Пікірлер

• 
  @kczach497022 күн бұрын

  @modiconbob where’d you get one with a back seat?

• 
  @ModiconBob22 күн бұрын

  The previous owner modified it, poorly I might add. I redid most everything he did. Gives me a lot more room and storage.

• 
  @alfredgrafke1792Ай бұрын

  What was the initial timing on the crank prior to dropping the distributor in. Sounds great sir. Thank you for the reply.

• 
  @ModiconBob19 күн бұрын

  I put the engine at TDC and pointed the distributor in with the vacuum port disconnected and the line plugged. Started the engine and set it at 6-8 degrees. Then connected the vacuum line and went to about 22 degrees. After running a bit I set it by the vacuum gauge.

• 
  @alfredgrafke1792Ай бұрын

  What was the initial timing on the crank prior to dropping the distributor in. Sounds great sir. Thank you for the reply.

• 
  @ModiconBobАй бұрын

  I put the damper on TDC of #1 and dropped the distributor in. I turned the distributor as I cranked it to get it to run. I blocked the vacuum line and set it at about 8*. With the vacuum line attached, I set it to 25ish* both using a timing light.

• 
  @cleettaurus8637Ай бұрын

  It sound like crap 😂

• 
  @ModiconBobАй бұрын

  haha

• 
  @jimhowell7450Ай бұрын

  YES SIR!! That’s what I’m talking about ❤👍 Awesome!!

• 
  @ModiconBobАй бұрын

  Thanks 👍

• 
  @Bricklinsv1970Ай бұрын

  Sounds mean!

• 
  @ModiconBobАй бұрын

  Thanks!!!!

• 
  @user-vv6mx6vx7z2 ай бұрын

  $140K for a roller is steep unless your well set up to build it and flip it

• 
  @ModiconBob2 ай бұрын

  Yep, but something for everyone I guess

• 
  @nightwolf8832 ай бұрын

  The voice actor of Christine

• 
  @plcfixr29582 ай бұрын

  Haha

• 
  @plcfixr29583 ай бұрын

  Glad that it helped!

• 
  @artisticcheese3 ай бұрын

  Thanks, that did it for me too.

• 
  @mustangman63653 ай бұрын

  The chrome trim is added with the visibility group option. Check your Marti Report for this option. There is also a side trim piece. BTW, I have a very similar Mach 1 in Wimbledon White only mine has a Dark. Red interior (3DA).

• 
  @ModiconBob3 ай бұрын

  Thanks. I will be adding the rocker panel trim soon. It apparently had been removed before I owned the car.

• 
  @user-vv6mx6vx7z4 ай бұрын

  Love the white on white

• 
  @plcfixr29584 ай бұрын

  Thanks!

• 
  @brianhawk18544 ай бұрын

  Great job impressed

• 
  @plcfixr29584 ай бұрын

  Thanks!!!

• 
  @jimsmith98195 ай бұрын

  nice truck, ive seen some extended cab deuces that looked like crap, but i like yours

• 
  @plcfixr29585 ай бұрын

  Thanks!!!

• 
  @charlibaltimore76415 ай бұрын

  YUMMO!!!

• 
  @plcfixr29585 ай бұрын

  They are!!!!!

• 
  @jesseerickson6626 ай бұрын

  Nice. That sounds a lot like my 75 f150. It's got a 428 cobra jet, just not the scj.

• 
  @danadribnenki87746 ай бұрын

  Nice job sir! Well done! Thanks for showing us this method. Blessings.

• 
  @ModiconBob6 ай бұрын

  Thanks!

• 
  @victorcarreras24996 ай бұрын

  Automatic transmission

• 
  @plcfixr29586 ай бұрын

  Nope, Spicer 5 speed.

• 
  @victorcarreras24996 ай бұрын

  Good truck just need power steering

• 
  @plcfixr29586 ай бұрын

  It does have the Waterloo power steering.

• 
  @JacksoNR267 ай бұрын

  That sounds awesome

• 
  @plcfixr29587 ай бұрын

  Thanks!

• 
  @dickbunting99327 ай бұрын

  Wish I was there to help out. (Eating of course)

• 
  @ModiconBob7 ай бұрын

  We ate your share....lol

• 
  @martinneps93877 ай бұрын

  I just wish this truck was a dump. I would use it more as a dump truck than just a regular truck

• 
  @plcfixr29587 ай бұрын

  There are dump kits available.

• 
  @jwoody88157 ай бұрын

  Oh man what a famous beast, you know its got some crazy torque. That engine alone is prolly worth more than some cars. Crazy that the idle is strangely reminicent of a cummins, I have the urge just to hear it run on repeat.

• 
  @ModiconBob7 ай бұрын

  haha! True

• 
  @KITLEVEY8 ай бұрын

  Can you tell me which starter motor you used on this set up. I've tried several and they all just howl/scream when you turn the key. SCJ and CJ flex plate ring gears are different diameters.

• 
  @plcfixr29588 ай бұрын

  I used a powermaster. I'm not sure of the exact model. My 428SCJ has a 4 speed flywheel, but before that I had a auto flex plate and C6. Used the same starter on both. If you'd like I can get the model number of the power master unit that I have.

• 
  @militarydude45918 ай бұрын

  I’ll be putting an M35A2 under the barn as soon as I’m able. I want to talk with you further about where you got your Deuce from and how you got it to that point in the video. I will definitely get back in touch with you later. Have a Blessed day sir.✝️🎄

• 
  @ModiconBob8 ай бұрын

  Sure. I'd be happy to discuss it with you.

• 
  @bobwhite43448 ай бұрын

  nice job.

• 
  @WolfmanJack-ol2rl8 ай бұрын

  TAKE THE FUEL LINE BOOTS OF ALL THEY DO IS HOLD WATER AND WILL RUST THE LINE ENDS

• 
  @ModiconBob8 ай бұрын

  Understood, but my deuce lives inside a garage so out of the weather and rarely is out in the rain! Lol

• 
  @WolfmanJack-ol2rl8 ай бұрын

  NO YOU HAVE TO FIND THE MARK IN SIDE THE SHUT OFF HOUSING USE A MIRROR AND A LIGHT

• 
  @ModiconBob8 ай бұрын

  I looked through the fender when the power steering is mounted.

• 
  @stephaniemillin59259 ай бұрын

  I bleed FORD BLUE

• 
  @timthetrailman456310 ай бұрын

  It was a great event. my first time going. I wish I could have met more content creators like yourself.

• 
  @ModiconBob9 ай бұрын

  I really didn't see many folks videoing while there......

• 
  @misigis10 ай бұрын

  First time I have ever seen a ‘57 T-Bird sedan. That’s one big Thunderbird 🤔😃

• 
  @ModiconBob10 ай бұрын

  Yes, it is. The owner told me it has been in his family since it was purchased new. It is always a top contender at this race.

• 
  @user-vv6mx6vx7z10 ай бұрын

  Looks good. Sowed your oats all over that field!

• 
  @plcfixr295810 ай бұрын

  Haha, thanks!

• 
  @ronbonick426511 ай бұрын

  I wish youd make a video on the hood shocks and added fuel tank and vent system Great ideas Bro

• 
  @ModiconBob11 ай бұрын

  Thanks! I may do that ! Please Subscribe to stay posted.

• 
  @ronbonick426511 ай бұрын

  SWEET !!!!!!!! a lot of what youve dont I have had the same ideas. Which area of the country do you live it?? Subscribed

• 
  @ModiconBob11 ай бұрын

  Thanks! I'm in central Virginia.

• 
  @Mr2002Ford15011 ай бұрын

  My Dream!

• 
  @ModiconBob11 ай бұрын

  Everything is for sale at the right price! Lol

• 
  @gorgonbazil265211 ай бұрын

  Love it! Not a big fan of the three deuces, Dual quads is my thing,, But yeah, three deuces looks cool!

• 
  @ModiconBob11 ай бұрын

  Thanks! I realize that the 3-2s and the intake don't flow as well as the 2-4 set-ups, but like you said, the cool factor does it for me!

• 
  @coomr41911 ай бұрын

  Dude that's so freaking cool

• 
  @ModiconBob11 ай бұрын

  Thanks!

• 
  @Scythe_Voltage11 ай бұрын

  Idk how people can learn and work on the inside of a motor, so many moving parts and problems that occur. I can change the oil and that’s about it

• 
  @ModiconBob11 ай бұрын

  It takes a while to get into it for certain. i am blessed to have the "fix-it gene!" Lol

• 
  @outdoorfreedom977811 ай бұрын

  What do you plan on putting it in?

• 
  @ModiconBob11 ай бұрын

  I haven't quite decided yet. I am leaning towards a 32 "Deuce coupe" kit car.

• 
  @alpfaff874711 ай бұрын

  I have found my dream deuce....that is the best one I have seen yet. Did you do the crewcab?

• 
  @ModiconBob11 ай бұрын

  The previous owner added the additional part of the cab but it was a hack job. I had to redo most of it, added the hardtop (which I had to fabricate) and then did all of the other stuff myself. Thanks for the compliment!!!!!

• 
  @sly2392 Жыл бұрын

  sounds like a funny car at idle.

• 
  @ModiconBob11 ай бұрын

  Thanks!

• 
  @techman9634 Жыл бұрын

  How much would all this cost?

• 
  @ModiconBob Жыл бұрын

  Way more than the truck is worth! I wouldn't sell it for less than $40K...which is ridiculous...LoL!

• 
  @afitz6389 Жыл бұрын

  As a diehard Chrysler fan...I totally approve this video...she's a big block Ford...so move over and get out of the way!!!

• 
  @ModiconBob Жыл бұрын

  Haha

• 
  @paulmokidespaul5347 Жыл бұрын

  Sounds good!!!

• 
  @ModiconBob Жыл бұрын

  Thanks!

• 
  @JavierTorres-py6rp Жыл бұрын

  Beautiful engine.

• 
  @ModiconBob Жыл бұрын

  Thanks!

• 
  @jongerman4394 Жыл бұрын

  That’s just cool!! Nice job dude.

• 
  @ModiconBob Жыл бұрын

  Thanks!

• 
  @toddk1377 Жыл бұрын

  That's a beautiful deuce! Makes my deuce look like poo, lol, but you've put a lot of time and work into it. I want to make mine like that one day, lol.

• 
  @ModiconBob Жыл бұрын

  Thanks! You'll get it the way that you want soon!

• 
  @tomaszm715 Жыл бұрын

  Very nice truck 👌👍

• 
  @ModiconBob Жыл бұрын

  thanks!

• 
  @airwickyeager Жыл бұрын

  Can I make an offer on this engine?

• 
  @ModiconBob Жыл бұрын

  It's really not for sale, But I'd entertain a stupid high offer...Lol!!!

• 
  @N-Scale Жыл бұрын

  What a sweet ride. Sure it gets 28 MPG, LOL, but who cares !!!!

• 
  @ModiconBob Жыл бұрын

  Lol! About 10 MPG....

• 
  @N-Scale Жыл бұрын

  @@ModiconBob 3 better than my Tundra pulling my RV !!! Lucky Devil