I have them and I go out for a ride and when I get home my wheels are full of dust, I have black wheels and the dust if crazy. I also run EBC crossed drilled and slotted rotors. They stop on a dime but the only negative at least for me is the dust.
@user-fn1nm3pn2y3 күн бұрын
Гарні колодки ! Працюють !
@PeatyR5 күн бұрын
Great vid, full of good info! I just Installed these along with the EBC Gen 3 OEM style rotors on my 2019 Impreza Sport MT. Very nice improvement good pedal feel. Easy swap fitment was perfect.
@EBCBrakesUK2 күн бұрын
That's great to see! Thank you very much for the comment :)
@kilovwdude64576 күн бұрын
How are these videos not getting seen by more people?!
@LoganBallard146 күн бұрын
I feel like my bank account is shrinking every second i watch this vid
@paulsagbakken29966 күн бұрын
Shmee is a girly snobb
@Koenigsegg_edits10306 күн бұрын
I am too broke to even be watching this video😂
@raymondbrett41512 күн бұрын
is there anywhere in Sussex that offers this service
@motavice349917 күн бұрын
I plan on adding these to my daily/ weekend autocross car
@EBCBrakesUK16 күн бұрын
Great stuff! 😎
@khoeunhean451122 күн бұрын
I got a fk8 2020 wat type of rotors and pads do u recommend? I dont track just daily drive and street race once in a while lol
@EBCBrakesUK22 күн бұрын
Hi, either Yellowstuff or Bluestuff would be the best pad option for you. If you have any further questions then drop an email to [email protected] and they can help :)
@redline58923 күн бұрын
How do i bed in these pads on a new rotor for occasional track use? Will I warp the rotors if I heat cycle them on track during bed in? Thanks
@EBCBrakesUK22 күн бұрын
Hi, drop an email to [email protected] and they will be able to assist you with this. Thank you!
@felixfdd4292Ай бұрын
Hey, thanks for the video EBC. So is it normal, that i just installed the brakes bad yellow stuff plus GD Disc and the first drive down a mountain with no to agressive braking i have almost zero braking fully fading and was shocked, as the oeiginal brakes lasts even longer then that. It was even a weird smell in the air from the brakes, thats probably the coating then im right?
@EBCBrakesUK29 күн бұрын
Hi, apologies to hear that you have had this issue. Please drop an email to [email protected] so we can get this resolved for you. Thank you.
@NEVERGIVEUPNEVER69Ай бұрын
Yellow is awesome for audi rs6 v10
@EBCBrakesUKАй бұрын
Thanks for the feedback! That's great to hear!
@hcp8212Ай бұрын
I drive a ford raptor gen 2 on 37s. An off road shop is putting green stuff, should they be going for another color?
@EBCBrakesUKАй бұрын
Hi, Greenstuff should work well - however if you felt you needed a pad with higher friction, you could always try Yellowstuff!
@KygoNkyАй бұрын
For the first time brembo dissapointed me on A4 B9 2.0T 252 stage 1. The 338mm discs and brake pads are getting hot so quick and they cool very hard compared to the golf ones. I'm going to get a yellow brakepads and your brake discs soon. How it can handle more than 2 brakes from 120-160mph like brembo dis
@JamesZ-py1xl2 ай бұрын
Nice i might have to get a set
@DAShanin2 ай бұрын
I agree that the bite on these pads is excellent. I just upgraded from OEM pads on my Audi R8. I'm still seeing a lot of brake dust (after over 100 miles) but its reddish in color. Is this the coating that is wearing off, and once the pads are bedded in wheels will be much cleaner? Thanks in advance for your reply.
@EBCBrakesUK2 ай бұрын
Hi, thanks for the comment. Yes, once the pads have bedded in, there will be much less dust. If you are still having issues with dust after the full bed in process, then drop an email to [email protected] and they will be able to assist. Thank you.
@DAShanin2 ай бұрын
@@EBCBrakesUK thanks for your reply.
@crozwayne2 ай бұрын
what material is the cutting inserts?
@EBCBrakesUK2 ай бұрын
For more info, head over to the Pro-Cut website :)
@mattg7683 ай бұрын
so why is it so difficult to find a set to buy online? i have a mk7.5 golf R, i can find front set but the rear set is impossible to find.. can you provide a link?
@EBCBrakesUK3 ай бұрын
Hi, we don't have Greenstuff available for the Golf R Mk7 as this isn't a suitable compound for the car. We recommend a minimum of Yellowstuff or Bluestuff. Drop an email to [email protected] for more info. Thank you!
@APASSIONFORDETAILING3 ай бұрын
Does anyone know if you csn skim 2 peice dics
@harmjan27033 ай бұрын
hello, do you recommend using orangestuff brake pads on an Audi RS6 for street use? It is driven very sportily on the street. I have tried the yellow pads in the past but that was not a success. And then tried the blue pads and that went better, but not yet 100%. That's why the question is whether you recommend driving with the orange pads. Kind regards
@EBCBrakesUK3 ай бұрын
Hi, thank you for reaching out. It would be best for you to drop an email to [email protected] and they will be able to assist you with this. Thank you.
@quadtraxxx3 ай бұрын
Video starts at 4:13
@user-lz3wv6sk5k3 ай бұрын
I've had good past experience with EBC Yellowstuff on street and for quite a few trackdays at Arizona Motorsports Park in my Fiesta ST (maybe good for 2 weekends, 12 or so 20 min sessions). However, they are inadequate for harder tracks on my fronts. Note that EBC no longer recommends them for track use. At Inde Motorsports Ranch, after puttinh about 5K road miles on Yellowstuffs before the weekend, I was down to the backing after 8 x 20 min sessions (sneaked home metal-on-metal and finished knackering the rotors...). Before this last weekend at Podium Club - a new track with some intense braking - I put on fresh EBC slotted front rotors and the recommended Bluestuff pads. After 6 x 20 min sessions they were down to metal on front inside pads (!!!) I guess next step is to try the RP-1 and if they can't last I guess I need a BBK! BTW, I'm almost box stock with stock power and I wasn't getting any noticeable fade - braking performance was good, just no endurance.
@EBCBrakesUK3 ай бұрын
Hi, if you have had issues with Bluestuff on track then we would recommend that you move up to RP-X. However please note that the RP-Series pads are not road legal. For further information, please drop an email to [email protected]. Thank you.
@user-lz3wv6sk5k3 ай бұрын
@@EBCBrakesUK g'day EBC mates & thx for the reply! You recommend RP-X - how do they compare to RP-1 for Fiesta ST on a hard braking track? The plots show the RP-1's have a pretty even mu over their temp range, not sure I need the mu increase at high temp of the RP-X, and posts I've seen mention the RP-1 last a bit longer - or is that mistaken? Smooth rotors - as consumables! - or slotted? Here in the colonies, it's not a problem to 'sneak' to and from the track on 'street-able' track pads. I had the Bluestuffs on for a week before Podium Club with one gentle canyon run and bedding snubs. I found they are fine on the street for me. It looks like either of the RP-1 or RP-X have good mu when cold so I'd swap 'em on and bed them before weekends. For us the season is about done so I'm putting on some basic Dynamic Friction 600-54075 smooth rotors and a spare set of Yellowstuffs I had on hand. They do fine on our mountain twisties. With the FiST, the adorably tiny rear brakes do fine with Yellowstuffs over multiple track days plus street/canyon use. I'll drop you a note to your email in coming days to continue chatting. Cheers!
@andyp10313 ай бұрын
You got a product code for 2020 Grand Cherokee Summit front and rears? I wanna try these out.
@EBCBrakesUK3 ай бұрын
Hi, drop an email to [email protected] and they can help you with this! We do have Yellowstuff available however there are a couple of options. Thank you!
@ec79453 ай бұрын
Do you guys have a drilled rotor?
@richardbeazer95433 ай бұрын
What a great show and was good to meet up with you 👍🏼 and thanks from my pals for the tickets
@EBCBrakesUK3 ай бұрын
It was great to meet you, Richard!
@MaxCotton3 ай бұрын
Stand looks awesome, keep up the cool content!
@EBCBrakesUK3 ай бұрын
Thanks, Max! 😎😎😎
@bigturboxr3i3 ай бұрын
Yeah but which way round? Groove towards front or groove towards rear?
@EBCBrakesUK3 ай бұрын
Hi, the grooves point towards the front. Thank you.
@coppycatt4 ай бұрын
Is there a way to find the brake calipers for a bmw e36 with m44b19 (1.9 petrol) engine. I tried looking on the website but all i can see is pads and disks. The idea is that i want to upgrade the engine in the future and i want to go with calipers from ebc.
@EBCBrakesUK3 ай бұрын
Hi, if you could please drop an email to [email protected] and they should be able to assist further with this. Thank you.
@kentowers28024 ай бұрын
I have a EBC big brake kit which came with yellow stuff pads (the fronts weren’t coloured but the rear pads were yellow) Would I be better off using RPX blue pads in the front for track?
@EBCBrakesUK4 ай бұрын
Hi, Yellowstuff can handle the occasional track day, if bedded in correctly. However Bluestuff or RPX would perform better on track compared to Yellow. If you have any further questions, please reach out to [email protected]. Thank you.
@restur4 ай бұрын
Hi there! I can't find any information what is in the box with the braided lines? I am looking to buy an EBC kit BLMR3144-2F for my non-abs sv650s , but I can't understand if I will have to buy jumbo bolts and copper seals separately. Also, you say that EBC lines completely repeats the length an scheme of original lines, but my SV 650s has 2 breaks in the front, and only one solid line with a permanent T-joint, which I suppose is not the way you do your lines? Thanks in advance!
@EBCBrakesUK4 ай бұрын
Hi, thank you for the comment! Please drop an email to [email protected] and they should be able to help you with this. Thank you!
@user-fn1nm3pn2y4 ай бұрын
6 лет на ЕВС !
@BAWalks4 ай бұрын
What a beautiful shop
@EBCBrakesUK4 ай бұрын
Thank you! 😎
@tiz9884 ай бұрын
Do you need spacers for the original rims??
@EBCBrakesUK4 ай бұрын
Hi, it depends on which rims as there are a few to choose from. If you follow this link, it will take you to our download page where you can download the Wheel Clearance Templates. Thank you. www.ebcbrakes.com/products/ebc-brakes-racing-downloads/
@tiz9884 ай бұрын
@@EBCBrakesUKgrazie
@sultanf804 ай бұрын
If I installed the front kit, but all of them were on the right side of the two parts, what would happen? Or is there a solution to open the black base and turn it the other way around or do I have to return the wrong piece and have them ship to me on the left side? I need clarification from you on what I can do to save time. my item Fully Floating SG2F Two Piece Rotors for m4 m3 i got it 2 right side
@EBCBrakesUK4 ай бұрын
Hi, we apologise for the issue here. Please reach out to our technical support team and they will be able to help resolve this for you. You can reach them at [email protected] - thank you.
@samherford12984 ай бұрын
Great video! Where are the discs made?
@EBCBrakesUK4 ай бұрын
Hi Sam, Thank you! Our discs are manufactured at our World Headquarters in Northampton!
@plamenpavlov89434 ай бұрын
Greetings from Bulgaria!I am using only EBC pads on my Clios mk 1 and would like to see some results,data about friction coeff(cold,hot),detailed explanation of the letter markings EF,FF,GG,etc on a different pads of yours,thank you.
@EBCBrakesUK4 ай бұрын
Thanks! That's something that we can maybe go over in our next video! If you are keen to get an explanation on that sooner, than drop an email to [email protected] and they will help the best they can :)
@plamenpavlov89434 ай бұрын
@@EBCBrakesUK thank you...I already know about letter marking but I wanted to confirm in particular for Greenstuff and Ultimax
@sexykneedownbiach4 ай бұрын
Really interesting video 👍🏻
@wl19875 ай бұрын
Why do the new yellowstuff EBCs squeal at low speeds after installation on new discs? Will it stop?
@EBCBrakesUK4 ай бұрын
Hi, drop an email to our technical team and they can help with a solution for this. You can reach them at [email protected]. Thank you.
@tiz9885 ай бұрын
Do you need a spacer with those rims?
@m4xripper5 ай бұрын
when will you guys get more stock of Part number 870-S9kR1023 ? iv been waiting almost a year now. I ordered from Jegs and they claim its on back order
@EBCBrakesUK5 ай бұрын
Hi - drop an email to [email protected] and they will be able to clear this up for you. Thank you.
@m4xripper5 ай бұрын
Ordered there slotted brake kit with yellow stuff pads from Jegs and have been on back order since Jun of 2023 and claim you guys cant keep up with the strong demand? is this true
@EBCBrakesUK5 ай бұрын
Hi - drop an email to [email protected] and they will be able to clear this up for you. Thank you.
@amp66495 ай бұрын
With the square style bobbins being superior to the round variety, Is there something to the vintage style rotor design which requires it to use the round style bobbins?
@EBCBrakesUK5 ай бұрын
Hi, thanks for the comment! Drop an email to [email protected] and they can answer this for you :)
@poosh65295 ай бұрын
Hi, is this kit also compatible with the ST150?
@EBCBrakesUK5 ай бұрын
We do have a Big Brake Kit for the ST150! The part number is BBK010***-1. If you need anymore information on this kit then please reach out to [email protected]. If you are interested in purchasing a kit then please visit www.ebcbrakes.com/where-to-buy/ - thank you!
@poosh65295 ай бұрын
@@EBCBrakesUK Thank you!
@MalZonCossie5 ай бұрын
Is the Redstuff a downgrade from Yellowstuff? Got Yellowstuff today and want less dust. I go 95% street but some trackdays also.
@EBCBrakesUK5 ай бұрын
Hi, Redstuff does have a lower friction coefficient compared to the Yellowstuff so in terms of performance during spirited driving, Yellowstuff would be better. However, like mentioned in the video, Redstuff is a low dust pad. We do advise against using our Redstuff pad on the track. Thank you.
@vibingwithvinyl5 ай бұрын
I just ordered a set of these for my Nissan Maxima, along with Mtec brake rotors.
@lastpally5 ай бұрын
Will the red stuff pads be recommended for a bmw m340i with the larger rotors package? Car is stock with 382hp. I do not track my car but do spirited driving occasionally. I’m focus on reduce rotor wear, low dust but increase braking performance. I live in a hot climate (South Florida).
@EBCBrakesUK5 ай бұрын
Hi! We would definitely recommend that you go for a higher performance pad, our Yellowstuff or Bluestuff pad would work much better.
@lastpally5 ай бұрын
@@EBCBrakesUK thank you. But I cannot find the part number for the yellow stuff pads for the 374mm front rotor option. I went with red stuff front and rear. I should be fine for general driving?
@Prawnleem5 ай бұрын
still salty i didn't win this :D proper nice build
@804MRMAN5 ай бұрын
Wait wait, was the test for the pads, brake caliper, or both lol?
@EBCBrakesUK5 ай бұрын
Hi, the purpose of this test was the evaluate the pads, however our dyno capability allows us to also test caliper and disc/rotor setups as well!
Пікірлер
I have them and I go out for a ride and when I get home my wheels are full of dust, I have black wheels and the dust if crazy. I also run EBC crossed drilled and slotted rotors. They stop on a dime but the only negative at least for me is the dust.
Гарні колодки ! Працюють !
Great vid, full of good info! I just Installed these along with the EBC Gen 3 OEM style rotors on my 2019 Impreza Sport MT. Very nice improvement good pedal feel. Easy swap fitment was perfect.
That's great to see! Thank you very much for the comment :)
How are these videos not getting seen by more people?!
I feel like my bank account is shrinking every second i watch this vid
Shmee is a girly snobb
I am too broke to even be watching this video😂
is there anywhere in Sussex that offers this service
I plan on adding these to my daily/ weekend autocross car
Great stuff! 😎
I got a fk8 2020 wat type of rotors and pads do u recommend? I dont track just daily drive and street race once in a while lol
Hi, either Yellowstuff or Bluestuff would be the best pad option for you. If you have any further questions then drop an email to [email protected] and they can help :)
How do i bed in these pads on a new rotor for occasional track use? Will I warp the rotors if I heat cycle them on track during bed in? Thanks
Hi, drop an email to [email protected] and they will be able to assist you with this. Thank you!
Hey, thanks for the video EBC. So is it normal, that i just installed the brakes bad yellow stuff plus GD Disc and the first drive down a mountain with no to agressive braking i have almost zero braking fully fading and was shocked, as the oeiginal brakes lasts even longer then that. It was even a weird smell in the air from the brakes, thats probably the coating then im right?
Hi, apologies to hear that you have had this issue. Please drop an email to [email protected] so we can get this resolved for you. Thank you.
Yellow is awesome for audi rs6 v10
Thanks for the feedback! That's great to hear!
I drive a ford raptor gen 2 on 37s. An off road shop is putting green stuff, should they be going for another color?
Hi, Greenstuff should work well - however if you felt you needed a pad with higher friction, you could always try Yellowstuff!
For the first time brembo dissapointed me on A4 B9 2.0T 252 stage 1. The 338mm discs and brake pads are getting hot so quick and they cool very hard compared to the golf ones. I'm going to get a yellow brakepads and your brake discs soon. How it can handle more than 2 brakes from 120-160mph like brembo dis
Nice i might have to get a set
I agree that the bite on these pads is excellent. I just upgraded from OEM pads on my Audi R8. I'm still seeing a lot of brake dust (after over 100 miles) but its reddish in color. Is this the coating that is wearing off, and once the pads are bedded in wheels will be much cleaner? Thanks in advance for your reply.
Hi, thanks for the comment. Yes, once the pads have bedded in, there will be much less dust. If you are still having issues with dust after the full bed in process, then drop an email to [email protected] and they will be able to assist. Thank you.
@@EBCBrakesUK thanks for your reply.
what material is the cutting inserts?
For more info, head over to the Pro-Cut website :)
so why is it so difficult to find a set to buy online? i have a mk7.5 golf R, i can find front set but the rear set is impossible to find.. can you provide a link?
Hi, we don't have Greenstuff available for the Golf R Mk7 as this isn't a suitable compound for the car. We recommend a minimum of Yellowstuff or Bluestuff. Drop an email to [email protected] for more info. Thank you!
Does anyone know if you csn skim 2 peice dics
hello, do you recommend using orangestuff brake pads on an Audi RS6 for street use? It is driven very sportily on the street. I have tried the yellow pads in the past but that was not a success. And then tried the blue pads and that went better, but not yet 100%. That's why the question is whether you recommend driving with the orange pads. Kind regards
Hi, thank you for reaching out. It would be best for you to drop an email to [email protected] and they will be able to assist you with this. Thank you.
Video starts at 4:13
I've had good past experience with EBC Yellowstuff on street and for quite a few trackdays at Arizona Motorsports Park in my Fiesta ST (maybe good for 2 weekends, 12 or so 20 min sessions). However, they are inadequate for harder tracks on my fronts. Note that EBC no longer recommends them for track use. At Inde Motorsports Ranch, after puttinh about 5K road miles on Yellowstuffs before the weekend, I was down to the backing after 8 x 20 min sessions (sneaked home metal-on-metal and finished knackering the rotors...). Before this last weekend at Podium Club - a new track with some intense braking - I put on fresh EBC slotted front rotors and the recommended Bluestuff pads. After 6 x 20 min sessions they were down to metal on front inside pads (!!!) I guess next step is to try the RP-1 and if they can't last I guess I need a BBK! BTW, I'm almost box stock with stock power and I wasn't getting any noticeable fade - braking performance was good, just no endurance.
Hi, if you have had issues with Bluestuff on track then we would recommend that you move up to RP-X. However please note that the RP-Series pads are not road legal. For further information, please drop an email to [email protected]. Thank you.
@@EBCBrakesUK g'day EBC mates & thx for the reply! You recommend RP-X - how do they compare to RP-1 for Fiesta ST on a hard braking track? The plots show the RP-1's have a pretty even mu over their temp range, not sure I need the mu increase at high temp of the RP-X, and posts I've seen mention the RP-1 last a bit longer - or is that mistaken? Smooth rotors - as consumables! - or slotted? Here in the colonies, it's not a problem to 'sneak' to and from the track on 'street-able' track pads. I had the Bluestuffs on for a week before Podium Club with one gentle canyon run and bedding snubs. I found they are fine on the street for me. It looks like either of the RP-1 or RP-X have good mu when cold so I'd swap 'em on and bed them before weekends. For us the season is about done so I'm putting on some basic Dynamic Friction 600-54075 smooth rotors and a spare set of Yellowstuffs I had on hand. They do fine on our mountain twisties. With the FiST, the adorably tiny rear brakes do fine with Yellowstuffs over multiple track days plus street/canyon use. I'll drop you a note to your email in coming days to continue chatting. Cheers!
You got a product code for 2020 Grand Cherokee Summit front and rears? I wanna try these out.
Hi, drop an email to [email protected] and they can help you with this! We do have Yellowstuff available however there are a couple of options. Thank you!
Do you guys have a drilled rotor?
What a great show and was good to meet up with you 👍🏼 and thanks from my pals for the tickets
It was great to meet you, Richard!
Stand looks awesome, keep up the cool content!
Thanks, Max! 😎😎😎
Yeah but which way round? Groove towards front or groove towards rear?
Hi, the grooves point towards the front. Thank you.
Is there a way to find the brake calipers for a bmw e36 with m44b19 (1.9 petrol) engine. I tried looking on the website but all i can see is pads and disks. The idea is that i want to upgrade the engine in the future and i want to go with calipers from ebc.
Hi, if you could please drop an email to [email protected] and they should be able to assist further with this. Thank you.
I have a EBC big brake kit which came with yellow stuff pads (the fronts weren’t coloured but the rear pads were yellow) Would I be better off using RPX blue pads in the front for track?
Hi, Yellowstuff can handle the occasional track day, if bedded in correctly. However Bluestuff or RPX would perform better on track compared to Yellow. If you have any further questions, please reach out to [email protected]. Thank you.
Hi there! I can't find any information what is in the box with the braided lines? I am looking to buy an EBC kit BLMR3144-2F for my non-abs sv650s , but I can't understand if I will have to buy jumbo bolts and copper seals separately. Also, you say that EBC lines completely repeats the length an scheme of original lines, but my SV 650s has 2 breaks in the front, and only one solid line with a permanent T-joint, which I suppose is not the way you do your lines? Thanks in advance!
Hi, thank you for the comment! Please drop an email to [email protected] and they should be able to help you with this. Thank you!
6 лет на ЕВС !
What a beautiful shop
Thank you! 😎
Do you need spacers for the original rims??
Hi, it depends on which rims as there are a few to choose from. If you follow this link, it will take you to our download page where you can download the Wheel Clearance Templates. Thank you. www.ebcbrakes.com/products/ebc-brakes-racing-downloads/
@@EBCBrakesUKgrazie
If I installed the front kit, but all of them were on the right side of the two parts, what would happen? Or is there a solution to open the black base and turn it the other way around or do I have to return the wrong piece and have them ship to me on the left side? I need clarification from you on what I can do to save time. my item Fully Floating SG2F Two Piece Rotors for m4 m3 i got it 2 right side
Hi, we apologise for the issue here. Please reach out to our technical support team and they will be able to help resolve this for you. You can reach them at [email protected] - thank you.
Great video! Where are the discs made?
Hi Sam, Thank you! Our discs are manufactured at our World Headquarters in Northampton!
Greetings from Bulgaria!I am using only EBC pads on my Clios mk 1 and would like to see some results,data about friction coeff(cold,hot),detailed explanation of the letter markings EF,FF,GG,etc on a different pads of yours,thank you.
Thanks! That's something that we can maybe go over in our next video! If you are keen to get an explanation on that sooner, than drop an email to [email protected] and they will help the best they can :)
@@EBCBrakesUK thank you...I already know about letter marking but I wanted to confirm in particular for Greenstuff and Ultimax
Really interesting video 👍🏻
Why do the new yellowstuff EBCs squeal at low speeds after installation on new discs? Will it stop?
Hi, drop an email to our technical team and they can help with a solution for this. You can reach them at [email protected]. Thank you.
Do you need a spacer with those rims?
when will you guys get more stock of Part number 870-S9kR1023 ? iv been waiting almost a year now. I ordered from Jegs and they claim its on back order
Hi - drop an email to [email protected] and they will be able to clear this up for you. Thank you.
Ordered there slotted brake kit with yellow stuff pads from Jegs and have been on back order since Jun of 2023 and claim you guys cant keep up with the strong demand? is this true
Hi - drop an email to [email protected] and they will be able to clear this up for you. Thank you.
With the square style bobbins being superior to the round variety, Is there something to the vintage style rotor design which requires it to use the round style bobbins?
Hi, thanks for the comment! Drop an email to [email protected] and they can answer this for you :)
Hi, is this kit also compatible with the ST150?
We do have a Big Brake Kit for the ST150! The part number is BBK010***-1. If you need anymore information on this kit then please reach out to [email protected]. If you are interested in purchasing a kit then please visit www.ebcbrakes.com/where-to-buy/ - thank you!
@@EBCBrakesUK Thank you!
Is the Redstuff a downgrade from Yellowstuff? Got Yellowstuff today and want less dust. I go 95% street but some trackdays also.
Hi, Redstuff does have a lower friction coefficient compared to the Yellowstuff so in terms of performance during spirited driving, Yellowstuff would be better. However, like mentioned in the video, Redstuff is a low dust pad. We do advise against using our Redstuff pad on the track. Thank you.
I just ordered a set of these for my Nissan Maxima, along with Mtec brake rotors.
Will the red stuff pads be recommended for a bmw m340i with the larger rotors package? Car is stock with 382hp. I do not track my car but do spirited driving occasionally. I’m focus on reduce rotor wear, low dust but increase braking performance. I live in a hot climate (South Florida).
Hi! We would definitely recommend that you go for a higher performance pad, our Yellowstuff or Bluestuff pad would work much better.
@@EBCBrakesUK thank you. But I cannot find the part number for the yellow stuff pads for the 374mm front rotor option. I went with red stuff front and rear. I should be fine for general driving?
still salty i didn't win this :D proper nice build
Wait wait, was the test for the pads, brake caliper, or both lol?
Hi, the purpose of this test was the evaluate the pads, however our dyno capability allows us to also test caliper and disc/rotor setups as well!
🔥 'promosm'