Hi can you please tell me that if we start a business on anime pattern or design (clothing brand) is their need to take permission for don't get copyright And also what if we didn't take the permission and our business got successful then they copyright us what should we do ? Plz ans
@vekudazo6999Ай бұрын
The background music is a tad too loud, I couldnt catch a few words. But this was really helpful, thanks
@jimrosado9890Ай бұрын
THAT MUSIC BRO WTF
@onelasttime57212 ай бұрын
thank you
@thevvizard8232 ай бұрын
How many stitches are in this design? I went from 105,000 to 53,000. i feel this is still too many
@Yuvrajsingh77msg2 ай бұрын
How i purchase stablizer and adhesive spray. Give me link
@agurule16322 ай бұрын
Couldn’t focus on what you were saying due to the music
@zerogooden2 ай бұрын
what application did you using?
@Fab.Studio_2 ай бұрын
what computer do you use? I am a Mac use new to this and windows is annoying
@YvngSoto2 ай бұрын
Awesome tutorial! Thank you for taking the time to explain everything so well!
@zxgod64993 ай бұрын
Bro what about the jumb stich
@RS-vd2nr3 ай бұрын
I have Hatch 2, is there a keyboard short cut key to hold down while digitizing to change nodes to curve as you digitize?
@Valleygirl4lifeCreations3 ай бұрын
Good video, how do you get the camera to show us what you’re doing on the computer and to zoom in?
@rsmadrid13 ай бұрын
What a great video! Thank you very much
@cuyilina3 ай бұрын
you are the best I was trying to learn how to use the program but its hard finding good information!
@user-ib2yt1mr1i3 ай бұрын
brother app name
@Danimate_73 ай бұрын
I would absolutely loveeeee to own a machine with more needles😂😭. It’s so time consuming to constantly rethread and even wind up bobbins. But I guess this is the goal I should work towards. Do make a video on how you gained customers or clients.
@Danimate_73 ай бұрын
So what I want to do is put the outline right after the filled shaped in the sequence. Just wanna make sure. I’ve done so where I put all the outlines in the last part of the sequence because they are usually the same color but at the same time I have noticed the outline being imperfect 😂😭.
@asdfghjklyeldy4 ай бұрын
just found your video after watching so many beginners' friendly videos and this is the first video that really helped me understand. thank you so much for sharing. :)
@oriontv36334 ай бұрын
What version should I buy for this tutorial? Is it the Digitizer?
@savanlathiya874 ай бұрын
Can you send me this software link?
@wordofknowledgeknowledge85264 ай бұрын
Hello sir hope all is well with you. Just wanted to know if you are still going to put out more beginner tutorials about embroidery. I have been trying out hatch, and I have embrilliance, and I have tried inkskape. Still learning
@Vladtapes6665 ай бұрын
Excellent video and I have a question, how much was the cost of that software you use?
@buboi27525 ай бұрын
Good tips, thank you.
@amberstorms4605 ай бұрын
Is Hatch free?
@hadigamerzshorts0995 ай бұрын
Which app do you use?
@lydiablackmore23615 ай бұрын
Anime hoddle is awesome ❤❤❤❤❤❤❤❤
@mikesaephan43766 ай бұрын
Great video very informative thank you so much. I appreciate what you’ve done This is exactly what I needed.✅ 🙏🙏🙏
@hiluluktensai93926 ай бұрын
Hey man, i just got my embroidery machine and i been looking around for a while, may i ask what this software that youre using? It amazes me even after watching 10 videos, how much would it cost me fully? I would appreciate it if you reply brother
@wizkidd20796 ай бұрын
It's hatch 3 embroidery software and it's around $1000. You can get a month free with full experience with the software. I highly recommend hatch 3. Super easy to use.
@iskandar93496 ай бұрын
hello sir , what software did you use sir ?
@andreiiacob64436 ай бұрын
Super cool. i wanna start an anime embro too. do you have any problems with the copywrite? i cant seem to find answers to this q or people just seem to not care to answer
@farhancharolia53166 ай бұрын
Do you need copyrights for anime embroidery?
@DanielDaVinciArt6 ай бұрын
Greetings, Love your video explanation. I wanted to know if you could save your embroidery artwork as a transparent PNG after digitalizing it
@truestories59997 ай бұрын
Can I know which package is the best from Hatch for a beginner ....i mean a suggestion
@4evNaruto4eva7 ай бұрын
Thank you so much! I appreciate the clear explanation!
@TheSevonne7 ай бұрын
where can I find a good digitizer? I need some work done of some intricate images
@LS-wp6wo7 ай бұрын
this is the best video i've seen so far! i feel like i understand it and i'm excited to try tomorrow
@justjam-dt4sr12 күн бұрын
What's this called office software
@Impress_s7 ай бұрын
Hello dear friend, how can I contact you?
@Impress_s7 ай бұрын
Hello dear friend, how can I contact you?
@thiagoaraagao8 ай бұрын
Keep going with the videos bro! You are necessary
@thiagoaraagao8 ай бұрын
Thank you for the video!
@easyshorts05708 ай бұрын
bro can i know the software
@benhmidaamir62938 ай бұрын
thank for this amazing video , waiting to see more from you
@danielleross11258 ай бұрын
Even with built in pull comp on hatch, my designs end up with my tarami embroidery not lining up with the outlines and I always have to do trial and error increasing the objects for manual pull comp, and stitch it out like 5 times with little changes before it comes out right. Do you have any tips for getting it perfect the first time? I have a babylock flare so probably not the machine
@nexo82568 ай бұрын
I going to sub cause you deserve it
@nexo82568 ай бұрын
Nice
@danielbarrios31719 ай бұрын
How did you delete the back ground
@sunrisetacticalgear26769 ай бұрын
New sub, slowly learning to digitize with Hatch.
@gabriellrosacarrion32939 ай бұрын
Your videos are so good. I made a few designs and they come out clean on one side but the other side the line work is off. I would think hooping is the issue but why only 1 side and across multiple different designs. Any ideas anyone ? Also didnt layer it like you had said to (Color followed by the outline)
Пікірлер
YUUJI!!!
Hi can you please tell me that if we start a business on anime pattern or design (clothing brand) is their need to take permission for don't get copyright And also what if we didn't take the permission and our business got successful then they copyright us what should we do ? Plz ans
The background music is a tad too loud, I couldnt catch a few words. But this was really helpful, thanks
THAT MUSIC BRO WTF
thank you
How many stitches are in this design? I went from 105,000 to 53,000. i feel this is still too many
How i purchase stablizer and adhesive spray. Give me link
Couldn’t focus on what you were saying due to the music
what application did you using?
what computer do you use? I am a Mac use new to this and windows is annoying
Awesome tutorial! Thank you for taking the time to explain everything so well!
Bro what about the jumb stich
I have Hatch 2, is there a keyboard short cut key to hold down while digitizing to change nodes to curve as you digitize?
Good video, how do you get the camera to show us what you’re doing on the computer and to zoom in?
What a great video! Thank you very much
you are the best I was trying to learn how to use the program but its hard finding good information!
brother app name
I would absolutely loveeeee to own a machine with more needles😂😭. It’s so time consuming to constantly rethread and even wind up bobbins. But I guess this is the goal I should work towards. Do make a video on how you gained customers or clients.
So what I want to do is put the outline right after the filled shaped in the sequence. Just wanna make sure. I’ve done so where I put all the outlines in the last part of the sequence because they are usually the same color but at the same time I have noticed the outline being imperfect 😂😭.
just found your video after watching so many beginners' friendly videos and this is the first video that really helped me understand. thank you so much for sharing. :)
What version should I buy for this tutorial? Is it the Digitizer?
Can you send me this software link?
Hello sir hope all is well with you. Just wanted to know if you are still going to put out more beginner tutorials about embroidery. I have been trying out hatch, and I have embrilliance, and I have tried inkskape. Still learning
Excellent video and I have a question, how much was the cost of that software you use?
Good tips, thank you.
Is Hatch free?
Which app do you use?
Anime hoddle is awesome ❤❤❤❤❤❤❤❤
Great video very informative thank you so much. I appreciate what you’ve done This is exactly what I needed.✅ 🙏🙏🙏
Hey man, i just got my embroidery machine and i been looking around for a while, may i ask what this software that youre using? It amazes me even after watching 10 videos, how much would it cost me fully? I would appreciate it if you reply brother
It's hatch 3 embroidery software and it's around $1000. You can get a month free with full experience with the software. I highly recommend hatch 3. Super easy to use.
hello sir , what software did you use sir ?
Super cool. i wanna start an anime embro too. do you have any problems with the copywrite? i cant seem to find answers to this q or people just seem to not care to answer
Do you need copyrights for anime embroidery?
Greetings, Love your video explanation. I wanted to know if you could save your embroidery artwork as a transparent PNG after digitalizing it
Can I know which package is the best from Hatch for a beginner ....i mean a suggestion
Thank you so much! I appreciate the clear explanation!
where can I find a good digitizer? I need some work done of some intricate images
this is the best video i've seen so far! i feel like i understand it and i'm excited to try tomorrow
What's this called office software
Hello dear friend, how can I contact you?
Hello dear friend, how can I contact you?
Keep going with the videos bro! You are necessary
Thank you for the video!
bro can i know the software
thank for this amazing video , waiting to see more from you
Even with built in pull comp on hatch, my designs end up with my tarami embroidery not lining up with the outlines and I always have to do trial and error increasing the objects for manual pull comp, and stitch it out like 5 times with little changes before it comes out right. Do you have any tips for getting it perfect the first time? I have a babylock flare so probably not the machine
I going to sub cause you deserve it
Nice
How did you delete the back ground
New sub, slowly learning to digitize with Hatch.
Your videos are so good. I made a few designs and they come out clean on one side but the other side the line work is off. I would think hooping is the issue but why only 1 side and across multiple different designs. Any ideas anyone ? Also didnt layer it like you had said to (Color followed by the outline)