I'm trying to figure this all out because I also have fader and balance and volume control on each speaker. Do you set everything to zero before you do this? There's so many different factors. I don't know where to start
@dino5242 ай бұрын
Alpine tech told me the parking brake/settings tab is hit or miss. It’s a known issue with no real solution. It doesn’t matter if you pull brake on or on off/on off, the settings tab may or may not work. I just turned the parking brake function off and have it set to “in park”. Meaning settings tab will work if car is in park.
@ppkpravin172 ай бұрын
Hi is it possible to make the sweet spot possible for all passengers like a common point. Mine is ilx 509e with 3 way components in front and 2 way components in rear and a sub woofer in boot. Thanks in advance
@michaelbyrd89632 ай бұрын
Anyone know how to do this without happen to have a mathematics degree and trigonometry geometry and everything else My p h d in neuroscience was less work
@austinmatthews3472 ай бұрын
I have ilx w 690d and it has a strange issue. Once i select a dab preset if i turn radio off when i turn back on the dab isnt in the selected prest any ideas
@spiders2675 ай бұрын
If i understood correctly, if you have a sub, It doesnt get time correction?
@briankmizell5 ай бұрын
That's the way I understood it. But I've played around with time delay on my Alpine F-511 in my 2007 Tundra DC, and it definitely makes a difference on the impact of the subs.
@sourabhthakur907 ай бұрын
For all those who are searching for calculator or link, just divide the distance in inches by 13.5, you will get time alignment in milli seconds.
@kousaka93 Жыл бұрын
It seems the link is no longer available, Hope this can help. The formula: (Furthest Speaker Distance - Target Speaker Distance) / 13,5 = XX ms Example: Driver Front = 47 in (Target) Pass Front = 62 in (Furthest) (62-47) / 13.5 = 1.11ms
@thedarkriver1 Жыл бұрын
URL is gone.. :(
@husaberg650 Жыл бұрын
My Alpine passive crossovers have different modules you can insert to modify the time correction but I’ve noticed they are not suited to my newer vehicle I recently purchased. Can I bypass this feature on the passive crossovers and just use the head unit time correction?
@xXAlciel Жыл бұрын
The calculator link does not exist
@DropsOne206 Жыл бұрын
Calculator is missing from link now
@stargazer342 Жыл бұрын
Product looks good, the price is absolutely batshit crazy.
@EricBrettJones Жыл бұрын
Where can i get the time calculator please?
@gianpaolowww Жыл бұрын
How do i measure the front speakers if i have a 2-way configuration at the front?
@michaeldubin8965 Жыл бұрын
Any updates on the calculator?
@mrhernandez739 Жыл бұрын
Thanks for the info guys
@beginning-reloading Жыл бұрын
Bummed, the calculator link no longer works.
@colinvargo3418 Жыл бұрын
We’ll get it fixed.
@csj9619 Жыл бұрын
On a recommendation, I bought a Kenwood KAC-304 head unit because it has time-delay dsp. After living with it for a bit, I regret replacing my old Alpine CDA-9884 with the Kenwood. The time-delay didn't blow me away to begin with, but what infuriates me is the distance values will randomly change without having changed them. I then select "Reset DSP", only to find not all are at 0. Total TURD! Last time I buy anything on a recommendation. You hear that, HifiVega?
@bigchungus-oj8zz Жыл бұрын
Thank you for this video, very well presented. Yes, I want all the features that are available on my head unit in this format, please
@reginaldhall5471 Жыл бұрын
Time correction app has been deleted.
@colinvargo3418 Жыл бұрын
Working to fix it. Sorry about that.
@doyouluvit Жыл бұрын
link deleted......
@colinvargo3418 Жыл бұрын
Sorry. We’re get it fixed.
@clkozgr89 Жыл бұрын
@@colinvargo3418 Hi Colin link deleted. Please fix it
@dpp83 Жыл бұрын
Thx, for the video! I have two question. What should the time corrections be when sitting in a car with a passenger? Should I just use the center between me and the passenger as the sweet spot? And, the file has been deleted behind the link. Can you give us a new link to the Time Correction calculator?
@brendangood1052 Жыл бұрын
You can only do time correction for 1 person or seat. Trying to split it dosn't work
@dpp83 Жыл бұрын
@@brendangood1052 Thx for your reply, but in the Alpine manual they give two examples. Example 1. Listening Position: Front Left Seat and Example 2. Listening Position: All Seats. But the formula they are using looks the same. With Example 2 thy also tell you to measure from the drivers position. Have a look at page 35 in the manual: www.alpine-electronics.nl/fileadmin/user_upload/manuals//2021/iLX-705D_iLX-F905D_iLX-F115D_i905/OM_iLX-705D_iLX-F905D_iLX-F115D_i905_EN_ALL.pdf
@colinvargo3418 Жыл бұрын
Hey Diego, you can use a center point. Working to restore the link to the spreadsheet calculator. Thank you for watching!
@califmike2003 Жыл бұрын
your URL doesnt work anymore ????????? what happened to the calculator ?
@colinvargo3418 Жыл бұрын
Working to fix it. Sorry about that.
@atd10262 жыл бұрын
Can you share the link of the sheet? Looks like it's deleted from the given link
@wescool2guth6622 жыл бұрын
Is there a good time alignment for a full car of people or would “flat” just be the best option
@brendangood1052 Жыл бұрын
You can only time align for 1 seat.
@colinvargo3418 Жыл бұрын
Change all the values to a point in the center of the car. You can play with location being parallel to you, or a little further forward around the dashboard.
@ricardogarza54772 жыл бұрын
I have the CDE-HD149BT but it comes in inches or in cm. what is the procedure for rhis one? Do i only put the measurements exactly how i got them? And put them like FR 70in FL 75in RL 48in RR 56in? as an exaple...
@masonhackler28832 жыл бұрын
Exactly, I have the same hesdunit and have struggled since I got it to figure it out and get it to sound right
@colinvargo3418 Жыл бұрын
Hey guys, if you want to do the math yourself, you can simply use the furthest speaker (typically subwoofer) and subtract the distance of the speaker you want to time align, from the distance of the sub. IE: if the sub is 60” away, and your drivers speaker is 20” away, you want to add 40” of delay to the drivers speaker. Continue for every speaker in the car. Hope this helps.
@jethrol3629 Жыл бұрын
@@colinvargo3418 so if my driving position is on the right and the distance FR 100 cm and FL 160 cm how to input on my alpine cde 164BT? Just put the number? And how bout with the rear speaker?
@briankmizell5 ай бұрын
If your able to update your software it should add the cm option. My Alpine F-511 will update over a wifi connection, I just pull upto my home and connect to the wifi, and go to settings and update the software.
@elitelegendarygamer93402 жыл бұрын
Literally solved my problem a year later, thx
@mattimessi87403 жыл бұрын
Where i buy this product
@marcosnobre83733 жыл бұрын
is it me or there is more glare after the protector is installed?
@bobg21133 жыл бұрын
Had some awesome back up the unit works very well I’ve dealt with several of the processors out there right now and this one is up there. Thanks guys for coming down and giving the additional input on set up I think this is a homerun.
@jtmobile463 жыл бұрын
Well done guys! Setup made simple
@jtmobile463 жыл бұрын
Helpful and worth the watch!!
@davidherrera5314 жыл бұрын
I want to hear Colin's rocking voice on the hood of my car!
@colinvargo34184 жыл бұрын
David Herrera I don’t think you really do... lol
@colinvargo34184 жыл бұрын
Sorry for my Potato laptop camera. Working from home meant we used what we had. Thank you for watching!
@markjackson52474 жыл бұрын
great video, i have a question, why not select the (single) subwoofer and mix left and right channels to it? and why only mix to 50 rather than 100 if you are mixing 2 channels to one, thank you, by the way i also have this product, a PDX v9 and the older PDX4.150 all on the same install.
@Thrillhouse25004 жыл бұрын
Good question, you can totally select single sub but that would only give one output. By selecting Sub-L and Sub-R we are getting two outputs. We just showed a way to get a mono signal, if needed, in this example that's why we did 50% left and 50% right. When added together each output is getting 100% signal and you do not want to exceed that because the output would clip.
@markjackson52474 жыл бұрын
Daniel Greenwood I have recently put an oscilloscope on the outputs of the DSP and tried the setting at 50/50 and 100/100 and no clipping, unless I’m doing something wrong.thank you
Пікірлер
I'm trying to figure this all out because I also have fader and balance and volume control on each speaker. Do you set everything to zero before you do this? There's so many different factors. I don't know where to start
Alpine tech told me the parking brake/settings tab is hit or miss. It’s a known issue with no real solution. It doesn’t matter if you pull brake on or on off/on off, the settings tab may or may not work. I just turned the parking brake function off and have it set to “in park”. Meaning settings tab will work if car is in park.
Hi is it possible to make the sweet spot possible for all passengers like a common point. Mine is ilx 509e with 3 way components in front and 2 way components in rear and a sub woofer in boot. Thanks in advance
Anyone know how to do this without happen to have a mathematics degree and trigonometry geometry and everything else My p h d in neuroscience was less work
I have ilx w 690d and it has a strange issue. Once i select a dab preset if i turn radio off when i turn back on the dab isnt in the selected prest any ideas
If i understood correctly, if you have a sub, It doesnt get time correction?
That's the way I understood it. But I've played around with time delay on my Alpine F-511 in my 2007 Tundra DC, and it definitely makes a difference on the impact of the subs.
For all those who are searching for calculator or link, just divide the distance in inches by 13.5, you will get time alignment in milli seconds.
It seems the link is no longer available, Hope this can help. The formula: (Furthest Speaker Distance - Target Speaker Distance) / 13,5 = XX ms Example: Driver Front = 47 in (Target) Pass Front = 62 in (Furthest) (62-47) / 13.5 = 1.11ms
URL is gone.. :(
My Alpine passive crossovers have different modules you can insert to modify the time correction but I’ve noticed they are not suited to my newer vehicle I recently purchased. Can I bypass this feature on the passive crossovers and just use the head unit time correction?
The calculator link does not exist
Calculator is missing from link now
Product looks good, the price is absolutely batshit crazy.
Where can i get the time calculator please?
How do i measure the front speakers if i have a 2-way configuration at the front?
Any updates on the calculator?
Thanks for the info guys
Bummed, the calculator link no longer works.
We’ll get it fixed.
On a recommendation, I bought a Kenwood KAC-304 head unit because it has time-delay dsp. After living with it for a bit, I regret replacing my old Alpine CDA-9884 with the Kenwood. The time-delay didn't blow me away to begin with, but what infuriates me is the distance values will randomly change without having changed them. I then select "Reset DSP", only to find not all are at 0. Total TURD! Last time I buy anything on a recommendation. You hear that, HifiVega?
Thank you for this video, very well presented. Yes, I want all the features that are available on my head unit in this format, please
Time correction app has been deleted.
Working to fix it. Sorry about that.
link deleted......
Sorry. We’re get it fixed.
@@colinvargo3418 Hi Colin link deleted. Please fix it
Thx, for the video! I have two question. What should the time corrections be when sitting in a car with a passenger? Should I just use the center between me and the passenger as the sweet spot? And, the file has been deleted behind the link. Can you give us a new link to the Time Correction calculator?
You can only do time correction for 1 person or seat. Trying to split it dosn't work
@@brendangood1052 Thx for your reply, but in the Alpine manual they give two examples. Example 1. Listening Position: Front Left Seat and Example 2. Listening Position: All Seats. But the formula they are using looks the same. With Example 2 thy also tell you to measure from the drivers position. Have a look at page 35 in the manual: www.alpine-electronics.nl/fileadmin/user_upload/manuals//2021/iLX-705D_iLX-F905D_iLX-F115D_i905/OM_iLX-705D_iLX-F905D_iLX-F115D_i905_EN_ALL.pdf
Hey Diego, you can use a center point. Working to restore the link to the spreadsheet calculator. Thank you for watching!
your URL doesnt work anymore ????????? what happened to the calculator ?
Working to fix it. Sorry about that.
Can you share the link of the sheet? Looks like it's deleted from the given link
Is there a good time alignment for a full car of people or would “flat” just be the best option
You can only time align for 1 seat.
Change all the values to a point in the center of the car. You can play with location being parallel to you, or a little further forward around the dashboard.
I have the CDE-HD149BT but it comes in inches or in cm. what is the procedure for rhis one? Do i only put the measurements exactly how i got them? And put them like FR 70in FL 75in RL 48in RR 56in? as an exaple...
Exactly, I have the same hesdunit and have struggled since I got it to figure it out and get it to sound right
Hey guys, if you want to do the math yourself, you can simply use the furthest speaker (typically subwoofer) and subtract the distance of the speaker you want to time align, from the distance of the sub. IE: if the sub is 60” away, and your drivers speaker is 20” away, you want to add 40” of delay to the drivers speaker. Continue for every speaker in the car. Hope this helps.
@@colinvargo3418 so if my driving position is on the right and the distance FR 100 cm and FL 160 cm how to input on my alpine cde 164BT? Just put the number? And how bout with the rear speaker?
If your able to update your software it should add the cm option. My Alpine F-511 will update over a wifi connection, I just pull upto my home and connect to the wifi, and go to settings and update the software.
Literally solved my problem a year later, thx
Where i buy this product
is it me or there is more glare after the protector is installed?
Had some awesome back up the unit works very well I’ve dealt with several of the processors out there right now and this one is up there. Thanks guys for coming down and giving the additional input on set up I think this is a homerun.
Well done guys! Setup made simple
Helpful and worth the watch!!
I want to hear Colin's rocking voice on the hood of my car!
David Herrera I don’t think you really do... lol
Sorry for my Potato laptop camera. Working from home meant we used what we had. Thank you for watching!
great video, i have a question, why not select the (single) subwoofer and mix left and right channels to it? and why only mix to 50 rather than 100 if you are mixing 2 channels to one, thank you, by the way i also have this product, a PDX v9 and the older PDX4.150 all on the same install.
Good question, you can totally select single sub but that would only give one output. By selecting Sub-L and Sub-R we are getting two outputs. We just showed a way to get a mono signal, if needed, in this example that's why we did 50% left and 50% right. When added together each output is getting 100% signal and you do not want to exceed that because the output would clip.
Daniel Greenwood I have recently put an oscilloscope on the outputs of the DSP and tried the setting at 50/50 and 100/100 and no clipping, unless I’m doing something wrong.thank you