Just curious where did you get them from btw the enclosure looks amazing plan to replicate that when I get my monitor
@Varanibae56 минут бұрын
@@HKH_Oficial I got them from a breeder in Adelaide. I’ve been breeding them successfully for the last few seasons and have been selling them regularly
@user-ey6bo9pp1v25 күн бұрын
Are you still able to make this and ship out?
@yumingjiang386129 күн бұрын
Hi I love your video, I recently set up a woodroach colony, but after two weeks, I notice some dead woodies in the bottom of the container, is that normal or there's something wrong? mine is 120L container, have heat mat, dry and carrot, I bought nearly 1000 mixed size of woodies as starter as I wanna feed my reptile earlier.
@Varanibae28 күн бұрын
@@yumingjiang3861 The set up and feeding sounds good. Having dead ones down the bottom of the container is normal. I’d try not to feed the reptiles from the breeding colony for as long as possible
@AlanSemanАй бұрын
Could i ask how big are your adults and heavy , thanks
@Varanibae29 күн бұрын
@@AlanSeman they’re about 50cm in length and weighing 200-250g
@tekkythaiАй бұрын
best video about keeping and breeding woodies
@VaranibaeАй бұрын
Thank you!
@williamray-go5gcАй бұрын
when its night time and its really cold do you just leave your lace monitors be and let them find where the heat or do you put them in the nhide or leave the basking lights on?
@VaranibaeАй бұрын
I try to replicate what would happen in nature as much as possible. I don’t use basking lights at night as that will mess with photoperiod and it’s not a natural type of night time heat source anyway. Putting them in the hide is not a bad idea especially if the temperature drops rapidly, I’m aware that this is not natural but neither is the hide box itself
@williamray-go5gcАй бұрын
@@Varanibae ok thankyou
@maritimezombie76842 ай бұрын
This is amazing content, thank you for documenting these diy videos. Totally trying this
@Varanibae2 ай бұрын
Thank you!
@jonathonhoward31832 ай бұрын
Great explanation of why you use flash and your 3D printing skills are wicked!
@Varanibae2 ай бұрын
Thank you!
@HKH_Oficial2 ай бұрын
This is super cool. You should do a species spotlight on the scalaris, there really isn’t too much on them. How deep is the nest box? I like how your enclosures are both functional and good looking at the same time
@Varanibae2 ай бұрын
Thank you! I think it’s about 25cm deep. When I have time I’m hoping to do more videos
@TheOGDark3 ай бұрын
Pine is Toxic to reptiles homie
@Varanibae3 ай бұрын
My understanding is if pine has been dried and treated it gives off minimal toxins, on top of that sealing it with paint/ polyurethane would make it safe. Also more of an issue in a small poorly ventilated enclosure
@HKH_Oficial3 ай бұрын
Plan to get ideally an orientalis as my first monitor, this vid was super helpful since there isn’t too much info online about them, what strength and distance is the uvb? Beautiful lizards
@Varanibae3 ай бұрын
Glad you found the video helpful. Pretty much all australian monitors will benefit from a strong desert type UVB (10.0 or 12-14%). Mine are about 30-40cm from the globe
@HKH_Oficial3 ай бұрын
@@Varanibae that’s what I thought, thx for the help
@austinpartin34755 ай бұрын
Could you let me know all the materials you used for this? Wanting to build close to the same thing like pond, how much wood, screws, paint etc.. thanks!
@Varanibae5 ай бұрын
Hi Austin, 90x45 h3 pine. 12mm structural grade plywood, pocket hole jig and screws, fencing paint, right bond wood glue. Let me know if you have anything specifically you want to know
@OrchardKoi6 ай бұрын
What a neat idea. Just subbed
@ashleydobbs98776 ай бұрын
Thank you for the cool ideas. :)
@dustintinsley38996 ай бұрын
fantastic job.
@Varanibae6 ай бұрын
Thank you!
@ElysetheEevee6 ай бұрын
Haha, the dog dropped his ball in the roach bin. My son and I laughed. 😂
@Varanibae6 ай бұрын
😂 He likes to place his ball in what ever I’m working on to get my attention
@snakelizard23436 ай бұрын
What size tubs are you using?
@Varanibae6 ай бұрын
45L IKEA samla tubs
@snakelizard23436 ай бұрын
@@Varanibae Thank you! I can definitely see myself doing something like this for my more mid sized lizards like my bearded dragon, skinks, uromastyx and amieva!
@juzzymac67726 ай бұрын
Always been the most beautiful animal in Australia for me
@ddktexas75817 ай бұрын
Very nice rack system. What size tubs are you using?
@Varanibae7 ай бұрын
Thank you! These are 45L ikea samla tubs
@terryturnerau7 ай бұрын
Great videos. May I ask what software you are using for you 3D designs and printing?
@gabemcneal107 ай бұрын
This is awesome! How large will this specific monitor get? I’m currently looking into how to build an enclosure for a black throat monitor! What is the size and dimensions of this one here?
@Varanibae7 ай бұрын
It was a mature 4ft female. The enclosure was 2 x1.2 x1.8m
@TheN00Pe7 ай бұрын
What temp do you keep yours at? Tank is looking good, are no plants similar to their natural environment?
@Varanibae7 ай бұрын
I keep them at about 27c. No plants is a personal choice. I used to keep a lot of planted tanks and wanted a change. A lot of American cichlids would also rip out plants and being sand sifters I can’t really plant anything into the sand
@TheN00Pe7 ай бұрын
@@Varanibae damn, that's quite a high temp 😊
@tsivilay7 ай бұрын
What enclosure is this?
@Varanibae7 ай бұрын
4x4x2 FormPly glass front enclosure I built myself
@Drumboa8 ай бұрын
Amazing work!
@Varanibae8 ай бұрын
Thanks!
@worldpeacefrog8 ай бұрын
PEACE🍁 🌏✌🏿🐸
@Native_ichthyology8 ай бұрын
What's filtration system
@Varanibae8 ай бұрын
Eheim professional 3
@lonevoice79358 ай бұрын
one thing missing..... ROOM monitors needs alot of room to roam. imho, this is not cool
@Varanibae8 ай бұрын
I’ve tried raising hatchling monitors in larger enclosures but there’s always one or two that never do well because they hide far from the hot spot and never come out to eat. More room can be given when they are older and more established.
@zellcrs8 ай бұрын
jump scare at the end
@ThePiercedSoul8 ай бұрын
Just started looking at breeding woodies and this video is excellent 👍
@Varanibae8 ай бұрын
Thanks! Good luck with the breeding
@OgPythonsGang8 ай бұрын
That really nice man 🔥🔥🔥🔥
@Varanibae8 ай бұрын
Thanks!
@ALAMLUSVI9 ай бұрын
How do you clean dirt stuck to the cage?
@cristellrivera96289 ай бұрын
3:30 The dog at the back throwing his ball into one of the containers lol
@Varanibae9 ай бұрын
He deliberately does that. He’d also drop it into my buckets when I’m doing water change for my aquarium.
@markanddayatonellato69699 ай бұрын
Fantastic! - I have searched everywhere for something like this. Are you able to either share the STL or prinmt one for a price?
@Varanibae9 ай бұрын
Stl not for sale sorry, if you’re in Australia I can send you one
@markanddayatonellato69699 ай бұрын
That would be fantastic! How can we arrange that? Thanks!
@Varanibae9 ай бұрын
@@markanddayatonellato6969 either reach out on Instagram or leave me your email here
@markanddayatonellato69697 ай бұрын
Hi mate, what's your insta name?
@user-pr4rx7xq5i9 ай бұрын
Im trynna figure out a size I can make for my red tail boa , she loves to climb to and about 41/2 years
@user-pr4rx7xq5i9 ай бұрын
You make these enclosures?
@Varanibae9 ай бұрын
Yes I made them myself, will eventually do a video of the build
@rebel44669 ай бұрын
I don't need the video, but it's extremely well done and filled with good information. Wish all guides on KZread were like this.
@Varanibae9 ай бұрын
Thank you!
@SuperJosteen9 ай бұрын
I knew alot of people were able to tame their monitor lizards, but I would take a tegu over them all day of the week, my tegu never even strike at me to this day, the worst he does is just tail whipping when I'm not carrying him properly.
@Varanibae9 ай бұрын
Thanks you!
@nicktrotin9 ай бұрын
Your videos are so well done man keep it up this channel will blow up
@joddecolongon76949 ай бұрын
This is so awesome man
@Varanibae9 ай бұрын
Thank you!
@TheReptileDen9 ай бұрын
Beautiful reptile room🐍🦎
@dkn_chkn9 ай бұрын
hello i am working on launching a tank and was wondering if your willing to sell me your design or for the prototypes atleast let me use your design if i give credit
@Varanibae9 ай бұрын
Hi, unfortunately this design is still in development and I’m not looking at selling it at this stage
@johnhabkouk84519 ай бұрын
What do you use for nesting substrate and what’s the ratio?
@Varanibae9 ай бұрын
50/50 fine coco peat and play sand
@BlackAurumArt9 ай бұрын
Looks great!! Do you have a list of supplies that you used?
@Varanibae9 ай бұрын
Thanks! 1 inch aluminium tubes and nylon connectors, 3mm acrylic sheets, 3mm aluminium composite panel. Let me know if there’s a particular part you saw in the vid that you can’t find
@BlackAurumArt9 ай бұрын
@@Varanibaethanks the reply! I was curious about how you did the lighting
@Varanibae9 ай бұрын
@@BlackAurumArt the only lighting in there is the led strips, all the electrical supplies for that was from ebay. The cool white 12v led strips were placed into aluminium led channels that were mounted on a 45degree angle using 3d printed brackets. There are holes in the aluminium frame so that the wiring can be fed into the hollow aluminium tubs and be hidden. A female dc Jack was used so that the power supply for the led strip can be unplugged from the rack system if required
@BlackAurumArt9 ай бұрын
@@Varanibaethank you so much for the detailed response! 🫡
@rfo2310 ай бұрын
How many Sveni in that tank. And how many are males to females. I’m looking at getting a group for my 150 gallon
@Varanibae10 ай бұрын
Group of 6 close to fully grown sveni in that tank. I believe 4males 2 females, had them since they were small so didn’t run into any issues with not getting ratios right
@fryziesreptiles57510 ай бұрын
Fantastic vidoe, you should sell these in aus 👏 great innovation
@pumpkinchow10 ай бұрын
You need to start your own company making this kind of stuff. Great work again as usual 🙌 keep up the great work and wish you all the best and hope you have a great weekend bud 🙋♂️✌️
@Varanibae10 ай бұрын
Thank you mate! Difficult to scale up to a business the way I’m currently doing things. It just takes too much time for each project, it’s for my own enjoyment and satisfaction mainly
@pumpkinchow10 ай бұрын
@@Varanibae well keep it up because your inspiring bud and we need that in the hobby so hopefully more people will push the envelope on how they keep and care for their pets. I always enjoy watching your videos and getting new ideas maybe one day I can get some blueprints from you if I ever get. 3d printer I’d definitely pay for the prints you deserve it man. Hope you have a great weekend and wish you all the best 🙋♂️✌️
@PinheadTattooandPiercing10 ай бұрын
Almost $3.50-$6 per foot very expensive lol
@Varanibae10 ай бұрын
Do you know what I can use instead? I’m always looking for ways to cut cost in this hobby
@Pritchy99210 ай бұрын
what 3D printer do you use? Great videos aswell loving them
@Varanibae10 ай бұрын
I used to have the ender 3 which gets the job done but the speed and quality is much better ever since upgrading to the bambu p1p.
@marcuscarsonsr10 ай бұрын
copying this!!
@Varanibae10 ай бұрын
I’m in the middle of designing version 2 of these nest boxes. The only annoying thing about this design is all the wiring are fed through from the outside of the enclosure through a hole, I can’t take the nest box itself out of the enclosure without dismantling it. Version 2 will have in built thermostat and cables that can disconnect
Пікірлер
Just curious where did you get them from btw the enclosure looks amazing plan to replicate that when I get my monitor
@@HKH_Oficial I got them from a breeder in Adelaide. I’ve been breeding them successfully for the last few seasons and have been selling them regularly
Are you still able to make this and ship out?
Hi I love your video, I recently set up a woodroach colony, but after two weeks, I notice some dead woodies in the bottom of the container, is that normal or there's something wrong? mine is 120L container, have heat mat, dry and carrot, I bought nearly 1000 mixed size of woodies as starter as I wanna feed my reptile earlier.
@@yumingjiang3861 The set up and feeding sounds good. Having dead ones down the bottom of the container is normal. I’d try not to feed the reptiles from the breeding colony for as long as possible
Could i ask how big are your adults and heavy , thanks
@@AlanSeman they’re about 50cm in length and weighing 200-250g
best video about keeping and breeding woodies
Thank you!
when its night time and its really cold do you just leave your lace monitors be and let them find where the heat or do you put them in the nhide or leave the basking lights on?
I try to replicate what would happen in nature as much as possible. I don’t use basking lights at night as that will mess with photoperiod and it’s not a natural type of night time heat source anyway. Putting them in the hide is not a bad idea especially if the temperature drops rapidly, I’m aware that this is not natural but neither is the hide box itself
@@Varanibae ok thankyou
This is amazing content, thank you for documenting these diy videos. Totally trying this
Thank you!
Great explanation of why you use flash and your 3D printing skills are wicked!
Thank you!
This is super cool. You should do a species spotlight on the scalaris, there really isn’t too much on them. How deep is the nest box? I like how your enclosures are both functional and good looking at the same time
Thank you! I think it’s about 25cm deep. When I have time I’m hoping to do more videos
Pine is Toxic to reptiles homie
My understanding is if pine has been dried and treated it gives off minimal toxins, on top of that sealing it with paint/ polyurethane would make it safe. Also more of an issue in a small poorly ventilated enclosure
Plan to get ideally an orientalis as my first monitor, this vid was super helpful since there isn’t too much info online about them, what strength and distance is the uvb? Beautiful lizards
Glad you found the video helpful. Pretty much all australian monitors will benefit from a strong desert type UVB (10.0 or 12-14%). Mine are about 30-40cm from the globe
@@Varanibae that’s what I thought, thx for the help
Could you let me know all the materials you used for this? Wanting to build close to the same thing like pond, how much wood, screws, paint etc.. thanks!
Hi Austin, 90x45 h3 pine. 12mm structural grade plywood, pocket hole jig and screws, fencing paint, right bond wood glue. Let me know if you have anything specifically you want to know
What a neat idea. Just subbed
Thank you for the cool ideas. :)
fantastic job.
Thank you!
Haha, the dog dropped his ball in the roach bin. My son and I laughed. 😂
😂 He likes to place his ball in what ever I’m working on to get my attention
What size tubs are you using?
45L IKEA samla tubs
@@Varanibae Thank you! I can definitely see myself doing something like this for my more mid sized lizards like my bearded dragon, skinks, uromastyx and amieva!
Always been the most beautiful animal in Australia for me
Very nice rack system. What size tubs are you using?
Thank you! These are 45L ikea samla tubs
Great videos. May I ask what software you are using for you 3D designs and printing?
This is awesome! How large will this specific monitor get? I’m currently looking into how to build an enclosure for a black throat monitor! What is the size and dimensions of this one here?
It was a mature 4ft female. The enclosure was 2 x1.2 x1.8m
What temp do you keep yours at? Tank is looking good, are no plants similar to their natural environment?
I keep them at about 27c. No plants is a personal choice. I used to keep a lot of planted tanks and wanted a change. A lot of American cichlids would also rip out plants and being sand sifters I can’t really plant anything into the sand
@@Varanibae damn, that's quite a high temp 😊
What enclosure is this?
4x4x2 FormPly glass front enclosure I built myself
Amazing work!
Thanks!
PEACE🍁 🌏✌🏿🐸
What's filtration system
Eheim professional 3
one thing missing..... ROOM monitors needs alot of room to roam. imho, this is not cool
I’ve tried raising hatchling monitors in larger enclosures but there’s always one or two that never do well because they hide far from the hot spot and never come out to eat. More room can be given when they are older and more established.
jump scare at the end
Just started looking at breeding woodies and this video is excellent 👍
Thanks! Good luck with the breeding
That really nice man 🔥🔥🔥🔥
Thanks!
How do you clean dirt stuck to the cage?
3:30 The dog at the back throwing his ball into one of the containers lol
He deliberately does that. He’d also drop it into my buckets when I’m doing water change for my aquarium.
Fantastic! - I have searched everywhere for something like this. Are you able to either share the STL or prinmt one for a price?
Stl not for sale sorry, if you’re in Australia I can send you one
That would be fantastic! How can we arrange that? Thanks!
@@markanddayatonellato6969 either reach out on Instagram or leave me your email here
Hi mate, what's your insta name?
Im trynna figure out a size I can make for my red tail boa , she loves to climb to and about 41/2 years
You make these enclosures?
Yes I made them myself, will eventually do a video of the build
I don't need the video, but it's extremely well done and filled with good information. Wish all guides on KZread were like this.
Thank you!
I knew alot of people were able to tame their monitor lizards, but I would take a tegu over them all day of the week, my tegu never even strike at me to this day, the worst he does is just tail whipping when I'm not carrying him properly.
Thanks you!
Your videos are so well done man keep it up this channel will blow up
This is so awesome man
Thank you!
Beautiful reptile room🐍🦎
hello i am working on launching a tank and was wondering if your willing to sell me your design or for the prototypes atleast let me use your design if i give credit
Hi, unfortunately this design is still in development and I’m not looking at selling it at this stage
What do you use for nesting substrate and what’s the ratio?
50/50 fine coco peat and play sand
Looks great!! Do you have a list of supplies that you used?
Thanks! 1 inch aluminium tubes and nylon connectors, 3mm acrylic sheets, 3mm aluminium composite panel. Let me know if there’s a particular part you saw in the vid that you can’t find
@@Varanibaethanks the reply! I was curious about how you did the lighting
@@BlackAurumArt the only lighting in there is the led strips, all the electrical supplies for that was from ebay. The cool white 12v led strips were placed into aluminium led channels that were mounted on a 45degree angle using 3d printed brackets. There are holes in the aluminium frame so that the wiring can be fed into the hollow aluminium tubs and be hidden. A female dc Jack was used so that the power supply for the led strip can be unplugged from the rack system if required
@@Varanibaethank you so much for the detailed response! 🫡
How many Sveni in that tank. And how many are males to females. I’m looking at getting a group for my 150 gallon
Group of 6 close to fully grown sveni in that tank. I believe 4males 2 females, had them since they were small so didn’t run into any issues with not getting ratios right
Fantastic vidoe, you should sell these in aus 👏 great innovation
You need to start your own company making this kind of stuff. Great work again as usual 🙌 keep up the great work and wish you all the best and hope you have a great weekend bud 🙋♂️✌️
Thank you mate! Difficult to scale up to a business the way I’m currently doing things. It just takes too much time for each project, it’s for my own enjoyment and satisfaction mainly
@@Varanibae well keep it up because your inspiring bud and we need that in the hobby so hopefully more people will push the envelope on how they keep and care for their pets. I always enjoy watching your videos and getting new ideas maybe one day I can get some blueprints from you if I ever get. 3d printer I’d definitely pay for the prints you deserve it man. Hope you have a great weekend and wish you all the best 🙋♂️✌️
Almost $3.50-$6 per foot very expensive lol
Do you know what I can use instead? I’m always looking for ways to cut cost in this hobby
what 3D printer do you use? Great videos aswell loving them
I used to have the ender 3 which gets the job done but the speed and quality is much better ever since upgrading to the bambu p1p.
copying this!!
I’m in the middle of designing version 2 of these nest boxes. The only annoying thing about this design is all the wiring are fed through from the outside of the enclosure through a hole, I can’t take the nest box itself out of the enclosure without dismantling it. Version 2 will have in built thermostat and cables that can disconnect