Пікірлер

• 
  @shawnclementsitorus34908 күн бұрын

  Nice

• 
  @chillios222211 күн бұрын

  using these for my kayak

• 
  @cgolf10011 күн бұрын

  @@chillios2222 great idea. I will have to try them there too. I like that they are more water resistant than those KVD plastics bags. Thanks for watching.

• 
  @EarthlingEDC14 күн бұрын

  Nice! I like what you did with the elastics! Thanks for the plug 😊

• 
  @mfinresearch646216 күн бұрын

  I am going to have to get one of these little cards one day. I had my eye on them for a minute. First, to find a few people with 3D printers....or to buy one myself.

• 
  @cgolf10015 күн бұрын

  @@mfinresearch6462 I really like using them. I believe that I currently have 5 between my sling and laptop bag. I would love a 3d printer, but I just don’t think I would have time to use it enough to justify the cost.

• 
  @scratchbuiltreplicas82421 күн бұрын

  LOVE THE BAG! I CARRY THE 7 LITER OR 7.7 IN ALL BLACK. I ALSO LOVE THE KITTY CALENDER. FELLOW CAT LOVER AND ONWER.

• 
  @EarthlingEDC21 күн бұрын

  Nice build🎉 thanks for the plug 👍👍

• 
  @L0neB0yzF03v3rАй бұрын

  Damn and the cup landed

• 
  @cgolf100Ай бұрын

  Nice catch I didn't even notice that!

• 
  @itimmy101Ай бұрын

  If you have an "R.E.I. co-op" store near ya, I'd recommend adding at least 2 "fatty" beef stix. Its By far the best jerky with none of the bad ingredients!

• 
  @cgolf100Ай бұрын

  @@itimmy101 Great idea. Beef sticks and jerky are our meal replacement choice for long car trips or flights. We do have an REI pretty close to us. Thanks for watching.

• 
  @itimmy101Ай бұрын

  @@cgolf100 nice, no problem!😃👍

• 
  @zexnynex777Ай бұрын

  Dont feel bad, this just took 50$ away from my Nightforce 1-8 money. It was in stock and i couldnt help myself 😂

• 
  @andreamassari3849Ай бұрын

  The sound was great. Love the onange and Blue TomToc sling. I'd be curious to see if sling bags from Temu were like. I just got a mini messenger bag from them and it's great quality and thick canvas.

• 
  @mfinresearch6462Ай бұрын

  So I could’ve sworn I made a comment. Don’t know what happened to it. Thanks for putting it out. The list is better than I expected. It’s funny, we have a lot of the same stuff on our list. Despite how hard it is to get sometimes I will vouch for the garage built gear Mighty pouch is my favorite pouch right now.

• 
  @cgolf100Ай бұрын

  I will look into the garage built stuff some more. He has some larger pouches that look incredible. I went with the AGP because it was different than most, and the drop I got mine on sold out in less than 2 minutes, crazy how fast that stuff moves. I don’t mind paying more for different and quality.

• 
  @KipiszАй бұрын

  I ordered the same reel and i saw some bad reviews about it. I hope it will be good

• 
  @cgolf100Ай бұрын

  I grabbed 2 more based on the one outing before they disappeared. Will be getting them on the water this weekend. Thanks for watching and hope it works well for you.

• 
  @xavier7566Ай бұрын

  @@cgolf100how were they?

• 
  @cgolf100Ай бұрын

  @@xavier7566 2nd trip for the first reel I purchased and there is not a lot of adjustment on the drag, which isn’t all that unusual on a BC but less adjustment then my Lews crush. I did have the line get off the spool and wrap around causing a mess. I looked for a side plate release and couldn’t find one and made a bigger line mess. Finally found there is no release switch just held by magnets. Good to know for future. So basically it’s a smooth reel for now that catches fish, but the tolerances are a little loose on it. For around 15 bucks a good reel, not replacing my better stuff though. Don’t hate them though.

• 
  @mfinresearch64622 ай бұрын

  I liked listening to your perspective. I'm always trying to find the best intersection between use and dollar amount, and I try to identify a use before I buy most things. I don't know if you have already but have you done a video on the chart? I'm wondering what's on there in the entire video.

• 
  @cgolf1002 ай бұрын

  The fun but tough thing is trying to figure out what products you need to spend more on to get something usable, adjustable wrench comes to mind, and what is trendy. For fishing I have this figured out, it’s the pouches, knives, and slings where I am learning. I will do a video soon on the chart, and then how I cut it down to my gift idea list so I can do some more content. Glad you liked the video, it was a fun one to do.

• 
  @Bob-I-am2 ай бұрын

  it's good to see an EDC item actually put to use. Thanks for the video.

• 
  @Knivesarelife3 ай бұрын

  There alot of great deals on knife now a days sir just shop around and use people codes to many bags use what u have be yourself my code i try is any KZreader name.and 15 if they work i use them have goodday sir

• 
  @cgolf1003 ай бұрын

  I will do that. First I need to figure out if D2 blade steel fits my needs or do I need a better steel. Also try to figure out if brands like Civivi are legit or if they are just good at generating KZread hype. I have carried pocket knives all my life, but I never dug into the topic. Just figured that a Buck knife was decent enough.

• 
  @Castleknight3 ай бұрын

  It would help if you could boost your volume. You are soft spoken and one really has to really turn up the volume.

• 
  @cgolf1003 ай бұрын

  I noticed that too, listening to it to make sure it was ok. I will do a sound check next time,. Not sure if the microphone was partially covered or what happened. Thanks for the feedback and watching. I realize what is happening, as I went from behind the phone to in front of the phone now, I am further from the microphone. I will work either on speaking up or figuring out a microphone to help out.

• 
  @andreamassari38493 ай бұрын

  You make a lot of valid points. The price of EDC gear has gone through the roof. The knife makers have definitely lost their minds charging over $200 usd for D2 steel blades. I'd like to see what budget knives you have. I enjoyed your Temu haul video. I like looking at options and budget options certainly have their place in EDC.

• 
  @cgolf1003 ай бұрын

  I do have two Ozark Trail knife videos, and in the most recent one the Gordon knife is in there as well. One nice thing about the two Gordon knives is when I close them the blade tip on both is dead center in the frame. My older and more expensive Kershaw isn’t close to centered. Thanks for watching

• 
  @scratchbuiltreplicas8243 ай бұрын

  Cool bag! I here a kitty! I love cats!

• 
  @Castleknight3 ай бұрын

  I wonder if the TomToc will suffer crunches on the front and back like this one does.

• 
  @cgolf1003 ай бұрын

  I think most packs will. I think most like the Tomtoc and Peak Design are also soft sided. Are you looking for a more rigid case?

• 
  @Castleknight4 ай бұрын

  May get the cheap heat shrink tubing too, for my pocket racks.

• 
  @Castleknight4 ай бұрын

  I like the cheaper "hero clips". I have a few and they're pricey. May pick up the cheaper version, as I'm not lifting anything heavy with them anyway.

• 
  @Rick-fz7tt4 ай бұрын

  Looks like China is making money off someone.🤔

• 
  @cgolf1004 ай бұрын

  Unfortunately most if not of us. Even places that assemble products will source parts from overseas. With the global economy, companies didn’t waste time shipping the work overseas or South. My last two trucks were built in the US, assumed the third would be, nope Mexico. I don’t think the last few years with supply chain issues taught companies anything either.

• 
  @Castleknight4 ай бұрын

  No more than they cost, I got both brands.

• 
  @cgolf1004 ай бұрын

  I wish the outdoor edge was cheaper. The price on the Hart is a crazy good deal.

• 
  @gitz-zum4 ай бұрын

  U need to crank the reel a half spin to 3/4 Spin as u pull the rod all in 1 motion.,..it pulls the slack just right and pulls and stops the jerkbait also all just right

• 
  @TurkishKS4 ай бұрын

  Nice video. I've been really wanting to get my hands on a pocket rack, and the KZread algorithm must've picked up on that and recommended your video. I'm glad it did. You showed lots of great options for how to carry gear and what to carry, and I'll definitely be stealing a few ideas, haha. Well done. 👍👍

• 
  @cgolf1004 ай бұрын

  Thank you for watching and glad you enjoyed the video. When you get your pocket card setup share some pictures with EarthlingEDC for the community page.

• 
  @Castleknight4 ай бұрын

  Where did you get the pocket rack with the anchors in the middle? Is there a link to the 3D print file?

• 
  @cgolf1004 ай бұрын

  Here is a link to Thingverse from the EarthlingEDC community page. For his videos he includes a pdf with links. www.thingiverse.com/thing:6452942/files

• 
  @Castleknight4 ай бұрын

  Where did you get that real thin card/container thing?

• 
  @cgolf1004 ай бұрын

  I borrowed them from my wife. She said they are usually around the gift card area in a store. Probably easier to find around the holidays.

• 
  @Castleknight4 ай бұрын

  I'll keep an eye out for one. @@cgolf100

• 
  @Castleknight4 ай бұрын

  What size shrink tubing are you using?

• 
  @cgolf1004 ай бұрын

  Looking on the Harbor Freight website it should be 9/32. I appear to have misplaced my box.

• 
  @Castleknight4 ай бұрын

  So a tad larger than a 1/4"@@cgolf100

• 
  @Castleknight4 ай бұрын

  Did you say you were using hairbands? Are there multiple sizes? What size are you using?

• 
  @cgolf1004 ай бұрын

  I have been using the Goody Kids part number 09427 and Scunci part number 33815 and those have worked well for me and both seem to be the same size. If I need something smaller I have used the ponytail rubber bands, similar to the ones used with braces, but double those up and hold the two together with a small zip tie. If you happen to fish those small rubber bands work great to hold treble hooks together when storing crank baits so that you can remove them easily from a box. Also check out the earthlingedc channel for more ideas for hold downs. Thanks for watching.

• 
  @unitedstatesirie74314 ай бұрын

  I think that if you use a water-jet cutter or laser to cut the aluminum into shape it would be more efficient and effortless.

• 
  @lesliepaulkovacs64424 ай бұрын

  Good thing he’s got those Machines in the Garage like most people do.🙄

• 
  @Quevision5 ай бұрын

  Liked the video what is a card case you using and is it rfid?

• 
  @cgolf1005 ай бұрын

  None of the pouches are RFID unfortunately. The first orange pouch is a Viperade VE10. The first aid pouch was a coin purse or wallet from Temu. We generally buy the RFID sleeves for our cards. Thanks for watching.

• 
  @enriquediaz75475 ай бұрын

  One thing I’m recently adding is a “dump pouch”. It can be MOLLE attached & serves for trash, awkward items, supplies, or the extra tools we inevitably take or need (hammer, cordless screwdriver, etc). It can also be attached to a belt.

• 
  @justingrady15025 ай бұрын

  You do have a wire cutter on the vice grips

• 
  @cgolf1005 ай бұрын

  Thank you for pointing that out. I have used vise grips for years, and have never noticed that.

• 
  @Viperadeedc5 ай бұрын

  Nice video

• 
  @cgolf1005 ай бұрын

  Thank you. Keep the awesome pouches coming. Will eventually get my hands on the VE 30 and VE 31. Love the vertical and horizontal storage options in the VE30.

• 
  @Viperadeedc5 ай бұрын

  @@cgolf100 will do. Thank you for your support🙌

• 
  @michaelnasser86975 ай бұрын

  That sir, is a very well thought out tool kit, well done! Also, it’s nice seeing a “common man” set up, instead of the “tacticool” set ups.

• 
  @jozefjustjozef7865 ай бұрын

  Hi. A bunch o youtubers have shown their EDC or done reviews on this pouch but you are the only one that took these measurements. Thank you for that. I have my on its way but thanks to your video I realized it won't fit my tolls the way I imagine. Too bad I haven't seen it earlier. :)

• 
  @cgolf1005 ай бұрын

  That’s a bummer, but hopefully you find a way to make it work. It is a pretty versatile pouch. Thanks for watching.

• 
  @jozefjustjozef7865 ай бұрын

  @@cgolf100Ou, I am sure I will figure something out :) ... It is only that one, very specific setup, I had in mind won't work. The thin long most left channel was meant for a pry bar that is a perfect length but 20mm wide and judging from your measurements, that won't fit. Anyway - thanks for your detailed measurements.

• 
  @egbluesuede12206 ай бұрын

  I got one thru Amazon this week and going to send it back. I paid $10 and I agree about that spring being a likely failure point. Plus it doesn't make the blade deployment feel good. It so clunky, I sometimes need both hands to hold it and deploy it. You have to jerk it around a little in the track with that spring to get it to slide out. I really wanted to like it, but not for $10.

• 
  @cgolf1006 ай бұрын

  You may want to look at the Hart from Walmart. The 2 pack is under 9 dollars and it locks in 2 open positions. Only real complaint with it was the blade release button was hard to press, but minor inconvenience on a feature not used often. Thanks for watching.

• 
  @athomehack77896 ай бұрын

  Nice find @ an outlet mall! (Canada?) Looks like you’re a “righty” w/ right shoulder damage. Suggestions: -“Reverse” the pocket clip, (tip up) vs how it came. Now use your pinky & next 2 fingers “to hold” the body/handle when you push the button to deploy. -Maybe use a T-8 torx on the pivot just a tiny bit to free it up, if it’s not breaking in. Hope this helps. Keep on making vids! Fastback is still my go to, Ryobi is a great backup. (from the gentleman who had a hard time finding info about this utility knife ; )

• 
  @billyhoward46806 ай бұрын

  'promo sm'

• 
  @Viperadeedc7 ай бұрын

  Nice video🎉👍🙌

• 
  @ReplayFan5627 ай бұрын

  Thanks for sharing and measuring. I also like orange, easier to locate / see it. Take care

• 
  @cgolf1007 ай бұрын

  Thanks for watching and the feedback. I will work on incorporating some more measurements in future pouch reviews. If you want measurements on any I have done so far, let me know and I will do some videos in the future.

• 
  @scratchbuiltreplicas8247 ай бұрын

  This is cool! Do you carry this in your pants pocket?

• 
  @cgolf1007 ай бұрын

  I carry it in my backpack or sling bag I take to work. This one is a little too wide when loaded out. Viperade and other brands have thinner ones that would fit in a pocket. Just nice to have gear organized so I don’t need to dig through a pocket in my backpack. I have a couple of videos with thinner options that are pocket carry friendly.

• 
  @scratchbuiltreplicas8247 ай бұрын

  @@cgolf100 awesome. Thanks

• 
  @Rick-fz7tt7 ай бұрын

  Looks like a real mess.😂😂

• 
  @bhclardy17 ай бұрын

  how would you compare to the maxpedition series?

• 
  @cgolf1007 ай бұрын

  Good question. I currently only have one Maxpedition pouch, Fatty, but just got it and haven't packed it out yet. It does have the same layout as the all good pouch but is much larger. As for quality, both seem well made, I do like the small amount of padding in the all good pouch and the zippered pocket on the inside, don't believe the smaller Maxpedition pouches have that option. I have a few viperade pouches that I like, but I would say the all good pouch is better quality, but not sure it is double the price better. This pouch fit a need for me, and I might buy another. What I have seen from viperade and the Maxpedition pouch, I have no issue buying those either. I probably didn't answer your question well, but since I generally lean toward budget friendly gear it is difficult for me to say it is that much better.

• 
  @smirkingdevil7 ай бұрын

  The cut down BIC pen is genius!

• 
  @ToolTechGeek7 ай бұрын

  That is the perfect size.

• 
  @Stane4057 ай бұрын

  The red multi tool is the Next tool mini flagship not the mini sailor