I'm Paul from Mobile,Alabama join me as we talk fishing and RIP some lips. My specialty is redfish. Though I catch many species! Fishing has always been a passion of mine.I love sharing my adventures.
@@nealecole8768 yeah I ruined the shaft trying to get it out so I got another. If you are slick enough you could reuse the old shaft.
@dewbearb8383 күн бұрын
🦀🦀🦀🦀🤤🤤🤤🤤😋😋😋😋
@JohnWatsonPuppetChannel4 күн бұрын
Nice scenery
@AndrewXpress6 күн бұрын
How has the motor been after the update?
@251reeling95 күн бұрын
Working just fine tight control
@jimcreasey14216 күн бұрын
Thank you for the video. Worked like a charm! Saved me a few hundred at the shop.
@251reeling94 күн бұрын
Your welcome I hope it runs a while for you.
@georgeparson492612 күн бұрын
How can you tell what version is on the motor guide
@251reeling99 күн бұрын
Go to network /devices should show what version you have.
@georgeparson49269 күн бұрын
@@251reeling9 ..thanks
@stevenhayman941114 күн бұрын
Hi Paulo, what do you need to do if you have the hand and foot remotes. can the update be done for both remotes at the same time or do i need run the update twice???? kind regards Steve
@251reeling99 күн бұрын
The remote update should fix the foot as well.
@hookednrolling200917 күн бұрын
Hey Paul long time, good to see you all again. Garret is so tall now you going to have to stop feeding him. Lol boat is looking good. You have to start letting Garret drive the boat not on camera just in case something happens to you. My grandson is fifteen now. I get out of hospital day after father day. Start getting strength back. I got to do fiberglassing on inside of bilge and seal up generator stand and cover. I ordered all the fiberglass and resin. Good seeing you all again. Remember keep those lines tight and coolers full🇺🇸🇺🇸🐠🐟🎣🛥🌴🐢JT
@251reeling917 күн бұрын
Hey Capt J T thanks for the comment. I hope you finish your boat and get to enjoy it. Hopefully we get to go fishing more this year. Yeah I need to let garret load and unload more also. They grow up so fast.
@251reeling917 күн бұрын
I always enjoy boat repair videos
@edilsonadorno149021 күн бұрын
Hi Paulo, thanks for this information! My Xi5 is integrated with a Lowrance Elite FS 9 by Nmea 2000 and I'm facing some problems! 1) When I'm in anchor mode, the Sonar touch screen doesn't work; 2) When I select a fishing point on the remote control from 1 to 8, the Xi5 starts the path but then emits a long beep and stops; Anyway, I will update according to your instructions and I believe it will solve the problem! Unfortunately we do not have good support for these products in Brazil!
@251reeling919 күн бұрын
The problems you have described is exactly how mine behaved until I ran the update.
@251reeling919 күн бұрын
I ran mine yesterday and the anchorlock feature and simrad/Lowrance is working for the trolling feature as well.
@abnergarcia625223 күн бұрын
Great video! How can I tell which software version I currently have to know if I need the update or not?
@chrisbruce6525 күн бұрын
Can you run half of the sidevu on each screen?
@dewbearb838Ай бұрын
Thanks! Very informative.
@jonramas841Ай бұрын
Thank you!
@251reeling9Ай бұрын
Your welcome
@tommyjohnson17532 ай бұрын
Thanks for the information on the 45 cable!
@user-jc4yv7eg7c2 ай бұрын
Why is the Talica silver and the Torium that color. They’re both made of aluminum???
@AchikSarih3 ай бұрын
Merci beaucoup ❤❤❤❤
@svosprey3 ай бұрын
Fix and never buy motorguide again!
@richardsaiz47943 ай бұрын
The bottom metal gasket is different. I think new version
@jeremyf28703 ай бұрын
Awesome video. Any pointers on catching keeper trigger fish? I have been this year and cant get though the red snapper.
@FrostyGorillaYT3 ай бұрын
Wow, our shops been doing a two person way forever can't wait to show my boss this easy way.
@weekenddangler44903 ай бұрын
Are extetions required ? Can you not hook directly to battery?
@tuckersmith60863 ай бұрын
hey great video! i had a thought, could you pull the usb plug in the console out far enough to splice and run the wires to the back? might save having to remove the whole center console. looks like it could be fairly easy to fish them from the center console to the rear plug.
@allstaralex07763 ай бұрын
2 questions. So I have the Terrova and just got the LVS34 with the 93Sv and I don’t have to buy the cornfield mount? I can just put it on the side like you did? Also I bought the bundle so did the fish finder come with a transducer if it’s own that it runs off of when livescope isn’t on? Or does the livescope transducer run everything such as side imagining?
@rlmillercpa4 ай бұрын
I test drove a used ‘22 SR5 4x4 last month. I have to agree with the Eco = 4 cylinder, Normal = 6 cylinder analogy. I’m used to my ‘09 5.7L coming to life on demand, not after pushing buttons, turning dials, etc. Disappointing.
@noelmorales7164 ай бұрын
Thanks for this! helped me clean my spilled drink!
@andrewknowles8584 ай бұрын
We've had two XI5'S that have flooded the lower unit. Water had entered via the top unit which doesn't seem to be sealed sufficiently. The underside also tends to crack. We now fill the top of the shaft with silicone as well as joints. We also tape a plastic bag over the head whilst moving in rough conditions.
@MarshallLanier-oi1mk4 ай бұрын
I would add some struts to those compartment lids in order to hold them open. But those are easy enough for a dealer to install. Or the customer for that matter.
@WinniAdventures4 ай бұрын
Nice Video. You gave me an idea for my channel thanks
@DaleWyman5 ай бұрын
To power on this particular trolling motor do you simply deploy it? Thinking about getting a similar motor.
@fishingfool26446 ай бұрын
How old was the xi5? I'm thinking about getting one.
@fjbiden39976 ай бұрын
The reason why they put small turbo charged engines in trucks now is to improve emissions. They don’t really care about saving you gas money as much as you might think. All the tech to lower emissions is also why trucks are so expensive these days when you don’t actually seem to get anything for your money.
@alpburak126 ай бұрын
My father bought a boat and first day we got tour with the man who sold the boat. He demonstrated how to use motorguide via Simrad. After that we tried it on our own but autopilot didnt work. All the cable system is same. And i alsi tried all the switches but says bus off. Cant figured it out..
@alpburak126 ай бұрын
Maybe could you please show how to wire power switch? Don't understand any electrical things. The system is ready but can't turn bus off to on. I think we have problem with power switch..
@foxmd94108 ай бұрын
Absolutely ridicules this isn't wireless! WTF are these manufacturers doing?
@steveodonnell29218 ай бұрын
How difficult is your boat in reverse when it's windy or you're in current?
@251reeling98 ай бұрын
It will get blown around a little easier than fiberglass
@patrickread60128 ай бұрын
Thankyou for not making it a 45 min video. 2 thumbs up!
@251reeling98 ай бұрын
Your welcome 🙏
@F.A.R.T8 ай бұрын
holy! when that fish surfaced, I was like he's not going to fit in that net. well done!
@JohnAmes8 ай бұрын
awesome my friend big like
@daltonjohnson32898 ай бұрын
Caught 20 snapper in the canal 2 weekends ago biggest one was 4lbs 20 inches didn’t even keep the if they were under 14” all on a free line
@daltonjohnson32898 ай бұрын
Fought a jack in there a couple weeks ago for a 1hr 37 minutes and he chaffed the leader off was around a 40lber
@F.A.R.T9 ай бұрын
HI, found you through the comments section of Dpuck Fishing and Outdoors channel. wanted to stop by to check out your channel and show some support. subbed. way to get onto those flounders!
@251reeling98 ай бұрын
Ok I will check in on you thanks for stopping by.
@JohnAmes9 ай бұрын
Great video my friend great to see you back my friend 👍👍
@koryhouse28689 ай бұрын
I need help. I hooked everything up even a circuit breaker on the power side. I can’t get my trolling motor to work off my simrad go 7 he mentioned a switch from the NMEA 2000 to simrad but i don’t see how you add a switch between that cable to cut on last for it to work.
@walkwithmary58269 ай бұрын
like 11 🎉🎉🎉🎉❤❤❤❤❤❤❤❤❤❤❤
@tombusselle98449 ай бұрын
Did you check the wires that are plugged into the dummy slot for the inverter to see if they were getting power? Would save a lot of time and trouble if could use those instead.
@251reeling99 ай бұрын
I checked mine w ignition on and couldn't get anything
@251reeling99 ай бұрын
Not sure if I was doing it right 🤔
@DpuckFishingandOutdoors9 ай бұрын
Welcome back! I guess the right bait, nice and big, makes all the difference. Nice doormats, boys.
@251reeling99 ай бұрын
thanks Dpuck, its been a minute but that time has expired. Time to get to fishing.
@grahamcarruthers93379 ай бұрын
Would you normally expect the old steering fluid to be a different color to the new steering fluid.
@251reeling99 ай бұрын
I don't like it that's for sure. I got the brand and type recommended. So far no issues. I'm not sure what was put in originally.
@charlesgranger323129 ай бұрын
thanks
@251reeling99 ай бұрын
Your welcome sir
@drewbravo86839 ай бұрын
110 % about the bed step, rear charging ports and the tow hooks!!!!!!!!! What the Frack was Toyota thinking? For the price you pay, they need to really considerer those simple basic points as they are also the same in Canada!! All your points are absolutely correct, except the lane assist, mine is not as accurate as my corolla or responsive and I have a 2023 Tundra SR5 Sport . You covered a lot of similar l problems! All your points are very accurate and are the same in Canada. Yes, I LOVE Toyota, however, you bring up the same issues as I have found! Thank you so much for making this video, ....I am not alone.
@251reeling99 ай бұрын
Finally someone understands me..
@toddcarl17799 ай бұрын
Good video. Exactly what I'm trying to do with my boat. Was that 1/4" thick steel?
@251reeling99 ай бұрын
I think so
@Wiscobowhunt10 ай бұрын
After a couple years now how the boat holding up ?? I’m looking to buy one
@251reeling99 ай бұрын
It is holding up great . The price has went up on them now though.
Пікірлер
Does the old shaft have threads..??? Thank you
@@nealecole8768 yeah I ruined the shaft trying to get it out so I got another. If you are slick enough you could reuse the old shaft.
🦀🦀🦀🦀🤤🤤🤤🤤😋😋😋😋
Nice scenery
How has the motor been after the update?
Working just fine tight control
Thank you for the video. Worked like a charm! Saved me a few hundred at the shop.
Your welcome I hope it runs a while for you.
How can you tell what version is on the motor guide
Go to network /devices should show what version you have.
@@251reeling9 ..thanks
Hi Paulo, what do you need to do if you have the hand and foot remotes. can the update be done for both remotes at the same time or do i need run the update twice???? kind regards Steve
The remote update should fix the foot as well.
Hey Paul long time, good to see you all again. Garret is so tall now you going to have to stop feeding him. Lol boat is looking good. You have to start letting Garret drive the boat not on camera just in case something happens to you. My grandson is fifteen now. I get out of hospital day after father day. Start getting strength back. I got to do fiberglassing on inside of bilge and seal up generator stand and cover. I ordered all the fiberglass and resin. Good seeing you all again. Remember keep those lines tight and coolers full🇺🇸🇺🇸🐠🐟🎣🛥🌴🐢JT
Hey Capt J T thanks for the comment. I hope you finish your boat and get to enjoy it. Hopefully we get to go fishing more this year. Yeah I need to let garret load and unload more also. They grow up so fast.
I always enjoy boat repair videos
Hi Paulo, thanks for this information! My Xi5 is integrated with a Lowrance Elite FS 9 by Nmea 2000 and I'm facing some problems! 1) When I'm in anchor mode, the Sonar touch screen doesn't work; 2) When I select a fishing point on the remote control from 1 to 8, the Xi5 starts the path but then emits a long beep and stops; Anyway, I will update according to your instructions and I believe it will solve the problem! Unfortunately we do not have good support for these products in Brazil!
The problems you have described is exactly how mine behaved until I ran the update.
I ran mine yesterday and the anchorlock feature and simrad/Lowrance is working for the trolling feature as well.
Great video! How can I tell which software version I currently have to know if I need the update or not?
Can you run half of the sidevu on each screen?
Thanks! Very informative.
Thank you!
Your welcome
Thanks for the information on the 45 cable!
Why is the Talica silver and the Torium that color. They’re both made of aluminum???
Merci beaucoup ❤❤❤❤
Fix and never buy motorguide again!
The bottom metal gasket is different. I think new version
Awesome video. Any pointers on catching keeper trigger fish? I have been this year and cant get though the red snapper.
Wow, our shops been doing a two person way forever can't wait to show my boss this easy way.
Are extetions required ? Can you not hook directly to battery?
hey great video! i had a thought, could you pull the usb plug in the console out far enough to splice and run the wires to the back? might save having to remove the whole center console. looks like it could be fairly easy to fish them from the center console to the rear plug.
2 questions. So I have the Terrova and just got the LVS34 with the 93Sv and I don’t have to buy the cornfield mount? I can just put it on the side like you did? Also I bought the bundle so did the fish finder come with a transducer if it’s own that it runs off of when livescope isn’t on? Or does the livescope transducer run everything such as side imagining?
I test drove a used ‘22 SR5 4x4 last month. I have to agree with the Eco = 4 cylinder, Normal = 6 cylinder analogy. I’m used to my ‘09 5.7L coming to life on demand, not after pushing buttons, turning dials, etc. Disappointing.
Thanks for this! helped me clean my spilled drink!
We've had two XI5'S that have flooded the lower unit. Water had entered via the top unit which doesn't seem to be sealed sufficiently. The underside also tends to crack. We now fill the top of the shaft with silicone as well as joints. We also tape a plastic bag over the head whilst moving in rough conditions.
I would add some struts to those compartment lids in order to hold them open. But those are easy enough for a dealer to install. Or the customer for that matter.
Nice Video. You gave me an idea for my channel thanks
To power on this particular trolling motor do you simply deploy it? Thinking about getting a similar motor.
How old was the xi5? I'm thinking about getting one.
The reason why they put small turbo charged engines in trucks now is to improve emissions. They don’t really care about saving you gas money as much as you might think. All the tech to lower emissions is also why trucks are so expensive these days when you don’t actually seem to get anything for your money.
My father bought a boat and first day we got tour with the man who sold the boat. He demonstrated how to use motorguide via Simrad. After that we tried it on our own but autopilot didnt work. All the cable system is same. And i alsi tried all the switches but says bus off. Cant figured it out..
Maybe could you please show how to wire power switch? Don't understand any electrical things. The system is ready but can't turn bus off to on. I think we have problem with power switch..
Absolutely ridicules this isn't wireless! WTF are these manufacturers doing?
How difficult is your boat in reverse when it's windy or you're in current?
It will get blown around a little easier than fiberglass
Thankyou for not making it a 45 min video. 2 thumbs up!
Your welcome 🙏
holy! when that fish surfaced, I was like he's not going to fit in that net. well done!
awesome my friend big like
Caught 20 snapper in the canal 2 weekends ago biggest one was 4lbs 20 inches didn’t even keep the if they were under 14” all on a free line
Fought a jack in there a couple weeks ago for a 1hr 37 minutes and he chaffed the leader off was around a 40lber
HI, found you through the comments section of Dpuck Fishing and Outdoors channel. wanted to stop by to check out your channel and show some support. subbed. way to get onto those flounders!
Ok I will check in on you thanks for stopping by.
Great video my friend great to see you back my friend 👍👍
I need help. I hooked everything up even a circuit breaker on the power side. I can’t get my trolling motor to work off my simrad go 7 he mentioned a switch from the NMEA 2000 to simrad but i don’t see how you add a switch between that cable to cut on last for it to work.
like 11 🎉🎉🎉🎉❤❤❤❤❤❤❤❤❤❤❤
Did you check the wires that are plugged into the dummy slot for the inverter to see if they were getting power? Would save a lot of time and trouble if could use those instead.
I checked mine w ignition on and couldn't get anything
Not sure if I was doing it right 🤔
Welcome back! I guess the right bait, nice and big, makes all the difference. Nice doormats, boys.
thanks Dpuck, its been a minute but that time has expired. Time to get to fishing.
Would you normally expect the old steering fluid to be a different color to the new steering fluid.
I don't like it that's for sure. I got the brand and type recommended. So far no issues. I'm not sure what was put in originally.
thanks
Your welcome sir
110 % about the bed step, rear charging ports and the tow hooks!!!!!!!!! What the Frack was Toyota thinking? For the price you pay, they need to really considerer those simple basic points as they are also the same in Canada!! All your points are absolutely correct, except the lane assist, mine is not as accurate as my corolla or responsive and I have a 2023 Tundra SR5 Sport . You covered a lot of similar l problems! All your points are very accurate and are the same in Canada. Yes, I LOVE Toyota, however, you bring up the same issues as I have found! Thank you so much for making this video, ....I am not alone.
Finally someone understands me..
Good video. Exactly what I'm trying to do with my boat. Was that 1/4" thick steel?
I think so
After a couple years now how the boat holding up ?? I’m looking to buy one
It is holding up great . The price has went up on them now though.