Did you design the kart your self or is it loosely off KJ racing blueprint?
@darmbrosexcavationАй бұрын
I designed it by myself but took inspiration from several different people
@Doctor_BobbyАй бұрын
@@darmbrosexcavation very nice I got the plans for kj bent the frame tubes up and now it’s been sitting 2 years:( I need to finish it
@christianemmanuelf.domingo793Ай бұрын
Cool
@ThehorsepowerfarmАй бұрын
Where are you located? Maybe we could meet up for a crosskart snowmobile race&chat
@maoristereoАй бұрын
If this was always meant to be a road machine, why didnt you give the front suspension any positive caster?
@samboos8644Ай бұрын
He did you dont know what ur talkin about
@maoristereoАй бұрын
@@samboos8644 the swingarms are mounted paralel to the ground, that means 0º caster angle.
@LudovicPАй бұрын
@maoristereo that's not how it works
@landownersАй бұрын
I'm in Louisiana and we don't have any donor sleds locally. We just have jet skis galore but the crankshafts won't accept primary clutches. Do you have a source that will ship complete power plants?
@gofastdodgeАй бұрын
I'm in same boat... sorry for the pun. Have a seadoo 720 rotax that's raunchy.. trying to figure out drive train.. may weld a Polaris driver right to the pto. Or use pump shaft somehow. Using on narrow atv frame... good luck
@robloxrobloxandmoreroblox8322Ай бұрын
nice build, how does the radiator keep it cool?
@darmbrosexcavationАй бұрын
The radiator does work pretty well and keeps the temp under 180.
@samboos8644Ай бұрын
@@darmbrosexcavationfactual
@NeptuneSegaАй бұрын
I'd call it the death trap, love it!
@project.conquerorАй бұрын
Sick build!
@darmbrosexcavationАй бұрын
Thanks!
@JK-ov1sh7 ай бұрын
Nice bike i want it please
@williamsherman108911 ай бұрын
I'm surprised Grandma's not out there kickin' your butt for makin' ruts in her nice green beautiful yard 😅
@deborahchesser737511 ай бұрын
Crank case oil is for the transmission only, the crank is lubricated by the oil in the fuel.
@honestjason7854 Жыл бұрын
"good luck getting a bobcat to do this" then drives in 4 inches of snow. . . not even gonna finish the video
@georgecollord7650 Жыл бұрын
Tracks on my 2004 ASV RC 60 have started to wear. Not quite as good plowing snow anymore. Have 1100 hours on them. Thinking about carbide studs from iGrip
@alsaku33 Жыл бұрын
Get that saw out of that man’s hands! Dangerous!
@fienchensucks Жыл бұрын
What are the A-arms from? Did you build them?
@darmbrosexcavation Жыл бұрын
They are from a 2005 Honda trx450r
@vicslick122000 Жыл бұрын
I remember when I got my first skid loader… 😅
@darrylbusch3058 Жыл бұрын
Couldn't you have saved a lot of money by just replacing the pump and not the motor?
@theoneonlymonkeymanohyea6769 Жыл бұрын
I could do that in my cat easy 💀
@ThisOldYota Жыл бұрын
Hell yeah!
@mikedarminio3162 Жыл бұрын
Video was great , the trees look to me to be ash !
@poffandsons Жыл бұрын
Keep the excavation videos going bud! Good Luck!
@mwhite6820 Жыл бұрын
I know this is old but have you ever removed any of the jets from this tub? Mine has a really big one that needs to come out.
@darmbrosexcavation Жыл бұрын
No I have not
@PeteyPablo2770 Жыл бұрын
dude your in like 4 inches of snow.... my lawn mower could get through that.
@lineman860 Жыл бұрын
Bfd
@emorycundick1904 Жыл бұрын
ᴘʀᴏᴍᴏsᴍ
@dmidura72822 жыл бұрын
There is a way to purge the joystick hydro lines. That will typically solve the delayed controls.
@dmidura72822 жыл бұрын
Locate the first 4 hydro lines under left joystick there are I believe 6 in total. First 2 are forward, 2nd 2 are backwards. Pull the first 2. Crack middle 2. Creep in reverse to purge stagnant oil out and any air. Re-tighten middle two lines. Re-attach front 2 lines and crack them and now creep forward to purge them. Then re-tighten. Oil will likely be dirty since it is stagnant.
@zonnabyers13972 жыл бұрын
its a KDX200 not a 250
@ayanish55 ай бұрын
How to tell the difference
@abdoudz32852 жыл бұрын
Good luck bro 👌
@derek65802 жыл бұрын
Looking to sell it?
@David.-_-2 жыл бұрын
We've had ours about the same. The pump seized on me
@steventackett30372 жыл бұрын
Can you add where you purchased the replacement pump from? Thank you!
@David.-_-2 жыл бұрын
I've looked at them for a second 140us or around there. Multiple sellers on the "LS100 pump."
@nikoarchon42122 жыл бұрын
just picked one up today 650 with title running with light
@sausage4082 жыл бұрын
It’s not even deep at all my 1845c with grouser tracks will go through that like nothing.
@williamsherman10892 жыл бұрын
Neat old bike kid and great job fixin' it up, if that was your dad I'm sure he's proud. Lol careful on those start's though!
@zm15802 жыл бұрын
I have the exact same tub and problem but having trouble figuring out which pump to order, any chance you have a link or any info on it?
@blackpepe2 жыл бұрын
how you lift the cab
@minidiggin2 жыл бұрын
This means nothing any tracked or wheeled skid with a decent set of tread would run that course.
@psd282 жыл бұрын
Makes a weird sound at startup
@bennyhill57752 жыл бұрын
Hot tubs should last 15-20 years before problems.
@mikematthews85732 жыл бұрын
Change out the Fork oils, and dont ride without Air Filter!
@dumptrump91342 жыл бұрын
What a clown . My skid steer will do that all day long .what a chump
@GarrettWilliams20172 жыл бұрын
With the factory C pattern tracks no a bobcat wouldn’t do this. With the multi bar tracks it would no problem
@gamerfarms93622 жыл бұрын
I could do that every day with any skidloader
@raybankes76682 жыл бұрын
that machine is able to do so much more than this video.
@wannabejeeper2 жыл бұрын
Well that's one way to keep the piles from building up! LOL Of course, with tracks you can probably ramp up the piles and dump on the back side. I used to have tracks on my four-wheeler and would do this.
Пікірлер
Good job guy.🇧🇷🇧🇷
What rear end did you use?
@KJRaycing I used your plans, they worked great!
How did you do the cinematic lighting/color?
Есть чертеж?
Sweet ride!
Did you design the kart your self or is it loosely off KJ racing blueprint?
I designed it by myself but took inspiration from several different people
@@darmbrosexcavation very nice I got the plans for kj bent the frame tubes up and now it’s been sitting 2 years:( I need to finish it
Cool
Where are you located? Maybe we could meet up for a crosskart snowmobile race&chat
If this was always meant to be a road machine, why didnt you give the front suspension any positive caster?
He did you dont know what ur talkin about
@@samboos8644 the swingarms are mounted paralel to the ground, that means 0º caster angle.
@maoristereo that's not how it works
I'm in Louisiana and we don't have any donor sleds locally. We just have jet skis galore but the crankshafts won't accept primary clutches. Do you have a source that will ship complete power plants?
I'm in same boat... sorry for the pun. Have a seadoo 720 rotax that's raunchy.. trying to figure out drive train.. may weld a Polaris driver right to the pto. Or use pump shaft somehow. Using on narrow atv frame... good luck
nice build, how does the radiator keep it cool?
The radiator does work pretty well and keeps the temp under 180.
@@darmbrosexcavationfactual
I'd call it the death trap, love it!
Sick build!
Thanks!
Nice bike i want it please
I'm surprised Grandma's not out there kickin' your butt for makin' ruts in her nice green beautiful yard 😅
Crank case oil is for the transmission only, the crank is lubricated by the oil in the fuel.
"good luck getting a bobcat to do this" then drives in 4 inches of snow. . . not even gonna finish the video
Tracks on my 2004 ASV RC 60 have started to wear. Not quite as good plowing snow anymore. Have 1100 hours on them. Thinking about carbide studs from iGrip
Get that saw out of that man’s hands! Dangerous!
What are the A-arms from? Did you build them?
They are from a 2005 Honda trx450r
I remember when I got my first skid loader… 😅
Couldn't you have saved a lot of money by just replacing the pump and not the motor?
I could do that in my cat easy 💀
Hell yeah!
Video was great , the trees look to me to be ash !
Keep the excavation videos going bud! Good Luck!
I know this is old but have you ever removed any of the jets from this tub? Mine has a really big one that needs to come out.
No I have not
dude your in like 4 inches of snow.... my lawn mower could get through that.
Bfd
ᴘʀᴏᴍᴏsᴍ
There is a way to purge the joystick hydro lines. That will typically solve the delayed controls.
Locate the first 4 hydro lines under left joystick there are I believe 6 in total. First 2 are forward, 2nd 2 are backwards. Pull the first 2. Crack middle 2. Creep in reverse to purge stagnant oil out and any air. Re-tighten middle two lines. Re-attach front 2 lines and crack them and now creep forward to purge them. Then re-tighten. Oil will likely be dirty since it is stagnant.
its a KDX200 not a 250
How to tell the difference
Good luck bro 👌
Looking to sell it?
We've had ours about the same. The pump seized on me
Can you add where you purchased the replacement pump from? Thank you!
I've looked at them for a second 140us or around there. Multiple sellers on the "LS100 pump."
just picked one up today 650 with title running with light
It’s not even deep at all my 1845c with grouser tracks will go through that like nothing.
Neat old bike kid and great job fixin' it up, if that was your dad I'm sure he's proud. Lol careful on those start's though!
I have the exact same tub and problem but having trouble figuring out which pump to order, any chance you have a link or any info on it?
how you lift the cab
This means nothing any tracked or wheeled skid with a decent set of tread would run that course.
Makes a weird sound at startup
Hot tubs should last 15-20 years before problems.
Change out the Fork oils, and dont ride without Air Filter!
What a clown . My skid steer will do that all day long .what a chump
With the factory C pattern tracks no a bobcat wouldn’t do this. With the multi bar tracks it would no problem
I could do that every day with any skidloader
that machine is able to do so much more than this video.
Well that's one way to keep the piles from building up! LOL Of course, with tracks you can probably ramp up the piles and dump on the back side. I used to have tracks on my four-wheeler and would do this.