Here we share information with our customers, or future customers, as well as info with other repair personnel in the Cell Phone Repair industry. We are in Cape Coral Florida, and welcome mail in repairs.
Are you still using the machine? Is it reliable? Which molds can we use? Is this able to be repaired? Is this better than nasan's tools? The na-b5 max looks good but nasan's laminators do not have temperature settings.
@CapeCoralCellPhoneRepair14 күн бұрын
I am still using it. I use the molds that press down, and have one for every model....... s.click.aliexpress.com/e/_mNsPFrq TBK has a discount on the machine too!---->s.click.aliexpress.com/e/_DCySxRx
@GregNJP19 күн бұрын
Thank you so much for uploading these videos. Unfortunately most machines don't have videos like that. May I ask some questions? Are you still happy with the machine? I'm planning on ordering it as well, mainly because it uses the external pump and compressor. The other devices have built in tools which seem, logically not as powerful and more likely to break. Which molds can we use? There's so many rubber mats and lamination mats and I'm a bit confused. The older ones just used the huge molds. I would really appreciate your help. HH brother
@CapeCoralCellPhoneRepair14 күн бұрын
Use these molds when laminating. You will see it in the video. Get one for each model you refurbish. Here is the link to seller...... s.click.aliexpress.com/e/_mNsPFrq On the bubble remover on the bottom, just use the foam pad that comes with the TBK machine. This seller has the TBK machine at a discounted price..... s.click.aliexpress.com/e/_DCySxRx You are better off having a dedicated vacuum pump and compressor outside of the machine. Much success!
@KamoheloDlamini2008Ай бұрын
My motherboard is broken, and I'm worried if my phone memory is at risk
@CapeCoralCellPhoneRepair14 күн бұрын
You may need microsoldering board level repairs.
@unclefester4822Ай бұрын
Good video....where can I get those gloves?
@CapeCoralCellPhoneRepairАй бұрын
They have different colors. The gorilla grips are actually better..... amzn.to/4bGEuZL
@florzarate2052 ай бұрын
HOW DO L PUT MORE PRESSURE ON THE MACHINE? I WHAT TO TRY TO REMOVE SOME BLACK SPOTS THAT THE DIPLAY HAS?
@CapeCoralCellPhoneRepair2 ай бұрын
Settings and adjust it there.
@maestropiano64302 ай бұрын
What's better? TBK 208c or NASAN Supa lite?
@CapeCoralCellPhoneRepair2 ай бұрын
TBK better for flat screens and does up to 13" ipad
@coffeeabuse2 ай бұрын
My Pixel 8 using this charger charges at 22 watts between 30 and 70 percent charged, and then it drops off gradually as it charges between 70 and 90 percent to eventually 4 watts. This measurement was taken using the AccuBattery app.
@CapeCoralCellPhoneRepair2 ай бұрын
It will charge at full wattage when the battery is very low. After a certain percentage, the rate of charging goes down.
@poki49022 ай бұрын
sorry to bother you. i want to ask for a solution i2c 6s wifi not being read..
@CapeCoralCellPhoneRepair2 ай бұрын
I dont have that one sorry.
@poki49022 ай бұрын
ok thanks
@RohitKumar-mm4xi2 ай бұрын
Rs
@CapeCoralCellPhoneRepair2 ай бұрын
???
@GNMSrep3 ай бұрын
Thank you for being so clear and helpful. This video is all I needed 🔥🔥🫡
@CapeCoralCellPhoneRepair3 ай бұрын
You're so welcome!
@Yashdahiya00113 ай бұрын
Can I charge my pixel 6a with this charge
@CapeCoralCellPhoneRepair3 ай бұрын
YES!
@HavanaWoody3 ай бұрын
Man, after believing the one I had never worked right, and I was too apathetic to return it. While tidying up my garage today, I just happened to pull off the sticker that warned to connect the battery ( I had) and realized that there were another set of outlets on that side which were the ones with back up power, and I had only ever used the side that was surge protection. I had this damn thing for 10 yrs and only disconnected it a few years back when I narrowed down the high frequency noise I kept hearing. I can't believe I was such an Idiot. Now I guess I will go ahead and replace the battery and hook it up on my modem and router and hope that the leaking capacitor noise has gone away.
@CapeCoralCellPhoneRepair3 ай бұрын
Hope it gets up and running!
@lereparateur57394 ай бұрын
Thank you for the unboxing , With supa lite , Can we press lcd on frame ?
@CapeCoralCellPhoneRepair3 ай бұрын
Out of frame
@merisceric4 ай бұрын
Thank you for the video. I was thinking about ordering one. Would you recommend it?
@CapeCoralCellPhoneRepair4 ай бұрын
Yes, definitely
@robertmugabe76474 ай бұрын
I have one which can't produce pleasure
@Leopold01244 ай бұрын
Thank you dude 🙏
@CapeCoralCellPhoneRepair4 ай бұрын
No problem 👍
@peac664 ай бұрын
It's too dangerous
@CapeCoralCellPhoneRepair4 ай бұрын
What is too dangerous?
@user-xx7dg6ow4z4 ай бұрын
Hello, we have been using the blue laser machine from Forward for 3 years. I would like to ask you for help. We currently have a problem with the laser head. Does not cut white back glass. Works well with all other colors. Have you experienced this problem? Do you know where I can buy a head for this laser? From what I saw, the power of the laser head is 25W. Unfortunately, I can't find such a head anywhere. If you know anything about this I would be very grateful for your help.
@CapeCoralCellPhoneRepair4 ай бұрын
I would start at the official store s.click.aliexpress.com/e/_m05V6Rk
@user-xx7dg6ow4z4 ай бұрын
I wrote to forward on their oficial website and they dont answer. Thats the reason why I am searching for the solution.@@CapeCoralCellPhoneRepair
@vladimirrodrigues6394 ай бұрын
ajudou muito 👏
@CapeCoralCellPhoneRepair4 ай бұрын
estou feliz que tenha ajudado você
@user-je4du7hl5t4 ай бұрын
Thx bro
@CapeCoralCellPhoneRepair4 ай бұрын
You got it!
@ferenclucas72805 ай бұрын
thanks for the very helpful video! If the new battery arrives dead is it going to keep beeping until the unit recharges it? also, how long is that new battery going to last you now with regular use? thanks !
@CapeCoralCellPhoneRepair5 ай бұрын
New battery should last 3-4 years
@Inforkoisas5 ай бұрын
Brother , it s ok for Apple Watch glass refurbish? Ty
@CapeCoralCellPhoneRepair5 ай бұрын
Yes.
@ArcheeKK5 ай бұрын
Hello, i have a question. I bought Tbk 208m. Can you give me some advice how to set the settings Please? 😉How many MPa for android flat screen, how many mpa (lamination pressure) for iPhone 11 with frame? 🙂 I got this Machine with 0,62mpa but i dont know it is enough and good?
@CapeCoralCellPhoneRepair5 ай бұрын
Personally, just use the parameters on the video. I just don't think it's suitable for curved screen though.
@valinoor50145 ай бұрын
I have Sam machine but the bubble removed not working cans you help me?
@CapeCoralCellPhoneRepair5 ай бұрын
Does it start working, or not working at all?
@Sellgiftcard2 ай бұрын
Hii
@Ricky-hs3nb5 ай бұрын
Im getting the Nasan Supa lite max 15 inch, it requires 2L Vacuum pump, all i find is different numbers of CFMs, what CFM number will equal to 2L vacuum pump?
@CapeCoralCellPhoneRepair5 ай бұрын
amzn.to/3w1CmMd should be enough for the 15 inch Supa Lite Max
@Ricky-hs3nb5 ай бұрын
@@CapeCoralCellPhoneRepair i mean a 2L vacuum pump not a compressor for the 15 inch laminator, what CFM vacuum pump equals a 2L vacuum pump?
@CapeCoralCellPhoneRepair5 ай бұрын
Sorry, I was confused. Thought you meant the compressor. Well, the pump I use in the video is this one and it is plenty enough for the Supa Lite Max amzn.to/42ruoIB it's 5CFM
@shadowwalkerpiczon44145 ай бұрын
It can be use in 18650 battery? What is the size of nickel you use?
@CapeCoralCellPhoneRepair5 ай бұрын
I just use the one that came in the box.
@shadowwalkerpiczon44145 ай бұрын
@@CapeCoralCellPhoneRepair it can be used in 18650 battery?
@joani27325 ай бұрын
Thankd for this video brother im hoping to get one for my shop this year.
@CapeCoralCellPhoneRepair5 ай бұрын
Any time! The link on the video has a discount.
@rachidmh29306 ай бұрын
thanks to u it did really help
@CapeCoralCellPhoneRepair6 ай бұрын
Glad it helped.
@randooopik50196 ай бұрын
<3
@CapeCoralCellPhoneRepair6 ай бұрын
ok
@monksode57006 ай бұрын
Can I just copy your calibrations?
@CapeCoralCellPhoneRepair6 ай бұрын
Every machine is different.
@peterohos21456 ай бұрын
Mine is not working at all,its not compressing
@CapeCoralCellPhoneRepair6 ай бұрын
Check hoses for leaks and check the end connections. You can open it and check inside.
@peterohos21456 ай бұрын
3:48
@CapeCoralCellPhoneRepair6 ай бұрын
.
@user-go8rm5se2p7 ай бұрын
i tot vp1 pro was too expensive but after hearing what you said. im gonna choose general compresser for airgun or something thx
@CapeCoralCellPhoneRepair7 ай бұрын
Your welcome!
@theforce51917 ай бұрын
Is there one for the 13 and up?
@CapeCoralCellPhoneRepair7 ай бұрын
Yes. kzread.info/dash/bejne/fohrrct_aZWwYMY.html
@luqmanaliluqmanali57997 ай бұрын
I need this
@CapeCoralCellPhoneRepair7 ай бұрын
Where are u located?
@luqmanaliluqmanali57997 ай бұрын
I need this lcd
@CapeCoralCellPhoneRepair7 ай бұрын
Where are u located?
@dEezNutZDoOLiST7 ай бұрын
You didn’t explain e05
@CapeCoralCellPhoneRepair7 ай бұрын
Same solution as E04
@mattwood66204 ай бұрын
@@CapeCoralCellPhoneRepair Didnt work for e05
@MelFletcher-mh2uqАй бұрын
@@mattwood6620 Did you ever find a solution? This didn't work for error 5 for me either.
@131XIII7 ай бұрын
Hi! Can you give a link for this black inductor what its on 1:15? Thanks!
@CapeCoralCellPhoneRepair7 ай бұрын
All the materials, including that part, is clearly on the video description. But here they are below........ Link to laser machine..... s.click.aliexpress.com/e/_99nfIp 3 way metal device..... amzn.to/3w6VQcx Dryer duct..... amzn.to/3A0aCoK Extra clamps....... amzn.to/3wYu2bI Start ring collar..... amzn.to/3xWJdlG Reducing collar..... amzn.to/2Vj1Dz3 Trap door dampers..... amzn.to/3jjNAmP 205 CFM super quiet fan used..... amzn.to/3y2YkKI sheet metal self tapping screws.... amzn.to/3k06UGk silicone adhesive....... amzn.to/3qV89YK Window kit if you want to exhaust out the window……… amzn.to/3BtbLpE Carbon filter assembly if you do not have a means to exhaust to the outside…. amzn.to/2YBG1zP
@johngargurevich7 ай бұрын
Hi...The nickel lamine can be used more than 0.15 mm of thickness?and can be used for welding 18650 batteries?
@CapeCoralCellPhoneRepair7 ай бұрын
I just use it for batteries.
@golivamsi55527 ай бұрын
Does it also work with curved screens?
@CapeCoralCellPhoneRepair7 ай бұрын
Absolutely. But not as well as it does on flat screens. It leaves bubbles at times. I reviewed the other larger TBK machine and that does curved screens like it's nobody's business!-----> kzread.info/dash/bejne/q3mtpcibk6yxopc.html
@svetlinbarzev91108 ай бұрын
Thanks for this review! Honestly can the Supa lite, in combination with the B2+ (using it's built-in compressor), do the job with the same effect as the big and a lot more expensive machines? Can this setup really do the job well, оf course, my question is assuming we have the skills needed
@CapeCoralCellPhoneRepair7 ай бұрын
Yes it will
@user-wy7ly3nv8h8 ай бұрын
How are you going to use it
@CapeCoralCellPhoneRepair7 ай бұрын
Don't understand your question
@babyshoptoys74568 ай бұрын
Hi nice video is it good for 18650 battery welding
@CapeCoralCellPhoneRepair8 ай бұрын
Thanks.
@neutronfarid94538 ай бұрын
What is the sound ?
@CapeCoralCellPhoneRepair8 ай бұрын
The compressor and the pump connected to the machine.
@train49058 ай бұрын
Exellent😊
@CapeCoralCellPhoneRepair8 ай бұрын
Thanks!
@phonedoctorbrady-phoneande88868 ай бұрын
I don't have the hose from compressor to the laminator. is this 1/4 tube hosing? or what exactly do i need to buy?
@CapeCoralCellPhoneRepair8 ай бұрын
EVERYTHING you need to buy is on the video description with many links
@ICBTO098 ай бұрын
Can the i6s run on just cable power? I’ve just got mine and when I plug it in, it doesn’t do anything when I press the power. Thanks!
@CapeCoralCellPhoneRepair8 ай бұрын
Yes I can confirm it works on cable power.
@ICBTO098 ай бұрын
@@CapeCoralCellPhoneRepair Hmm. I wonder if the unit I received from InjuredGadgets is just faulty then. Waiting on a 7 battery to come in to confirm
@ICBTO098 ай бұрын
@@CapeCoralCellPhoneRepair Yes you’re correct, I was not using a usb-c 5V cable. It’s on and working. Thank you!
@farinxfarinx8 ай бұрын
Hi, Can you confirm you don't need to put any protection around the side of the chip for exemple, thermal insulation pad or metal plate to not burn the screen ?
@CapeCoralCellPhoneRepair8 ай бұрын
You can use insulator tape like this..... amzn.to/47gERYe
@jimba65859 ай бұрын
I broke my screen beyond being able to unlock.. I spent a day watching tutorials on DIY screen fixes etc.. but then... I had a little bright light pop up.. "what if i just find a second hand phone and replace the mainboard and possibly sister board..." Would that also save my phone or am i missing something? It would save me a lot of hassle, and like you just mentioned.. less parts to go wrong with, an original screen... etc. Curious what you think :) (found a second hand A51 for quite cheap!) Did this a while back with my old S7, that worked great :) is something similar possible with the A51? Hah, last edit: Will I need a identical version concerning a 5g or 4g phone?
@CapeCoralCellPhoneRepair8 ай бұрын
You would need an identical version yes
@jimba65858 ай бұрын
Thanks for your reply!!
@JustFix_oslo9 ай бұрын
Very nice idea, I think about this like take the brush 🖌️ and paint this black marks. That also good ide thank 🎉
Пікірлер
Are you still using the machine? Is it reliable? Which molds can we use? Is this able to be repaired? Is this better than nasan's tools? The na-b5 max looks good but nasan's laminators do not have temperature settings.
I am still using it. I use the molds that press down, and have one for every model....... s.click.aliexpress.com/e/_mNsPFrq TBK has a discount on the machine too!---->s.click.aliexpress.com/e/_DCySxRx
Thank you so much for uploading these videos. Unfortunately most machines don't have videos like that. May I ask some questions? Are you still happy with the machine? I'm planning on ordering it as well, mainly because it uses the external pump and compressor. The other devices have built in tools which seem, logically not as powerful and more likely to break. Which molds can we use? There's so many rubber mats and lamination mats and I'm a bit confused. The older ones just used the huge molds. I would really appreciate your help. HH brother
Use these molds when laminating. You will see it in the video. Get one for each model you refurbish. Here is the link to seller...... s.click.aliexpress.com/e/_mNsPFrq On the bubble remover on the bottom, just use the foam pad that comes with the TBK machine. This seller has the TBK machine at a discounted price..... s.click.aliexpress.com/e/_DCySxRx You are better off having a dedicated vacuum pump and compressor outside of the machine. Much success!
My motherboard is broken, and I'm worried if my phone memory is at risk
You may need microsoldering board level repairs.
Good video....where can I get those gloves?
They have different colors. The gorilla grips are actually better..... amzn.to/4bGEuZL
HOW DO L PUT MORE PRESSURE ON THE MACHINE? I WHAT TO TRY TO REMOVE SOME BLACK SPOTS THAT THE DIPLAY HAS?
Settings and adjust it there.
What's better? TBK 208c or NASAN Supa lite?
TBK better for flat screens and does up to 13" ipad
My Pixel 8 using this charger charges at 22 watts between 30 and 70 percent charged, and then it drops off gradually as it charges between 70 and 90 percent to eventually 4 watts. This measurement was taken using the AccuBattery app.
It will charge at full wattage when the battery is very low. After a certain percentage, the rate of charging goes down.
sorry to bother you. i want to ask for a solution i2c 6s wifi not being read..
I dont have that one sorry.
ok thanks
Rs
???
Thank you for being so clear and helpful. This video is all I needed 🔥🔥🫡
You're so welcome!
Can I charge my pixel 6a with this charge
YES!
Man, after believing the one I had never worked right, and I was too apathetic to return it. While tidying up my garage today, I just happened to pull off the sticker that warned to connect the battery ( I had) and realized that there were another set of outlets on that side which were the ones with back up power, and I had only ever used the side that was surge protection. I had this damn thing for 10 yrs and only disconnected it a few years back when I narrowed down the high frequency noise I kept hearing. I can't believe I was such an Idiot. Now I guess I will go ahead and replace the battery and hook it up on my modem and router and hope that the leaking capacitor noise has gone away.
Hope it gets up and running!
Thank you for the unboxing , With supa lite , Can we press lcd on frame ?
Out of frame
Thank you for the video. I was thinking about ordering one. Would you recommend it?
Yes, definitely
I have one which can't produce pleasure
Thank you dude 🙏
No problem 👍
It's too dangerous
What is too dangerous?
Hello, we have been using the blue laser machine from Forward for 3 years. I would like to ask you for help. We currently have a problem with the laser head. Does not cut white back glass. Works well with all other colors. Have you experienced this problem? Do you know where I can buy a head for this laser? From what I saw, the power of the laser head is 25W. Unfortunately, I can't find such a head anywhere. If you know anything about this I would be very grateful for your help.
I would start at the official store s.click.aliexpress.com/e/_m05V6Rk
I wrote to forward on their oficial website and they dont answer. Thats the reason why I am searching for the solution.@@CapeCoralCellPhoneRepair
ajudou muito 👏
estou feliz que tenha ajudado você
Thx bro
You got it!
thanks for the very helpful video! If the new battery arrives dead is it going to keep beeping until the unit recharges it? also, how long is that new battery going to last you now with regular use? thanks !
New battery should last 3-4 years
Brother , it s ok for Apple Watch glass refurbish? Ty
Yes.
Hello, i have a question. I bought Tbk 208m. Can you give me some advice how to set the settings Please? 😉How many MPa for android flat screen, how many mpa (lamination pressure) for iPhone 11 with frame? 🙂 I got this Machine with 0,62mpa but i dont know it is enough and good?
Personally, just use the parameters on the video. I just don't think it's suitable for curved screen though.
I have Sam machine but the bubble removed not working cans you help me?
Does it start working, or not working at all?
Hii
Im getting the Nasan Supa lite max 15 inch, it requires 2L Vacuum pump, all i find is different numbers of CFMs, what CFM number will equal to 2L vacuum pump?
amzn.to/3w1CmMd should be enough for the 15 inch Supa Lite Max
@@CapeCoralCellPhoneRepair i mean a 2L vacuum pump not a compressor for the 15 inch laminator, what CFM vacuum pump equals a 2L vacuum pump?
Sorry, I was confused. Thought you meant the compressor. Well, the pump I use in the video is this one and it is plenty enough for the Supa Lite Max amzn.to/42ruoIB it's 5CFM
It can be use in 18650 battery? What is the size of nickel you use?
I just use the one that came in the box.
@@CapeCoralCellPhoneRepair it can be used in 18650 battery?
Thankd for this video brother im hoping to get one for my shop this year.
Any time! The link on the video has a discount.
thanks to u it did really help
Glad it helped.
<3
ok
Can I just copy your calibrations?
Every machine is different.
Mine is not working at all,its not compressing
Check hoses for leaks and check the end connections. You can open it and check inside.
3:48
.
i tot vp1 pro was too expensive but after hearing what you said. im gonna choose general compresser for airgun or something thx
Your welcome!
Is there one for the 13 and up?
Yes. kzread.info/dash/bejne/fohrrct_aZWwYMY.html
I need this
Where are u located?
I need this lcd
Where are u located?
You didn’t explain e05
Same solution as E04
@@CapeCoralCellPhoneRepair Didnt work for e05
@@mattwood6620 Did you ever find a solution? This didn't work for error 5 for me either.
Hi! Can you give a link for this black inductor what its on 1:15? Thanks!
All the materials, including that part, is clearly on the video description. But here they are below........ Link to laser machine..... s.click.aliexpress.com/e/_99nfIp 3 way metal device..... amzn.to/3w6VQcx Dryer duct..... amzn.to/3A0aCoK Extra clamps....... amzn.to/3wYu2bI Start ring collar..... amzn.to/3xWJdlG Reducing collar..... amzn.to/2Vj1Dz3 Trap door dampers..... amzn.to/3jjNAmP 205 CFM super quiet fan used..... amzn.to/3y2YkKI sheet metal self tapping screws.... amzn.to/3k06UGk silicone adhesive....... amzn.to/3qV89YK Window kit if you want to exhaust out the window……… amzn.to/3BtbLpE Carbon filter assembly if you do not have a means to exhaust to the outside…. amzn.to/2YBG1zP
Hi...The nickel lamine can be used more than 0.15 mm of thickness?and can be used for welding 18650 batteries?
I just use it for batteries.
Does it also work with curved screens?
Absolutely. But not as well as it does on flat screens. It leaves bubbles at times. I reviewed the other larger TBK machine and that does curved screens like it's nobody's business!-----> kzread.info/dash/bejne/q3mtpcibk6yxopc.html
Thanks for this review! Honestly can the Supa lite, in combination with the B2+ (using it's built-in compressor), do the job with the same effect as the big and a lot more expensive machines? Can this setup really do the job well, оf course, my question is assuming we have the skills needed
Yes it will
How are you going to use it
Don't understand your question
Hi nice video is it good for 18650 battery welding
Thanks.
What is the sound ?
The compressor and the pump connected to the machine.
Exellent😊
Thanks!
I don't have the hose from compressor to the laminator. is this 1/4 tube hosing? or what exactly do i need to buy?
EVERYTHING you need to buy is on the video description with many links
Can the i6s run on just cable power? I’ve just got mine and when I plug it in, it doesn’t do anything when I press the power. Thanks!
Yes I can confirm it works on cable power.
@@CapeCoralCellPhoneRepair Hmm. I wonder if the unit I received from InjuredGadgets is just faulty then. Waiting on a 7 battery to come in to confirm
@@CapeCoralCellPhoneRepair Yes you’re correct, I was not using a usb-c 5V cable. It’s on and working. Thank you!
Hi, Can you confirm you don't need to put any protection around the side of the chip for exemple, thermal insulation pad or metal plate to not burn the screen ?
You can use insulator tape like this..... amzn.to/47gERYe
I broke my screen beyond being able to unlock.. I spent a day watching tutorials on DIY screen fixes etc.. but then... I had a little bright light pop up.. "what if i just find a second hand phone and replace the mainboard and possibly sister board..." Would that also save my phone or am i missing something? It would save me a lot of hassle, and like you just mentioned.. less parts to go wrong with, an original screen... etc. Curious what you think :) (found a second hand A51 for quite cheap!) Did this a while back with my old S7, that worked great :) is something similar possible with the A51? Hah, last edit: Will I need a identical version concerning a 5g or 4g phone?
You would need an identical version yes
Thanks for your reply!!
Very nice idea, I think about this like take the brush 🖌️ and paint this black marks. That also good ide thank 🎉
Your welcome.