Hi, how do you take of the spline from the top part?
@mightynomak42052 ай бұрын
Hello, I have the same corsa c colum but mine is tilted. Need to shorten it a bit but not sure where to do it. I have barely space between the pedals and the gearshift also runs behind the steer😵💫. I am trying to fit this to a motor home fiat ducato 1990.
@msinclair8102 ай бұрын
I only use the base model Corsa columns which are not tilting and easier to mount. Not a good idea to modify the column but if you have to, do it at the bottom.
@Daimi2503 ай бұрын
I have the same powersteeringbox on my daimler v8 250 but have a normal steeringbox but it diddend fit , witch steeringbox did you use then?
@jesushernaninostrozasoto83664 ай бұрын
Hola que tal como se hace la conexión electrica
@anthonyburdett21674 ай бұрын
I’ve just fitted a Corsa C unit to my 1950 F1 pickup truck and used the controller from the guy in Portugal. I wired it as per his instructions but it doesn’t work. I’ve fed current directly to the motor and this works, is there a way I can check the ECU to determine if this is faulty or if it’s the control. Thanks Tony
@mightynomak42052 ай бұрын
Hi, I’m waiting also for my package from Portugal. Anyway I can reach you? Would love to hear your experience as I’m planning to this also.
@jacekcieslinski55364 ай бұрын
Co to za moduł
@Jkan05 ай бұрын
Hello good day, can I put this corsa controller in a steering wheel of a Chevrolet beat? Or can you tell me which controller I can adapt, thank you very much
@brianf92225 ай бұрын
All I can hear are birds
@markmathews68766 ай бұрын
but what does it steer like ??
@mikekalikot8 ай бұрын
Good morning sir.. asking that module can be used in EPS with can bus? Like nissan kicks EPS thank you
@msinclair8108 ай бұрын
Sorry don't know, I've only fitted them to classic cars with no CANBUS.
@danielcarden13049 ай бұрын
Hello! Does it fit classic cars? I have a '69 Plymouth Duster, and I would like to know if it is adaptable to that model, thank you very much!
@msinclair8109 ай бұрын
Fits in the column so can go on any car,.
@donwest538710 ай бұрын
vise-grip
@mawe524611 ай бұрын
Where do you get the module for Speed Emulation in Europe? Thank
@jamesfletcher8566 Жыл бұрын
How is the 25/30 coming on
@vincentvieluf7667 Жыл бұрын
why can't in live next door to this man??? I don't know anyone with this knowledge or a 3d printer.
@floringhetu4005 Жыл бұрын
Nice.job. cam you tell me the exact model of the power steering are you using? I'm trying to find the model with right side electric motor like yours but with no succes. It is from a right steering car?
@msinclair810 Жыл бұрын
Vauxhall Corsa C 2000-2006 or Opel equivalent
@tyabrahamse2461 Жыл бұрын
Thanks for the video. Do you remember the name of the aftermarket module that communicates with the ECU. I need to get one for my build and I'm using an NSK j500 ECU that goes with a vw fitted electric power steering unit. 3 wires for communication.
@dogstraining9970 Жыл бұрын
I have a problem with installing the same device Could you help me
@danielloureiro1952 Жыл бұрын
Hello . Can anyone tell me where can i buy that "bypass" " adapter that tricks the ecu ". Preference a place like AliExpress or where i can ship to Portugal . Thks
@crazygeorgelincoln Жыл бұрын
Hope it's better than the meriva stock unit.
@fulkramason4558 Жыл бұрын
Can anyone tell me where I can purchase this unit?
@cornelisoui6367 Жыл бұрын
Nul
@danielroybirchall21182 жыл бұрын
Hi trying to find one of the can modules where could I find one thanks
@msinclair8102 жыл бұрын
Plenty on ebay, eg: www.ebay.co.uk/itm/284408335748?hash=item42380ecd84:g:DEUAAOSwNYlhWe4a
@karthikeyan24692 жыл бұрын
My car eps same g4 eps system problem is some time on some time pwr steering hard what problem
@mariopreisich75762 жыл бұрын
Great job. Now i understan how can modify my car
@johnroygeralde73252 жыл бұрын
Can you make a video on how you wired the potentio meter to the speed sensor? Thanks
@rhexdelacruz3313 Жыл бұрын
Hi did you get answer to your question? I want to know also how to connect speed controller
@TheSspcrazy Жыл бұрын
@@rhexdelacruz3313 me too
@marianradu71052 жыл бұрын
I want the scheme too, please
@jeriessam482 жыл бұрын
Could you please help me with the name of the adapter please
Hello, how are you, what is the name of that adapter and the enhancer? What model is it and how much is it and where can I buy it? I want to buy them but I don't know how to find it, if someone can help me, thank you very much.
Hi, What were the updated valves that you fitted? Kind regards, John
@msinclair8102 жыл бұрын
Mercedes 190E W201 4cylinder 1984-93. Inlet 43mm 1020531601, exhaust 39mm 1020500327. Also requires standard valve collets and caps, reaming of guides to metric 8/9mm and relapping of seats. Better and slightly bigger valves at a fraction of the cost of replacement Derby valves and guides.
@johnlandells96302 жыл бұрын
@@msinclair810 Thanks for the information!
@tonymontana43492 жыл бұрын
Hi I have that same setup yet I’m trying to figure out how to have an djustble
@@msinclair810 Thankyou so much. one more thing please- Will it work with every control unit? I have Kia Storage power steering assembly.
@hyfavey2 жыл бұрын
Nice demonstration. Actually working with an exact same unit these day with goal of RC steering for a full-size quad. I’m probably gonna discard the control unit and just buy a new dc motor driver and hack the angular sensor. Can update on my channel when I have something to show (within the next month or so).
@darrenslater28162 жыл бұрын
Hi Im attempting the same conversation on my mk2 jag I’ve just approached moto lita regards a boss they have quoted me £750 plus vat etc if you worked out a cheaper alternative I would be grateful for any advice.
@msinclair8102 жыл бұрын
You need a Momo MA6610R adaptor for a Corsa C which is around £70 new and then any 6 bolt aftermarket steering wheel. www.ebay.co.uk/itm/262348901667?epid=16028221438&hash=item3d15368d23:g:~DEAAOSwylhb6vCz OMP do a similar one.
@darrenslater28162 жыл бұрын
Thank you so much 😊
@Plemeister4 ай бұрын
How did you get a 9 bolt to fit to the corsa wheel? Also what did you do for the horn?
@darrenslater28164 ай бұрын
Hi its still not fitted yet I’m doing a full rebuild, but I’ve cut both shafts & welded a sleeve over so it has the correct splines etc, a fair bit of cutting under the dash is required, regarding the horn that will be on the stalk
@fiestaclass-t09322 жыл бұрын
Good morning friend, I'm Brazilian, I'm adapting an electric steering kit in my car, my friend I need help, I saw that you use a potentiometer to regulate the direction, would you like to give me the electrical diagram God bless your life
Thats not a 1963 Australian ford falcon steering column!
@estebanmarinojr833 жыл бұрын
Simplified explanation about eps wiring. Would you please give me what kind of adaptor you put in three wire? (Ignition, vehicle and motor speed sensors? Thanks jun from philippines
@msinclair8103 жыл бұрын
Plenty of controllers on ebay: www.ebay.co.uk/itm/142463712424?hash=item212b7fbca8:g:GD4AAOSw9TRfvrFP
@estebanmarinojr833 жыл бұрын
Thank you sir Martin. Your information is a big help for me. Now I know where to buy ecu controllers.
@zulualfa4203 жыл бұрын
Hi sir.. Can I buy full setup as your?
@harrymarsden30903 жыл бұрын
Loverly video
@halconxtra76403 жыл бұрын
Great job .! Congratulations ! Does not need CAN connections ?
@whydotufaqoff3 жыл бұрын
Thanks, going to fit one to my sierra p100. We forget just how heavy the steering was on these old cars!... 🚗 ...👍
@boboypalaboy36433 жыл бұрын
Wiring installation diagram pls.. Same with my eps module..
@pakiengr.8963 жыл бұрын
Thanks for video...
@wengcanezocrizaldoiiitv24863 жыл бұрын
Can it be install on 1990 model Hyundai Porter,? It's a complete mechanical or manual type sir
@msinclair8103 жыл бұрын
So long as there is space for the motor under the dash, it should be possible.
@michaelmulle81103 жыл бұрын
Hello, great video by the way... I just want ask a quick question. The red cable you’ve got connected to the battery with the clips. Where would you connect that red ignition cable when you’ve installed the whole power steering unit in car? Thanks, Mike
@msinclair8103 жыл бұрын
The thin low current red wire goes to an ignition on positive, the thick red goes to a high current battery positive supply (such as starter solenoid) via a 30 or 40 Amp fuse.
@michaelmulle81103 жыл бұрын
Thank you
@anglosaxon16223 жыл бұрын
2013 Hyundai Santa Fe Sport. Very cold this morning -20C and the EPS warning light on when car started (easily). Warmed up the interior and some heat to the engine compartment. Ignition off and then back on, EPS warning light cleared, steering normal. Solid state electronics better than liquid steering pump???
@msinclair8103 жыл бұрын
No reason why electronics don't work at low temp (high temp can be a problem). More likely battery voltage was a bit low after cold starting and system disabled itself until voltage came back up once alternator had run for a minute or 2
@peteashby77163 жыл бұрын
@@msinclair810 Maybe. This morning -15'C in garage, block heater and battery warmer not used today but car starts promptly. EPS light went out quickly and steering loose ready to go! Mysterious. So maybe switch off after a long warm up and then restart should clear it.
Пікірлер
Hi, how do you take of the spline from the top part?
Hello, I have the same corsa c colum but mine is tilted. Need to shorten it a bit but not sure where to do it. I have barely space between the pedals and the gearshift also runs behind the steer😵💫. I am trying to fit this to a motor home fiat ducato 1990.
I only use the base model Corsa columns which are not tilting and easier to mount. Not a good idea to modify the column but if you have to, do it at the bottom.
I have the same powersteeringbox on my daimler v8 250 but have a normal steeringbox but it diddend fit , witch steeringbox did you use then?
Hola que tal como se hace la conexión electrica
I’ve just fitted a Corsa C unit to my 1950 F1 pickup truck and used the controller from the guy in Portugal. I wired it as per his instructions but it doesn’t work. I’ve fed current directly to the motor and this works, is there a way I can check the ECU to determine if this is faulty or if it’s the control. Thanks Tony
Hi, I’m waiting also for my package from Portugal. Anyway I can reach you? Would love to hear your experience as I’m planning to this also.
Co to za moduł
Hello good day, can I put this corsa controller in a steering wheel of a Chevrolet beat? Or can you tell me which controller I can adapt, thank you very much
All I can hear are birds
but what does it steer like ??
Good morning sir.. asking that module can be used in EPS with can bus? Like nissan kicks EPS thank you
Sorry don't know, I've only fitted them to classic cars with no CANBUS.
Hello! Does it fit classic cars? I have a '69 Plymouth Duster, and I would like to know if it is adaptable to that model, thank you very much!
Fits in the column so can go on any car,.
vise-grip
Where do you get the module for Speed Emulation in Europe? Thank
How is the 25/30 coming on
why can't in live next door to this man??? I don't know anyone with this knowledge or a 3d printer.
Nice.job. cam you tell me the exact model of the power steering are you using? I'm trying to find the model with right side electric motor like yours but with no succes. It is from a right steering car?
Vauxhall Corsa C 2000-2006 or Opel equivalent
Thanks for the video. Do you remember the name of the aftermarket module that communicates with the ECU. I need to get one for my build and I'm using an NSK j500 ECU that goes with a vw fitted electric power steering unit. 3 wires for communication.
I have a problem with installing the same device Could you help me
Hello . Can anyone tell me where can i buy that "bypass" " adapter that tricks the ecu ". Preference a place like AliExpress or where i can ship to Portugal . Thks
Hope it's better than the meriva stock unit.
Can anyone tell me where I can purchase this unit?
Nul
Hi trying to find one of the can modules where could I find one thanks
Plenty on ebay, eg: www.ebay.co.uk/itm/284408335748?hash=item42380ecd84:g:DEUAAOSwNYlhWe4a
My car eps same g4 eps system problem is some time on some time pwr steering hard what problem
Great job. Now i understan how can modify my car
Can you make a video on how you wired the potentio meter to the speed sensor? Thanks
Hi did you get answer to your question? I want to know also how to connect speed controller
@@rhexdelacruz3313 me too
I want the scheme too, please
Could you please help me with the name of the adapter please
www.ebay.co.uk/itm/284402148325?hash=item4237b063e5:g:bcIAAOSwK3thWfSh
@@msinclair810 thank you so much
Hello, how are you, what is the name of that adapter and the enhancer? What model is it and how much is it and where can I buy it? I want to buy them but I don't know how to find it, if someone can help me, thank you very much.
www.ebay.co.uk/itm/251838446769?hash=item3aa2bdbcb1:g:HGYAAOSwPzpZda1d
Hi, What were the updated valves that you fitted? Kind regards, John
Mercedes 190E W201 4cylinder 1984-93. Inlet 43mm 1020531601, exhaust 39mm 1020500327. Also requires standard valve collets and caps, reaming of guides to metric 8/9mm and relapping of seats. Better and slightly bigger valves at a fraction of the cost of replacement Derby valves and guides.
@@msinclair810 Thanks for the information!
Hi I have that same setup yet I’m trying to figure out how to have an djustble
www.ebay.co.uk/itm/322372412305?hash=item4b0ee4a391:g:O60AAOSwxp9W6nQs
Hi can you provide link for adapter to trick ecu I mean we're to buy am in southafrica
www.ebay.co.uk/itm/322372412305?hash=item4b0ee4a391:g:O60AAOSwxp9W6nQs
sir what is the name of the adapter you can use to the eps module and where i can buy thank you
Please send the link of the adaptor you are using.
www.ebay.co.uk/itm/284402148325?hash=item4237b063e5:g:bcIAAOSwK3thWfSh
@@msinclair810 Thankyou so much. one more thing please- Will it work with every control unit? I have Kia Storage power steering assembly.
Nice demonstration. Actually working with an exact same unit these day with goal of RC steering for a full-size quad. I’m probably gonna discard the control unit and just buy a new dc motor driver and hack the angular sensor. Can update on my channel when I have something to show (within the next month or so).
Hi Im attempting the same conversation on my mk2 jag I’ve just approached moto lita regards a boss they have quoted me £750 plus vat etc if you worked out a cheaper alternative I would be grateful for any advice.
You need a Momo MA6610R adaptor for a Corsa C which is around £70 new and then any 6 bolt aftermarket steering wheel. www.ebay.co.uk/itm/262348901667?epid=16028221438&hash=item3d15368d23:g:~DEAAOSwylhb6vCz OMP do a similar one.
Thank you so much 😊
How did you get a 9 bolt to fit to the corsa wheel? Also what did you do for the horn?
Hi its still not fitted yet I’m doing a full rebuild, but I’ve cut both shafts & welded a sleeve over so it has the correct splines etc, a fair bit of cutting under the dash is required, regarding the horn that will be on the stalk
Good morning friend, I'm Brazilian, I'm adapting an electric steering kit in my car, my friend I need help, I saw that you use a potentiometer to regulate the direction, would you like to give me the electrical diagram God bless your life
www.ebay.co.uk/itm/284402148325?hash=item4237b063e5:g:bcIAAOSwK3thWfSh
Good demo! Thanks for sharing.
Thats not a 1963 Australian ford falcon steering column!
Simplified explanation about eps wiring. Would you please give me what kind of adaptor you put in three wire? (Ignition, vehicle and motor speed sensors? Thanks jun from philippines
Plenty of controllers on ebay: www.ebay.co.uk/itm/142463712424?hash=item212b7fbca8:g:GD4AAOSw9TRfvrFP
Thank you sir Martin. Your information is a big help for me. Now I know where to buy ecu controllers.
Hi sir.. Can I buy full setup as your?
Loverly video
Great job .! Congratulations ! Does not need CAN connections ?
Thanks, going to fit one to my sierra p100. We forget just how heavy the steering was on these old cars!... 🚗 ...👍
Wiring installation diagram pls.. Same with my eps module..
Thanks for video...
Can it be install on 1990 model Hyundai Porter,? It's a complete mechanical or manual type sir
So long as there is space for the motor under the dash, it should be possible.
Hello, great video by the way... I just want ask a quick question. The red cable you’ve got connected to the battery with the clips. Where would you connect that red ignition cable when you’ve installed the whole power steering unit in car? Thanks, Mike
The thin low current red wire goes to an ignition on positive, the thick red goes to a high current battery positive supply (such as starter solenoid) via a 30 or 40 Amp fuse.
Thank you
2013 Hyundai Santa Fe Sport. Very cold this morning -20C and the EPS warning light on when car started (easily). Warmed up the interior and some heat to the engine compartment. Ignition off and then back on, EPS warning light cleared, steering normal. Solid state electronics better than liquid steering pump???
No reason why electronics don't work at low temp (high temp can be a problem). More likely battery voltage was a bit low after cold starting and system disabled itself until voltage came back up once alternator had run for a minute or 2
@@msinclair810 Maybe. This morning -15'C in garage, block heater and battery warmer not used today but car starts promptly. EPS light went out quickly and steering loose ready to go! Mysterious. So maybe switch off after a long warm up and then restart should clear it.
Thanx a lot
the name of that adptor
www.ebay.co.uk/itm/Corsa-B-C-Kit-Electric-power-steering-controller-box-With-ECU-plug-EPAS/142463712424?hash=item212b7fbca8:g:GD4AAOSw9TRfvrFP