Would you be able to recommend a heatsink and fan for the stock motor. I no there would be alot if info on Facebook but I'm not on there. One last things (columbo voice) what hinge pins you using as an upgrade please.
@SnoriRC4 күн бұрын
Personally I don’t bother with heat sinks. I use a plastic Castle blower affixed with cable ties. I find the metal heat sinks pop off when stunting heavily and they add extra weight to the floating motor. 👍 Hinge pins are on EBay look for “JP Bashed MT8 hinge pins” 👀
@sauceNkicks4 күн бұрын
@@SnoriRC great. Thanks for the info. I'm gonna try those hinge pins
@sauceNkicks5 күн бұрын
Wish I could find that rear wing somewhere
@SnoriRC5 күн бұрын
REDCAT RACING KAIJU EXT.
@sauceNkicks5 күн бұрын
@@SnoriRC cheers
@greenie437 күн бұрын
Nice xmaxx! Subbed supporting our community!! 😎👍
@JPBashed8 күн бұрын
Nice video, car looks dialled in brother. Ripping round really well on that gravel surface. Super fast and super stable, nice build. Fully agree about the servo. I also think if you fit the treal servo saver mod out the box the stock servo is more than up for the job. You forgot to mention your aluminium hubs and carriers and hub extenders and updated turnbuckles too ha ha. After using 3 x different arms I would actually agree the EXT ones seem to suit the car best. Love RPM but they are so heavy and make the car sag loads 😉 Rocket motor looking good too
@SnoriRC8 күн бұрын
No hub extenders on this. Kept it narrow for handling. I might put stock MT8 tires back on. It feels like a truggy with these badlands. I wanted it to be the best MT I could build not a truggy!
@JPBashed8 күн бұрын
@@SnoriRC ha ha love it. Well it was flying round nicely and it’s a great example of an MT8 EXB
@SnoriRC8 күн бұрын
@@JPBashed Annoyed that lower screw fell out. I’ve lost a few of those previously too. This seems to be an issue with the aluminium front hubs mainly because you can’t use much threadlock otherwise you lock the hat bushes up with any spillage.
@JPBashed8 күн бұрын
@@SnoriRC Yep had the same issues and as you know with mine was unable to tighten up sufficiently so I put lock tight on one side and super glue on the other screws to see which worked. Both did and screws are still in. Shame I cracked the the one hub carrier the other day when i wiped out. Now I’m going to have the same issues when fitting the new spare set I have! 🤦♂️
@Nocturnzzz18 күн бұрын
You running it on 4s?
@lyricofwise689429 күн бұрын
Is the standing backflips done stock?
@bigaltoughАй бұрын
Nice shoes Tim lol, beast of a trick is the mt8, we need to meet up again bro it's been ages lol
@SnoriRCАй бұрын
I often slip a pair of Croc sandals on when bashing. I’m fashion mad me. 😂
@bigaltoughАй бұрын
@SnoriRC lol, when I see them I was like wtf lol I couldn't wear them.on gravel ground u will get stones under ur toes lol
@SnoriRCАй бұрын
@@bigaltough Made of strong stuff in Derbyshire brother 🩴
@captaincouldvercАй бұрын
😆 🤣 Thank you sir, can I have another. 😆 😆 Love ya Mitty!
@SnoriRCАй бұрын
Just checking you watched till the end! 😂
@Dj_Not_NiceАй бұрын
It team associated even a racing brand anymore?
@SnoriRCАй бұрын
100% it is. Still one of the most successful racing brands in the world.
@allscalercАй бұрын
Sweet I just ordered one yesterday! Just subscribed to your channel! 👍👍👍👍
@SnoriRCАй бұрын
Join the Rival MT8 owners group on Facebook. Lots of support there dude!
@allscalercАй бұрын
@@SnoriRC Thanks will do.
@LiftWithLouisАй бұрын
Purpose of the strap on the rear ?
@SnoriRCАй бұрын
It’s a very cheap and simple anti body ejection strap!! I’ve got a video about it on here.
@Rc.me.1Ай бұрын
Great truck dude. Love mine
@SnoriRCАй бұрын
Favourite truck I own. 👍
@pafsrh4744Ай бұрын
Nice
@arturrezmer4165Ай бұрын
Nice
@SnoriRCАй бұрын
🙏 thanks
@MarkIrons71Ай бұрын
“Dog shit everywhere” classic.
@bigaltoughАй бұрын
Wat u been feeding that 😂😂😂
@bigaltoughАй бұрын
Whst u doin tomorrow morning bro? Fancy meeting up for a bash tom in leicester with 5 other you tubers?
@sonofevil77Ай бұрын
Yes sir!
@ThunderxspeedRC2 ай бұрын
Nice run 🎉
@SnoriRCАй бұрын
Thanks 😁
@kenmastersmaster2 ай бұрын
Any luck gearing up? Should hit 80-90mph
@SnoriRCАй бұрын
With it summer now in England I’m aiming for 80+
@StriK3R_Versace2 ай бұрын
like
@MechanicallyFun2 ай бұрын
Great bash, awesome backflips. Is the arm still stock? Subbed🙏🏼
@SnoriRC2 ай бұрын
Arm is Kaiju so I think that’s what allowed the CVD to bend. The Kaiju arms have plenty of flex!
@ryanfox21822 ай бұрын
Love these thingns
@bigaltough2 ай бұрын
Yo Tim that triple was pretty sick not goin to lie 😂😂😂, we r out Monday if u fancy a trip to Leicester? If u r up for it I'll send u a link to where we r goin, remember wen we went to the Derby track? Well this one is bigger and better 😊
@ChriswithaCrc2 ай бұрын
Awesome Bash there SIR Mit of TA ! that tripple was awesome ;) Yeah defo love this truck way to much fun and love the fact there are loads of us still enjoying this truck :) Cant wait for CRCU to make the upgrades for it Stay awesome Brother and looking forward to when we can finally meet up for a bash . Chris :)
@SnoriRC2 ай бұрын
Cheers dude!!! 🎉
@GemFarmer762 ай бұрын
Awesome 👍 Show all the mt8 haters
@SnoriRC2 ай бұрын
MT8 is a BEAST!
@Rc.me.1Ай бұрын
@SnoriRC 100% agree. Talbot done this truck no favours. Great bash, dude
@sonofevil772 ай бұрын
Just had to replace my steering rack. Can't wait to get home and bash!
@SnoriRC2 ай бұрын
Breaks are annoying but I like repairing them so it’s all good! 👍
@bigaltough2 ай бұрын
Alright buddy I see u have brought 2 tickets for crusty's outcast 4s? Good lad, r u goin to go to the wheelspin open day on the 20th April?
@sarahbrowning14253 ай бұрын
Promo>SM
@Jb81863 ай бұрын
Mad.
@hitman38023 ай бұрын
How long Time is possibile to driving?
@SnoriRC2 ай бұрын
Easily over 30 minutes with 2 8200mah batteries.
@hitman38022 ай бұрын
@@SnoriRC Thanks.
@thierryc.83603 ай бұрын
Hi smori rc, Juste perfect Traxxas X-Max France 🇨🇵 👋
@SnoriRC3 ай бұрын
Bonjour!
@spenn20073 ай бұрын
This is probably the best rip of this POS i have seen on KZread. You increased the handling, which is what i didn't like about mine, and the destroyed gears too. Great job making the most out of this RC, because it left a bad taste in my mouth.
@SnoriRC3 ай бұрын
This area and surface and its little jumps are a good showcase for it. I’ve really enjoyed driving it and trying to find a good combination of gears and set up.
@jagergerg97713 ай бұрын
If you want a little more power a Max 6 will fit in, no mods needed
@SnoriRC3 ай бұрын
That might be up next! But it’s great like this - possibly wait until the Traxxas Esc goes up in flames 🔥
@rigoarredondo19863 ай бұрын
I been running my stock esc for almost 3years now no problems
@JesseBlum3 ай бұрын
8s!!! How fast does this go? BC I have a 2847-4000kv motor 45amp ESC with a 3s 3000mah 80c and we got that bad boy at 58mph! its a 1/14 scale.
@SnoriRC3 ай бұрын
As they get bigger and heavier it’s hard to get the speed. But I’d imagine this one goes high 40s maybe 50mph at a push. I barely use full throttle in these videos. But it has a LOT of torque!!!
@poopilypoo49643 ай бұрын
that is some awesome control on your end haha trider to drive my friends xmaxx almost got it totalled🤣
@SnoriRC3 ай бұрын
It helps when’s there’s nothing to actually hit!!! 🤣
@poopilypoo49643 ай бұрын
@@SnoriRC🤣🤣🤣well fair enough you are right 🤣
@pinoyrcmaker723 ай бұрын
Great and wild Rc 😊and perfect location 👍
@mariasigsgaard71113 ай бұрын
må jeg gerne få en X maxx
@owen85383 ай бұрын
Gr8 track 4 x maxx just needs container on the side
@bigaltough3 ай бұрын
That was a hit and a half nro damm, I don't nonif I commented on the video bit fancy hitting the only thing in the field lol
@SnoriRC3 ай бұрын
Hahaha!! That’s exactly what I thought. 😂
@patmarcus1723 ай бұрын
What a fantastic space !
@captaincouldverc3 ай бұрын
Give'er hell!
@captaincouldverc3 ай бұрын
Oh that was a gnarly hit! Mt8 tough!
@SnoriRC3 ай бұрын
Proper out of nowhere! - slowed it down and it looks like the bumper takes the impact.
@Jb81863 ай бұрын
What happened to the car?
@SnoriRC3 ай бұрын
The gears stripped out. Lost all Drive.
@user-ys1bl7qj3w4 ай бұрын
Hi, you're making it fun ^^ 19 Opinion 46 Spur? I wonder what the difference is from 20/46. Which gear ratio do you recommend
@SnoriRC3 ай бұрын
20/50 ratio is my preferred - with stock tires.
@DozersRCPlay-vf4pd4 ай бұрын
Nice! You have a nice launching ramp spot. Works very good.😄
@SnoriRC4 ай бұрын
Problem with this area is that when you need to lift the nose you have to jab the throttle pretty hard. Especially with smaller pinions and less wheel speed. The launch ramp is natural so unpredictable. Sometimes unavoidably you land with a little throttle applied. Which is why the Pinion got destroyed on that final slap. 👋
@harlemNYCrc4 ай бұрын
🔥
@fazerhermultuate44594 ай бұрын
I do not think you are aware of how your X-maxx will perform. You are not tearing anything up, but good practice.
@SnoriRC4 ай бұрын
Thanks dude! 🎉
@TheScorpionSwayzeTrainBanditАй бұрын
Not everyone wants to destroy there stuff lol. It’s his xmaxx he’ll use it how he wants
@SnoriRCАй бұрын
@@TheScorpionSwayzeTrainBandit Thanks dude - The amount it breaks just doing this makes me wonder how Thunder RC keeps his on the road!
Пікірлер
Would you be able to recommend a heatsink and fan for the stock motor. I no there would be alot if info on Facebook but I'm not on there. One last things (columbo voice) what hinge pins you using as an upgrade please.
Personally I don’t bother with heat sinks. I use a plastic Castle blower affixed with cable ties. I find the metal heat sinks pop off when stunting heavily and they add extra weight to the floating motor. 👍 Hinge pins are on EBay look for “JP Bashed MT8 hinge pins” 👀
@@SnoriRC great. Thanks for the info. I'm gonna try those hinge pins
Wish I could find that rear wing somewhere
REDCAT RACING KAIJU EXT.
@@SnoriRC cheers
Nice xmaxx! Subbed supporting our community!! 😎👍
Nice video, car looks dialled in brother. Ripping round really well on that gravel surface. Super fast and super stable, nice build. Fully agree about the servo. I also think if you fit the treal servo saver mod out the box the stock servo is more than up for the job. You forgot to mention your aluminium hubs and carriers and hub extenders and updated turnbuckles too ha ha. After using 3 x different arms I would actually agree the EXT ones seem to suit the car best. Love RPM but they are so heavy and make the car sag loads 😉 Rocket motor looking good too
No hub extenders on this. Kept it narrow for handling. I might put stock MT8 tires back on. It feels like a truggy with these badlands. I wanted it to be the best MT I could build not a truggy!
@@SnoriRC ha ha love it. Well it was flying round nicely and it’s a great example of an MT8 EXB
@@JPBashed Annoyed that lower screw fell out. I’ve lost a few of those previously too. This seems to be an issue with the aluminium front hubs mainly because you can’t use much threadlock otherwise you lock the hat bushes up with any spillage.
@@SnoriRC Yep had the same issues and as you know with mine was unable to tighten up sufficiently so I put lock tight on one side and super glue on the other screws to see which worked. Both did and screws are still in. Shame I cracked the the one hub carrier the other day when i wiped out. Now I’m going to have the same issues when fitting the new spare set I have! 🤦♂️
You running it on 4s?
Is the standing backflips done stock?
Nice shoes Tim lol, beast of a trick is the mt8, we need to meet up again bro it's been ages lol
I often slip a pair of Croc sandals on when bashing. I’m fashion mad me. 😂
@SnoriRC lol, when I see them I was like wtf lol I couldn't wear them.on gravel ground u will get stones under ur toes lol
@@bigaltough Made of strong stuff in Derbyshire brother 🩴
😆 🤣 Thank you sir, can I have another. 😆 😆 Love ya Mitty!
Just checking you watched till the end! 😂
It team associated even a racing brand anymore?
100% it is. Still one of the most successful racing brands in the world.
Sweet I just ordered one yesterday! Just subscribed to your channel! 👍👍👍👍
Join the Rival MT8 owners group on Facebook. Lots of support there dude!
@@SnoriRC Thanks will do.
Purpose of the strap on the rear ?
It’s a very cheap and simple anti body ejection strap!! I’ve got a video about it on here.
Great truck dude. Love mine
Favourite truck I own. 👍
Nice
Nice
🙏 thanks
“Dog shit everywhere” classic.
Wat u been feeding that 😂😂😂
Whst u doin tomorrow morning bro? Fancy meeting up for a bash tom in leicester with 5 other you tubers?
Yes sir!
Nice run 🎉
Thanks 😁
Any luck gearing up? Should hit 80-90mph
With it summer now in England I’m aiming for 80+
like
Great bash, awesome backflips. Is the arm still stock? Subbed🙏🏼
Arm is Kaiju so I think that’s what allowed the CVD to bend. The Kaiju arms have plenty of flex!
Love these thingns
Yo Tim that triple was pretty sick not goin to lie 😂😂😂, we r out Monday if u fancy a trip to Leicester? If u r up for it I'll send u a link to where we r goin, remember wen we went to the Derby track? Well this one is bigger and better 😊
Awesome Bash there SIR Mit of TA ! that tripple was awesome ;) Yeah defo love this truck way to much fun and love the fact there are loads of us still enjoying this truck :) Cant wait for CRCU to make the upgrades for it Stay awesome Brother and looking forward to when we can finally meet up for a bash . Chris :)
Cheers dude!!! 🎉
Awesome 👍 Show all the mt8 haters
MT8 is a BEAST!
@SnoriRC 100% agree. Talbot done this truck no favours. Great bash, dude
Just had to replace my steering rack. Can't wait to get home and bash!
Breaks are annoying but I like repairing them so it’s all good! 👍
Alright buddy I see u have brought 2 tickets for crusty's outcast 4s? Good lad, r u goin to go to the wheelspin open day on the 20th April?
Promo>SM
Mad.
How long Time is possibile to driving?
Easily over 30 minutes with 2 8200mah batteries.
@@SnoriRC Thanks.
Hi smori rc, Juste perfect Traxxas X-Max France 🇨🇵 👋
Bonjour!
This is probably the best rip of this POS i have seen on KZread. You increased the handling, which is what i didn't like about mine, and the destroyed gears too. Great job making the most out of this RC, because it left a bad taste in my mouth.
This area and surface and its little jumps are a good showcase for it. I’ve really enjoyed driving it and trying to find a good combination of gears and set up.
If you want a little more power a Max 6 will fit in, no mods needed
That might be up next! But it’s great like this - possibly wait until the Traxxas Esc goes up in flames 🔥
I been running my stock esc for almost 3years now no problems
8s!!! How fast does this go? BC I have a 2847-4000kv motor 45amp ESC with a 3s 3000mah 80c and we got that bad boy at 58mph! its a 1/14 scale.
As they get bigger and heavier it’s hard to get the speed. But I’d imagine this one goes high 40s maybe 50mph at a push. I barely use full throttle in these videos. But it has a LOT of torque!!!
that is some awesome control on your end haha trider to drive my friends xmaxx almost got it totalled🤣
It helps when’s there’s nothing to actually hit!!! 🤣
@@SnoriRC🤣🤣🤣well fair enough you are right 🤣
Great and wild Rc 😊and perfect location 👍
må jeg gerne få en X maxx
Gr8 track 4 x maxx just needs container on the side
That was a hit and a half nro damm, I don't nonif I commented on the video bit fancy hitting the only thing in the field lol
Hahaha!! That’s exactly what I thought. 😂
What a fantastic space !
Give'er hell!
Oh that was a gnarly hit! Mt8 tough!
Proper out of nowhere! - slowed it down and it looks like the bumper takes the impact.
What happened to the car?
The gears stripped out. Lost all Drive.
Hi, you're making it fun ^^ 19 Opinion 46 Spur? I wonder what the difference is from 20/46. Which gear ratio do you recommend
20/50 ratio is my preferred - with stock tires.
Nice! You have a nice launching ramp spot. Works very good.😄
Problem with this area is that when you need to lift the nose you have to jab the throttle pretty hard. Especially with smaller pinions and less wheel speed. The launch ramp is natural so unpredictable. Sometimes unavoidably you land with a little throttle applied. Which is why the Pinion got destroyed on that final slap. 👋
🔥
I do not think you are aware of how your X-maxx will perform. You are not tearing anything up, but good practice.
Thanks dude! 🎉
Not everyone wants to destroy there stuff lol. It’s his xmaxx he’ll use it how he wants
@@TheScorpionSwayzeTrainBandit Thanks dude - The amount it breaks just doing this makes me wonder how Thunder RC keeps his on the road!