Here at Dakemp KZread channel we thrive to bring our subscribers original Nissan S chassis, D chassis and all around automotive content! If you enjoy custom turbo setups, dangerously high mileage turbo turds you have come to the right channel.
Your in Albuquerque that cool. I’m from here also. Like your videos. I need to find left side turbo manifold?
@maxibro178624 күн бұрын
just got myself a 2000 frontier with the same motor hope to see more videos on this! love your content!
@SH-ei3ql27 күн бұрын
I'd love to see more z31 content I love that thing
@dank5015Ай бұрын
I wish you had a million subscribers, appreciate you!
@blqnk6270Ай бұрын
Dude you have ALL the problems my 1986 300zx has LOL! I just got the exterior done but my power steering and interior are yuck! Perfect video man, thank you and I'll do a DIY job due to your video!!
@matthewschota6907Ай бұрын
Do you know if 240sx ka rods and pistons will fit in ka24e hardbody motor?
@karmafarbus160Ай бұрын
tubing shortage in Nevada right now , Biden's America
@jasonoverton65372 ай бұрын
I'm doing the same build on a 93 coupe cool to see your doing the same thing
@garystrange11312 ай бұрын
Do you have any d21 parts?
@lil-man2 ай бұрын
Hey!! I made the same kind of bed for mine!!! Totally cool
@josemauriciomorales76872 ай бұрын
Did you have to get diferent engine
@ggsgarage70543 ай бұрын
What kind of clutch was yu using
@Kiwismakemytongueitch3 ай бұрын
I have an 85 that was basically gutted besides the carpet and back seat but idk where any of the harware goes to all the interior parts it’s just in ziplock bags
@jameschilders93533 ай бұрын
subbed to this channel now glad I found it keep going dude!
@UNEXPLAINABLE_NIGHTRIDER3 ай бұрын
Damn u still rocking the old distributor
@Clayton-markisich3 ай бұрын
Where are you located?? I have one that I bought from a buddy but there’s a few things wrong with it
@AngelWingrc3 ай бұрын
Do you need wheel spacers?
@gabel42773 ай бұрын
This makes me think very hard on getting a z31
@Dakemp2403 ай бұрын
Everyone should experience the difficulties of the z 😅
@PDofLA4 ай бұрын
Awesome! Now that you have a forklift, I can send you my spare KA to turbo for me. 😂
@Dakemp2403 ай бұрын
😅 if only the damn thing would move
@nikibobby4 ай бұрын
First to the comments.
@AndrewBaker-xt3dv4 ай бұрын
Hell yeah love it brother. Got a 96 Hardbody myself
@Viking88884 ай бұрын
Not an LS dude. Go RB26! Although the LS is probably cheaper and you can get parts at the corner store! 😉🤪
@Allussion4 ай бұрын
I love my z31 and my frontier haha
@ka.powered83284 ай бұрын
If it doesn't cost too much I think u should rebuild it... And then run it till it dies
@twotone200488644 ай бұрын
You have something else going on if your fuel economy is that low. I have 6 of them and I have never gotten below high teens. I average in the upper 20s. Also, a VG is a difficult engine to blow up. Unless you intentionally do something to kill it, it probably won't die.
@Dakemp2404 ай бұрын
I'm sure the O2 sensor isn't doing the right things anymore, and I keep the rpms rather high. Also I agree.. it will never die
@lucionsrandom51954 ай бұрын
If that fuse blows again, check for continuity to ground on pin 36 of the ECU. (While still plugged in, backprobe it.) The 02 wiring made me think of how these cars use common grounds for a lot of things, and the MAF happens to share that common ground.... And you removed the air filter and it ran fine... Not to mention, these are self cleaning MAF's, which is probably what kills 90% of Z31 batteries that don't drive often.
@Defensedefumer1384 ай бұрын
A bad maf had me chasing problems for like a month. I swapped it out got it running great, then LS swapped it. I liked the VG but that LS has so much bottom end torque. I don't regret it.
@Dakemp2404 ай бұрын
I think I'm leaning towards an LS too.
@julesvideoarchive4 ай бұрын
Been missing the Z content I just bought a 1985 300ZX Turbo and was watching the 300zx vids here before I bought it now I'm glad they're back!!!
@darkmoonblade13294 ай бұрын
I'm happy to see a z31 video. My shitass wants to see a vq35de put in it 😅. Can't really go wrong with an ls motor tho. Hope to see more Z content in the future!
@lukeschofill91584 ай бұрын
Love the z content
@robsan91564 ай бұрын
Please don't LS it! Rebuild the VG 👍
@Dakemp2404 ай бұрын
A difficult situation fs
@alexistecca4084 ай бұрын
So glad she’s back man you inspired me to fix up my 300zx glad your still updating us on it
@trevorhume25544 ай бұрын
the stock ECU cannot hand the amps the aftermarket fuel pump draws and will short the ECU. You need to do a Fuel Pump Relay Mod on these cars to not short the ECU.
@Dakemp2404 ай бұрын
I say let it burn😂
@lawrencehayden7534 ай бұрын
Drop the tank yes
@Grainsauce4 ай бұрын
Just curious why was CVT used for power steering fluid, is it better than ATF?
@Dakemp2404 ай бұрын
Only thing I had haha
@Grainsauce4 ай бұрын
What are your plans for the head, were you using a MLS headgasket before also?
@Dakemp2404 ай бұрын
No, they were both OEM gaskets. We are checking the block for cracks this week.
@ka.powered83284 ай бұрын
Man I love your little shop!
@Sputnik3604 ай бұрын
Loving the turbo single jingle content.👍
@alexistecca4084 ай бұрын
Miss the 1986 Nissan 300zx 😢
@Dakemp2404 ай бұрын
She's coming back next week! She's not happy...
@alexistecca4084 ай бұрын
I got one for $500 from my brothers friend and I was trying to do the same as you bro put in a turbo and fix maybe the seats hopefully she comes back another time for a video 👍🏽🔥
@nezzyboiiproduction55295 ай бұрын
First like first comment
@iiXtcy5 ай бұрын
Do the 350z wheels bolt straight on ?
@Dakemp2404 ай бұрын
Yes, they need 1.5" spacers to fit right
@darkmoonblade13295 ай бұрын
Always come back to this playlist and re watch these videos. I have an opportunity to buy a 1986 slicktop manual z31 for $600, i want to, but it's intimidating for a first project car 😅.
@danielthecaraddict63895 ай бұрын
Bring the Z back!
@Dakemp2404 ай бұрын
She's back on Monday! 3/18/2024
@ka.powered83285 ай бұрын
What kind of impact gun were u using(the yellow one) and how long have u had it? And did u ever have to replace any batteries on it?
@Dakemp2404 ай бұрын
I think you're talking about the 20v brushless Dewalt impact. She goes all day with one battery
@ka.powered83285 ай бұрын
Man I was missing a video from u...
@PDofLA5 ай бұрын
😄👍 Same!
@cesarcorujo-ce9vu5 ай бұрын
New sub 😎🔥💯 buying my z31 next Thursday taking a look at it today after work 👍🔥🥰 red
@gabel42775 ай бұрын
👍👍👍
@julesvideoarchive5 ай бұрын
This dude has fuckin discipline yo. "new problem. lets fix it :)" nice mindset fr
Пікірлер
It’s coming along looking great
Your in Albuquerque that cool. I’m from here also. Like your videos. I need to find left side turbo manifold?
just got myself a 2000 frontier with the same motor hope to see more videos on this! love your content!
I'd love to see more z31 content I love that thing
I wish you had a million subscribers, appreciate you!
Dude you have ALL the problems my 1986 300zx has LOL! I just got the exterior done but my power steering and interior are yuck! Perfect video man, thank you and I'll do a DIY job due to your video!!
Do you know if 240sx ka rods and pistons will fit in ka24e hardbody motor?
tubing shortage in Nevada right now , Biden's America
I'm doing the same build on a 93 coupe cool to see your doing the same thing
Do you have any d21 parts?
Hey!! I made the same kind of bed for mine!!! Totally cool
Did you have to get diferent engine
What kind of clutch was yu using
I have an 85 that was basically gutted besides the carpet and back seat but idk where any of the harware goes to all the interior parts it’s just in ziplock bags
subbed to this channel now glad I found it keep going dude!
Damn u still rocking the old distributor
Where are you located?? I have one that I bought from a buddy but there’s a few things wrong with it
Do you need wheel spacers?
This makes me think very hard on getting a z31
Everyone should experience the difficulties of the z 😅
Awesome! Now that you have a forklift, I can send you my spare KA to turbo for me. 😂
😅 if only the damn thing would move
First to the comments.
Hell yeah love it brother. Got a 96 Hardbody myself
Not an LS dude. Go RB26! Although the LS is probably cheaper and you can get parts at the corner store! 😉🤪
I love my z31 and my frontier haha
If it doesn't cost too much I think u should rebuild it... And then run it till it dies
You have something else going on if your fuel economy is that low. I have 6 of them and I have never gotten below high teens. I average in the upper 20s. Also, a VG is a difficult engine to blow up. Unless you intentionally do something to kill it, it probably won't die.
I'm sure the O2 sensor isn't doing the right things anymore, and I keep the rpms rather high. Also I agree.. it will never die
If that fuse blows again, check for continuity to ground on pin 36 of the ECU. (While still plugged in, backprobe it.) The 02 wiring made me think of how these cars use common grounds for a lot of things, and the MAF happens to share that common ground.... And you removed the air filter and it ran fine... Not to mention, these are self cleaning MAF's, which is probably what kills 90% of Z31 batteries that don't drive often.
A bad maf had me chasing problems for like a month. I swapped it out got it running great, then LS swapped it. I liked the VG but that LS has so much bottom end torque. I don't regret it.
I think I'm leaning towards an LS too.
Been missing the Z content I just bought a 1985 300ZX Turbo and was watching the 300zx vids here before I bought it now I'm glad they're back!!!
I'm happy to see a z31 video. My shitass wants to see a vq35de put in it 😅. Can't really go wrong with an ls motor tho. Hope to see more Z content in the future!
Love the z content
Please don't LS it! Rebuild the VG 👍
A difficult situation fs
So glad she’s back man you inspired me to fix up my 300zx glad your still updating us on it
the stock ECU cannot hand the amps the aftermarket fuel pump draws and will short the ECU. You need to do a Fuel Pump Relay Mod on these cars to not short the ECU.
I say let it burn😂
Drop the tank yes
Just curious why was CVT used for power steering fluid, is it better than ATF?
Only thing I had haha
What are your plans for the head, were you using a MLS headgasket before also?
No, they were both OEM gaskets. We are checking the block for cracks this week.
Man I love your little shop!
Loving the turbo single jingle content.👍
Miss the 1986 Nissan 300zx 😢
She's coming back next week! She's not happy...
I got one for $500 from my brothers friend and I was trying to do the same as you bro put in a turbo and fix maybe the seats hopefully she comes back another time for a video 👍🏽🔥
First like first comment
Do the 350z wheels bolt straight on ?
Yes, they need 1.5" spacers to fit right
Always come back to this playlist and re watch these videos. I have an opportunity to buy a 1986 slicktop manual z31 for $600, i want to, but it's intimidating for a first project car 😅.
Bring the Z back!
She's back on Monday! 3/18/2024
What kind of impact gun were u using(the yellow one) and how long have u had it? And did u ever have to replace any batteries on it?
I think you're talking about the 20v brushless Dewalt impact. She goes all day with one battery
Man I was missing a video from u...
😄👍 Same!
New sub 😎🔥💯 buying my z31 next Thursday taking a look at it today after work 👍🔥🥰 red
👍👍👍
This dude has fuckin discipline yo. "new problem. lets fix it :)" nice mindset fr
Awesome video bro