Amazing! I’m going to dig in to this product more and let my fellow inspectors know more about it. 👍
@Russian_patriot_2000Күн бұрын
Good job everyone.
@loreec902 күн бұрын
Don’t use adhesive and staples.. you can see the flat spots and kinks in the bead due to drywall has same issues. Use taping mud to attach bead, you can adjust bead in or out as needed. Pin where needed until dry. Mesh tape and coat 😎. Don’t hotmud plastic trim it doesn’t bond well
@TD753 күн бұрын
That has to be the absolute worst music ever on youtube.
@ebele34453 күн бұрын
Thanks
@robertoserrano38638 күн бұрын
Que chingona es esta mora ❤
@MrsAmandaTorres9 күн бұрын
Thank you
@oldpcgamers745011 күн бұрын
And now your shower looks like an RV. mud and sand right to the profile crisp and clean with the proper caulk to seal the paint.
@oukastoukast21 күн бұрын
Not glued? Just stapled?
@turnerdrywallrestoration807721 күн бұрын
As a city inspector this is a great product idea and can’t wait to see it used in the field!
@robertsonplantwalls27 күн бұрын
I just got photos from a project using F channel. The mud went over the trim and we don't have really nice clean straight lines like you have. What do you think happened? I'm thinking they didn't use enough adhesive and there is too much give on the trim, and so it went over.
@robertsonplantwalls28 күн бұрын
you explained this 100x better than mat risinger and actually showed it coming together. yet his video has 1m views. youtube algo you hear me? get it together
@stevedavis38129 күн бұрын
You lovely girls are very very good on the trowel and all the other aspects of the trade..you must have grown up with it in the family..I am impressed..I spent 40 years doing the plastering trade domestic work to commercial jobs...and you would go a long way to see a team like you two...greetings from Australia
@JDMbrian88Ай бұрын
I would rather use more glue than have a chance of the bead cracking in the future.
@loreec90Ай бұрын
Tear away is inferior to tape on, with its square corner its easily over sanded leaving a visible line at the mud break. The tear away portion makes it tough to have a consistent reveal(you can’t see the reveal) Use tape on trim and leave a caulk gap, to mask use paper joint tape fold in center use your 6”knife to push into gap. After you coat L trim run knife between bead and paper, when mud is dry pull out paper and you can a perfect gap
@mattsivert2594Ай бұрын
I guess I'll give you my millions more idea . The pad for the Black widow make them for 9-in power sanders
@MMillerPCsАй бұрын
Is that stuff around the arch flex tape or some sort of vinyl?
@user-qg6jo7xi2j2 ай бұрын
❤❤❤❤
@user-qg6jo7xi2j2 ай бұрын
❤❤❤
@user-qg6jo7xi2j2 ай бұрын
Thanks ❤
@user-qg6jo7xi2j2 ай бұрын
Thanks for good information ❤
@user-qg6jo7xi2j2 ай бұрын
❤❤❤❤
@user-qg6jo7xi2j2 ай бұрын
Thanks ❤
@user-qg6jo7xi2j2 ай бұрын
Thanks ❤
@user-qg6jo7xi2j2 ай бұрын
Thanks 😊
@user-qg6jo7xi2j2 ай бұрын
Thanks
@gretchenstuller2 ай бұрын
We got our trim Tex from a local interior supplier here in Anchorage. Had to order from Seattle. But so excited to install it.
@user-qg6jo7xi2j2 ай бұрын
Excellent news n products ❤
@user-qg6jo7xi2j2 ай бұрын
I cant find it on Amazon. Weher we can find it❤
@BrauliomamboFlores2 ай бұрын
Hello great day great work you are doing
@lovemykids9932 ай бұрын
I literally lost count how many contractors been through. Ripped off etc. I think I need these two to finish my house which should take one day. Keep up the good work gals. Wish you were in ky
@GilbertTaping2 ай бұрын
🔥🔥🔥🤭🤭
@josuegallegos84682 ай бұрын
I like your work...
@jacktownvillan2 ай бұрын
Awarded least informative vid ever!
@lestalkmorebasss3 ай бұрын
Where to buy? They don’t sell any Trimtex anywhere near me…… regular corner bead is all they have available here…..
@aborodina83563 ай бұрын
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@edwardmabagos73093 ай бұрын
Where can I buy that item shadow bead
@TheBshackelford13 ай бұрын
are you referring to the corner bead that you need the pink spray adhesive to attach it to the drywall? that stuff sucks. you definitely need seam tape for the edges
@brianwball403 ай бұрын
great explanation!
@travisnapoli14433 ай бұрын
Why don't you try instructions what is wrong with your marketing dept.
@travisnapoli14433 ай бұрын
Wordy words are hard, you can't sue instructions if we don't give any lmao.
@travisnapoli14433 ай бұрын
Didn't even go over basic installation this was a non article, I mean there is branding and also whatever this was...
Пікірлер
Amazing! I’m going to dig in to this product more and let my fellow inspectors know more about it. 👍
Good job everyone.
Don’t use adhesive and staples.. you can see the flat spots and kinks in the bead due to drywall has same issues. Use taping mud to attach bead, you can adjust bead in or out as needed. Pin where needed until dry. Mesh tape and coat 😎. Don’t hotmud plastic trim it doesn’t bond well
That has to be the absolute worst music ever on youtube.
Thanks
Que chingona es esta mora ❤
Thank you
And now your shower looks like an RV. mud and sand right to the profile crisp and clean with the proper caulk to seal the paint.
Not glued? Just stapled?
As a city inspector this is a great product idea and can’t wait to see it used in the field!
I just got photos from a project using F channel. The mud went over the trim and we don't have really nice clean straight lines like you have. What do you think happened? I'm thinking they didn't use enough adhesive and there is too much give on the trim, and so it went over.
you explained this 100x better than mat risinger and actually showed it coming together. yet his video has 1m views. youtube algo you hear me? get it together
You lovely girls are very very good on the trowel and all the other aspects of the trade..you must have grown up with it in the family..I am impressed..I spent 40 years doing the plastering trade domestic work to commercial jobs...and you would go a long way to see a team like you two...greetings from Australia
I would rather use more glue than have a chance of the bead cracking in the future.
Tear away is inferior to tape on, with its square corner its easily over sanded leaving a visible line at the mud break. The tear away portion makes it tough to have a consistent reveal(you can’t see the reveal) Use tape on trim and leave a caulk gap, to mask use paper joint tape fold in center use your 6”knife to push into gap. After you coat L trim run knife between bead and paper, when mud is dry pull out paper and you can a perfect gap
I guess I'll give you my millions more idea . The pad for the Black widow make them for 9-in power sanders
Is that stuff around the arch flex tape or some sort of vinyl?
❤❤❤❤
❤❤❤
Thanks ❤
Thanks for good information ❤
❤❤❤❤
Thanks ❤
Thanks ❤
Thanks 😊
Thanks
We got our trim Tex from a local interior supplier here in Anchorage. Had to order from Seattle. But so excited to install it.
Excellent news n products ❤
I cant find it on Amazon. Weher we can find it❤
Hello great day great work you are doing
I literally lost count how many contractors been through. Ripped off etc. I think I need these two to finish my house which should take one day. Keep up the good work gals. Wish you were in ky
🔥🔥🔥🤭🤭
I like your work...
Awarded least informative vid ever!
Where to buy? They don’t sell any Trimtex anywhere near me…… regular corner bead is all they have available here…..
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Where can I buy that item shadow bead
are you referring to the corner bead that you need the pink spray adhesive to attach it to the drywall? that stuff sucks. you definitely need seam tape for the edges
great explanation!
Why don't you try instructions what is wrong with your marketing dept.
Wordy words are hard, you can't sue instructions if we don't give any lmao.
Didn't even go over basic installation this was a non article, I mean there is branding and also whatever this was...
Great products!
Cool!✅👏🏻😎
You two are AMAZING keep up the great work !!