Пікірлер

• 
  @lakeenabrown334823 күн бұрын

  Can’t wait to try this. So clear and concise

• 
  @DFSP656 ай бұрын

  Thanks so much for simplyifying this tutorial, its helped A LOT 👌 x

• 
  @Alpha_DTF_Print7 ай бұрын

  The level of creativity in your designs is outstanding! 🔝 Ever tried DTF printing? @‌AlphaDTFPrint's post is packed with insights. Immerse yourself in vibrant colors and impeccable details. 🎨👕

• 
  @garypostell52688 ай бұрын

  Is the pen res useable ?

• 
  @koalafan15769 ай бұрын

  The music overpowers the vocals.

• 
  @cindywhittaker877911 ай бұрын

  Thank you I have been struggling with learning how to make a basic card your video help me make my very first card. Although I have to redo it, I learned a lot. I used to fine a font

• 
  @jeangrandy8672 Жыл бұрын

  How do you figure out what size envelope to make for the card and where do you find it in Design Space?

• 
  @DebsJoyfulDesigns Жыл бұрын

  I’ve personally not had great luck with trying to make envelopes, so I usually buy the envelopes! You just want to make sure the envelope is slightly larger than your final card dimensions.

• 
  @jeangrandy8672 Жыл бұрын

  @@DebsJoyfulDesigns thank you!

• 
  @kathyjohnson2091 Жыл бұрын

  How do get the wood around the design not to discolor ?

• 
  @DebsJoyfulDesigns Жыл бұрын

  Hey! The stencil should be well adhered to keep the ink from leaking through. After you’ve colored the design, if you are worried about the wood discoloring you could always seal it with a spray sealer to keep it from discoloring! I usually use water based sealant - it is a little harder to find, but the oil based sealant tends to discolor a bit.

• 
  @lovnbnhome Жыл бұрын

  Music in background is too loud.

• 
  @dinolaurier1069 Жыл бұрын

  Did you use permanent Vinyl?

• 
  @arnessad16 Жыл бұрын

  Do you know how to cut it without saving the middle part of the A'a and O's without saving the pieces?

• 
  @JPongvichaicharoen Жыл бұрын

  Would you not be able to just do it as a square thats sized vs doubling size and scoring?

• 
  @wvp07 Жыл бұрын

  There you are! 👋How stinking cute are you! Third vid in, love what you do! 👊

• 
  @wvp07 Жыл бұрын

  Super cute! Can't wait to show this video to my daughter.

• 
  @wvp07 Жыл бұрын

  From one maker to another, awesome craft! I've watched over a half dozen wood and cricut videos tonight and this was the best so far. The others weren't terrible, just too much for what I like. Gonna check your channel and see what else you're doing!

• 
  @rocioareizaga1154 Жыл бұрын

  I just got a Cricut and your videos have help. You have lots of tip. Thanks

• 
  @suewooton796 Жыл бұрын

  Some are a bit quick and you can't see what they are clicking on needs to be slower and show you what they are clicking on sorry its not that easy

• 
  @SheWritesHerJourney_ Жыл бұрын

  This is super cute!

• 
  @TV-gy1nf Жыл бұрын

  Very good explanation. Great video. Music little loud but it could be just me.

• 
  @daniellewright5906 Жыл бұрын

  Thank you!! I was able to follow along easily to make my first card!

• 
  @lindab4652 Жыл бұрын

  Sorta disappointed, I got through most of the video skipping as much as I could, to get to the current part. I received a wood burning kit for my birthday and, wanted to learn how to use it, with a cricut stencil...

• 
  @mariahstanford Жыл бұрын

  I’ve seen alternative ways to do this that seem more efficient and with better results. Keep searching, good luck!

• 
  @eddaoo Жыл бұрын

  Thanks for sharing, great beginner tips

• 
  @clauditalopez6192 Жыл бұрын

  Thanks girl!!!❤

• 
  @DebsJoyfulDesigns Жыл бұрын

  Thanks for watching!!

• 
  @watson_on_tour Жыл бұрын

  Thank you for this Tutorial. It helps alot 😊

• 
  @DebsJoyfulDesigns Жыл бұрын

  Thanks for watching!

• 
  @jennk1006 Жыл бұрын

  Can I use card stock or paper from anywhere? Or do I HAVE to use Cricut material?

• 
  @DebsJoyfulDesigns Жыл бұрын

  Yes definitely! You can use any cardstock you want!

• 
  @augenblickglobal7086 Жыл бұрын

  I live it

• 
  @homedad3324 Жыл бұрын

  I am so interested in the content but the background music was so annoying to me. I had to stop watching because of it.

• 
  @VeronicaJones58 Жыл бұрын

  ✅✅✅✅♥️🎁

• 
  @VeronicaJones58 Жыл бұрын

  ♥️♥️♥️♥️♥️ What font name did you use for the ‘D’? Beautiful

• 
  @DebsJoyfulDesigns Жыл бұрын

  Thank you! The font is Mahogany Script Std Regular. It is available on Cricut design space!

• 
  @VeronicaJones58 Жыл бұрын

  Thank you … just found you..awesome tutorial

• 
  @carolynverla3080 Жыл бұрын

  I've been looking for beginning help on making cards. THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!

• 
  @DebsJoyfulDesigns Жыл бұрын

  Thanks for watching!

• 
  @kaylaaltamirano32642 жыл бұрын

  What don’t did you use for the Ellison name?

• 
  @DebsJoyfulDesigns Жыл бұрын

  Thanks for watching! The font is “Great Vibes.” You can get it on creative fabrica!

• 
  @elizabethsmith21382 жыл бұрын

  Great instructions. Thank you!

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Thanks for watching!

• 
  @sarahp11672 жыл бұрын

  Thank you for this!! Not only is this a great beginner tutorial, but it also shows how much you can make without buying expensive Cricut cards and inserts! 🤗

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Thanks so much for watching! That was my goal, the inserts are of course convenient but so expensive!

• 
  @francinegarcia77132 жыл бұрын

  With your tutorial I made my first card. Your video is easy to follow. Now I have to learn how to make an envelope. Thank you!!

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Thanks for watching!! So glad it was helpful! ❤️

• 
  @crysr.87392 жыл бұрын

  Awesome Job!! I have to make my 1st card using my Circuit Maker 3...Thanks for the tutorial!! 😌I just subscribed!! I loved how you explained every detail...thanks again!!💖💖

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Thanks so much for watching!! ❤️❤️

• 
  @rebekahgilden78662 жыл бұрын

  It didn't look like regular vinyl, can you tell me the name of the pen and vinyl you used? Great video!

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Hey! Thanks so much for watching ❤️ Here is the link to the marker: amzn.to/3H9A8vw and the vinyl: amzn.to/3kfZgXp. I use Cricut’s removable vinyl for all my stencils!

• 
  @TiffaniTube6222 жыл бұрын

  This is a perfect beginners card! I was able to make my dad a nice father’s day card with this tutorial

• 
  @DebsJoyfulDesigns2 жыл бұрын

  That’s awesome! Thanks for watching! ❤️

• 
  @The2Strats2 жыл бұрын

  Which brand markers are you using and where can I buy them?

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Hey! I got it on Amazon! There are several brands available, but this is the one I used: amzn.to/3H9A8vw

• 
  @teresaduncan67942 жыл бұрын

  Love it

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Thanks for watching! ❤️

• 
  @livindalife082 жыл бұрын

  Nice and simple. What program are you using, can this be done in Word another program? Thanks!

• 
  @DebsJoyfulDesigns2 жыл бұрын

  This was done in Cricut design space! Yes, it can be done in plenty of other programs as well. The steps would potentially be different depending on what program you use though.

• 
  @The2Strats2 жыл бұрын

  How do you like your heat marker as compared to scorch marker? Where can I get one and how much did it cost?

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Hey! They seemed about the same to me, but I’d be curious to hear from anyone who has tried both! The link to the one I used is in the video description!

• 
  @jenniferlynch50772 жыл бұрын

  I stumbled on this. KUDOS AND THANKS for a great lesson

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Thanks so much for watching!

• 
  @yvonnetucker14162 жыл бұрын

  so nice

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Thanks so much for watching!

• 
  @kerrinpantano48852 жыл бұрын

  Can you tell me what sizes you made the card and the insert?

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Hey there! Yes, the card is 8.5 inches by 5.5 inches and the insert is 4 inches by 5.25 inches. Thanks for watching!

• 
  @classykathy12 жыл бұрын

  This is my first time making any card. Your instructions were very clear and easy to follow. Thank you so much tor the video it was of great help.

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Awesome! So glad it was helpful!

• 
  @hananm28682 жыл бұрын

  Does the paint underneath the stencil not come off when you remove the stencil?

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Hey! It shouldn’t! Using removable vinyl helps a lot with this. You also want to make sure the undercoat of paint has had plenty of time to dry all the way. Certain removable vinyl works better for this in my opinion. Sometimes you have to play with it a little bit to find the right one for you! I have my favorite one linked in the description! Thanks for watching!

• 
  @MrsHoskins12 жыл бұрын

  Your tutorial is way easier than most that I've seen.

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Thanks so much for watching!

• 
  @guesswhat24762 жыл бұрын

  Can you post the link for the machine please ❣️

• 
  @DebsJoyfulDesigns2 жыл бұрын

  It is a Shapeoko XL 3 from Carbide 3D! You can check it out here: shop.carbide3d.com/collections/machines/products/shapeoko4?variant=33051555954749 Thanks for watching! ❤️

• 
  @guesswhat24762 жыл бұрын

  Beautiful ❣️❣️❣️

• 
  @DebsJoyfulDesigns2 жыл бұрын

  Thank you!