Пікірлер

• 
  @MangaMan10810 сағат бұрын

  I definitely like the idea of having yhe pilot laying down, but i definitely want to use this for my Mandalorian army. With how hollow this is and the idea of cutting out for its own access panels it would be a great Snub fighter and i could work in details like the old rebel Snowspeeder.

• 
  @benjaminkitaura49812 сағат бұрын

  You have to make the cobra version too! The SHARC vs The Wave Crusher……

• 
  @NEWYORKNIGHT1974Күн бұрын

  I wanted this for a custom Sharc too. So bad in fact that whenni couldn't find it stateside I tried to get it from Ireland. They apparently don't ship to the US.

• 
  @VforVendetta13Күн бұрын

  Honestly, if you are destroying this ship you are a moron. This is an ultra rare item that was only released in the UK for a super limited time. It was scheduled to release in the united states and NEVER DID! These are impossible to find on the UK Ebay website as no one sells them. The only reason these are showing up now is because they were in a united states close out shop and collectors are paying high prices for these because you could never get them. This was a dumb idea to break.

• 
  @PaulGallianoChannelКүн бұрын

  Moving right along! Looking forward to the next vid

• 
  @checkpointbravo-y7f2 күн бұрын

  Nice work sir

• 
  @gunbunnycustoms4302Күн бұрын

  @@checkpointbravo-y7f thank you!

• 
  @r.davidhill76392 күн бұрын

  This is why you're so awesome. Thanks for the showing and explaining.

• 
  @gunbunnycustoms43022 күн бұрын

  Thank yiu! I appreciate that!

• 
  @joerodriguez85192 күн бұрын

  This will be so good when you finish!!!

• 
  @joerodriguez85192 күн бұрын

  Without customization, this is still a very cool vehicle!! I would love to find one myself!! Great videos always!!

• 
  @gunbunnycustoms43022 күн бұрын

  It is! And I may do one just as a repaint without any modifications. Thank you!

• 
  @markd98032 күн бұрын

  First time I saw that Buzz Lightyear vehicle online, I thought it reminded me of the SHARC. I look foreward to seeing the final product.

• 
  @cptoyscollection2 күн бұрын

  👍🏼#21.🤝🏼😁 Brother, that brand of acrylic cutter you use. I bought one from Home Depot and it's trash.

• 
  @gunbunnycustoms43022 күн бұрын

  I found this one on Amazon… and it’s been pretty good for the last few projects…I’m sorry you had bad results with yours…I’ll get a different one and see if the results are better and put it in a video for you bud

• 
  @tgraz559Күн бұрын

  Great cutter. You only use that one? I'm too afraid to slice into one..

• 
  @LuciferSM3512 күн бұрын

  Sweet

• 
  @paisano7772 күн бұрын

  Great work as always

• 
  @gunbunnycustoms43022 күн бұрын

  Thank you bud!

• 
  @JimboFettsToyTomb2 күн бұрын

  Cannot wait to see the end product!👍👍👍

• 
  @tonys_figs2 күн бұрын

  Beautiful work as always!!

• 
  @sirt3abaggins2 күн бұрын

  Yeah seeing all this really makes me wanna turn em into like a SWARM flyer to go along with the eventual minihelis from Valaverse

• 
  @gunbunnycustoms43022 күн бұрын

  That would be awesome!

• 
  @nicholasdickens28012 күн бұрын

  Such a beautiful design. That would look great with gold and silver for the Viper Patrol.

• 
  @PaulGallianoChannel3 күн бұрын

  Those panels worked out perfectly 💥

• 
  @gunbunnycustoms43022 күн бұрын

  They sure did bud!

• 
  @cptoyscollection3 күн бұрын

  😮😮😮👍🏼👍🏼👍🏼👍🏼👏🏼👏🏼👏🏼👏🏼👏🏼🔥🔥🔥🔥I can't wait to see the end result. That's gonna be epic!...👍🏼👍🏼👍🏼🤝🏼😁

• 
  @gunbunnycustoms43022 күн бұрын

  Thanks bud!

• 
  @J.D.Vision3 күн бұрын

  Wish I could find this ship anywhere. 😪

• 
  @gunbunnycustoms43022 күн бұрын

  Yeah man I just happen to stumble across them that day. Never thought I’d actually stateside

• 
  @junkioncraftsandbuilds3 күн бұрын

  Man, I'm excited to see part three, especially when you create the lift mechanism for the weapon systems

• 
  @doro6263 күн бұрын

  Someone posted on Reddit you were working on this. cant wait to see the final product.

• 
  @gabe_satx3 күн бұрын

  I managed to remove the seat also. That bottom tab first then I forced the seated area up and it cracked off pretty easy. The back area was a problem for me. Since it’s hollow, I took a drill to It and made holes in the lining of the seat to weaken the plastic thinking I could remove pieces at a time. As I was using force the whole thing just pulled up from the two tabs behind the seat and came out all as one piece.

• 
  @gunbunnycustoms43023 күн бұрын

  It’s definitely a task! I was able to remove the seat and remove the inner wall it’s attached to. Part 2 should be up today and I show how it looks with that done. Thank you for watching!

• 
  @sirt3abaggins3 күн бұрын

  I'd really hope this comes to the US I'd love to get 2 of these for kitbashing

• 
  @gunbunnycustoms43023 күн бұрын

  I found these at Ollie’s. If I can find them anywhere else I’ll post it on here bud

• 
  @sirt3abaggins2 күн бұрын

  @@gunbunnycustoms4302 You rock man! Ik probably a no but if you happen to see 2 at Ollie's again I'll happily PayPal you for em too including shipping

• 
  @antonshagswell3 күн бұрын

  Super excited what you cook up with this!

• 
  @user-hf6fy8yp1n3 күн бұрын

  it would be cool if the panels open from the top then they would look like fins

• 
  @bobbywold23113 күн бұрын

  Have you ever seen the Aliens evac toy vehicle to me looks similar to the Cobra Sea Ray

• 
  @gunbunnycustoms43023 күн бұрын

  I haven’t! I’ll have to check it out!

• 
  @cyberfrank-bx2nv3 күн бұрын

  have you finished this project bro? I check at your video library, and can t find much titled ; X project done! ....? either you never finish your pieces... or you don t do videos when they re done... it s confusing man. I mention this because, otherwise I think you d be more pop if we could clearly access your finished pieces. it s rather dull to listen to your verbal plans, I want to see the results. you could do much better structuring your videos differently, because... you really do super designs, and are ambitious. please, just point me to the final videos where the stuff is actually done, it s not clear. so now you know... God bless America and world peace! good work bro

• 
  @cyberfrank-bx2nv3 күн бұрын

  good project bro I won t check the whole video listening to ; I will do this, I will do that... but I ll check your other finished projects, you have talent and are creative man! so now you know... God bless America and world peace! good show bro

• 
  @gunbunnycustoms43023 күн бұрын

  Thank you!

• 
  @LuciferSM3513 күн бұрын

  Paw patrol vehicles have clips to hold the pups in place . That's a thought.

• 
  @gunbunnycustoms43023 күн бұрын

  Good idea!

• 
  @LuciferSM3513 күн бұрын

  @@gunbunnycustoms4302 the vehicle always end up in thrift stores so save money there

• 
  @theprofitdirector39463 күн бұрын

  I can't wait to see how this comes out. Gun Bunny always does great work and inspires me to do better on my customs. Thank you GBC.

• 
  @gunbunnycustoms43023 күн бұрын

  Thank you! I appreciate that!

• 
  @J.D.Vision3 күн бұрын

  Where did you find it?

• 
  @gunbunnycustoms43023 күн бұрын

  Ollies bud

• 
  @PaulGallianoChannel3 күн бұрын

  Very cool, man. Looking forward to the next update.

• 
  @gunbunnycustoms43023 күн бұрын

  Thanks!

• 
  @junkioncraftsandbuilds3 күн бұрын

  what a great Idea! I'll definitely follow along on this journey. I may 3D print some parts. I like the idea of the guns and the divers as well!

• 
  @gunbunnycustoms43023 күн бұрын

  @@junkioncraftsandbuilds thank you! It’s a fun project so far! Part 2 should be up in the next day or two!

• 
  @PaulGallianoChannel3 күн бұрын

  Great work as always, dude! 👏👏👏

• 
  @gunbunnycustoms43023 күн бұрын

  @@PaulGallianoChannel thanks Paul! I appreciate the support!

• 
  @floydforthought99983 күн бұрын

  I Picked one of these up. Couldn’t figure out a good way to take it apart without possibly cracking the plastic. Any ideas? No screw holes anywhere on this thing

• 
  @gunbunnycustoms43023 күн бұрын

  @@floydforthought9998 yeah bud Mattel stuff is hard to crack! They use either super glue or sonic welding to keep them together. But I do have some ideas for alternative approaches! So stay tuned for part 2 which should be up soon!! And thank you for watching!

• 
  @dolphins13a3 күн бұрын

  My man , this is outstanding bravo . Saludos from Costa Rica

• 
  @gunbunnycustoms43023 күн бұрын

  @@dolphins13a thank you my friend!

• 
  @StanleysToyRoom3 күн бұрын

  that looks amazing! i love seeing more REDs in cobra color schemes! great job!

• 
  @gunbunnycustoms43023 күн бұрын

  @@StanleysToyRoom thank you bud!

• 
  @armoriya3 күн бұрын

  Hey Gun Bunny, can you post a vid of how you painted and what paint you used for Tomax & Xamot’s suited bodies? Thank you in advance.

• 
  @gunbunnycustoms43023 күн бұрын

  Definitely!

• 
  @bobbywold23114 күн бұрын

  Absolutely amazing!!! you are very talented

• 
  @gunbunnycustoms43023 күн бұрын

  Thank you! I really appreciate your kind words bud!

• 
  @phoenixrisingcreations4 күн бұрын

  Love the way it looks.

• 
  @gunbunnycustoms43023 күн бұрын

  Thank you!

• 
  @JohnnyB54544 күн бұрын

  GEEEEZ! Absolutely awwwesome! Well done 👍🏼

• 
  @gunbunnycustoms43023 күн бұрын

  Thank you!

• 
  @Astro3194 күн бұрын

  Love hearing your thoughts on the approach to this custom, the final result is truly impressive! 😮 👏🏻👏🏻👏🏻

• 
  @gunbunnycustoms43023 күн бұрын

  Thank you! I really appreciate that!

• 
  @mocobb47914 күн бұрын

  Beautiful work!

• 
  @gunbunnycustoms43023 күн бұрын

  Thank you!

• 
  @aawolvea4 күн бұрын

  Absolutely gorgeous! Masterpiece!

• 
  @gunbunnycustoms43023 күн бұрын

  Thank you so much!

• 
  @lanard656414 күн бұрын

  Nice video brotha, thank you for the shot out! Keep them coming as we find new figures. Appreciate you!

• 
  @Astro31915 күн бұрын

  nice review! I saw three of these at my own local Target today as well, but I am good with "heavy artillery" Roadblock and regular Tripwire. Can't wait to see what you do with the twins!

• 
  @gunbunnycustoms430215 күн бұрын

  Thanks! I posted the finished twins on my instagram bud!

• 
  @joerodriguez851915 күн бұрын

  Cool 😎. Thanks for another great video!!

• 
  @gunbunnycustoms430215 күн бұрын

  Thank you! I appreciate that!

• 
  @jtscustomcutlery31716 күн бұрын

  I love watching these types of videos. I just don’t have what it takes to do what you do! Awesome! 👍🏻 and if I had the money and forethought I would have bought like 4 of them lol 😂 (I didn’t get even one lol 😂)

• 
  @jvoidhuey308826 күн бұрын

  Is there a way to remove the wheels if you put them on the wrong way in an excited haste? Asking for a friend... I did it!

• 
  @gunbunnycustoms430226 күн бұрын

  @@jvoidhuey3088 I believe they can be popped back out. I haven’t done it yet, but they seem like they’d be able to just be pulled back out bud.