I didn’t have a 49. A friend had a 37A he wasn’t using and sold it to me for cheap to tinker with.
@kdpjsp Жыл бұрын
For those keeping score it is JD317 - 1, snow - 0 . Nice setup!
@anonymoussources8803 Жыл бұрын
That's great, if you like Chiropractors.
@scottreynolds48272 жыл бұрын
Not sure my back would appreciate this.
@Georgiagreen3173 жыл бұрын
Well he did it! Why? Nobody knows! Is it an elusion or is it running backwards?
@deere_31733 жыл бұрын
Hard to see but the side of the blower housing has 2 idler sprockets that allow the auger to be driven on the backside of the side chain thus reversing direction of rotation.
@craigtate59303 жыл бұрын
Darn clever idea
@mikeznel60483 жыл бұрын
Thats an impressive little rig you have there!
@MrMarkpeggy3 жыл бұрын
Nice tractor setup. Thanks for sharing 👍
@toddjacobs56603 жыл бұрын
Cant say i like it, never seen it work
@user-jh1mq2ih2u3 жыл бұрын
Well no one asked you If you liked it and he also has a video of him using it
@toddjacobs56603 жыл бұрын
Good video 👍
@milwsdl393 жыл бұрын
That’s cool 😎👍
@dustintyson54893 жыл бұрын
Love you snow
@SteelDogFab4 жыл бұрын
This is the same setup I want to do on my Wheel Horse 520H. Looks like it works well
@mikeznel60483 жыл бұрын
I wish I had my C160 still. I had a Harley Davidson muffler for a stack on it. It was quiet and sounded great. 16 horse power Kohler K-series. Blew the rings plowing and sold it to my buddy cheap cheap.
@ilovemywifemost4 жыл бұрын
Ingenious. Nice work! I do have a JD 33 tiller. Too much for me though to duplicate on my 317 because I don't have those skills to mix and match the various parts and I suspect some welding too.
@grantreese25075 жыл бұрын
where do I find plans to make that integral hitch? I like it.
@thorbock19413 жыл бұрын
Same
@noworriesmate82875 жыл бұрын
Great set up!!!! Best of both worlds!!!
@tinmanstavern5 жыл бұрын
Awesome setup! Making a mini 4440 out of my 317
@joequillun77905 жыл бұрын
Does the advantage of having the frt plow, negate the fact you have-ta turn backwards to use the blower? Nice job on the driveway. Nice to have light and fluffy snow. How easily did the rear mounting of the blower go? My 214 has a tiller, and I also have the 37A. Will it work like yours, on the back?
@deere_31735 жыл бұрын
The blade works better for small amounts of snow and for wet snow so it’s my primary tool. I don’t find turning around to run the blower to be a strain so no issues there. The mount was a little tricky; it took a lot of welding and heavy-gauge steel to make it rigid enough to lift level but it’s still going strong. Unfortunately your 214 uses a 31 tiller which doesn’t have the same mounting frame and gearbox that made my setup work.
@joequillun77905 жыл бұрын
Well, good info, and great job on your mounting. Thanks for the reply.
@jeffwoehrle5 жыл бұрын
Sweet setup! Best of both worlds. Very nice.
@toddanderson67185 жыл бұрын
do you have pictures or video on how the snowblower and lift works, I would like to do that setup with mine
@jambocoo6 жыл бұрын
That 317 is an old machine, but proves they are just as good today as the day they were built, very nice job on that drive !.
@timdehoogh84416 жыл бұрын
smart saves time and gas or diesel
@annalobdell6 жыл бұрын
I'd like to see more of that set up
@4gauge107 жыл бұрын
These rear-mounted snowblowers are very rare on the older John Deere garden tractors.Deere offered rear mounting kits for the 300 series and 400 series tractors,but very few people bought them due to the fact you had to wrench your head around to watch while backing up. Also,if your running ag-tires,tractors don't get near the traction backing up as going forwards,so these rear mounted snow blower kits quietly disappeared from Deeres accessory lineup.
@FullMetalFab7 жыл бұрын
That is sweet. I've wanted to do something like this to a cub cadet with the rear pto in the trans if I ever get my hands on one. very cool.
@jonmyers80467 жыл бұрын
Any close ups of how this is put together? Very nice!
@jackolson64795 жыл бұрын
Yes please!
@joequillun77905 жыл бұрын
And another request.
@joshyoung7 жыл бұрын
now thats a badass setup!!!!
@pd99717 жыл бұрын
That's the shit right there and that's how you do it! Reminds me of my dad back when we lived in Western Massachusetts! The drive way had to be spotless just like how this guy has it!
@noworriesmate82875 жыл бұрын
pd9971 Yep and your still in the window watching.
@MichaelKitko7 жыл бұрын
Not to steal your idea, but this definitely inspired my build on my 140, so thank you.
@jasontheman107 жыл бұрын
Might put on my jd 318
@jasontheman107 жыл бұрын
Hey how do u build that
@just1lifexx117 жыл бұрын
nice
@Peter-pv8xx8 жыл бұрын
My cats were looking all around to see who was invading their territory.
@jdb488 жыл бұрын
very clever. I like it
@franksweets18598 жыл бұрын
Gute Arbeit!
@ompminc.56268 жыл бұрын
you made the rear setup?
@deere_31738 жыл бұрын
Yes, I combined parts from a model 33 tiller and the 37a blower by building my own brackets / lifting links and using a cross shaft with sprockets sized to attain 1000 rpm at the auger when the engine is at full throttle.
@ompminc.56268 жыл бұрын
Wow!!
@vydiniekarunaratne34207 жыл бұрын
Deere_317 Q
@MrJohndeere37209 жыл бұрын
if this lil guy can run a 3 pt blower soo can my x724... nice vid. :)
@MichaelKitko9 жыл бұрын
Nicely done...
@mi2tn9 жыл бұрын
Nice setup and does a good job.
@MichaelTJD609 жыл бұрын
Very cool setup. Looks like it works good and the 18 HP Vanguard has plenty of power to run it.
@deere_31739 жыл бұрын
Thanks! The blower can definitely move a lot of snow before the engine starts to grunt.
Пікірлер
WHY DIDN'T YOU USE A JD 49 SNOWBLOWER?
I didn’t have a 49. A friend had a 37A he wasn’t using and sold it to me for cheap to tinker with.
For those keeping score it is JD317 - 1, snow - 0 . Nice setup!
That's great, if you like Chiropractors.
Not sure my back would appreciate this.
Well he did it! Why? Nobody knows! Is it an elusion or is it running backwards?
Hard to see but the side of the blower housing has 2 idler sprockets that allow the auger to be driven on the backside of the side chain thus reversing direction of rotation.
Darn clever idea
Thats an impressive little rig you have there!
Nice tractor setup. Thanks for sharing 👍
Cant say i like it, never seen it work
Well no one asked you If you liked it and he also has a video of him using it
Good video 👍
That’s cool 😎👍
Love you snow
This is the same setup I want to do on my Wheel Horse 520H. Looks like it works well
I wish I had my C160 still. I had a Harley Davidson muffler for a stack on it. It was quiet and sounded great. 16 horse power Kohler K-series. Blew the rings plowing and sold it to my buddy cheap cheap.
Ingenious. Nice work! I do have a JD 33 tiller. Too much for me though to duplicate on my 317 because I don't have those skills to mix and match the various parts and I suspect some welding too.
where do I find plans to make that integral hitch? I like it.
Same
Great set up!!!! Best of both worlds!!!
Awesome setup! Making a mini 4440 out of my 317
Does the advantage of having the frt plow, negate the fact you have-ta turn backwards to use the blower? Nice job on the driveway. Nice to have light and fluffy snow. How easily did the rear mounting of the blower go? My 214 has a tiller, and I also have the 37A. Will it work like yours, on the back?
The blade works better for small amounts of snow and for wet snow so it’s my primary tool. I don’t find turning around to run the blower to be a strain so no issues there. The mount was a little tricky; it took a lot of welding and heavy-gauge steel to make it rigid enough to lift level but it’s still going strong. Unfortunately your 214 uses a 31 tiller which doesn’t have the same mounting frame and gearbox that made my setup work.
Well, good info, and great job on your mounting. Thanks for the reply.
Sweet setup! Best of both worlds. Very nice.
do you have pictures or video on how the snowblower and lift works, I would like to do that setup with mine
That 317 is an old machine, but proves they are just as good today as the day they were built, very nice job on that drive !.
smart saves time and gas or diesel
I'd like to see more of that set up
These rear-mounted snowblowers are very rare on the older John Deere garden tractors.Deere offered rear mounting kits for the 300 series and 400 series tractors,but very few people bought them due to the fact you had to wrench your head around to watch while backing up. Also,if your running ag-tires,tractors don't get near the traction backing up as going forwards,so these rear mounted snow blower kits quietly disappeared from Deeres accessory lineup.
That is sweet. I've wanted to do something like this to a cub cadet with the rear pto in the trans if I ever get my hands on one. very cool.
Any close ups of how this is put together? Very nice!
Yes please!
And another request.
now thats a badass setup!!!!
That's the shit right there and that's how you do it! Reminds me of my dad back when we lived in Western Massachusetts! The drive way had to be spotless just like how this guy has it!
pd9971 Yep and your still in the window watching.
Not to steal your idea, but this definitely inspired my build on my 140, so thank you.
Might put on my jd 318
Hey how do u build that
nice
My cats were looking all around to see who was invading their territory.
very clever. I like it
Gute Arbeit!
you made the rear setup?
Yes, I combined parts from a model 33 tiller and the 37a blower by building my own brackets / lifting links and using a cross shaft with sprockets sized to attain 1000 rpm at the auger when the engine is at full throttle.
Wow!!
Deere_317 Q
if this lil guy can run a 3 pt blower soo can my x724... nice vid. :)
Nicely done...
Nice setup and does a good job.
Very cool setup. Looks like it works good and the 18 HP Vanguard has plenty of power to run it.
Thanks! The blower can definitely move a lot of snow before the engine starts to grunt.