Пікірлер

• 
  @Dinoxt122 күн бұрын

  Good Jobbin'.

• 
  @tb693ny64 күн бұрын

  what size wood are you using these on? 3/4 or 1/2 inch?

• 
  @fallen4life0808 күн бұрын

  How long to let it cure? I sprayed my rear seats until it was all black (what I consider 1 coat) them again for a second coat and used the seats 2 days later on a long trip and the abrasions from peoples clothes and weight began to rub it off. Anything I need to do to seal it? Or add another coat?

• 
  @Juanchito56214 күн бұрын

  Just bought one for $80

• 
  @TheHeatherhales198817 күн бұрын

  Does it only slide out 1 side?

• 
  @LifeLessOrdinary18 күн бұрын

  Very nice excited to see a new video, great project

• 
  @sledcrazy528318 күн бұрын

  A chain works will too!

• 
  @TheFurrminator6 күн бұрын

  True, I have used a chain on boards before, works good.

• 
  @vdubing0119 күн бұрын

  How much weight is this adding?

• 
  @antonioguevara418819 күн бұрын

  Can it be made wide enough to fit the back of a pickup truck?

• 
  @guitarweirdo121 күн бұрын

  Thank you for this

• 
  @b-1sauce52521 күн бұрын

  Im looking at this specific one but I’m not sure with so many slides having more possible problems. But More slides means more room though 🤔 hmm

• 
  @youcanthide00422 күн бұрын

  Very Impressive!!

• 
  @ryanschaumleffel632126 күн бұрын

  I was following it well till you were going super fast thanks in advance

• 
  @richardreed6249Ай бұрын

  Has anyone seen ideas for doing this, without welding. I don't weld, and I don't know anyone that does.

• 
  @HerrisYutuiProductionАй бұрын

  Thanks for the idea.. it would help a lot..❤

• 
  @sljack1671Ай бұрын

  Great job! Thanks for inspiring me to do my own!

• 
  @hix9306Ай бұрын

  Is it easy to register these trailers?

• 
  @Forgotten_BoyАй бұрын

  Your camera skills gave me motion sickness. I had to stop watching, sorry. Cheers 🎉

• 
  @MrDonnyburhanАй бұрын

  any idea on what to type of channel to use for 3000mm long drawer ?

• 
  @devo076Ай бұрын

  Thanks for the video! Straight forward and no screwing around. I'll be trying this soon in my house!

• 
  @skyegirlАй бұрын

  My outdoor “shower” has a squirt gun attachment and a coiled hose. Some sort of high pressure sprayer with hot and cold water. I wonder if it can be converted to a shower. The connection to the faucet is a quick connect type probably 5/8” diameter

• 
  @user-qz1xc2pt2wАй бұрын

  Beautiful place I was there after you took the video probably a few hours,I recognized many of those campers there,make me feel very happy to found this video.thank you very much

• 
  @TheFurrminator18 күн бұрын

  I’m glad you liked the video, we love this place and look forward to returning the first week in July.

• 
  @ericmann7945Ай бұрын

  Very helpful..Thank you sir

• 
  @paulmorrow-fx8kdАй бұрын

  any tips for laying out and carving the stars on the curved sections of a wavy flag. thanks, paul @ calabash

• 
  @nurembergcode6148Ай бұрын

  Very good job and nicely presented DIY vid as well. We are going to do this for a kitchen floor for our cabin in the mountains.

• 
  @AnimeabeАй бұрын

  I love this so much. Just the point when you are just sanding it for the first time it looks so cool, like wood bricks.

• 
  @vitaminmc60862 ай бұрын

  Thank you for sharing this!

• 
  @Beaverdam832 ай бұрын

  nice construction. i need every square inch of spare in that compartment and this halved it. i really like the slide operation though. maybe i can utilize it elsewhere

• 
  @mikekelly96242 ай бұрын

  Thank you so much for this video. I ordered the exact same kit and followed your instructions (minus dropping my phone in the lid).

• 
  @FishOnSalMan2 ай бұрын

  Thankyou, and like you said it happens most times when the truck has been in the shop, same thing happens to me.

• 
  @goldwing20002 ай бұрын

  Probably should have cleaned the loose dirt off the top of the tank before putting the riser adapter down. That butyl isn't sealing anything now.

• 
  @1GSN12 ай бұрын

  I’m sold, how much for you to make one for my Taurus lol

• 
  @amusementvillage2 ай бұрын

  What kind of color pigment did you use

• 
  @Shumaxer7142 ай бұрын

  Hey, thank you so much for your videos. I now have the same set up. Just a quick question on how you connect the generator to the RV propane. I also have the same RV. 😎

• 
  @Shumaxer7142 ай бұрын

  Do you connect it to the RV quick connect or straight to the propane tank. Thanks.

• 
  @sfldr2 ай бұрын

  My cross bars are 28" apart on center. Would this carrier adjust to fit? There's one for sale here but it's quite a drive.

• 
  @user-ol1me5uh8e2 ай бұрын

  Is that storage space accessible from the inside of the rv bedroom? If so how can I secure it?

• 
  @TheFurrminatorАй бұрын

  Yes, I can raise the bed and access the back side of the storage space. I attached my drawer frame to the back side of the partition that separates two inside drawers under the foot of the bed from the storage space. If that makes sense

• 
  @Knuckledragnation2 ай бұрын

  What I want to know is how the heck did you get that 100lb generator up on to that tray? I just finished, well almost, installing this generator stand minus one busted lip and scratched tooth later (don’t ask) and I’m now looking for ways to get my generator up on to the tray!!!!!!!!✌🏽

• 
  @behzadhedayatizadeh72942 ай бұрын

  ugliest livingroom i ever saw

• 
  @MrTwinkieeater2 ай бұрын

  😂

• 
  @trevormandy20742 ай бұрын

  Great job, looks nice! One question for you. In my use case, maximum drawer height is a concern because I'll be holding a cooler on my sliding drawer. I noticed that your cross beams were vertical. Is there any effect on load bearing by rotating the beams on my frame horizontally (where possible) to save some vertical space?

• 
  @TheFurrminatorАй бұрын

  I don’t think there would be an issue with load bearing, if I understand the question correctly.

• 
  @rondavault74432 ай бұрын

  You did a nice succinct job with the video and a great project.

• 
  @Sussy-hotdog2 ай бұрын

  I’m picking this exact one up today for 75 bucks off FB marketplace. Looks brand new never used…. But model must be 20 years old or more.

• 
  @LostBoysRecovery3 ай бұрын

  Do you have a video or link to those quick disconnects for the propane, plastic covers or a video showing how you did that

• 
  @animalmother99453 ай бұрын

  Why not measure a real flag and do math to make smaller or larger. Duh

• 
  @davidschumann44953 ай бұрын

  Thank you very much. Great explanation.

• 
  @sherwinserran20083 ай бұрын

  Wow impressive mind. You just proven necessity is the mother of invention. Thanks for sharing this idea.

• 
  @theoldgoat45253 ай бұрын

  Very useful review. Would it be possible to provide the internal length and width? I am planning to add a cargo carrier and cargo box to my class B RV for an Alaska trip this summer and want to know the largest cargo box that will fit within the rails. UPDATE: I downloaded the manual from the harbor freight website and it does give the interior dimensions which are 47 5/16” long by 20” wide and 6” high.

• 
  @noahriding57803 ай бұрын

  You are really good at building. I like what you did. Looks sturdy and made well. Thanks for letting us learn from this.

• 
  @joeg91123 ай бұрын

  I use harbor freight beatings on a plywood base for the drawer to ride on. Slides like a dream with nom chance of warping or expanding.

• 
  @angelobauer32283 ай бұрын

  Promo*SM 😄

• 
  @davidjaypeterson6443 ай бұрын

  Thank you