Пікірлер

• 
  @pangolinrendangered56832 күн бұрын

  It fits just fine at 0:12. lol

• 
  @DTWMTX2 күн бұрын

  Not bad for $15

• 
  @BilleyW-om9cr2 күн бұрын

  You already spend the money and then you want to spend more

• 
  @john924152 күн бұрын

  You fualt for driving miata

• 
  @wellzy98193 күн бұрын

  Cool design, But the cap can hold itself with the grooves. Can hang it on the lid with them

• 
  @SILKYG00SE3 күн бұрын

  Do you see the 2 hooks on the lid? Yeah, they are cord hooks.

• 
  @cmac11003 күн бұрын

  The cord doesn't look long enough to reach them then....

• 
  @MagentaSnowКүн бұрын

  @@cmac1100because they’re not cord hooks, however the gas cap can be situated right under the hook that holds the cover down. People are forgetting how to use their brains and it scares me.

• 
  @mikereynolds13683 күн бұрын

  Who ever designed that deserves a really nice payday from Mazda

• 
  @AbzalTursunbaev8 күн бұрын

  Черный это + красный это - да

• 
  @AbzalTursunbaev8 күн бұрын

  Черный это минус красный плюс

• 
  @garyy375819 күн бұрын

  Thanks for sharing, what makes you think the throttle body is the reason for the rocker cover oil leak?

• 
  @arvin_arn10 күн бұрын

  I think it was due to the old OEM gasket becoming brittle over time. I replaced the gasket in another video and haven't seen any leaks since then 👍 kzread.info/dash/bejne/rGuWrrl9p5radbQ.htmlsi=t5GQgW3Zyj-LpR01

• 
  @123mell101Ай бұрын

  Arvin I have a question about your interior what toyota oem radio are you using?

• 
  @arvin_arnАй бұрын

  It's a radio head unit from a Scion. Check out my video here where I install a microphone attachment to it. kzread.info/dash/bejne/ZGmn3Lidk5usoaQ.htmlsi=BoA4Y8UXgYPtg_hx

• 
  @123mell101Ай бұрын

  ​@arvin_arn You are the MAN bro thank you!!!

• 
  @John-wick-Ай бұрын

  Hi..Do I need to jack-up the front to install the strut bar? Is it to take pressure off the front shocks to install the bar?

• 
  @elikhuman3778Ай бұрын

  What benefits does changing the throttle body do?

• 
  @lovejoy1738Ай бұрын

  Dropped over 2 seconds, nice!

• 
  @joshisgarageАй бұрын

  the turtle was my favorite part

• 
  @John-wick-Ай бұрын

  Hey where can I buy an exhaust like yours? 10:10

• 
  @arvin_arnАй бұрын

  My exhaust is a DC Sports exhaust model SCS7041. Unfortunately, they discontinued making it so you'll have to look around. You could try ebay.

• 
  @91mАй бұрын

  I'm surprised you bought this with all the rust based on your statementin the video. I have a 2012 yaris se myself, scotty kilmer did a video on it. Looking at getting a miata as well, thinking of selling my gr corolla before i do, just kind of tired of it.

• 
  @arvin_arnАй бұрын

  With the prices of used cars local to me, specifically other NB Miata's, this was a steal and I knew going into it that there would be rust so I accepted the risk to get the car. The Yaris is still a great car and I don't plan to get rid of mine anytime soon. Still a capable track car, but the aftermarket support isn't there. Curious as to why you want to get rid of the GR to get a Miata?

• 
  @91mАй бұрын

  ​@arvin_arn gotcha, I understand, I'm sure Hawaii is a different market for Cars altogether, honestly I haven't Made a concrete decision on getting rid of the gr, but really I don't have to get rid of the gr to buy a miata, I just get tired of stuff, but I'm kind of conflicted.

• 
  @MintyFreshTurdsАй бұрын

  Out of dumb luck I bought a Yaris sedan wholesale in 2017, and I have been driving it ever sense!

• 
  @arvin_arnАй бұрын

  Nice! It's a great car! It hasn't let me down ever since I got mine in 2008 👍

• 
  @ScorpionMultimediaАй бұрын

  Nice brother and congratulations again on your new car I’m excited to see your journey with your new build

• 
  @arvin_arnАй бұрын

  Thanks man! Hope all is well!

• 
  @hazqdnl2492Ай бұрын

  Nice video

• 
  @arvin_arnАй бұрын

  Thanks!

• 
  @revo.dАй бұрын

  do they not let you drive fast? lmao

• 
  @NickodelicАй бұрын

  Nice pick up! Excited to follow your build with this!

• 
  @arvin_arnАй бұрын

  Thanks! Excited to see where it goes

• 
  @arctictruck10Ай бұрын

  Congrats on the new fun purchase. How much hp does this motor put out?

• 
  @arvin_arnАй бұрын

  I'm not sure actually. Mazda says it's rated at 142 hp, but I have yet to throw it on the dyno to get actual numbers.

• 
  @larwentz2 ай бұрын

  sweeeet! building my own, 07 hatch in aus, but idk if i shud try autocross someday… yet. your vids are encouraging!

• 
  @arvin_arn2 ай бұрын

  I would highly recommend it as it a cheap and easy way to get into motorsports!

• 
  @WIZMO4202 ай бұрын

  I need that intake! Where you get it

• 
  @arvin_arn2 ай бұрын

  Check out my K&N Intake video kzread.info/dash/bejne/oYuYo62Bktmbc8Y.htmlsi=9R2VkcKUupMwnG8F

• 
  @raqueladivett3192 ай бұрын

  I have a 2009 Yaris and I want to do this to mine but I’m scared to blow it up

• 
  @arvin_arn2 ай бұрын

  As long as you reconnect everything, it should be fine. Just take your time and take a photo as you go along. If you don't feel comfortable, grab a friend or take it to a reliable shop to install it for you.

• 
  @senpailanzyxd55182 ай бұрын

  Whats the size of your 1zz tb ? 60mm, 65mm or 70mm ?

• 
  @manuelhenriques3762 ай бұрын

  hello. whats the point of larger throtlle body with the same diameter intake hose? get a larger intake hose that fits outside the throtlle body for more air !!

• 
  @army2vegas2 ай бұрын

  How much?

• 
  @cyrillegreasley72543 ай бұрын

  Hey Arvin or who ever may know, will doing this make it so you don't pass the visual smog test for inspection? In the comments on Rassool Racings vids he said that you wouldn't pass with this mod. I'm living in New York and I think he's from California and not sure if there standards are different.

• 
  @arvin_arn3 ай бұрын

  Each state has their own requirements for car inspections. I live in Hawaii and we don't have smog inspections so I don't have to worry about this. I would check your specific state if they require a smog test before doing this swap.

• 
  @cyrillegreasley72543 ай бұрын

  I'm gonna give it a try and see what happens during my inspection this year. Might also check with a local mechanic. But anyways thanks for the helpful install video! @@arvin_arn

• 
  @KTannerPaisleyKK3 ай бұрын

  It's better to rent a car for the whole day than go to this ripoff rude place

• 
  @arvin_arn3 ай бұрын

  That would be ideal but I had limited time while in Vegas. At least I got something in return vs losing the money to the casino 👍

• 
  @KTannerPaisleyKK3 ай бұрын

  ​@@arvin_arnI wish you the best. My trainer was pressuring hard core angrily to go faster. I could see how they caused the death they did.

• 
  @MNice823 ай бұрын

  Rent a car and drive 70mph on the highway? Sounds so fun...

• 
  @KTannerPaisleyKK3 ай бұрын

  @@MNice82 Its a way better value to rent it for 24hrs. Plus there's another racing strip, racetrack in lasvegas.

• 
  @takumisato71263 ай бұрын

  Damn man this is disheartening, was going to buy these lightweight pulleys but now not so sure, if you had to due it over again would you install them again?

• 
  @arvin_arn2 ай бұрын

  I think I would still install them because they did make a slight difference in terms of how the car feels, but I can't confirm if they really did increase hp as there were too many factors that could have contributed to the dyno readings.

• 
  @rigobertotromp12144 ай бұрын

  Where did you buy the coilovers??

• 
  @arvin_arn4 ай бұрын

  You can buy them online through the BC Racing website or other aftermarket companies that sell coilovers

• 
  @lovejoy17384 ай бұрын

  Hey man! I really appreciate your videos. I am building a 2008 Yaris S 3 door hatch mainly for canyons and maybe an occasional track day. 2300LBS insanely good handling with coil overs and and sticky rubber.... Just need to find an extra 130HP 🙂

• 
  @arvin_arn4 ай бұрын

  Thanks for watching my videos! Yeah the extra hp could really help but it's hard when there isn't much options for these engines.

• 
  @goose0034 ай бұрын

  Awesome videos. How do you know what type of rims you want? Also, what’s the highest wheels you can put on the Yaris? I have a 2009 Yaris sedan 4 door and interested in fixing up my car.

• 
  @arvin_arn4 ай бұрын

  My selection of wheels is based on a few things like weight, wheel offset, tires and tire sizes I can run, and if they fit within the wheel arches without rubbing. Highest wheel? I'm assuming biggest diameter? Probably a 17", maybe 18", but you'd probably have issues with rubbing which is not great.

• 
  @Christhe4x4guy4 ай бұрын

  Lol why did you grease the bushing?! Youre supposed to only grease the center pin. It rotates inside the bushing.

• 
  @povilaslondon29 күн бұрын

  it literally says on the packaging from the manufacturer and also their video shows to put it like that.

• 
  @joshisgarage4 ай бұрын

  we should add some pit walk and banter if there's time in the vids bwahah

• 
  @arvin_arn4 ай бұрын

  There is always time in the videos 👍

• 
  @arctictruck104 ай бұрын

  Is there any upgrades available to do on the auto transmission?

• 
  @arvin_arn4 ай бұрын

  Not that i'm aware of

• 
  @takumisato71264 ай бұрын

  Need to do a 5 speed swap on your yaris, alot more challenging, just got myself a 2007 yaris sedan 5 speed thats got 65K original miles, going to be modding mine as well!

• 
  @arvin_arn4 ай бұрын

  It's been something i've considered doing for quite some time now, just a matter of finding time (and money) to do so

• 
  @takumisato71264 ай бұрын

  @@arvin_arn was your K&N cold air filter worth it? Considering doing one on mine as well, and what wing do you have on the rear window of your sedan?

• 
  @arvin_arn4 ай бұрын

  @@takumisato7126 Can't say for sure if the K&N made any improvements since I never took it to the dyno to get a before & after comparison, but it claims to add hp but it felt slightly better when I initially installed it. The rear wing I had on the rear window was from ebay. Search "rear windscreen" for the Toyota Yaris/Vios/Belta

• 
  @kil-09764 ай бұрын

  i noticed mine left rear bottoms down even the height is the same with the right side, is possible a bushing /bump rubber replacement?

• 
  @blackdeckerz0r4 ай бұрын

  Thanks dude, i will be going soon and nice to see a recent video

• 
  @kruiseorbruise5 ай бұрын

  Did it actually help handling bro? I have the Yaris hatchback and the handling is mad bad on cornering stock I am trying to fix it up going to start with coilovers or springs then the bar and, some sway bars

• 
  @arvin_arn2 ай бұрын

  They definitely helped, but my car was already setup with additional suspension components prior to installing. I would focus on the suspension first (coilovers/springs/dampers), sway bars, then bracing.

• 
  @codeninja1005 ай бұрын

  this is so dope what a cool experience

• 
  @arvin_arn5 ай бұрын

  Thanks! It was a blast driving these beautiful cars. If only I had more laps to really enjoy what these cars are capable of doing.

• 
  @arvin_arn5 ай бұрын

  Check out my other video where I drive the Porsche 991 GT3 RS here: kzread.info/dash/bejne/moxtlJh7p9TaYso.html

• 
  @arvin_arn5 ай бұрын

  Check out my other video where I drive the Ferrari 488 Challenge Evo here: kzread.info/dash/bejne/qIWdzMVvo7undLQ.html

• 
  @GabDailyVlogs6 ай бұрын

  Hello I just want to ask if you know the exact inner diameter of the intahe where the maf sensor is connected, i have been searching for months now and cant find the exact inner diameter of the maf sensor for 1nz to run properly, hope you can help thanks!

• 
  @lawrenceneufville13316 ай бұрын

  😁 Promo*SM

• 
  @valaus906 ай бұрын

  They don’t have for the hatchback

• 
  @arvin_arn6 ай бұрын

  This is only for the sedans

• 
  @miguelbourque7071Ай бұрын

  What the website

• 
  @bass18706 ай бұрын

  Vvivid i found is near impossible to glass out on a roof. There is a reason people use avery or 3M on roofs as its a much thinner easy to glass out wrap. I'dhave given up after half hour and conceded I used the wrong wrap for a easy roof job but you kept going till u got it done!!. Its a tough vinyl.