Nice video! Hope she runs from Hartenbos to George soon (or maybe even the full MosselBay to Knysna route like the Choo Tjoe used to do 👀)
@stickmouse3865Ай бұрын
Probably the nicest examiner that has ever existed.
@kil4Ай бұрын
Funny thing in new manual from asus its A2 B2 :)
@zyonhamilton4637Ай бұрын
Ima be honest it’s late n i don’t have to watch the whole thing do yo lose everything after the reset?
@SSZaris9 күн бұрын
No you don't lose anything. However your gun and ship will get a lot of damaged parts. Switch to a basic ship and gun before you choose and it makes it super simple to fix then you can go back to your normal stuff after. Reset is the correct choice. You don't lose anything
@Fayad1524Ай бұрын
I am stuck in a loop on this mission. Almkst considering starting over unless if somebody has a work around it.
@SamuelModise-oq6jn2 ай бұрын
Born and raised Qwaqwa never been in this mountain I wish to go there 1 day but the stories are too scary,as for climbing that chain ladder it's a big no 😅 for me
@alpaci99142 ай бұрын
its okey thanks e lot brother
@mattvanelli8172 ай бұрын
ASRock Tiachi z690, Gskill Ripjaws DDR5-6000, i7-13700k.... No matter what I do, my ram will not run at anything other than 3000. Literally nothing works. This PC has been built, at the time of writing this, for 5 days.
@KichigaiUsagi2 ай бұрын
I finished the Atlas path / Purge and reset the simulation....NEVER got the choice of a new type of galaxy.....just moved onto Atlas Eternal......more endless wasting of time.
@NicholasBoyerFineArt2 ай бұрын
I’m glad I found this jsut bought some new ddr5 at 8000 and I was getting 4000 in a1 b1. I’m excited to try this I’m missing half my ram’s capabilities
@silkee3 ай бұрын
Wow. Been trying for a week to get my DDR5 working and then just came across this video. Worked first time. I did the same as a lot of people, I assumed the mobo wants it in A1/B1 but the manual says otherwise after re-reading it after this video. I bought some expensive 6400 Trident Z5 which wouldn't even post above 4600. Now it just booted straight into 6400 no problems. Thought I was going to have to return the RAM. ROG STRIX Z790-A GAMING WIFI, 14700kf
@observer84303 ай бұрын
so it wasn't worth it
@arturguidugli28493 ай бұрын
Like, like, like... ty!
@venkolessle98803 ай бұрын
Did my test today and failed because I did my lane change too early. The guy said that I’m supposed to change lane only after C
@Deelabit3 ай бұрын
I've gone though a dozen videos looking for the fix, your video with the simplest solution is the one that worked
@Khungersumit3 ай бұрын
having same problem, withn Z790, 3 G.skills DDR5 sticks 16,32 and 16GB (slots used 12,4) not able to enable XMP. currently running at speed of 4000MHZ
@felanimaseko67064 ай бұрын
Which driving school teaches bike
@felanimaseko67064 ай бұрын
Where to be tested wt a a bike
@junioramaurypenamiliano82554 ай бұрын
bro thanks a lot for you advice
@saranyanaganathan4 ай бұрын
Which place in mossel bay South Africa
@maanomavunga13545 ай бұрын
Thanks, am going for my test this coming week
@juangreeff21195 ай бұрын
When u stop do u put ur stand down or just ur leg?
@maximedml74185 ай бұрын
I can't find the by per PMICs option, i have Asus B650 prime plus. Help me !
@dr.hannibal83384 ай бұрын
I think that’s for Intel CPUs only? Idk i have 7900x3d x670e and can’t find it either
@maximedml74184 ай бұрын
@@dr.hannibal8338 if its the case its sad
@akrider1745 ай бұрын
In the z790 manual it states a2/b2 main slots so well you now in the slots they are meant for
@ronrote5 ай бұрын
Thanks
@dayted5 ай бұрын
thank you so much worked on my 790 Eva !
@jedisdad22655 ай бұрын
Chock full of Great White “Tax Collectors”
@TheChampFactory6 ай бұрын
Very helpful I want to start with lessons, soon
@gjurov13_206 ай бұрын
Great tutorial it fixed my problem
@miliselamafumana30106 ай бұрын
Great video! On the left turns 2:21 are you allowed to do clutch control/friction zone to take the 2 turn? Especially the 2nd one at 2:34
@Lego-Adventures6 ай бұрын
The second turn is directly after a stop, so you will have to stop first and then take the turn while pulling away.
@gamingtube84856 ай бұрын
It not start up after finished?
@brentwarren52537 ай бұрын
Awesome, video. Thanks for make it. I passed my test on my first attempt on my GS 700.
@Lego-Adventures7 ай бұрын
You are most welcome and congratulations!
@T-god2620 күн бұрын
@@Lego-Adventures i am hopping on because i am writing on saturday because the serverr was down on my day, could help guys with some Q&A of the learnes or share a pdf i can read. My guess is eveything is the same except the controls and movements, please assist as soon as you can i will come back tomorrow around 9ish
@trancephile24127 ай бұрын
Thank you so much , i was using slot A1 and B1 and i couldn't use xmp profile, so when i switched to slot A2 and B2 the problem solved
@Lego-Adventures7 ай бұрын
You are most welcome! Thank you for the positive feedback!
@HohaHola77 ай бұрын
0:37 you meant different systems, right? Not different Galaxies like, for example. from the Euclid Galaxy (starting gal.) to other 15 i hope...
@Lego-Adventures7 ай бұрын
Yes, thank you for the respectful correction.
@HohaHola77 ай бұрын
@@Lego-Adventures you're welcome my friend, keep up the good work and have a nice new year! ❤️
@konys16667 ай бұрын
Excellent video. I watched it over and over and I passed my test today - first time. Thank you!
@Kumodot7 ай бұрын
I was using 2x32Gb Vengeance 6400 CL32 for a while perfectly using it at 6000Ghz stable. Now i finally bought other 2 blades of the same to have a total of 128Gb, and wasnt able to boot the Pc Anymore (Updated to latest Msi Bios updates before putting the blades), got it to boot to bios perfectly and showed full RAM, then after booting again, never POST anymore. I had to remove two blades physically and down the speed to 4000Ghz and have them to boot to windows. What a hell! I am gonna try watching your video now for some options.
@Lego-Adventures7 ай бұрын
Please let us know if it works for you or not. Also, try downgrading the BIOS to the version that worked previously.
@peschpit7 ай бұрын
Good Video, Thank you.
@giorgiobellia89728 ай бұрын
Hi, thanks for your support. In the boot menu I don't have VDD and VDDQ but VDD2 and VDDQ. Also, I can't find the setting PMIC Voltage but many settings for sync or split voltage settings. My motherboard is Gigabyte Z790 Gaming X AX and I use 4 sticks of Kingston Fury RGB 16gb 5600hz. Can you help me? Thanks!
@erikjarl93617 ай бұрын
Any solution? Have the same problem whit a Gigabyte UD AX, but whit 2 sticks. When trying whit XMP profile, it's stuck on boot. 4800mhz will only work, but the sticks is at 6000mhz.
@giorgiobellia89727 ай бұрын
@@erikjarl9361 With 2 5600hz sticks I had no problems with XMP 1 (5600) profile active - Now that I have 4, I have managed, for now, to be stable with the XMP 2 profile active at 5200hz. Unfortunately, as I said, I don't know exactly what to change during boot because the entries on voltage are numerous and different from those in this video.
@yusufh-ug1tt8 ай бұрын
i finished the atlas path and now what do i do cos there are no missions for me to do
@qalmed8 ай бұрын
Wow, thank you so much it worked!!!
@krix20078 ай бұрын
Man you are great 👍 finally my ram is working on full speed. Thanks
@Blaze_5568 ай бұрын
got this to work for my 2 sticks of 16gb ram not enabling xmp on my asus z790-p mobo. switched ram stick to slots a2/b2, went into bios and changed to xmp 1 , saved and restarted and it fired right up. thank you for the video.
@user-eq7tg1dp9o8 ай бұрын
Thanks brah, dit het gehelp! Dankie man.
@sirenia7558 ай бұрын
what would happen if i made a 2nd heart of the sun before I do the dream of the deep and The Purge !.
@MrSteelerod8 ай бұрын
My mobo calls for a2 b2 configuration, does that mean i should try a1 b1? Im running g.skill flare5 6000 ddr 5 2x32 with a ryzen 9 7900x on a b650e-f. When i turn on EXPO and set it to 6000 it wont post but when i dial back to 5800 it will.
@PlXELPUNK9 ай бұрын
CORSAIR VENGEANCE DDR5 RAM running in XMP at 6600MHz thanks to you! I can't believe I have spent so much time troubleshooting this.
@Aaroncoop916210 ай бұрын
Im tired of struggling to start quests in this game. I think Im done..
Пікірлер
This did it for me
this the only video works for me thanks
Worst community of making videos
Nice video! Hope she runs from Hartenbos to George soon (or maybe even the full MosselBay to Knysna route like the Choo Tjoe used to do 👀)
Probably the nicest examiner that has ever existed.
Funny thing in new manual from asus its A2 B2 :)
Ima be honest it’s late n i don’t have to watch the whole thing do yo lose everything after the reset?
No you don't lose anything. However your gun and ship will get a lot of damaged parts. Switch to a basic ship and gun before you choose and it makes it super simple to fix then you can go back to your normal stuff after. Reset is the correct choice. You don't lose anything
I am stuck in a loop on this mission. Almkst considering starting over unless if somebody has a work around it.
Born and raised Qwaqwa never been in this mountain I wish to go there 1 day but the stories are too scary,as for climbing that chain ladder it's a big no 😅 for me
its okey thanks e lot brother
ASRock Tiachi z690, Gskill Ripjaws DDR5-6000, i7-13700k.... No matter what I do, my ram will not run at anything other than 3000. Literally nothing works. This PC has been built, at the time of writing this, for 5 days.
I finished the Atlas path / Purge and reset the simulation....NEVER got the choice of a new type of galaxy.....just moved onto Atlas Eternal......more endless wasting of time.
I’m glad I found this jsut bought some new ddr5 at 8000 and I was getting 4000 in a1 b1. I’m excited to try this I’m missing half my ram’s capabilities
Wow. Been trying for a week to get my DDR5 working and then just came across this video. Worked first time. I did the same as a lot of people, I assumed the mobo wants it in A1/B1 but the manual says otherwise after re-reading it after this video. I bought some expensive 6400 Trident Z5 which wouldn't even post above 4600. Now it just booted straight into 6400 no problems. Thought I was going to have to return the RAM. ROG STRIX Z790-A GAMING WIFI, 14700kf
so it wasn't worth it
Like, like, like... ty!
Did my test today and failed because I did my lane change too early. The guy said that I’m supposed to change lane only after C
I've gone though a dozen videos looking for the fix, your video with the simplest solution is the one that worked
having same problem, withn Z790, 3 G.skills DDR5 sticks 16,32 and 16GB (slots used 12,4) not able to enable XMP. currently running at speed of 4000MHZ
Which driving school teaches bike
Where to be tested wt a a bike
bro thanks a lot for you advice
Which place in mossel bay South Africa
Thanks, am going for my test this coming week
When u stop do u put ur stand down or just ur leg?
I can't find the by per PMICs option, i have Asus B650 prime plus. Help me !
I think that’s for Intel CPUs only? Idk i have 7900x3d x670e and can’t find it either
@@dr.hannibal8338 if its the case its sad
In the z790 manual it states a2/b2 main slots so well you now in the slots they are meant for
Thanks
thank you so much worked on my 790 Eva !
Chock full of Great White “Tax Collectors”
Very helpful I want to start with lessons, soon
Great tutorial it fixed my problem
Great video! On the left turns 2:21 are you allowed to do clutch control/friction zone to take the 2 turn? Especially the 2nd one at 2:34
The second turn is directly after a stop, so you will have to stop first and then take the turn while pulling away.
It not start up after finished?
Awesome, video. Thanks for make it. I passed my test on my first attempt on my GS 700.
You are most welcome and congratulations!
@@Lego-Adventures i am hopping on because i am writing on saturday because the serverr was down on my day, could help guys with some Q&A of the learnes or share a pdf i can read. My guess is eveything is the same except the controls and movements, please assist as soon as you can i will come back tomorrow around 9ish
Thank you so much , i was using slot A1 and B1 and i couldn't use xmp profile, so when i switched to slot A2 and B2 the problem solved
You are most welcome! Thank you for the positive feedback!
0:37 you meant different systems, right? Not different Galaxies like, for example. from the Euclid Galaxy (starting gal.) to other 15 i hope...
Yes, thank you for the respectful correction.
@@Lego-Adventures you're welcome my friend, keep up the good work and have a nice new year! ❤️
Excellent video. I watched it over and over and I passed my test today - first time. Thank you!
I was using 2x32Gb Vengeance 6400 CL32 for a while perfectly using it at 6000Ghz stable. Now i finally bought other 2 blades of the same to have a total of 128Gb, and wasnt able to boot the Pc Anymore (Updated to latest Msi Bios updates before putting the blades), got it to boot to bios perfectly and showed full RAM, then after booting again, never POST anymore. I had to remove two blades physically and down the speed to 4000Ghz and have them to boot to windows. What a hell! I am gonna try watching your video now for some options.
Please let us know if it works for you or not. Also, try downgrading the BIOS to the version that worked previously.
Good Video, Thank you.
Hi, thanks for your support. In the boot menu I don't have VDD and VDDQ but VDD2 and VDDQ. Also, I can't find the setting PMIC Voltage but many settings for sync or split voltage settings. My motherboard is Gigabyte Z790 Gaming X AX and I use 4 sticks of Kingston Fury RGB 16gb 5600hz. Can you help me? Thanks!
Any solution? Have the same problem whit a Gigabyte UD AX, but whit 2 sticks. When trying whit XMP profile, it's stuck on boot. 4800mhz will only work, but the sticks is at 6000mhz.
@@erikjarl9361 With 2 5600hz sticks I had no problems with XMP 1 (5600) profile active - Now that I have 4, I have managed, for now, to be stable with the XMP 2 profile active at 5200hz. Unfortunately, as I said, I don't know exactly what to change during boot because the entries on voltage are numerous and different from those in this video.
i finished the atlas path and now what do i do cos there are no missions for me to do
Wow, thank you so much it worked!!!
Man you are great 👍 finally my ram is working on full speed. Thanks
got this to work for my 2 sticks of 16gb ram not enabling xmp on my asus z790-p mobo. switched ram stick to slots a2/b2, went into bios and changed to xmp 1 , saved and restarted and it fired right up. thank you for the video.
Thanks brah, dit het gehelp! Dankie man.
what would happen if i made a 2nd heart of the sun before I do the dream of the deep and The Purge !.
My mobo calls for a2 b2 configuration, does that mean i should try a1 b1? Im running g.skill flare5 6000 ddr 5 2x32 with a ryzen 9 7900x on a b650e-f. When i turn on EXPO and set it to 6000 it wont post but when i dial back to 5800 it will.
CORSAIR VENGEANCE DDR5 RAM running in XMP at 6600MHz thanks to you! I can't believe I have spent so much time troubleshooting this.
Im tired of struggling to start quests in this game. I think Im done..
This game is awful for instuctions