Hey brother I have a very similar build was wondering if you were still on stock axels
@rotaryrocket743 ай бұрын
.92 AR? that must be a lazy turbo in that car.
@Brolly143 ай бұрын
Yo! If you’re willing, I would like to bounce some ideas with you. What’s the best way to communicate with you brother. Looking to boost my hp from stock.
@Brolly143 ай бұрын
Do you have any suggestions if I just wanna get my ST a little over 300hp? I’m not so speed driven but would love to get an extra 50-55hp on top of my stock hp with my existing turbo. Would love to talk shop with you, would you be willing to message privately?
@alexjarman96583 ай бұрын
I have same car, stroker built motor for 700+ I have pump gas tune pushing around 400 without my port injection fuel hooked up Can’t wait to tune it for E85
@WhiteblurrST4 ай бұрын
Good stuff, i was 542whp last year on my 2.0 build. Finishing up my stroker build now
@WhiteblurrST4 ай бұрын
Did you sell you sell your car ?
@dham994 ай бұрын
how does this turbo fit compared to the BNR2867/3071 series? I love that my BNR71 fits nicely, and the oil and coolant lines are alread set for me. I'd hate to have to reroute/figure out how to get different turbo set up in there.
@dham994 ай бұрын
that turbo looks like it has such a short power band...did they up your redline at all? My BNR3071 (XDi hpfp/injectors) has a pretty good power band and is in good boost well before 4k rpm. All that power for a quick shift..its a trade off. Only downside is my BNR71 maxes out around 500whp.. and im building the engine right now for more than that so I may have to find a better turbo. but i hear BNR is coming out with a v2 of the BNR71 that'll bump whp up another 25+..might be worth the trade up. that car's immaculate, took really good care of it! what clutch are you running? I have the Spec stage3+ with their lw flywheel sitting in the garage once the engine goes back in next week or two.
@BSquaredmotors7 ай бұрын
Boizzzz y’all are not ready for this build on my ST. 2.0 ecoboost bottom end, and a tubular manifold not from the same cylinder head and no longer controlled by ford 🤭
@Gunzla3310 ай бұрын
G series turbos are awesome! Only thing that annoys me is the whistle i get when cruising around. It sounds like a jet getting ready to take off
@davidgriggs396711 ай бұрын
Hope you upgraded your oil cooler.
@numinous4789 Жыл бұрын
I know EWG is either love it or hate it. I’m in the 🤮 category. Great turbo choice, though.
@adds8254 Жыл бұрын
Okay, now I need a ST
@Kendo895. Жыл бұрын
Sorry bro but I smell BS but a good video😂
@lettuce9612 Жыл бұрын
What intake is that?! And what filter is that???
@ikejackson8676 Жыл бұрын
Nice
@dham99 Жыл бұрын
always fun to be able to tell people you were enjoying some time with your Focus Group this weekend ^_^
@dham99 Жыл бұрын
all that power and i think its still sportin' stock calipers/brakes...you're brave! at least toss on some RS Brembos...huge upgrade for a small amount of money and its all bolt-on (and maybe change wheels if they're not set up right). I do run a nice oil cooler set up which helps at the track, not so much for a daily... and between the FL-400S oil filter (.25qt increase) and the Mishimoto thermostatic plate controlled cooler (.75qt increase), i get an extra full quart of oil which is always nice.. even around 500+ that thing is a monster... whats the most upsetting car you've run? (unofficially, in Mexico of course... ^_^ )
@captainhellhound74516 ай бұрын
Seriously the stock ones heat soak so quickly it feels
@dham99 Жыл бұрын
crazy sleeper for sure...beautiful color! one thing I'm surprised you didn't comment on was your PCV set up...i see a vented oil cap...which i heard can cause a mess...I run a Damond stage 1 off the manifold (custom vta), a JLT rear (on the intake), and have a Radium PCV plate with a spare OCC im putting on to also VTA... this is for a BNR71/XDi hpfp set up with a 400-430whp goal... i cant even imagine what your lag is like with a 600hp set up... ive been FBO/e30 stock turbo for years, but all these parts are in the garage and i started the install last weekend. I'm sure mine will be a night and day difference, then to even fathom 600hp in this platform would be just insane to drive at full potential ^_^ nice build, clean beautiful car...ill check to see if you have other videos... i love sleepers and would love to see this thing whoop up on some big powered cars!
@sanehiggs1646 Жыл бұрын
Make sure send me the next video.
@sanehiggs1646 Жыл бұрын
Wow dude mirror to mirror with a Hellcat 😮
@2JJays Жыл бұрын
How much did the motor and turbo cost in total?
@NeverFollowTheCrowd Жыл бұрын
Why the hot ram intake ?
@Fordfocusstmk3250 Жыл бұрын
Judging by the comments nobody listened to what you said... Idiots lol 🤣🙈
@ThatLankyGuy111 Жыл бұрын
Can u please send me tell me ur entire build list for this on pump gas I do not wanna go with E. I will be over building the car and plan to stay right in this range of HP on pump gas and this same turbo. 2017 ST 69,000 miles love these cars so much.
@ThatLankyGuy111 Жыл бұрын
Currently have, stage 3 boomba rear motor Mount, 100% atmosphere boomba BOV with true vacuum I ran myself, boomba intake spacer for WMI here soon not tuning for it just for cleaning purposes, fswerks fmic, fswerks short shift kit, Megan racing 3” catless DP, with custom 3” straight after I did myself, hate all u want been running cobb stage 3 OTS tune from 17,000 too 69,000 now no issue whatsoever, also made a custom intake scoop out of sheet metal feeding the green filter stock air intake tubing pull 1 degree below ambient during pulls, NGK spark plugs gapped accordingly. I run motor craft synthetic blend with a quart of Lucas full synthetic additive with a motor craft 400ls filter all changed at 2800-3000 miles. Again please let me know ur full build list I’m very passionate about car and this ST in particular, and extremely attentive to details and maintenance.
@rankmeuptoday2119 Жыл бұрын
great video! you should go water to air intercooler set up it will reduce the lag a lot and more hp better iat's
@brandonlassiter983 Жыл бұрын
Would you recommend speed performance long block
@LegendairyJC Жыл бұрын
What are the wheels?
@joseluisdiaz8438 Жыл бұрын
How much was the budget?
@pawdre5151 Жыл бұрын
9k with most labor done himself.
@tcsco.8888 Жыл бұрын
Car weight to wheel horsepower. Uou think it will smoke a he'll cat?
@docsfpv518 Жыл бұрын
Are you happy you went with a st1 over say a st2 or st3? I’m set on my next cad being a focus st and depending on prices when I go to buy one this year I might have to settle for a st1
@chasep7705 Жыл бұрын
Hey man, I plan on going with a 25-660 in the next few months, and I’m on stock motor. I’m gonna go with .92 ar because I do enjoy a later spool, but even then it isn’t that late in the rev range. Any advice while having this motor stock turbo? Thanks in advance
@FortunaChristopher Жыл бұрын
Hey are you using the stock dualmass flywheel with the clutch or are you using a aluminum flywheel, love the build keep up on the videos
@hoondagang4919 Жыл бұрын
Weird energy when you rolled Up his window lol
@garrettmacwhinney5358 Жыл бұрын
any update on this car or a new project? I've been driving an st with a 2867r, stock fueling on pump gas for a couple years now. Looking at RS's at auctions to pull the drivetrain out and convert the st to awd with a similar turbo setup to this.
@lyfewithpiglet582 Жыл бұрын
Wtf is the point of this build if you aren't racing it?
@abdaaustin Жыл бұрын
Hey man, I just bought this car and have some questions for you.
@ultimaartz-justinm.70 Жыл бұрын
I’ve watched your build and recently starting to take a direction towards the same build. G25-660, speed pop and drop kit, oem head, port and obvious other bolt on mods. I’m curious, I hear that the g25-660 with the .72 AR on a 2.0L maxes out at about 645ish crank HP, and about 580 wheel. Have you dyno’d your car yet? Any concerns or issues with the 2618 pistons, and did you go with the H beam rods, or did you get I beams instead?
@skinnycol809 Жыл бұрын
my buddy has a 757hp focus here in michigan, soon ima go to his tuner. insane to get that amount of power off these blocks
@kennethelliott5985 Жыл бұрын
You need a mountune intake manifold
@MichaelDouglas-24 Жыл бұрын
Dope asf. Fost ftw
@metallicnatsu Жыл бұрын
what mountain/roads do you drive on around atl ?
@cecilbermudez8679 Жыл бұрын
Wasn’t sure if I asked this already, you said you were running a HKS, I thought you could not run that with the Guardian Angel?
@Timilias Жыл бұрын
Hey nice vid! The 550whp - what fuel is this on? Pump only or alcohol blends?
@patrickhosun2222 Жыл бұрын
Bjr je suis de l'île de la réunion je possède un focus st mk3 je voudrais la monter en 2.3 que me conseillez vs pour la forge comme pièce merci de votre retour j adore vs vidéo
@jamesgrosso89202 жыл бұрын
A/R Ratio is Air/Radius Ratio
@ryanjames19752 жыл бұрын
Sell it and put the badges on a real car. Ha, j/k good video
@jessebudelman2 жыл бұрын
What you got done for engine and transmission internals? Looking to build my bottom end and go G series turbo (450-470hp goal, maybe 500 idk yet).
Пікірлер
What happened? Why are there no new videos?
Hey brother I have a very similar build was wondering if you were still on stock axels
.92 AR? that must be a lazy turbo in that car.
Yo! If you’re willing, I would like to bounce some ideas with you. What’s the best way to communicate with you brother. Looking to boost my hp from stock.
Do you have any suggestions if I just wanna get my ST a little over 300hp? I’m not so speed driven but would love to get an extra 50-55hp on top of my stock hp with my existing turbo. Would love to talk shop with you, would you be willing to message privately?
I have same car, stroker built motor for 700+ I have pump gas tune pushing around 400 without my port injection fuel hooked up Can’t wait to tune it for E85
Good stuff, i was 542whp last year on my 2.0 build. Finishing up my stroker build now
Did you sell you sell your car ?
how does this turbo fit compared to the BNR2867/3071 series? I love that my BNR71 fits nicely, and the oil and coolant lines are alread set for me. I'd hate to have to reroute/figure out how to get different turbo set up in there.
that turbo looks like it has such a short power band...did they up your redline at all? My BNR3071 (XDi hpfp/injectors) has a pretty good power band and is in good boost well before 4k rpm. All that power for a quick shift..its a trade off. Only downside is my BNR71 maxes out around 500whp.. and im building the engine right now for more than that so I may have to find a better turbo. but i hear BNR is coming out with a v2 of the BNR71 that'll bump whp up another 25+..might be worth the trade up. that car's immaculate, took really good care of it! what clutch are you running? I have the Spec stage3+ with their lw flywheel sitting in the garage once the engine goes back in next week or two.
Boizzzz y’all are not ready for this build on my ST. 2.0 ecoboost bottom end, and a tubular manifold not from the same cylinder head and no longer controlled by ford 🤭
G series turbos are awesome! Only thing that annoys me is the whistle i get when cruising around. It sounds like a jet getting ready to take off
Hope you upgraded your oil cooler.
I know EWG is either love it or hate it. I’m in the 🤮 category. Great turbo choice, though.
Okay, now I need a ST
Sorry bro but I smell BS but a good video😂
What intake is that?! And what filter is that???
Nice
always fun to be able to tell people you were enjoying some time with your Focus Group this weekend ^_^
all that power and i think its still sportin' stock calipers/brakes...you're brave! at least toss on some RS Brembos...huge upgrade for a small amount of money and its all bolt-on (and maybe change wheels if they're not set up right). I do run a nice oil cooler set up which helps at the track, not so much for a daily... and between the FL-400S oil filter (.25qt increase) and the Mishimoto thermostatic plate controlled cooler (.75qt increase), i get an extra full quart of oil which is always nice.. even around 500+ that thing is a monster... whats the most upsetting car you've run? (unofficially, in Mexico of course... ^_^ )
Seriously the stock ones heat soak so quickly it feels
crazy sleeper for sure...beautiful color! one thing I'm surprised you didn't comment on was your PCV set up...i see a vented oil cap...which i heard can cause a mess...I run a Damond stage 1 off the manifold (custom vta), a JLT rear (on the intake), and have a Radium PCV plate with a spare OCC im putting on to also VTA... this is for a BNR71/XDi hpfp set up with a 400-430whp goal... i cant even imagine what your lag is like with a 600hp set up... ive been FBO/e30 stock turbo for years, but all these parts are in the garage and i started the install last weekend. I'm sure mine will be a night and day difference, then to even fathom 600hp in this platform would be just insane to drive at full potential ^_^ nice build, clean beautiful car...ill check to see if you have other videos... i love sleepers and would love to see this thing whoop up on some big powered cars!
Make sure send me the next video.
Wow dude mirror to mirror with a Hellcat 😮
How much did the motor and turbo cost in total?
Why the hot ram intake ?
Judging by the comments nobody listened to what you said... Idiots lol 🤣🙈
Can u please send me tell me ur entire build list for this on pump gas I do not wanna go with E. I will be over building the car and plan to stay right in this range of HP on pump gas and this same turbo. 2017 ST 69,000 miles love these cars so much.
Currently have, stage 3 boomba rear motor Mount, 100% atmosphere boomba BOV with true vacuum I ran myself, boomba intake spacer for WMI here soon not tuning for it just for cleaning purposes, fswerks fmic, fswerks short shift kit, Megan racing 3” catless DP, with custom 3” straight after I did myself, hate all u want been running cobb stage 3 OTS tune from 17,000 too 69,000 now no issue whatsoever, also made a custom intake scoop out of sheet metal feeding the green filter stock air intake tubing pull 1 degree below ambient during pulls, NGK spark plugs gapped accordingly. I run motor craft synthetic blend with a quart of Lucas full synthetic additive with a motor craft 400ls filter all changed at 2800-3000 miles. Again please let me know ur full build list I’m very passionate about car and this ST in particular, and extremely attentive to details and maintenance.
great video! you should go water to air intercooler set up it will reduce the lag a lot and more hp better iat's
Would you recommend speed performance long block
What are the wheels?
How much was the budget?
9k with most labor done himself.
Car weight to wheel horsepower. Uou think it will smoke a he'll cat?
Are you happy you went with a st1 over say a st2 or st3? I’m set on my next cad being a focus st and depending on prices when I go to buy one this year I might have to settle for a st1
Hey man, I plan on going with a 25-660 in the next few months, and I’m on stock motor. I’m gonna go with .92 ar because I do enjoy a later spool, but even then it isn’t that late in the rev range. Any advice while having this motor stock turbo? Thanks in advance
Hey are you using the stock dualmass flywheel with the clutch or are you using a aluminum flywheel, love the build keep up on the videos
Weird energy when you rolled Up his window lol
any update on this car or a new project? I've been driving an st with a 2867r, stock fueling on pump gas for a couple years now. Looking at RS's at auctions to pull the drivetrain out and convert the st to awd with a similar turbo setup to this.
Wtf is the point of this build if you aren't racing it?
Hey man, I just bought this car and have some questions for you.
I’ve watched your build and recently starting to take a direction towards the same build. G25-660, speed pop and drop kit, oem head, port and obvious other bolt on mods. I’m curious, I hear that the g25-660 with the .72 AR on a 2.0L maxes out at about 645ish crank HP, and about 580 wheel. Have you dyno’d your car yet? Any concerns or issues with the 2618 pistons, and did you go with the H beam rods, or did you get I beams instead?
my buddy has a 757hp focus here in michigan, soon ima go to his tuner. insane to get that amount of power off these blocks
You need a mountune intake manifold
Dope asf. Fost ftw
what mountain/roads do you drive on around atl ?
Wasn’t sure if I asked this already, you said you were running a HKS, I thought you could not run that with the Guardian Angel?
Hey nice vid! The 550whp - what fuel is this on? Pump only or alcohol blends?
Bjr je suis de l'île de la réunion je possède un focus st mk3 je voudrais la monter en 2.3 que me conseillez vs pour la forge comme pièce merci de votre retour j adore vs vidéo
A/R Ratio is Air/Radius Ratio
Sell it and put the badges on a real car. Ha, j/k good video
What you got done for engine and transmission internals? Looking to build my bottom end and go G series turbo (450-470hp goal, maybe 500 idk yet).