Why don’t they make these for a 2016 Rebel? By the way everyone DONT NOT use Rock Auto, they have scammed people with their return policy. They will send you the wrong part then except your return then turn around and tell you they won’t refund you. Happened to me and first hand knowledge of others.
@wildwoodtop13 күн бұрын
Hemiman! 🤟🤳 will these fit - 2014 Dodge Ram Express crew cab 🤔
@TYGERAUTO13 күн бұрын
Yes sir they will fit your vehicle. If you haven't done so, you may use the link in the description to visit the product page.
@jbigras15 күн бұрын
This video helped a lot
@AudianPaxson21 күн бұрын
Looks great! Any chance there is a version without the stars? Seems like every Jeep accessory these days has some version of stars and stripes.
@TYGERAUTO21 күн бұрын
Unfortunately we don't have any non-star step pad variations.
@davinchamberlain742724 күн бұрын
I have the t5 cover, how will that open with this bar on? Does it just fold up under the bar prevent me from lifting all the way up to the 3rd pannel? Are there any images out there of the T5 opened with the sports bar?
@eltonhernandez318228 күн бұрын
I would like to see how you put in back the weather strips , i ready order yesterday my roof rack
@TYGERAUTO28 күн бұрын
Here is a good video for your reference Elton. kzread.info/dash/bejne/gImKj9aTirSyo5M.html In the case of Tyger Roof Rack, the mounting holes areas would be trimmed off so you can adjust application of the adhesive if you wish to do so. Also, make sure you keep track of which pieces of strips go on which side.
@pas84av2Ай бұрын
I have your bumper for my 2020 JLU. DO I need to purchase brackets to install a Rough Country 12,000LB PRO Series Electric Winch. or are the holes machine in the bumper universal?
@TYGERAUTOАй бұрын
I checked the mounting pattern spec on the RC Winch, which says 254 x 114mm. That is the same mounting hole pattern on the Winch Plate of the Tyger Bumper so you shouldn't need any additional brackets.
@user-vo8lg6pj8kАй бұрын
Will this fit a 2021 ram 1500 classic?
@TYGERAUTOАй бұрын
Yes, these will fit a 2021 Ram 1500 Classic.
@brianbeavis5915Ай бұрын
At 1:40 you show the black bracket that the rear latch clamps to. Any idea where I can get 2? I have nothing under plastic that needs cut out and latch handle is hitting lights in bed before locking into place.
@TYGERAUTOАй бұрын
Hello Brian, that bracket actually came from the factory for earlier Gladiator models. We wish to further look into this issue for you so if it doesn't trouble you can you please send us photos for of the mounting area to [email protected]?
@brianbeavis5915Ай бұрын
@@TYGERAUTO look at your KZread video a 1 minute 40 seconds
@TYGERAUTOАй бұрын
@@brianbeavis5915 Yes we understand the issue you're referring to. Jeep changed the design of that part of the bed rail 2 years after the first gladiator. What you saw in 1:40 is the original factory design with the black bracket. Unfortunately Jeep removed that bracket later on and based on what you shared, the angle of the latch is altered as a result so you're not getting as good a fit. We would like to have a closer look at your scenario to see if we can help you improve your experience. We cannot provide that black bracket because that's a Jeep factory part from earlier model years of the JT.
@gustavogonzalezvelasquez3388Ай бұрын
Tengo una duda tengo que perforar los otros 8 huecos para por ser poner el rack de techo no explica el video bien?
@TYGERAUTOАй бұрын
La perforación es opcional para aumentar la capacidad. Lamentablemente no se muestra en este video ya que debemos devolver el vehículo al propietario en las mismas condiciones.
@salehfunkyАй бұрын
🌵🌵🌵🌵🌵🌵🌵🌵🌵🌵🌵🙌
@dominica2765Ай бұрын
They’re not carrying no 600 pounds with that rack
@HannanpiyadaPiyadaАй бұрын
Jj😮j😮😅 😮😮jjj 😮😊😮😊😊😮😅😊😅😊❤😅😮😊
@ratpackv8sonlyАй бұрын
Bought one for my 2020 chevy trail boss and the back of it wiill not stay latched. I have the latch points move in to the last line and it still has so much tension on it that the back is lifting up off of the tailgate about 1 inch. You can see the latch fingers are starting to break at the corners. I have the rails moved in to the correct width as well. The back will actually pop off with the slightest bump. Any others having this issue?
@TYGERAUTOАй бұрын
Hi, that's rather unusual. I suggest that you email us so we have an another look for you [email protected]
@zayragarcia4179Ай бұрын
The bar is straight and the original was slightly curved 🤷♀️
@shawn_1432 ай бұрын
I have a 2018 Ram 2500. The back doesn't seal to the tailgate and only enough weatherstrip for the front
@TYGERAUTO2 ай бұрын
I'd recommend you email us at [email protected] and ask our rep to send you some extra strips.
@snorlaxTACO2 ай бұрын
Tacoma 3rd Gen?
@TYGERAUTO2 ай бұрын
Here is the application for Tacoma 3rd Gen Double Cab. Let me know if you have any follow up questions.
Can I attach a winch and pull cars out of the sand with it?
@TYGERAUTO3 ай бұрын
The mounting plate for the Tyger Bumper Guard are only meant for attaching accessories such as light pods and light bars so they don't fit a winch.
@rodprice48713 ай бұрын
Do these bumper still utilize the sensors
@TYGERAUTO2 ай бұрын
For the 4th Gen Ram application, yes you would be able to re-attach the rear sensors to the bumper.
@darthflavor35103 ай бұрын
i would like to see a video of the installation that requires drilling. seems hard to find much information on that.
@joshualewis62053 ай бұрын
Do you have to have your truck leveled or lifted to install ?
@TYGERAUTO3 ай бұрын
Your vehicle should be on a level surface but you don't need to lift it to install this bumper.
@joshualewis62053 ай бұрын
Okay thanks mines is still factory wanted to install this first than I was going to level it
@Jhh5733 ай бұрын
my wife said mine looks like a pool noodle texture. I can't unsee it now.
@TYGERAUTO3 ай бұрын
Have you seen black pool noodles though? :)
@teslaman30253 ай бұрын
So you have a video showing installation utilizing the bed rails on the Gladiator?
@racecardon8294 ай бұрын
Do you have to drill the rockers to put the other brackets on or are they optional?
@TYGERAUTO4 ай бұрын
All of the current vehicle models require no drilling whatsoever. Drilling is only needed for a small number of older models so if you have an older model let me know and I can confirm for you.
@racecardon8294 ай бұрын
@@TYGERAUTO I have a 2016 ram 1500 and I don’t have any holes on the pinch welds nor the rocker area.
@TYGERAUTO4 ай бұрын
@@racecardon829 Any Ram models after 2012 should have holes at the pinch weld unless there is rusting or modifications done to the rocker panel. I've attached the product detail page for the 4th gen ram crew cab model. You can download the installation manual via the green icon to get a better idea. Let me know if you have any other questions. www.tygerauto.com/running-boards/tyger-rider/tg-ss2d35318/tyger-rider-35-fit-2009-2018-dodge-ram-1500-2010-2024-2500-3500-2019-2024-classic-crew-cab.html
@alecruiz13284 ай бұрын
For some reason, the middle of the bed cover is popping up, I want it to lay flush and flat, how can I fix this? Or is it normally like that
@frank_texas74004 ай бұрын
Parking door bangers deterrents
@barrycanete98494 ай бұрын
how much weight can this support??
@mrmclovin96354 ай бұрын
I already have the tyger sport rack installed. Can i use this?
@TYGERAUTO4 ай бұрын
Yes the T3 fits with the Rack (there's a channel at the base of the rack mounting bracket) and know that the foldability of the cover would be limited because of the rack.
@DanO1819194 ай бұрын
Will this work on the new 2024 Chevy Silverado. My bed measures 68 1/2” or 5’ - 8 1/2”.
@TYGERAUTO4 ай бұрын
Yes it does, here is the link for the model that would fit your specific vehicle. Please let me know if you have any other questions. www.tygerauto.com/tonneau-cover/tyger-t3-soft-trifold/tg-bc3c1053/tyger-t3-soft-tri-fold-fit-19-24-silveradosierra-1500-new-body-510-bed.html
@DanO1819194 ай бұрын
@@TYGERAUTO Thank you! I’ve been reading your reviews and they are outstanding to say the least. I’m definitely getting one. I appreciate your help!
@TYGERAUTO4 ай бұрын
@@DanO181919 Thank you for your kind words and we appreciate your support.
@DanO1819194 ай бұрын
@@TYGERAUTO my new cover came in yesterday and installed it in a few minutes. It works and looks great. Very well packaged too. I can tell your company takes pride in what you do…Thanks again!!
@TYGERAUTO4 ай бұрын
@@DanO181919 You're very welcome! Always happy to deliver and serve.
@brianayers51494 ай бұрын
These instructions suck. 2 different colors for side but nowhere does it say which is which. I love doing things twice thanks for such a nonspecific way to place parts with pieces and tell us to figure it out. AWESOME ENOYED IT!!!
@TYGERAUTO4 ай бұрын
We sincerely apologize for the inconvenience brianayers5149. Generally, the green bag would denote the driver side parts.
@Delfy-xk3ws4 ай бұрын
Tysm life saver
@starbound035 ай бұрын
Does this work for 5ft bed on a tacoma? Also, i dont have cargo rails, previous owner removed them (and they are expensive)
@TYGERAUTO5 ай бұрын
Yes this works for both 5.5 and 6.5 bed on a Tacoma (make sure you order the mid-size version shown in this video). As for the lack of bed rail. It shouldn't be an issue. You have 2 options. At 2:07, you see the 3 vertical slots in the bracket, just slide the clamp blocks underneath the bed rail lip to screw on; this is the universal default method for models without cargo tracks. If the clamp blocks don't work you can always drill into the top 2 holes (the horizontal slots) and bolt them on. You can see how installation without cargo track works in the full-size model video here - kzread.info/dash/bejne/aH2EutmCZbHHdbg.htmlsi=nL1rLq0rChvDLQs0.
@starbound035 ай бұрын
@@TYGERAUTO dang, that was fast. Thanks!
@TYGERAUTO5 ай бұрын
@@starbound03 Let us know if you have any other questions.
@tothemountainsigo5 ай бұрын
I noticed you (likely) don't have anything for 1st or 2nd gen Tacomas. I feel really confident there are enough 1st and 2nd gen owners out there that you'd have plenty of interest. I sincerely hope those products are coming down the pipe line... please. 🙏 signed: a disappointed 1st gen owner
@TYGERAUTO5 ай бұрын
Thank you for the feedback! We will have a look and see if there's a market for it and if it's even feasible (sometimes the factory design doesn't unless we just slap on a double-sided tape which isn't what this product line is about). Our next application is for the 4R so we definitely believe in Toyota owners' preference for our TLGs.
@Richard012345 ай бұрын
Are the main 8 bolts still 18MM? I have a 21 and I thought they were bigger.
@TYGERAUTO5 ай бұрын
The 8 "main bolts" are part of four 12mm x 40mm Double Bolt Plates. The washers that go on each bolt studs are 12mm x 37mm x 3mm. You can go over the instruction manual here to get a better idea and reply here if you have any follow up questions. www.tygerauto.com/mm5/graphics/instructions/TG-BP6J80068.PDF
@user-cz2ei1nh8y5 ай бұрын
I cant get the hitch lock off the bolt. The keys dont turn anything.
@daneehazama13925 ай бұрын
Tyger service customer support is very good.I recommend this product. I have it for my Nissan Titan truck
@TYGERAUTO5 ай бұрын
Thank you for the testimonial!
@alphasheepdog96835 ай бұрын
Lack of Integrated fogs is what kept me from this purchase.
@joevang43486 ай бұрын
Without drilling the front and just applying the foam seal, I feel like there is not enough pressure point to keep the front faring from vibrating or having crazy wind noise. I would love to see more reviews on non drilling setup and driving at xxx mph. I want to buy but nervous at the same time.
@punkrocker101154 ай бұрын
You will definitely want to drill it in. I've had it for about a month without the extra drilling and the rack slaps the roof whenever you go over hard bumps. Other than that, it's really well made imo.
@kennethhuff71586 ай бұрын
Looking for a shorter version so I can use my tool box , can you make them for this application?
@83joshcash6 ай бұрын
Could you please make a video for this same side step for a jeep gladiator
@TYGERAUTO6 ай бұрын
You can check out the following video below for our older generation Lander installed on a JT - the way those were mounted are similar enough for you to follow. If you require additional assistance shoot us an email at [email protected] kzread.info/dash/bejne/gJV2x5SDoKa4Yrw.html
@mymemoryarchive14 күн бұрын
u mention raised 2”… but whats the drop measure?
@goodridevibes6 ай бұрын
Installed on my 23 Colorado in minutes! Great product guys!
@TYGERAUTO6 ай бұрын
Appreciate your support!
@Sanjivkumar-yk1lz6 ай бұрын
Uuuuu
@MrAmoney4166 ай бұрын
23 sierra 1500 model? You website says it dosent have an option for me
@TYGERAUTO6 ай бұрын
Hello, unfortunately currently we don't have one for the current gen Sierra.
@MrAmoney4166 ай бұрын
@@TYGERAUTO in the works?
@TYGERAUTO6 ай бұрын
@@MrAmoney416it is but no timeline we can share. Won't be the near term.
@SonnySoung6 ай бұрын
Installed mine a few months ago but im having a hard time finding the t nuts that will fit the rails. What size do you guys use?
@TYGERAUTO6 ай бұрын
Hi Sonny, if you're looking for alternate hardware to slide into the rails. The size for the rail is M6. If you're looking to get more eyelet bolts, we are bringing in add-on eyelet bolt packs to be sold separately in the coming months.
@bliziglizi90346 ай бұрын
Would this fit the jk wrangler
@TYGERAUTO6 ай бұрын
The roof racks are all models specific and we currently don't have one that fits a JK.
@GoWith-sahil6 ай бұрын
really helpful video
@TYGERAUTO6 ай бұрын
Thank you!
@thesandykimchi6 ай бұрын
Those look badass! 😍 I will be ordering them for my Tacoma!
@TYGERAUTO6 ай бұрын
🙌🙌🙌
@srcastic87646 ай бұрын
I just bought a 2024 Sport. It has adaptive cruise control and collision avoidance. Will changing to this, or any aftermarket bumper like this, interfere with those functions?
@TYGERAUTO6 ай бұрын
As of today, for the Wrangler JLs, there are no sensors in and around the factory bumpers. The FCW system uses the camera under your rear view mirror for detection and presumably the same for the ACC (there's no mention in the user manual but it's not a new tech). So it's safe to swap the factory front bumper with an aftermarket version regarding your concerns. On the other hand, for the JL rear bumper, the parking sensors are located in the bumper; our Tyger Auto Rear Bumper for the JL have the cutouts and sensor housing included to allow you to relocate those sensors to our bumper.
@rellmedia6 ай бұрын
I have the same issue, the latches are super tight towards the tailgate side and they won’t close.
Пікірлер
Why don’t they make these for a 2016 Rebel? By the way everyone DONT NOT use Rock Auto, they have scammed people with their return policy. They will send you the wrong part then except your return then turn around and tell you they won’t refund you. Happened to me and first hand knowledge of others.
Hemiman! 🤟🤳 will these fit - 2014 Dodge Ram Express crew cab 🤔
Yes sir they will fit your vehicle. If you haven't done so, you may use the link in the description to visit the product page.
This video helped a lot
Looks great! Any chance there is a version without the stars? Seems like every Jeep accessory these days has some version of stars and stripes.
Unfortunately we don't have any non-star step pad variations.
I have the t5 cover, how will that open with this bar on? Does it just fold up under the bar prevent me from lifting all the way up to the 3rd pannel? Are there any images out there of the T5 opened with the sports bar?
I would like to see how you put in back the weather strips , i ready order yesterday my roof rack
Here is a good video for your reference Elton. kzread.info/dash/bejne/gImKj9aTirSyo5M.html In the case of Tyger Roof Rack, the mounting holes areas would be trimmed off so you can adjust application of the adhesive if you wish to do so. Also, make sure you keep track of which pieces of strips go on which side.
I have your bumper for my 2020 JLU. DO I need to purchase brackets to install a Rough Country 12,000LB PRO Series Electric Winch. or are the holes machine in the bumper universal?
I checked the mounting pattern spec on the RC Winch, which says 254 x 114mm. That is the same mounting hole pattern on the Winch Plate of the Tyger Bumper so you shouldn't need any additional brackets.
Will this fit a 2021 ram 1500 classic?
Yes, these will fit a 2021 Ram 1500 Classic.
At 1:40 you show the black bracket that the rear latch clamps to. Any idea where I can get 2? I have nothing under plastic that needs cut out and latch handle is hitting lights in bed before locking into place.
Hello Brian, that bracket actually came from the factory for earlier Gladiator models. We wish to further look into this issue for you so if it doesn't trouble you can you please send us photos for of the mounting area to [email protected]?
@@TYGERAUTO look at your KZread video a 1 minute 40 seconds
@@brianbeavis5915 Yes we understand the issue you're referring to. Jeep changed the design of that part of the bed rail 2 years after the first gladiator. What you saw in 1:40 is the original factory design with the black bracket. Unfortunately Jeep removed that bracket later on and based on what you shared, the angle of the latch is altered as a result so you're not getting as good a fit. We would like to have a closer look at your scenario to see if we can help you improve your experience. We cannot provide that black bracket because that's a Jeep factory part from earlier model years of the JT.
Tengo una duda tengo que perforar los otros 8 huecos para por ser poner el rack de techo no explica el video bien?
La perforación es opcional para aumentar la capacidad. Lamentablemente no se muestra en este video ya que debemos devolver el vehículo al propietario en las mismas condiciones.
🌵🌵🌵🌵🌵🌵🌵🌵🌵🌵🌵🙌
They’re not carrying no 600 pounds with that rack
Jj😮j😮😅 😮😮jjj 😮😊😮😊😊😮😅😊😅😊❤😅😮😊
Bought one for my 2020 chevy trail boss and the back of it wiill not stay latched. I have the latch points move in to the last line and it still has so much tension on it that the back is lifting up off of the tailgate about 1 inch. You can see the latch fingers are starting to break at the corners. I have the rails moved in to the correct width as well. The back will actually pop off with the slightest bump. Any others having this issue?
Hi, that's rather unusual. I suggest that you email us so we have an another look for you [email protected]
The bar is straight and the original was slightly curved 🤷♀️
I have a 2018 Ram 2500. The back doesn't seal to the tailgate and only enough weatherstrip for the front
I'd recommend you email us at [email protected] and ask our rep to send you some extra strips.
Tacoma 3rd Gen?
Here is the application for Tacoma 3rd Gen Double Cab. Let me know if you have any follow up questions.
www.tygerauto.com/outdoor-sports/roof-rack/tg-rr1t33028/roof-cargo-carrier-storage-rack-fits-05-23-toyota-tacoma-double-cab-color-inserts-tg-rr1t33028.html
Can I attach a winch and pull cars out of the sand with it?
The mounting plate for the Tyger Bumper Guard are only meant for attaching accessories such as light pods and light bars so they don't fit a winch.
Do these bumper still utilize the sensors
For the 4th Gen Ram application, yes you would be able to re-attach the rear sensors to the bumper.
i would like to see a video of the installation that requires drilling. seems hard to find much information on that.
Do you have to have your truck leveled or lifted to install ?
Your vehicle should be on a level surface but you don't need to lift it to install this bumper.
Okay thanks mines is still factory wanted to install this first than I was going to level it
my wife said mine looks like a pool noodle texture. I can't unsee it now.
Have you seen black pool noodles though? :)
So you have a video showing installation utilizing the bed rails on the Gladiator?
Do you have to drill the rockers to put the other brackets on or are they optional?
All of the current vehicle models require no drilling whatsoever. Drilling is only needed for a small number of older models so if you have an older model let me know and I can confirm for you.
@@TYGERAUTO I have a 2016 ram 1500 and I don’t have any holes on the pinch welds nor the rocker area.
@@racecardon829 Any Ram models after 2012 should have holes at the pinch weld unless there is rusting or modifications done to the rocker panel. I've attached the product detail page for the 4th gen ram crew cab model. You can download the installation manual via the green icon to get a better idea. Let me know if you have any other questions. www.tygerauto.com/running-boards/tyger-rider/tg-ss2d35318/tyger-rider-35-fit-2009-2018-dodge-ram-1500-2010-2024-2500-3500-2019-2024-classic-crew-cab.html
For some reason, the middle of the bed cover is popping up, I want it to lay flush and flat, how can I fix this? Or is it normally like that
Parking door bangers deterrents
how much weight can this support??
I already have the tyger sport rack installed. Can i use this?
Yes the T3 fits with the Rack (there's a channel at the base of the rack mounting bracket) and know that the foldability of the cover would be limited because of the rack.
Will this work on the new 2024 Chevy Silverado. My bed measures 68 1/2” or 5’ - 8 1/2”.
Yes it does, here is the link for the model that would fit your specific vehicle. Please let me know if you have any other questions. www.tygerauto.com/tonneau-cover/tyger-t3-soft-trifold/tg-bc3c1053/tyger-t3-soft-tri-fold-fit-19-24-silveradosierra-1500-new-body-510-bed.html
@@TYGERAUTO Thank you! I’ve been reading your reviews and they are outstanding to say the least. I’m definitely getting one. I appreciate your help!
@@DanO181919 Thank you for your kind words and we appreciate your support.
@@TYGERAUTO my new cover came in yesterday and installed it in a few minutes. It works and looks great. Very well packaged too. I can tell your company takes pride in what you do…Thanks again!!
@@DanO181919 You're very welcome! Always happy to deliver and serve.
These instructions suck. 2 different colors for side but nowhere does it say which is which. I love doing things twice thanks for such a nonspecific way to place parts with pieces and tell us to figure it out. AWESOME ENOYED IT!!!
We sincerely apologize for the inconvenience brianayers5149. Generally, the green bag would denote the driver side parts.
Tysm life saver
Does this work for 5ft bed on a tacoma? Also, i dont have cargo rails, previous owner removed them (and they are expensive)
Yes this works for both 5.5 and 6.5 bed on a Tacoma (make sure you order the mid-size version shown in this video). As for the lack of bed rail. It shouldn't be an issue. You have 2 options. At 2:07, you see the 3 vertical slots in the bracket, just slide the clamp blocks underneath the bed rail lip to screw on; this is the universal default method for models without cargo tracks. If the clamp blocks don't work you can always drill into the top 2 holes (the horizontal slots) and bolt them on. You can see how installation without cargo track works in the full-size model video here - kzread.info/dash/bejne/aH2EutmCZbHHdbg.htmlsi=nL1rLq0rChvDLQs0.
@@TYGERAUTO dang, that was fast. Thanks!
@@starbound03 Let us know if you have any other questions.
I noticed you (likely) don't have anything for 1st or 2nd gen Tacomas. I feel really confident there are enough 1st and 2nd gen owners out there that you'd have plenty of interest. I sincerely hope those products are coming down the pipe line... please. 🙏 signed: a disappointed 1st gen owner
Thank you for the feedback! We will have a look and see if there's a market for it and if it's even feasible (sometimes the factory design doesn't unless we just slap on a double-sided tape which isn't what this product line is about). Our next application is for the 4R so we definitely believe in Toyota owners' preference for our TLGs.
Are the main 8 bolts still 18MM? I have a 21 and I thought they were bigger.
The 8 "main bolts" are part of four 12mm x 40mm Double Bolt Plates. The washers that go on each bolt studs are 12mm x 37mm x 3mm. You can go over the instruction manual here to get a better idea and reply here if you have any follow up questions. www.tygerauto.com/mm5/graphics/instructions/TG-BP6J80068.PDF
I cant get the hitch lock off the bolt. The keys dont turn anything.
Tyger service customer support is very good.I recommend this product. I have it for my Nissan Titan truck
Thank you for the testimonial!
Lack of Integrated fogs is what kept me from this purchase.
Without drilling the front and just applying the foam seal, I feel like there is not enough pressure point to keep the front faring from vibrating or having crazy wind noise. I would love to see more reviews on non drilling setup and driving at xxx mph. I want to buy but nervous at the same time.
You will definitely want to drill it in. I've had it for about a month without the extra drilling and the rack slaps the roof whenever you go over hard bumps. Other than that, it's really well made imo.
Looking for a shorter version so I can use my tool box , can you make them for this application?
Could you please make a video for this same side step for a jeep gladiator
You can check out the following video below for our older generation Lander installed on a JT - the way those were mounted are similar enough for you to follow. If you require additional assistance shoot us an email at [email protected] kzread.info/dash/bejne/gJV2x5SDoKa4Yrw.html
u mention raised 2”… but whats the drop measure?
Installed on my 23 Colorado in minutes! Great product guys!
Appreciate your support!
Uuuuu
23 sierra 1500 model? You website says it dosent have an option for me
Hello, unfortunately currently we don't have one for the current gen Sierra.
@@TYGERAUTO in the works?
@@MrAmoney416it is but no timeline we can share. Won't be the near term.
Installed mine a few months ago but im having a hard time finding the t nuts that will fit the rails. What size do you guys use?
Hi Sonny, if you're looking for alternate hardware to slide into the rails. The size for the rail is M6. If you're looking to get more eyelet bolts, we are bringing in add-on eyelet bolt packs to be sold separately in the coming months.
Would this fit the jk wrangler
The roof racks are all models specific and we currently don't have one that fits a JK.
really helpful video
Thank you!
Those look badass! 😍 I will be ordering them for my Tacoma!
🙌🙌🙌
I just bought a 2024 Sport. It has adaptive cruise control and collision avoidance. Will changing to this, or any aftermarket bumper like this, interfere with those functions?
As of today, for the Wrangler JLs, there are no sensors in and around the factory bumpers. The FCW system uses the camera under your rear view mirror for detection and presumably the same for the ACC (there's no mention in the user manual but it's not a new tech). So it's safe to swap the factory front bumper with an aftermarket version regarding your concerns. On the other hand, for the JL rear bumper, the parking sensors are located in the bumper; our Tyger Auto Rear Bumper for the JL have the cutouts and sensor housing included to allow you to relocate those sensors to our bumper.
I have the same issue, the latches are super tight towards the tailgate side and they won’t close.