Пікірлер

• 
  @PatrikJVS7 күн бұрын

  I have Brigss and Stratton pressure washer what adapter do I need to connect it

• 
  @wheelerdetailers5 күн бұрын

  Hi Patrik, pls send photo of the connection part to [email protected] and we try to help you with the correct one

• 
  @1702jtma9 күн бұрын

  Do you know what I should by to be able to apply foam 8-10 meters up?

• 
  @wheelerdetailers9 күн бұрын

  Pls email [email protected] and we'll help with what you need

• 
  @sohailchabba893710 күн бұрын

  Hey does that zip tie stops any light? I mean small patch? And does this heat up? Asking because zip toes is touching lights

• 
  @wheelerdetailers9 күн бұрын

  Good question, It doesnt heat up.

• 
  @Martin944turbo11 күн бұрын

  I am buying wheels next week and they are Porsche Hartmann eta beta wheels. What's the difference between Hartmann and just eta beta wheels? Great video. Thanks.

• 
  @wheelerdetailers5 күн бұрын

  Hi Martin, good question, tbh these wheels are from our colleague Chris, he knows all about 80s / 90s Porsche, feel free to email him [email protected]

• 
  @wheelerdetailers11 күн бұрын

  We hope this video helps you installing the hexagon led light right. If you do have a question dont hesitate to ask, call or email our customer service #foreverdetailing

• 
  @clints888811 күн бұрын

  It just means these towels are crap if they don't say the gsm

• 
  @clints888812 күн бұрын

  Typical chemical guys no GSM mentioned

• 
  @wheelerdetailers12 күн бұрын

  D Con does :-) www.carcare24.eu/en/d-con-happy-end-edgeless-microfiber-towel-red-40-x-40-cm.html

• 
  @wheelerdetailers14 күн бұрын

  For more information on how to use D-CON ORANGE ECO WATERLESS WASH CONCENTRATE, how to dilute it, as well as all its different uses klick the link to watch the video now kzread.info/dash/bejne/goaV3Jh_lNred6Q.html Should you have any questions about polishers, which pads are best suited to your needs, or which compounds to use, etc, feel free to leave a comment below or to contact us on +31-(0)546-456716 or via the chat function on our website. Thank you for watching and we'll see you in the next one! Bye bye! 🙋🏻🚙

• 
  @damirgrgic739215 күн бұрын

  What are you doing! this is not a snow foam, it should be diluted 1:50 max! this is only the sealant i use 10 ml in 500 ml water

• 
  @wheelerdetailers5 күн бұрын

  You can do both according to the label on the bottle

• 
  @KaHaDa_life18 күн бұрын

  I have been using CG products a lot but now I have a car which has. 3M on the hood, I wonder if it can be used on 3M

• 
  @wheelerdetailers15 күн бұрын

  Can you pls specify the product you have now from 3M

• 
  @KaHaDa_life14 күн бұрын

  @@wheelerdetailers that's the thing it's some kind of a film but I don't know which one, we would just generally refer to it as 3M

• 
  @wheelerdetailers11 күн бұрын

  @@KaHaDa_life when you have the type pls email us then we can look into what could work for you

• 
  @tombeemsterboer859123 күн бұрын

  Does it only work on unprotected surfaces or can I also use it on top of a wax or sealant?

• 
  @wheelerdetailers22 күн бұрын

  D Con Lightning Wet Coat will perform the best on a wet and unprotected surface.

• 
  @JorrC86Ай бұрын

  Why wear that green microfiber thing if the hose of the vacuum scratches the side of the car?

• 
  @wheelerdetailersАй бұрын

  The apron prevents getting getting dirt on the shirt as well as it helps to be soft when working towards and around the car.

• 
  @AxiotimoАй бұрын

  Cut just before you were about to mark or scratch the trim and paintwork with the edge of the vacuum cleaner; 12:55

• 
  @wheelerdetailersАй бұрын

  Good mentioning :-) we're are not perfect, better is to mask it with tape before doing the work.

• 
  @mariostephan263Ай бұрын

  Wenn du richtige Produkte hättest dann müsstet du nur 1x reinigen. 😂

• 
  @wheelerdetailersАй бұрын

  There are more ways that lead to Rome :-)

• 
  @wheelerdetailersАй бұрын

  Have you tested our latest product? Let us know what you think about it down below. Thanks for watching, we'll see you on the next one!

• 
  @wheelerdetailersАй бұрын

  If you have any questions about cleaning a convertible top feel free to leave them down below or contact us on +31-(0)546-456716 sending an email to [email protected] or using the whatsapp or web app chat function on our website. Thank you for watching and we'll see you, on the next one!

• 
  @danmcgee4734Ай бұрын

  Please dont (rinse) pressure wash off dry sand. Its basically sand blasting your paint. Best practice is low pressure rinse then snow foam or even with snow foam on dry paint would be better than blasting sand particles across the clear coat.

• 
  @wheelerdetailers5 күн бұрын

  There are more ways that lead to Rome, and as we could have seen in this snow foam was a lot of sand emulsified as intended to do a safe and efficient pre wash.

• 
  @NeilSnapePhotographyАй бұрын

  Funny you said check the weather. I finished washing our two cars after the last episode of Saraha sand, and the one that was left outside was again dosed with sand a day later!

• 
  @KerleemАй бұрын

  Great video! I always hate the Sahara sand that gets on my car and cannot wait to wash it

• 
  @iVinxАй бұрын

  Is snow foam used only as a prewash, or can be used only as main wash? Will it clean it good?

• 
  @wheelerdetailersАй бұрын

  Its a pre wash, designed to lift and emulsify onlying dirt. After this process the washing process goes much more safe and efficient.

• 
  @iVinxАй бұрын

  Is Snow foam enough to clean car completely, or is it necessary to wash and clean it one more time with sponge to scrub all dirt? (with exception the front part with insects)

• 
  @wheelerdetailersАй бұрын

  Its a pre wash, designed to lift and emulsify onlying dirt. After this process the washing process goes much more safe and efficient.

• 
  @wheelerdetailersАй бұрын

  If you have any questions about the process or the products we used, feel free to drop them down below. Thank you for watching, We'll see you on the next one!

• 
  @terryroxburgh3276Ай бұрын

  Much more cleaning product and effort used on the section that the rotary brush was used on. Not a fair comparison.

• 
  @wheelerdetailers5 күн бұрын

  I spend 4,5 hours on this convertible top, I tried to do it as equal as possible, not sure how you come to your conclusion. On a few hard stains I had to do some extra work, also with the hand brush, there where it was needed. But in general it was done as equal as could be done.

• 
  @jandof7781Ай бұрын

  awesome !!

• 
  @ZEV79Ай бұрын

  Thank you for this video, a suggestion should be a installation on this led light system, cheers from a swiss dude

• 
  @wheelerdetailersАй бұрын

  Thank you for mentioning, good idea. Next one that we will install we will film it and make a 2nd video.

• 
  @jordy7057Ай бұрын

  👋🏻

• 
  @kingstealthblade7304Ай бұрын

  Hi I have a Vax VPW1 Pressure Washer what connection will I need?

• 
  @wheelerdetailersАй бұрын

  Pls email a photo of the connection part of your lance to [email protected] and we will help you

• 
  @wheelerdetailersАй бұрын

  Hi there guys and girls. Say hello to the *D-Con Hexagon Hexagrid Honeycomb LED Light System* . It's the perfect light to illuminate your detail studio, workshop or garage while also giving it a professional look. Let us know what you think about this lighting system in the comments down below, and we'll see you in the next one!

• 
  @wheelerdetailers2 ай бұрын

  This is the final video of our 3-part series on "how to clean your car". Everything from pre cleaning and snow foaming, to some serious wheel and tire cleaning and de ironizing and finally providing your car with some ceramic protection before drying, has been covered in this series. We hope this helps you, and should you have any questions feel free to drop them down below. We'll see you, in the next one. Bye bye. 🙋‍♂

• 
  @wheelerdetailers2 ай бұрын

  Hi Everyone, in this video it's all about deep wheel cleaning, de ironizing and tire wall cleaning, let us know if you have any questions...

• 
  @Gimblevalve2 ай бұрын

  Somewhere most don't clean....for some reason 🤷‍♂️

• 
  @Kerleem2 ай бұрын

  My car needs this treatment for sure, especially after winter! 🤩😊

• 
  @PieterCdeGeus2 ай бұрын

  very long video just to show how to dry a car!

• 
  @wheelerdetailers5 күн бұрын

  We are learning every week again, I hope the later videos are better in your opinion

• 
  @texfromro2 ай бұрын

  A good ideea is to put the water forst and then the chemicals to minimize the suds spilling out the bottle... And guys ... you dint know how a super dirty car looks like😅

• 
  @wheelerdetailers2 ай бұрын

  There are more ways that lead to Rome :-)

• 
  @vincentdiaz40682 ай бұрын

  🌷 'promosm'

• 
  @ralolor65192 ай бұрын

  If wax is applied tothe car can it be speed wipe used ?

• 
  @wheelerdetailers2 ай бұрын

  If a synthetic wax then yes its a good choice

• 
  @tafl-91983 ай бұрын

  That unprotected side doesnt look so unprotected ?

• 
  @MrJanko133 ай бұрын

  Good test, thank you. Just few comments: Of course for Flex, backing pad must be screwed first into excenter nut and insert in machine, what you discovered in 09:55 :-). But I know that it was your first observation and test. Small backing pad (30 mm and not 1 inch) can be used with 12 mm excenter nut for polishing and not only with 3 mm for sanding. Same for bigger one 75 mm. In the set there is no 50 mm pad but you can buy it separately. I recommend it. Flex is not only polisher but sander too. You have right, due to size and weight it´s not powerful as others but if you will use microfibre or wool pads, it will cut much better of course. Keep continue, good job and nice day. Greeting from Slovakia

• 
  @wheelerdetailers3 ай бұрын

  Thank Janko, much love from Holland

• 
  @SoleMax233 ай бұрын

  That’s the Shinemate EB351 3/12…🥴

• 
  @arnenuggat3 ай бұрын

  Cleaning power ?!? Is it a soap too ??

• 
  @aliaskink3 ай бұрын

  How long is the protection supposed to last?

• 
  @wheelerdetailers5 күн бұрын

  We did ca 3 a 4 wash cycles before the effect was not so good anymore.

• 
  @stevenguzy5703 ай бұрын

  I don't want to be too critical but, I think these are a little crazy. A bit extravagant, I would say. What is the big deal about pulling out a little more hose to go around the car? What happens with these should the hose pop out of the track and go under the tire anyway? Just my honest opinion. Good luck selling them!

• 
  @wheelerdetailers5 күн бұрын

  Its good to be critical and we can understand your point of view. Myself started washing vans and trucks since I was 8 years old and in those days we didn't have all this and we also worked with pleasure and results. Time doesnt stand still and our industry is moving forward, in this light the Hose Slide Guards are an extra accesory. Its convenient to have, its not mandatory.

• 
  @stevenguzy5705 күн бұрын

  @@wheelerdetailers Of course! it's definitely a luxery! If I received them as a gift, I would use them. I appreciate your response!

• 
  @VluggeJapie334 ай бұрын

  Moet je wel een HD reiniger hebben waarbij je de standaard lans los kan maken

• 
  @wheelerdetailers5 күн бұрын

  Das idd wel handig hehe :-)

• 
  @BADMOPARCZ4 ай бұрын

  I tried products from Meguiar's, Rupes and others but the final result is not even close comparing to Menzerna on my black Dodge Challenger. Let me ask You one question. Where You get Your detailing cart?

• 
  @wheelerdetailers4 ай бұрын

  Tnx :-) Detailing Trolleys can be found here; www.carcare24.eu/en/workshop-garage-equipment.html?p=2

• 
  @filipradic13834 ай бұрын

  Hi Martin, did you clean the rubber seals with pure IPA or with water diluted IPA

• 
  @DJMerck4 ай бұрын

  I'm not sure this is a legit ceramic coating because aren't we supposed to be looking for the silicon dioxide percentages?

• 
  @804MRMAN3 ай бұрын

  You put this on EVERY video about Hydrospin 😂

• 
  @DJMerck3 ай бұрын

  @@804MRMAN good, so I didn't miss any? Lol

• 
  @wheelerdetailers5 күн бұрын

  Hiiii CG doesnt share this exact information unfortunately.

• 
  @TheSalvadorarana4 ай бұрын

  More pressure water

• 
  @wheelerdetailers5 күн бұрын

  From the tap there comes not more pressure. This video is intended to show if / how a foam gun on the tap / garden hose could work.