын
I believe he uses plazajapan.com from his previous videos ^^
@emeraldeyeball2002 Жыл бұрын
I got it from a HobbyTown, so some hobby shops do have it.
@user-mg2wf7mk3t Жыл бұрын
Good job. Can you send a link to this kit please?
@MetalMania3DTV-TAS-AUS Жыл бұрын
Beautiful build and details amazing results, so you have a New Subscriber and we hit the bell check us out when u get time Bro 👊 Cheers🍺🍻🍺🍻 KC 🤗✔👊 Cradle Mountain Tasmania Australia 🇦🇺🇦🇺🤝😎👍
@keithsmodelsandrcs6593 Жыл бұрын
awsome this is gallardo iv got its discontinued kit now this
@keithsmodelsandrcs6593 Жыл бұрын
cool kits lambos bryden iv got couple nice ones in stash i only built a countach but got another full of bodykit aero parts a and every lambo from muira up to the avendatdor spyder I have a favourite it's fujimis sponsored by link murcilago gt3 car its awsome anyway you do awsome and amazing work great job 👍Keith
@BrydensModelWorks Жыл бұрын
Thanks!
@warren88tv Жыл бұрын
👍 goog
@keithsmodelsandrcs6593 Жыл бұрын
very familiar taste in jdm cars every kit you hav built iv eather built or have most still i want my painting detail to improve b4 i start my beloved Honda stash and useing the B series vtec engine from the 125th scale civics I'm resin casting them an i found nicely detailed one on 3D printer site i got great valve covers and transmissions rest kept failing so plan is ill make seperate files for block head v cover and transmission pullys alternator seperate and fuel rail wit injectors they turn out very tin flimsy trying to get them rite,👍anyway great job on eg bro ur awsome builder👍Keith
@keithsmodelsandrcs6593 Жыл бұрын
these rx3 are rare kit even when rereleased there start year i picked up 4 them one for freind 2 for myself and another for another freind ebay ware looking 100 to 160 euros for them i got in my local 40euro each
@keithsmodelsandrcs6593 Жыл бұрын
Nice bryden I just found ur channel threw fc rx7 iv got few initial D to get build soon including this one awsome job 👌👍just subbed to u ,👍Keith
@BrydensModelWorks Жыл бұрын
nice! thanks, Keith!
@jdcollection2694 Жыл бұрын
Awesome diorama. It looks real
@BrydensModelWorks Жыл бұрын
Thanks! Yeah I like it a lot. Not a bad deal at all.
@carrestore2 жыл бұрын
nice video
@Wesley_C2 жыл бұрын
What's up brother? I do love Mazda RX7 FC, a true legendary car, looks amazing model car.
@BrydensModelWorks2 жыл бұрын
Thank you! Yeah, this really is a legendary car, I really like the way it looks! 🙂
@tcandle6952 жыл бұрын
Nice. Could you share the Amazon link? Thanks
@BrydensModelWorks2 жыл бұрын
Glad you liked it. Here's the link. This is what I got. Bivitre 1/24 Scale Die-cast Car Garage Display Case with Clear Acrylic Cover and LED Lighting for 2 Parking Space (Green) a.co/d/4MTzTKg
@insomniahobbies2 жыл бұрын
Nice! Some one was trying to tell me there was never a Gallardo kit made. I knew there was and not only do I now have proof, I have a new builder to watch!
@BrydensModelWorks2 жыл бұрын
Yeah, this one was fun to build, I like its simplicity, but takes a little bit of extra TLC to build it right. I've had a few hiccups on the build, but I learn something new from each build from my mistakes and I sometimes just leave as it is to remind myself to try and not make the same mistake again, thank you for watching!
@johnmorgan31602 жыл бұрын
😞 ᎮᏒᎧᎷᎧᏕᎷ
@Jimmiburn2 жыл бұрын
What a refreshing change, great channel beautiful finish on this model, subscribed. 👌
@BrydensModelWorks2 жыл бұрын
Thank you for your encouragement! Keeps me motivated!
Пікірлер
Ок!!! Ценно!
Can I know the wheelbase length of this model?
Looks great! I have a K-Break kitted car (1:1 scale!) so id love to build this kit at some point. Just a shame it's facelift version, I wonder if this model could be combined with one of the pre-facelift non K-Break models?
Because I'm ryosuke takahashi
That my car beautiful 😍
👍
nicely done! i recently purchased this kit and am looking forward to diving into it!
Спасибо за приятное видео. прям можно смотреть и наслаждаться. Но подскажите, каким инструментом вы углубляли проём двери? Вроде бы и скрайбер, но ручка больше похожа на канцелярский нож. Я новичок и мне интересно.
Can I send my kit to you and have it painted?
Of all street tuned Rx7 i have seen all these years, this has to be one of the best
Thank you so much for the comment! Yeah it is a really nice looking classic!
To remove the excess on the panel lines what did you use?
I really like your builds. Why has it been so long since you posted.
Beautiful vid. I'm looking to get one of these are try my hand at this. This video will for sure help! I had a question though, which product did you use to clean up after the panel lines? Also, is an airbrush needed?
Bagaimana cara nya setting chamber nya?
I believe the roof is warped there to indicate where the sunroof should be!
A great choice. In my opinion, the white FC is as iconic as the panda Trueno when thinking of Initial D. Hope to build one of these myself some day.
Wong koyok biden karo kelaurgane kui wedi mati wedi
Bongso opo yahudi.
Aku wae kenal ora di sikso mikir diakui
Lho nek yahudi senenge ngakui pihak wong deknen karo cino penjilat
Biden ora yahudi biden kui rak ndue agama
Lha yo memang yahudi cino otake menjijikan
Great job on this one! I have the same kit and was thinking about building it.
Amazing build! Dropped you a sub
Hello friend. Amazing work. You know what kind of plastic is the body shell?
amazing
New sub woot woot
Super cool! Just found you - subd. Thanks for posting!
This is Aoshimas's pre painted???
no, it's not
Hey man, do you know the wheelbase measurements for this car? Planning on buying and then putting on my k989 if it fits
Almost exactly 4 inches
I'm really waiting for your next work!!
What paint did you use to paint the tailights?
Brings back memories 🎉
Beautiful Car. Great Job 👍
Where did u buy it?
I believe he uses plazajapan.com from his previous videos ^^
I got it from a HobbyTown, so some hobby shops do have it.
Good job. Can you send a link to this kit please?
Beautiful build and details amazing results, so you have a New Subscriber and we hit the bell check us out when u get time Bro 👊 Cheers🍺🍻🍺🍻 KC 🤗✔👊 Cradle Mountain Tasmania Australia 🇦🇺🇦🇺🤝😎👍
awsome this is gallardo iv got its discontinued kit now this
cool kits lambos bryden iv got couple nice ones in stash i only built a countach but got another full of bodykit aero parts a and every lambo from muira up to the avendatdor spyder I have a favourite it's fujimis sponsored by link murcilago gt3 car its awsome anyway you do awsome and amazing work great job 👍Keith
Thanks!
👍 goog
very familiar taste in jdm cars every kit you hav built iv eather built or have most still i want my painting detail to improve b4 i start my beloved Honda stash and useing the B series vtec engine from the 125th scale civics I'm resin casting them an i found nicely detailed one on 3D printer site i got great valve covers and transmissions rest kept failing so plan is ill make seperate files for block head v cover and transmission pullys alternator seperate and fuel rail wit injectors they turn out very tin flimsy trying to get them rite,👍anyway great job on eg bro ur awsome builder👍Keith
these rx3 are rare kit even when rereleased there start year i picked up 4 them one for freind 2 for myself and another for another freind ebay ware looking 100 to 160 euros for them i got in my local 40euro each
Nice bryden I just found ur channel threw fc rx7 iv got few initial D to get build soon including this one awsome job 👌👍just subbed to u ,👍Keith
nice! thanks, Keith!
Awesome diorama. It looks real
Thanks! Yeah I like it a lot. Not a bad deal at all.
nice video
What's up brother? I do love Mazda RX7 FC, a true legendary car, looks amazing model car.
Thank you! Yeah, this really is a legendary car, I really like the way it looks! 🙂
Nice. Could you share the Amazon link? Thanks
Glad you liked it. Here's the link. This is what I got. Bivitre 1/24 Scale Die-cast Car Garage Display Case with Clear Acrylic Cover and LED Lighting for 2 Parking Space (Green) a.co/d/4MTzTKg
Nice! Some one was trying to tell me there was never a Gallardo kit made. I knew there was and not only do I now have proof, I have a new builder to watch!
Yeah, this one was fun to build, I like its simplicity, but takes a little bit of extra TLC to build it right. I've had a few hiccups on the build, but I learn something new from each build from my mistakes and I sometimes just leave as it is to remind myself to try and not make the same mistake again, thank you for watching!
😞 ᎮᏒᎧᎷᎧᏕᎷ
What a refreshing change, great channel beautiful finish on this model, subscribed. 👌
Thank you for your encouragement! Keeps me motivated!