Пікірлер

• 
  @BeatCreationsGaming18 сағат бұрын

  Good share my friend. Great👍

• 
  @MJGamer882 күн бұрын

  Have An Awesome Week My Friend 💫

• 
  @pawelkonieczny23543 күн бұрын

  How I can download it

• 
  @nikolaosmnk3 күн бұрын

  This software works only with his cable pack

• 
  @AnyangCarCenter4 күн бұрын

  저도 배우고싶어요

• 
  @nikolaosmnk4 күн бұрын

  이모빌라이저를 끄는 데 필요한 현대 플래시를 읽고 내 이메일로 보내서 immo off 파일로 만드세요. 내 이메일은 [email protected]입니다.

• 
  @sondelsven11 күн бұрын

  Tipi top!...🇩🇪 Rock'n'Roll Baby 🤟🏻

• 
  @nephilimslayer13 күн бұрын

  posa aloga to evgales? a3izi na to kano?

• 
  @nikolaosmnk13 күн бұрын

  ναι αξιζει παίρνει 25-30 αλογα αναλογα την κατασταση αν εχει dpf ή οχι

• 
  @MJGamer8814 күн бұрын

  Awesome Job Keep Them Coming My Friend 👍💯

• 
  @MJGamer8816 күн бұрын

  Awesome Stuff Great Start To The Week 🔥

• 
  @deweew18 күн бұрын

  B7 or b8 ?

• 
  @ursschwarzwald507425 күн бұрын

  I have failure C01 please give the wire plan for the connector, i messure 12 v on the plug from the car but there is no wire from the connectore side is this correct , that the conector to the pc have no 12 v wire?

• 
  @nikolaosmnk25 күн бұрын

  yes that's right, lovato exr needs new updated cable interface

• 
  @jucatorul542726 күн бұрын

  Hello,I have 2 pairs of valtek injectors,with first one,the engine stops when I put it in neutral.The second one at high engine load doesn't inject enough Fuel.Can you give me some advice please,i want to know what you recommand. I have a 2.0 16v engine and in future i want to do almost 200 hp.This valtek injectors are good for this power or I need an upgrade? (Above 4000 rpm the ecu is set to change on gasoline,but i want that 800-4000 to have propper power from lpg :) 😊

• 
  @MJGamer8829 күн бұрын

  Epic Work My Friend 🔥

• 
  @SpeedserviceGRАй бұрын

  It is dangerous tool for this ecu.. it is not so stable for these ecu's. Better to choose another tool !!👍

• 
  @nikolaosmnkАй бұрын

  Thank you. What about Sid310 Mercedes Aclass, boot mode with fox flash?

• 
  @SpeedserviceGRАй бұрын

  @@nikolaosmnkhexpog II, is very good and stable tool !!

• 
  @SpeedserviceGRАй бұрын

  @@nikolaosmnk I prefer to use orig tools. For this ecu I read it always with Hexprog II .👍

• 
  @unaldogan7646Ай бұрын

  What should be the Hc 05 uart setting for lovato?  

• 
  @iliasafsaroglou6150Ай бұрын

  Οι κυβερνησεις των κρατων καταφεραν να υποχρεωσουν τις αυτοκινητοβιομηχανιες επιτελους να περιορισουν τα βλαβερα καυσαερια που βγαζουν τα οχηματα, πονηροι σαν και εσενα διαφημιζετε την καταργηση τους για να βαλετε μερικα ευρω στην τσεπη σας. Ευχομαι ολο αυτο το καλο που κανετε σε εμας και τα παιδια μας να το βρειτε μπροστα σας.

• 
  @MJGamer88Ай бұрын

  Keep It Up Massive Like My Friend 💫

• 
  @i_v_iАй бұрын

  Thank youu

• 
  @NiduDingsdaАй бұрын

  Well done 👍👍... But how you create the new file with immo off?

• 
  @MJGamer88Ай бұрын

  Have An Awesome Weekend My Friend Enjoyed This One 👍

• 
  @megamac3898Ай бұрын

  I have so similar codes and I couldn’t translate your video , could you tell me exactly what is the solution? Is that pcm update or what exactly? Codes what I have: DTC 000292 DTC 0002F5 DTC 1525F3 ESP check Engine hazard failure chip key is not recognized I deleted the faults but it come back after while Renault scenic 3, 2012, motor K9k 836 , 1.5 , 81 kw Car drives normally till the faults come back I would be really grateful if you could help me Greetings from Austria 🇦🇹

• 
  @nikolaosmnkАй бұрын

  read your file and send it to my email to make moded, email is [email protected]

• 
  @megamac3898Ай бұрын

  @@nikolaosmnk thank you for your answer but I don’t understand which file should I read ? Or how ? Thanks again

• 
  @nikolaosmnkАй бұрын

  read flash and send it

• 
  @Temu_sWАй бұрын

  Bro can you help me ? I put wrong map with kess v2 and the var doesnt turn on now, before i do back up but the back up (with kess v2) isnot working too, i have ktag too, help if you can, i can pay you.

• 
  @nikolaosmnkАй бұрын

  send me ecu id what model or photo of your ecu i can help you, my email is [email protected]

• 
  @alexsandroguedes1388Ай бұрын

  You do the immoof for me

• 
  @nikolaosmnkАй бұрын

  Yes i can send file and more informaition on my email [email protected]

• 
  @theodoroscheroulis247Ай бұрын

  Ποιο ακριβώς ήταν το πρόβλημα με την Egr? Αντιμετωπίζω στο ίδιο αυτοκίνητο limp mode χωρίς check engine light. Μια φορά μόνο άναψε το p2138 άλλαξα πετάλι αλλα εξακολουθεί το αμάξι να κόβει το γκάζι σε άκυρες στιγμές.

• 
  @nikolaosmnkАй бұрын

  Η βλαβη αφορα πενταλ γκαζιου ή πεταλουδα γκαζιου ή κομμενη καλωδιωση σε καποιο απο τα 2 εξαρτηματα, αλλιως αν τιποτα απο αυτα φταιει ο ιδιος ο εγκεφαλος και χρειαζεται αντικατασταση. Το αυτοκινητο ειναι 1.1diesel euro 6;

• 
  @theodoroscheroulis247Ай бұрын

  Σωστά ειναι 1.1 του 2015 euro 6. Μέχρι στιγμής κανεις δεν μπορει να βρει το πρόβλημα ουτε η Hyundai. Πάντως στο διαγνωστικό σε γράφημα οι αισθητήρες πεντάλ D/E δείχνουν να έχουν κάποια αστάθεια. Ειδικά ο E βυθίζεται στο 0% κάθε 5 δευτερόλεπτα σαν να μην παίρνει σωστή τάση ή να μην δίνει σωστή εντολή. Ποια θα θεωρούσες θα ήταν η σειρά ελέγχου για να βρεθεί το πρόβλημα;

• 
  @alexandremacedo114Ай бұрын

  tem software?

• 
  @lauwe54Ай бұрын

  In a bad place,thanks for sharing

• 
  @osermenkourtney3540Ай бұрын

  Is it on the driver's or passenger's side?

• 
  @nikolaosmnkАй бұрын

  passenger side

• 
  @MomoMomo-tz2veАй бұрын

  Good morning. I have the same problem as you, is it possible to send me the file? THANKS

• 
  @nikolaosmnkАй бұрын

  my email is [email protected] send message there with the type and numbers of ecu and reading of your ecu

• 
  @MJGamer882 ай бұрын

  Fantastic Job Can't Wait For The Next One My Friend 👍

• 
  @sezaiaydemir2 ай бұрын

  Güzel çalışma olmuş. Benim zavoli enjektörlerim kaçırma yapıyor ve geç çalışmaya sebep oluyor. Bu işlemi yapsam düzelirmi kaçırma sorunu?

• 
  @nicknolte60062 ай бұрын

  Gilt nur für Kondensatorrasenmäher! Nicht für Kohlenmotoren!

• 
  @nightster922 ай бұрын

  Hello! I have the same problem with Matiz, i installed the same emulator but the car won't start. Am i missing something? Does the jumpers 2 and 4 need to be soldered?

• 
  @MJGamer882 ай бұрын

  Let's Goooo! My Friend 💯

• 
  @ludmilvitkov34152 ай бұрын

  You have working solution for A/C

• 
  @nikolaosmnk2 ай бұрын

  yes

• 
  @ludmilvitkov34152 ай бұрын

  @@nikolaosmnk you have mesanger? E-mail?

• 
  @ludmilvitkov34152 ай бұрын

  @@nikolaosmnk They brought a Peugeot 1.6 16V to my workshop. Someone has turned the imo off. The car does not have air conditioning. Eprrom and flash (maps) are not from the same car. I have a Pin code from the BSI module. What is your suggestion. Thank you in advance

• 
  @nikolaosmnk2 ай бұрын

  @@ludmilvitkov3415 yes flash with immo off is from peugeot without ac, i have flash immo off with ac

• 
  @cosd37992 ай бұрын

  Whats the point? is it a good oil? it made by AVISTA. Can i use it?

• 
  @nikolaosmnk2 ай бұрын

  yes very good oil

• 
  @xxxxZagrebxxxx2 ай бұрын

  Hi, can you make a Link or Video what cables you are using?

• 
  @beegunsuhayl70092 ай бұрын

  Will this file work on clio 2

• 
  @nikolaosmnk2 ай бұрын

  yes

• 
  @antoniopace20012 ай бұрын

  Hi, you need to put sda pin to ground to write it? Or can I write it without opening?

• 
  @Kavil1942 ай бұрын

  Not worked for me, i added additional ground just in case but not worked. I still have PS failure time to time and had to restart car.

• 
  @user-gq9hu3hs2i2 ай бұрын

  Кто переведет на русский?

• 
  @MJGamer882 ай бұрын

  Happy Friday Have An Awesome Weekend My Friend 😎

• 
  @krks273 ай бұрын

  kalispera exo lovato egatastasi sto amaksi mou..exo balei elefteras eksatmisi olosomi kai agonistiko filtro.. exo mama egefalo pou den programatizete sto amaksi mou ,ginete na programatiso mono ton egefalo tou gaziou me to map pou blepo oti uparxi stin efarmogi oste na parei aloga? diladi sinergazete o egefalos tou gaziou me tou amaksiou h boro na anevaso migmata sto gazi

• 
  @nikolaosmnk3 ай бұрын

  ναι κανεις autocalibration στο υγραεριο ωστε να παρει μια ρυθμιση στο ρελαντι και μετα ρυθμιζεις μειγματα στο χαρτη αεριου οσο θελεις

• 
  @krks272 ай бұрын

  @@nikolaosmnk ευχαριστώ πολύ

• 
  @user-he1xq5jn7e3 ай бұрын

  Δεν παίζει το βίντεο σου. Είναι κακή η ανάλυση.

• 
  @nikolaosmnk3 ай бұрын

  ρυθμιζεται εκει που εχει σχεδιο ενα γραναζι settings-quality επιλεγουμε 720p

• 
  @emigrantglasgow3 ай бұрын

  Thank You so much for help

• 
  @chrisfes96113 ай бұрын

  Ποιες είναι οι καλές μάρκες σε ιμαντες;

• 
  @nikolaosmnk3 ай бұрын

  Contitech , Skf

• 
  @ZZZ-cl5ln3 ай бұрын

  Tell us how did you do that🙂

• 
  @zoraimarodriguez81693 ай бұрын

  Do you read with MPPS? 3:19

• 
  @leftman91503 ай бұрын

  Καλησπέρα. Πως μπορώ να απενεργοποιήσω την egr μέσω της obd θύρας σε Clio 4 1.5dci με EDC 17C42

• 
  @nikolaosmnk3 ай бұрын

  Καλημέρα δεν γινεται μεσω obd, πρεπει να βγαλεις εγκεφαλο κινητηρα και να μου το στειλεις να το κανω. Το τηλεφωνο μου ειναι 6945333199

• 
  @bleibcool32883 ай бұрын

  Ωραιο το βιντεο φιλε μου 🤜🤜 Για πες μου αν ξερεις να με βοηθησεις θελω να αλλαξω κοντερ σε ενα vw caddy 2008 μοντελο αλλα με σταματαει το ιμομπιλαιζερ πως μπορω να διαβασω τον κωδικο εχεις καμια ιδεα?🎉

• 
  @nikolaosmnk3 ай бұрын

  σε αυτα διαφορετικα γινεται πρεπει να ερθεις απο κοντα με το αυτοκινητο και το καντραν και αν γινει οπως το εργοστασιακο ή αλλη λυση να μου στειλεις τον εγκεφαλο κινητηρα να τον ξεκλειδωσω και κουμπωνεις κανονικα το καντραν και παιρνει μπρος

• 
  @bleibcool32883 ай бұрын

  @@nikolaosmnk αδερφέ μακάρι να μπορούσα θα στο είχα φέρει από προχθές, μένω ομως Γερμανία , αυτό με τον εγκέφαλο με immo off είναι η τελευταία μου λύση δν το καλύπτει σαν ασφάλεια εδώ έχει περίεργους νόμους δυστυχώς....

• 
  @bariscokmar3 ай бұрын

  Do the lock and unlock functions work separately?

• 
  @nikolaosmnk3 ай бұрын

  yes

• 
  @bariscokmar3 ай бұрын

  @@nikolaosmnkthanks!

• 
  @qeisabd82643 ай бұрын

  good job