Do you have a link for the rotary dampers in Europe? I cannot find them for a reasonable price at all. Do you have an alternative to that? (Besides the Teflon washers)
@rightrudderleftstickКүн бұрын
Misumi stocks them I believe
@neocalder12282 күн бұрын
Oh yeah I'm excited
@zoeyzhang98662 күн бұрын
Nice Update!
@f15sim3 күн бұрын
Nice job! +1 for the design, -9999 for the vertical video. ;)
@rightrudderleftstick3 күн бұрын
Just showing a lil leg ;)
@12Alitat3 күн бұрын
I love options and flexibility!! 😊
@memeswithoutcontext47167 күн бұрын
That's the throttle grip right? As far as I know you can use it for F86 to.
@rightrudderleftstick3 күн бұрын
The F86 actually has a slightly different shape underneath around where you grasp it with your fingers, but functionally they are very similar.
@andrewparker9777 күн бұрын
I highly doubt I'll build this stick anytime soon however, the office chair mount is brilliant. I'll definitely be looking for those files and modifing something for my setup. Everyone has an office chair and something to hold the stick and pedals at a fixed reference is a must!
@MozTS12 күн бұрын
Make an octagonal gate so you can play smash with a massive joystick
@rasticool21 күн бұрын
The TLE 5010/5011 Boards are difficult to source in Germany (even Aliexpress doesnt provide them atm). Do you have any ideas or alternatives?
@rightrudderleftstick21 күн бұрын
This won't ship to germany? www.aliexpress.com/item/1005001448602325.html
@rasticool20 күн бұрын
@@rightrudderleftstick That's weird, they are not listed in my search. Thanks a lot!
@12Alitat23 күн бұрын
Will the toe brake function be axis or buttons? And will it be possible to lock the rudder function in place (in case i only wanna use the toe brakes)?
@MozTS23 күн бұрын
Seems like 3D printed racing pedals is what ur after
@rightrudderleftstick22 күн бұрын
You mean like the winwing pedals? Its interesting possiblity to add like a pin that can lot the pedal movement, but on the other hand, if someone can print the pedals they could also possible 3d print racing pedals too which are more dedicated.
@12Alitat22 күн бұрын
@@MozTS I am after both! ;)
@12Alitat22 күн бұрын
@@rightrudderleftstick That is true, i could print racing pedals. Just thought that it would be great to have both in one device. And i trust your designs so i would not need to print racing pedals i have less trust in :)
@rightrudderleftstick22 күн бұрын
@@12Alitat Yeah, especially since if you are going to DIY racing pedals it would be good to have a clutch too. Though I think locking the pedal axis wouldn't be too complicated, just need a pin or something that can pass through the mechanism. Put it on the idea board for now.
@theeltea24 күн бұрын
I hate to say it but maybe it's time to ditch spring loaded controls for FFB
@rightrudderleftstick23 күн бұрын
Want to keep this as a low cost option, but once I get the design out, i am going to get one of those vpforce motors and come up with a mouting option for ffb pedals. Have a large gear ⚙️ replace the cam roller and the motor mount off the back. Its extra $$$ so gotta wait for the patreon fund to pool over time
@theeltea23 күн бұрын
@@rightrudderleftstick exactly what I had in mind
@theeltea23 күн бұрын
@@rightrudderleftstick check out FFBeast, it is diy oriented
@pawe225024 күн бұрын
UNREAL TOURNAMENT 😢❤❤❤
@3fus25 күн бұрын
Unreal music. :-)
@leniwyjurgen674024 күн бұрын
Agree 😀🤙
@rightrudderleftstick23 күн бұрын
M-m-m-m-mother kill
@ChristinanathanWesterfie-pr4jj25 күн бұрын
This is Exactly what we need to interface with mobile simulators as well...Bluetooth or if possible, type c to USB (powered hub) perhaps?!!
@rightrudderleftstick23 күн бұрын
I saw some people hooking up usb controllers to a standalone quest vr sim, i wonder if i would need to figure out how to emulate an xinput device over usb. Something to put on the project kanban for future
@ChristinanathanWesterfie-pr4jj23 күн бұрын
@@rightrudderleftstickset it up so the stick (via release pin) can fold forward, allowing the platform to be put away (like stowing an ironing board/ total gym) under bed or in a garment style bag to be hung behind a door...all you need is a throttle stand that is adjustable fore and aft, up and dwn. Brilliant!! This needs to go to market. Connect to Any console, pc, device, integrated calibration app to set "dead zones", responce sensitivity. Add VR and done! Cheers!!
@12Alitat25 күн бұрын
This looks awesome!!! Can’t wait! :)
@ChristinanathanWesterfie-pr4jjАй бұрын
This is Exactly what we need (with appropriate bluetooth electronics) to adapt to apps as well!! Bravo! Cheers!!
@philipjensen6442Ай бұрын
where did you buy the quality damper?
@rightrudderleftstickАй бұрын
I actually got it from amazon.ca back when I was living in Canada, Cruising aliexpress seems to be very difficult to find something that looks right. I think the best bet is order from somewhere that has a good return policy and testing them when it arrives to see if it's a good one.
@cosmodromedesignbureauАй бұрын
first
@12AlitatАй бұрын
Heyhey, i printed your gimbal and chair mount, i love it! All that is missing now is the rudder pedals. Any estimation on when you are going to release them? (sorry for being impatient! :D) I checked other models on thingiverse/printables but i developed a lot of trust in your designs, so i only wanna use yours!
@rightrudderleftstickАй бұрын
work has kept me away from my workshop for the last month, but i hope I have a long enough stretch of time back to get them out before August
@12AlitatАй бұрын
@@rightrudderleftstick Thank you very much! that woule be awesome!
@CmuhneyАй бұрын
So I built this base, and it is great, but I can't seem to get my Virpil WarBRD grip to work with it. Only seeing the inputs from trigger, up on the top 8-way hat, and one of the directions on the 5-way hat. Any suggestions to try out?
@rightrudderleftstickАй бұрын
It should work in TM compatibility mode, are you using an arduino or freejoy as the microcontroller?
@MozTS2 ай бұрын
Lmao at the music choice
@rightrudderleftstick2 ай бұрын
These are what the pedals were originally based on: www.thingiverse.com/thing:3475445
@dempa32 ай бұрын
Great work! Have you seen the FFBeast project? I think I'd be great if you could somehow combine efforts!
@rightrudderleftstick2 ай бұрын
It definitely looks really cool, may look into an add-on to the pedals in the future that can mount a drive motor directly.
@vojtechvacek47832 ай бұрын
Isn't the gear on potentiometer introducing too much freeplay/backlash?
@rightrudderleftstick2 ай бұрын
The top of the pedals aren't actually printed yet, so they are very sloppy. The gears are actually for rotary dampers, as a more affordable alternative to damping the motion to a steering piston.
@vojtechvacek47832 ай бұрын
I really like this design. People sometimes rely on simple springs to pull pedals back in a hope they gonna end up centered. This is the right way to do it.
@vojtechvacek47832 ай бұрын
Will they have toe brakes as well?
@rightrudderleftstick2 ай бұрын
Future plans. Still a w.i.p. (Doesn’t even have a top plate yet)
@ChristinanathanWesterfie-pr4jj2 ай бұрын
We need this to be bluetooth or type C to use with flight simulator apps...a worthy candidate flying solo would be Sky on Fire but foe Massive Multiplayer WWI Air Combat, Fighter Wing 3.1 demands rudder input! Cheers!!
@tobi31423 ай бұрын
Nice👍
@samajier25663 ай бұрын
Fantastic
@user-rj6dh3mh3k3 ай бұрын
Incredible work! Any plans for an actual joystick head (like the Tornado one you have?)
@rightrudderleftstick3 ай бұрын
I recommend checking out TheSimNet's channel, he offers all sorts of 3d printable flight grips.
@JackSun4133 ай бұрын
Excellent idea! Good Job! 非常棒的作品!
@TheBod763 ай бұрын
Fantastic work! And big thanks for making it all publically available!!
@ChristinanathanWesterfie-pr4jj3 ай бұрын
3D printed F-14 Throttles to adapt to Suncom SFS or Warthog. If you run out of project ideas. UFC master switch board would be Greatly Appreciated as well (sepperated tandem F-14 Familiarization Environment is my goal as I'd suspect if build as a single enclosure would be too big, too hot and too inconvenient to enter and exit if VR induced vertigo forces the R.I.O. to punch out in a motion sickness induced emergency. Air sick bags omitted to reduce operational costs LOL! Cheers!!
@rightrudderleftstick3 ай бұрын
There is actually a really good f-14 throttle quadrant project on thingiverse
@rightrudderleftstick3 ай бұрын
www.thingiverse.com/thing:6373801
@chesingleton17873 ай бұрын
Great video 👍
@cosmodromedesignbureau3 ай бұрын
What's that throttle?
@rightrudderleftstick3 ай бұрын
It’s just something a threw together from spare parts. My big F/A-18 throttle is still in storage
@chesingleton17872 ай бұрын
@@rightrudderleftstick ever think about designing an open source throttle or just gonna stick with updating the stick and working on the rudders for now?
@rightrudderleftstick2 ай бұрын
@@chesingleton1787 there are so many great throttle projects out there that I think for my setup I'd just make a really basic "bushplane" lever for completeness and maybe support the bracket for mounting the Authentikit series of quadrants to the rig
@chesingleton17872 ай бұрын
@@rightrudderleftstick checked out Authentikit seems pretty cool, do you know of any good diy modern throttles haven't been able to find a good one so far
@rightrudderleftstick2 ай бұрын
@@chesingleton1787 check out the hotas diy projects channel as there are a lot of great projects there
@theeltea3 ай бұрын
Any particular reason you are soldering wires instead of using connectors and crimping the leads?
@rightrudderleftstick3 ай бұрын
Video was already way too long, but crimping leads is definitely the recommended method if you have the tools (and patience)
@theeltea3 ай бұрын
Nice ProMicro/Bluepill board. But with fake bluepills flooding the market, I have to desolder and swap fake MCUs with geniune STMicroelectronics MCUs just to get FreeJoy 1.7.1 to work.
@bjbruun3 ай бұрын
Is there any chance that you will release the f18 throttle soon?
@rightrudderleftstick3 ай бұрын
I actually recommend looking into the OpenHornet beta release, that project's throttle is so much more complete and accurate there is no need for me to add anything.
@12Alitat3 ай бұрын
Love this design, absolutely great and thoughtful work!! Thank you!!
@neocalder12283 ай бұрын
very excited for the pedals
@thesimnet3 ай бұрын
Fantastic! The breakout board is a gamechanger! Bravo!
@wardker3 ай бұрын
love your work. It really matters!!
@USERNAME-bw9fc3 ай бұрын
Sounds like belt skipping
@rightrudderleftstick3 ай бұрын
It was actually an internal bearing failure, removing the belt spindle had some pieces of the bearing fall out.
@rglasinovic3 ай бұрын
Great work. What about a Force Feedback version?
@rightrudderleftstick3 ай бұрын
VPForce is just too good! Not worth replicating the work
Пікірлер
That doom song tho.. 🤘
Do you have a link for the rotary dampers in Europe? I cannot find them for a reasonable price at all. Do you have an alternative to that? (Besides the Teflon washers)
Misumi stocks them I believe
Oh yeah I'm excited
Nice Update!
Nice job! +1 for the design, -9999 for the vertical video. ;)
Just showing a lil leg ;)
I love options and flexibility!! 😊
That's the throttle grip right? As far as I know you can use it for F86 to.
The F86 actually has a slightly different shape underneath around where you grasp it with your fingers, but functionally they are very similar.
I highly doubt I'll build this stick anytime soon however, the office chair mount is brilliant. I'll definitely be looking for those files and modifing something for my setup. Everyone has an office chair and something to hold the stick and pedals at a fixed reference is a must!
Make an octagonal gate so you can play smash with a massive joystick
The TLE 5010/5011 Boards are difficult to source in Germany (even Aliexpress doesnt provide them atm). Do you have any ideas or alternatives?
This won't ship to germany? www.aliexpress.com/item/1005001448602325.html
@@rightrudderleftstick That's weird, they are not listed in my search. Thanks a lot!
Will the toe brake function be axis or buttons? And will it be possible to lock the rudder function in place (in case i only wanna use the toe brakes)?
Seems like 3D printed racing pedals is what ur after
You mean like the winwing pedals? Its interesting possiblity to add like a pin that can lot the pedal movement, but on the other hand, if someone can print the pedals they could also possible 3d print racing pedals too which are more dedicated.
@@MozTS I am after both! ;)
@@rightrudderleftstick That is true, i could print racing pedals. Just thought that it would be great to have both in one device. And i trust your designs so i would not need to print racing pedals i have less trust in :)
@@12Alitat Yeah, especially since if you are going to DIY racing pedals it would be good to have a clutch too. Though I think locking the pedal axis wouldn't be too complicated, just need a pin or something that can pass through the mechanism. Put it on the idea board for now.
I hate to say it but maybe it's time to ditch spring loaded controls for FFB
Want to keep this as a low cost option, but once I get the design out, i am going to get one of those vpforce motors and come up with a mouting option for ffb pedals. Have a large gear ⚙️ replace the cam roller and the motor mount off the back. Its extra $$$ so gotta wait for the patreon fund to pool over time
@@rightrudderleftstick exactly what I had in mind
@@rightrudderleftstick check out FFBeast, it is diy oriented
UNREAL TOURNAMENT 😢❤❤❤
Unreal music. :-)
Agree 😀🤙
M-m-m-m-mother kill
This is Exactly what we need to interface with mobile simulators as well...Bluetooth or if possible, type c to USB (powered hub) perhaps?!!
I saw some people hooking up usb controllers to a standalone quest vr sim, i wonder if i would need to figure out how to emulate an xinput device over usb. Something to put on the project kanban for future
@@rightrudderleftstickset it up so the stick (via release pin) can fold forward, allowing the platform to be put away (like stowing an ironing board/ total gym) under bed or in a garment style bag to be hung behind a door...all you need is a throttle stand that is adjustable fore and aft, up and dwn. Brilliant!! This needs to go to market. Connect to Any console, pc, device, integrated calibration app to set "dead zones", responce sensitivity. Add VR and done! Cheers!!
This looks awesome!!! Can’t wait! :)
This is Exactly what we need (with appropriate bluetooth electronics) to adapt to apps as well!! Bravo! Cheers!!
where did you buy the quality damper?
I actually got it from amazon.ca back when I was living in Canada, Cruising aliexpress seems to be very difficult to find something that looks right. I think the best bet is order from somewhere that has a good return policy and testing them when it arrives to see if it's a good one.
first
Heyhey, i printed your gimbal and chair mount, i love it! All that is missing now is the rudder pedals. Any estimation on when you are going to release them? (sorry for being impatient! :D) I checked other models on thingiverse/printables but i developed a lot of trust in your designs, so i only wanna use yours!
work has kept me away from my workshop for the last month, but i hope I have a long enough stretch of time back to get them out before August
@@rightrudderleftstick Thank you very much! that woule be awesome!
So I built this base, and it is great, but I can't seem to get my Virpil WarBRD grip to work with it. Only seeing the inputs from trigger, up on the top 8-way hat, and one of the directions on the 5-way hat. Any suggestions to try out?
It should work in TM compatibility mode, are you using an arduino or freejoy as the microcontroller?
Lmao at the music choice
These are what the pedals were originally based on: www.thingiverse.com/thing:3475445
Great work! Have you seen the FFBeast project? I think I'd be great if you could somehow combine efforts!
It definitely looks really cool, may look into an add-on to the pedals in the future that can mount a drive motor directly.
Isn't the gear on potentiometer introducing too much freeplay/backlash?
The top of the pedals aren't actually printed yet, so they are very sloppy. The gears are actually for rotary dampers, as a more affordable alternative to damping the motion to a steering piston.
I really like this design. People sometimes rely on simple springs to pull pedals back in a hope they gonna end up centered. This is the right way to do it.
Will they have toe brakes as well?
Future plans. Still a w.i.p. (Doesn’t even have a top plate yet)
We need this to be bluetooth or type C to use with flight simulator apps...a worthy candidate flying solo would be Sky on Fire but foe Massive Multiplayer WWI Air Combat, Fighter Wing 3.1 demands rudder input! Cheers!!
Nice👍
Fantastic
Incredible work! Any plans for an actual joystick head (like the Tornado one you have?)
I recommend checking out TheSimNet's channel, he offers all sorts of 3d printable flight grips.
Excellent idea! Good Job! 非常棒的作品!
Fantastic work! And big thanks for making it all publically available!!
3D printed F-14 Throttles to adapt to Suncom SFS or Warthog. If you run out of project ideas. UFC master switch board would be Greatly Appreciated as well (sepperated tandem F-14 Familiarization Environment is my goal as I'd suspect if build as a single enclosure would be too big, too hot and too inconvenient to enter and exit if VR induced vertigo forces the R.I.O. to punch out in a motion sickness induced emergency. Air sick bags omitted to reduce operational costs LOL! Cheers!!
There is actually a really good f-14 throttle quadrant project on thingiverse
www.thingiverse.com/thing:6373801
Great video 👍
What's that throttle?
It’s just something a threw together from spare parts. My big F/A-18 throttle is still in storage
@@rightrudderleftstick ever think about designing an open source throttle or just gonna stick with updating the stick and working on the rudders for now?
@@chesingleton1787 there are so many great throttle projects out there that I think for my setup I'd just make a really basic "bushplane" lever for completeness and maybe support the bracket for mounting the Authentikit series of quadrants to the rig
@@rightrudderleftstick checked out Authentikit seems pretty cool, do you know of any good diy modern throttles haven't been able to find a good one so far
@@chesingleton1787 check out the hotas diy projects channel as there are a lot of great projects there
Any particular reason you are soldering wires instead of using connectors and crimping the leads?
Video was already way too long, but crimping leads is definitely the recommended method if you have the tools (and patience)
Nice ProMicro/Bluepill board. But with fake bluepills flooding the market, I have to desolder and swap fake MCUs with geniune STMicroelectronics MCUs just to get FreeJoy 1.7.1 to work.
Is there any chance that you will release the f18 throttle soon?
I actually recommend looking into the OpenHornet beta release, that project's throttle is so much more complete and accurate there is no need for me to add anything.
Love this design, absolutely great and thoughtful work!! Thank you!!
very excited for the pedals
Fantastic! The breakout board is a gamechanger! Bravo!
love your work. It really matters!!
Sounds like belt skipping
It was actually an internal bearing failure, removing the belt spindle had some pieces of the bearing fall out.
Great work. What about a Force Feedback version?
VPForce is just too good! Not worth replicating the work