Пікірлер

• 
  @Edits_Football_WorldКүн бұрын

  Can i do it like the same by the Tomos Quadro?

• 
  @Tomology7 минут бұрын

  Yes!

• 
  @dorinabontemps60322 күн бұрын

  This modification make your bike like jet fighter

• 
  @SenpaiSkyy5 күн бұрын

  Really cool. Thank you for sharing

• 
  @koalagamer88646 күн бұрын

  kaj semering je drugačen ali enake dimenzije kot za original

• 
  @koalagamer88646 күн бұрын

  clutch rings are turned the wrong way just for info

• 
  @markovideski940111 күн бұрын

  How fast dose it go

• 
  @tomektomala610814 күн бұрын

  Ile oleju wchodzi do skrzyni biegów?

• 
  @Tomology14 күн бұрын

  250ml atf oil

• 
  @tomektomala610814 күн бұрын

  ​@@Tomologydziękuje za odp.

• 
  @joergmeinke295617 күн бұрын

  Habe auch 1 Thomos flexer 25 kmh es gibt keiner der mir helfen kann bis zu 800_1000€für die Reperatur das ist ihre.

• 
  @inc_val58418 күн бұрын

  where to buy adjustable boring head pleas let me know

• 
  @mhector8920 күн бұрын

  How fast mph....?

• 
  @gijsgreef22 күн бұрын

  Wat zijn de afmetingen op welke plek je dat gat in de zuiger maakte

• 
  @Tomology19 күн бұрын

  Precieze afmetingen weet ik niet. Het is vanuit de cilinder overgetrokken en op grootte gemaakt zodat de inlaat 360 graden open is.

• 
  @__alves_23 күн бұрын

  Looks awesome but i would paint some parts chrome to give its original look

• 
  @derkmateman215226 күн бұрын

  Welke dremel gebruikt u

• 
  @Tomology26 күн бұрын

  Een dremel 3000

• 
  @alexandarvidic26 күн бұрын

  Work of art, well done <3

• 
  @Tomology26 күн бұрын

  thank you! :)

• 
  @luukieboy89327 күн бұрын

  Waar kan ik de stofringen vinden? Lagers lukt nog wel!

• 
  @Tomology26 күн бұрын

  Bij Tomoshop! Stofrubber en keerring

• 
  @wilmerinfante8093Ай бұрын

  Nice bike dude 😊

• 
  @TomologyАй бұрын

  thank you!

• 
  @fredymredyАй бұрын

  Why that piston only have 1 piston ring, isnt better to have 2 for more compression?

• 
  @TomologyАй бұрын

  Some high rpm cylinders use only one ring to lower friction

• 
  @wutang_bing8090Ай бұрын

  Really wish you could do another restoration with some step step commentary But I’ll definitely be using these videos to rebuild a 97 targa lx I just picked up

• 
  @TomologyАй бұрын

  Hope it helps you out! I am not planning on doing step by step commentary videos.

• 
  @user-vd9jx1kt8uАй бұрын

  Im watching this working on 3 tomos at the same time cool video i fix and sell hit me up they are 1999 targa,tagralx pedal & none pedal.

• 
  @freespeachrulezАй бұрын

  looks like you forgot the washer shim under the clutch.

• 
  @TomologyАй бұрын

  It isn't very clear on film but you can see the shim at 3:33 ;)

• 
  @sin420hovaАй бұрын

  I need help with my moped

• 
  @TomologyАй бұрын

  What's the issue?

• 
  @sin420hovaАй бұрын

  @@Tomology My dad commented This💀Idk what he needs

• 
  @bulasturubula3660Ай бұрын

  I'm sure this thing would smoke my 650cc all day long xD

• 
  @TomologyАй бұрын

  I don't know about that ;)

• 
  @baswesten796Ай бұрын

  Kan ik dit ook thuis doen zonder alle apparatuur?

• 
  @TomologyАй бұрын

  Je hebt een aantal basistools nodig en een paar kleine extra tools, maar het is zeker thuis te doen!

• 
  @weegaz22Ай бұрын

  so what Model year and model of Tomos do these come on? looking for an upgrade to my Puch maxi and this seems ideal, disc front end, hydraulic foks etc

• 
  @TomologyАй бұрын

  This one is from a 2006 Tomos Revival. EBR brand. It is a good upgrade!

• 
  @bayuwidhiansyah19692 ай бұрын

  I love your work. Can you tell me what size rims and tires you use?

• 
  @Tomology2 ай бұрын

  Thank you! The front is 2.75x17 inch and the rear is 3.5x16 inch.

• 
  @bayuwidhiansyah19692 ай бұрын

  @@Tomology Thank you

• 
  @thedistance88432 ай бұрын

  Very beautiful, keep up the great work brother! Your hard work and dedication is well appreciated and recognized. 👏👏 well done! ❤️

• 
  @Samjuurlink2 ай бұрын

  6:20 is gewoon twee componentenlijm voor metaal toch?

• 
  @Tomology2 ай бұрын

  Ja. JB weld gebruik ik

• 
  @Samjuurlink2 ай бұрын

  @@Tomology Top! Dankjewel.

• 
  @senna85352 ай бұрын

  O Quadro e de mobilete?

• 
  @Tomology2 ай бұрын

  If you mean a Tomos Quadro, yes that is a moped

• 
  @florisvanvliet86072 ай бұрын

  Wat voor afplaktape wordt er eigenlijk in de video gebruikt?

• 
  @Tomology2 ай бұрын

  Die oranje schilderstape is bij de Action verkrijgbaar! Ik vind het zelf een fijne tape.

• 
  @florisvanvliet86072 ай бұрын

  ​@@TomologyThx!!

• 
  @lukapintaric63122 ай бұрын

  What lube did you used for the bearings?

• 
  @Tomology2 ай бұрын

  Atf transmission oil for the transmission bearings. 2 stroke oil for the crank bearings and all the other ones just regular bearing grease.

• 
  @lukapintaric63122 ай бұрын

  ​@@Tomology thanks, and for paint did you used any clear coat after painting ?

• 
  @Tomology2 ай бұрын

  @@lukapintaric6312 yes I did

• 
  @nitrorccar99902 ай бұрын

  Wat voor sproeier zit er in?

• 
  @Tomology2 ай бұрын

  Voor de test stationair 50 en hoofdsproeier 105. Het zal met afstellen nog wel veranderen.

• 
  @77fico2 ай бұрын

  Kje si kupil ročko za spraye?

• 
  @Tomology2 ай бұрын

  Online. It is a universal spray paint handle

• 
  @dasadasic2 ай бұрын

  Teško da na zemaljskoj kugli postoji lošiji moto proizvod od Tomosa. Katastrofalan kvalitet materijala ugrađenih u jadnu konstrukciju. Vijci ko da su od maslaca, idiotske dimenzije vijaka npr 7mm, prirubnica auspuha i karburatora se iskrivi jer utonu u debljinu brtve, ležajevi getribe izdrže 2 godine, radilica izdrži 6 mjeseci ili ne više od 5000 km žešće vožnje, klip ko da je od sirovog aluminija, cilindar običan gus bez ikakve termičke obrade, sve je totalni šlamperaj za sirotinjske mase idiotske komunističke Yugoslavije. Među danas kineskim smećem teško da možete naći gori proizvod. Sajle karburatora, kočnica i kvačila teško mogu izdržati godinu dana. Jedino mogu pohvaliti zadnje Saturnusovo svjetlo koje je i nakon više godina zadržalo zdravu crvenu boju i prozirnost, kakve nemate šanse vidjeti na današnjim kineskim motorima. Sve ostalo, šrot. O voznim osobinama, tek to je posebna katastrofa. Je, voljeli smo Tomose prije 40 godina, ali jer nas je komunizam zaglupio i nismo znali za bolje.

• 
  @Tomology2 ай бұрын

  I like them!

• 
  @joergmeinke29562 ай бұрын

  Jörg Meinke kann kein Englisch nur Deutsch habe es vergessen zu sagen.

• 
  @Joschi746Ай бұрын

  Ah okay jörg 😂😂

• 
  @joergmeinke29562 ай бұрын

  Könnten sie mir einen kompletten Thomos flexer 25 kmh verkaufen meiner springt nicht mehr an.an Jörg Meinke 16259 Bad Freienwalde Ebw 37 . für 150/200 € das wäre super

• 
  @Tomology2 ай бұрын

  Nein, tut mir leid

• 
  @nickbrugmans18612 ай бұрын

  Gebruiken deze blokken een schakelhandvat?

• 
  @Tomology2 ай бұрын

  Nee, deze zijn voetgeschakeld!

• 
  @johnkoury11162 ай бұрын

  Super awesome!!! I have to make a 2 into 1 intake for my XS-650 bobber.

• 
  @Tomology2 ай бұрын

  Thanks!

• 
  @johnkoury11162 ай бұрын

  @@Tomology Oh Yeah!!!!

• 
  @Tomology2 ай бұрын

  @@johnkoury1116 Are you going to try casting your manifold?

• 
  @fjgdlud80302 ай бұрын

  Такой уродец просто ужас!!! Страх Божий!!! 😮

• 
  @persepena2 ай бұрын

  How fast it goes? I have same engine and cylinder on my finnish Solifer SM moped and it goes over 100km/h

• 
  @Tomology2 ай бұрын

  I'm not exactly sure, but fast. Cool! They share the same engine, right?

• 
  @Joschi7462 ай бұрын

  Which exhaust can i drove on this cylinder?

• 
  @Tomology2 ай бұрын

  You can install different exhausts which are made for 70cc kits

• 
  @VladicD3 ай бұрын

  L17 bearing are actually better than 6203. But! Installing L17 is very challenging and you need to know how to make appropriate clearance better crank and bearing. This is why your L17 has been destroyed so quickly. I have Tomos 15 slc and it has 23k on the clock, still original L17 bearings. And SLC has 6hp stock.

• 
  @Tomology3 ай бұрын

  It is challenging indeed. I tried multiple times, but I guess I was off. One more drawback is that they cost three times as much as the 6203.

• 
  @VladicD3 ай бұрын

  @@Tomology Yes that is true, but NTN does make drop in one piece replacements for L17. NTN TM-SC03A53C3 is catalog number. Still pretty expensive :D

• 
  @Levi_klomp.20073 ай бұрын

  Welke ralkleuren en merk spuitverf heb je gebruikt

• 
  @Tomology2 ай бұрын

  Voor dit project had ik action spuitbusjes hoogglans wit gebruikt. Het werkt, maar ik raad aan te investeren in wat betere verf ;)

• 
  @mikesbarn18583 ай бұрын

  I suggest that when you install the crankcase seals you should put a small amount of grease between the inner part and crankshaft.

• 
  @Tomology3 ай бұрын

  I use engine oil instead of grease.

• 
  @mikelowrey52753 ай бұрын

  Nice moto

• 
  @mikesbarn18583 ай бұрын

  Wow. What a beautiful build. I love it.

• 
  @Tomology3 ай бұрын

  Thank you!

• 
  @user-bv3nj9od4g3 ай бұрын

  I want to buy something like that, where can I get it?

• 
  @Tomology3 ай бұрын

  You unfortunately can't. It's a custom build project.

• 
  @tomvanalst85333 ай бұрын

  Thank you for providing the Setup info details with fuel consumption. I am interested how you got the transmission to work / shift so smoothly. I noticed the absence of backlash and noise from transmission when backing of the throttle.

• 
  @Tomology3 ай бұрын

  You're welcome. It's a completely stock clutch setup. Only change is that I have shortened the springs.

• 
  @leonardospiranec83603 ай бұрын

  Is this the A5 motor ?

• 
  @Tomology3 ай бұрын

  It is the A35 engine

• 
  @leonardospiranec83603 ай бұрын

  @@Tomology How fast did you get it to go ?

• 
  @leonardospiranec83602 ай бұрын

  I haven't installed my kit on my Tomos yet, but I noticed that it's necessary to expand the intake on the A5 block. I'm wondering why this is necessary and why the kit isn't directly compatible with that block. I thought everything would be simpler and more straightforward, so I'm curious about the reason for this additional adaptation. If you have the time or information about it, please share it with me.