Пікірлер

• 
  @UserBrazilian199922 сағат бұрын

  🇧🇷🤙

• 
  @GURFLUNKINWAКүн бұрын

  Great video, straight to the point and very informative. 🙏🏽

• 
  @BDTube2006Күн бұрын

  @@GURFLUNKINWA I appreciate the comment! Thank you.

• 
  @chadjackson54705 күн бұрын

  The manual doesn't explain how to reset the filter light. When I replaced the filter the first time I didn't play your video to the end and the light has remained on. Thank you for including this step in your video. I wonder how many homes that have this microwave have this filter light on?

• 
  @BDTube20065 күн бұрын

  Thank you for the comment! ...That's also a great question! :D ...I would add, how many of those homes completely disregard cleaning and changing their filters too (especially the grease filter). It's a simply fix that adds so much value. Again, thank you for your comment.

• 
  @touji007 күн бұрын

  A tip when the touch stops working on the lcd, even with the reboot.... Plug a mouse into the USB port and you can use it as a pc, without having to completely replace the lcd and spend hundreds of dollars.

• 
  @Dreambigdreams110 күн бұрын

  Did the factory reset and now when I turn it on it shows Samsung when it starts then family hub then goes on a blank screen. Tried the mouse and nothing is working. Any tips on what I can do? I've unplugged left off for a min. Switched the red button off for 15 secs 30 mins etc and still nothing. Was working perfectly before I did the Factory reset I was just trying to get it off of retail mode. Thanks

• 
  @BDTube200610 күн бұрын

  The demo mode can be turned off through the settings, factory reset is not required. However, there was a recent Family Hub update (I actually updated mine this morning August 08 2024) which I'm curious if the Hub tried installing the update upon resetting the unit. I would try cutting the power (at the breaker) and leaving it off for five (5) minutes. Hopefully whatever residual power stored with dissipate and clear whatever may be in memory. Keep me posted.

• 
  @pawsandpedals40710 күн бұрын

  What size o rings did you use?

• 
  @BDTube20069 күн бұрын

  I believe it was the 006 o-ring. amzn.to/3WUaswK

• 
  @CorneliusSmalleliterealtor10 күн бұрын

  my touch screen was not responding at all. Back to normal now. Thanks

• 
  @BDTube200610 күн бұрын

  Wonderful! I'm glad it worked out for yea! Well done! Thank you for the comment--

• 
  @Masterofrefrigerator9756.17 күн бұрын

  sir can you tell me my samsung led refrigerator has its touch hang keeps on working when the comp is running but when the comp is turned off the touch works fine what can be the problem

• 
  @BDTube200616 күн бұрын

  Please define "comp", I'm having difficulty understanding the term in this instance. Thank you.

• 
  @bl4z3pupz21 күн бұрын

  I have an older tizen 3.0 fridge and it doesn't respond to touch and always displays a door open message but the actual fridge works fine

• 
  @BDTube200621 күн бұрын

  @bl4z3pupz if the screen is not responding via touch, I'd suggest trying to plug-in a USB mouse to the fridge and try the factory reset. Hopefully, this reset will regain the touch capability. Just know you will lose all configurations currently stored. Let me know how this works out.

• 
  @crankshaft00722 күн бұрын

  If you have the exterior vent installed, do you need to install the carbon filter ?

• 
  @BDTube200622 күн бұрын

  @crankshaft007 if venting to the exterior, no, the carbon filter is not required. The carbon filter is for recirculation only.

• 
  @kingdevoneomusic24 күн бұрын

  Nice 😎👌💯

• 
  @BDTube200623 күн бұрын

  @@kingdevoneomusic Thank you for the comment!

• 
  @kingdevoneomusic22 күн бұрын

  @@BDTube2006No problem man and if you got multiple notifications under this comment it’s because KZread randomly deletes my comments for no reason but I subscribed too bro.

• 
  @ianntharoseberry750825 күн бұрын

  How can I swipe down if the screen is not responding?

• 
  @BDTube200625 күн бұрын

  @ianntharoseberry7508 thank you for your question. Is your screen still not responding even after using the switch? If not, then you can also plug in a USB mouse (or Bluetooth mouse) to navigate the screens that way. Keep me posted!

• 
  @incredifunk29 күн бұрын

  You didn't have to reprogram the sensor on the spare tire?

• 
  @BDTube200628 күн бұрын

  @@incredifunk the spare tire on my Tundra did not have a sensor, so no additional codes needed to be written to the module.

• 
  @yesyquinn878Ай бұрын

  I did the 3 of them none working the last step is manage to setting but can go to the option as I need to slide down and not responding 😪

• 
  @BDTube2006Ай бұрын

  @@yesyquinn878 I would suggest hooking up a wired (or Bluetooth) mouse. This will allow you to navigate with the mouse vs. using the touch screen. Keep me posted!

• 
  @yesyquinn878Ай бұрын

  @@BDTube2006 yes!!! Works now I just left the mouse next to it 😁 thank you 🙏

• 
  @BDTube200629 күн бұрын

  @@yesyquinn878 Wonderful! Great job!

• 
  @whatsup6969Ай бұрын

  Can you also wash the charcoal filter?

• 
  @BDTube2006Ай бұрын

  @@whatsup6969 unfortunately, no. Only the grease filter can be washed. The charcoal filter must be replaced.

• 
  @whatsup6969Ай бұрын

  @@BDTube2006 Thanks.,.

• 
  @betser28Ай бұрын

  Thanks bro very helpful and straight to the point 👌👌

• 
  @BDTube2006Ай бұрын

  @betser28 perfect! Thank you for taking the timeout to comment. It's appreciated.

• 
  @kuldeepcheema8162Ай бұрын

  There is usb port on same door. U can plug the mouse to access and reset the screen.

• 
  @BDTube2006Ай бұрын

  @@kuldeepcheema8162 correct.

• 
  @user-qx9pb8eb8sАй бұрын

  Good night. The Refrigerator screen does not turn on. I already turned it off and turned it on again and it won't turn on. In this case it could also be factory reset, excuse me? Aid!

• 
  @BDTube2006Ай бұрын

  Greetings--I'd recommend removing the power at the breaker (or unplugging). Let the unit stand for one (1) minute, then restore the power. If the family hub screen does not come back on (stays blank--no image, no icons, etc.); then you may have a faulty board/monitor and may require repair.

• 
  @joepacheco7979Ай бұрын

  You just saved me almost $700-$1000! My screen was blank but with icons on the bottom. Nothing worked... until your secret menu 10 second trick! YOU ARE AWESOME!!!!!

• 
  @BDTube2006Ай бұрын

  Yes! That's great! Well done!

• 
  @wendytalley6244Ай бұрын

  Thank goodness you made this video!

• 
  @BDTube2006Ай бұрын

  @wendytalley6244 you're very welcome! Glad to assist.

• 
  @JohnFleming-sw7hnАй бұрын

  As being on budget with ongoing life and some things that I been dealing with! In 2019, in glad and grateful that I ended up with a Beretta 92fs Italian made in 2018 which works very good!

• 
  @BDTube2006Ай бұрын

  @@JohnFleming-sw7hn it's a wonderful pistol.

• 
  @kuldeepcheema8162Ай бұрын

  hi there I have received few emails regarding family hub refrigerator. and tried with mouse to reset the factory setting. and I have done that but still touch screen not working.

• 
  @BDTube2006Ай бұрын

  So your screen is unresponsive to touch even after the factory reset? I'm curious if you are experiencing the inoperative user interface failure. A Samsung service ticket may need to be created.

• 
  @kuldeepcheema8162Ай бұрын

  @BDTube2006 I have to get replaced the touch. And it's working fine now

• 
  @aztechomie6422 күн бұрын

  @@BDTube2006 i did all these steps and this was happing off and on when i bought new from store what else can i do besides having Samsung wanting to charge me more money for something that was not working to begin with? Thank you

• 
  @BDTube200622 күн бұрын

  @@aztechomie64 if you've completed the full factory reset (not the restart, but reset). That's pretty much the last option as far as software goes.

• 
  @aztechomie6421 күн бұрын

  @@BDTube2006 is thier anything i can download online and put it on a usb to insert it to fridge?

• 
  @kuldeepcheema8162Ай бұрын

  I have tried to switch it off and back on but my touch comes back on but it won't let me do anything. so basically touch not working. any suggestions plz do let me know 🙂

• 
  @BDTube2006Ай бұрын

  Okay--not a problem! Go back to the area where the switch is that turns the screen ON/OFF. In this area, you will see a USB port along the side. Plug in a wired USB mouse and cursor will appear. Now you can navigate to the settings via the mouse and factory reset your device. Keep me posted! Good luck!

• 
  @fflunited8181Ай бұрын

  ​@BDTube2006 doesn't have to be wired. Can be one with a Bluetooth adapter. However factory data reset didn't work on mine. Sad

• 
  @fflunited8181Ай бұрын

  ​@BDTube2006 I take that back it worked but I had to go through the first few setup steps with the mouse. Thanks!!!

• 
  @BDTube2006Ай бұрын

  @fflunited8181 yea, I didn't want to go down the rabbit hole with the Bluetooth adapter (just in case others are reading) trying to keep it simple, but you got! Well done! Glad you're up and running!!

• 
  @auroracuevas5814Ай бұрын

  Mi refri screen turns black , that is normal? I would like to keep on always, that is possible?

• 
  @BDTube2006Ай бұрын

  To extend the screen's life, it's set up to automatically turn off. It's preferred to have the screen shut off to not "burn" statix graphics into the screen. However, you can keep the cover screen ON for up to two (2) hours before the screen shuts off. Unfortunately, there is not an option to leave the screen ON (all the time). To change/extend the screen time, go to Settings, under the Display settings, you can turn ON "Cover screen". The cover screen is the screen saver graphic before shutting OFF). You can change the cover screen duration from 2 minutes to 2 hours. If you turn OFF cover screen, then you will see the option for "Screen Turns OFF After" which is only between 1 to 5 mins.

• 
  @KrispyDaDragonmasterАй бұрын

  😢🎉🎉😂 L

• 
  @nickhid2 ай бұрын

  The user manual told me to refer to the user manual to install the filter...........youtube to the rescue!

• 
  @BDTube20062 ай бұрын

  Haha. Classic. An endless loop! Ha!

• 
  @jenashajohnson70062 ай бұрын

  I tried holding the split squares still was unresponsive.

• 
  @BDTube20062 ай бұрын

  What issue are you having with your display?

• 
  @tarpara2 ай бұрын

  Thanks for this video! I opened mine to replace the carbon filter. I could not replace the filter because there was nothing to replace😂. 10 years without lol. I bought a 6 pack of filters will see if it even makes a difference.

• 
  @BDTube20062 ай бұрын

  Ha! Whoa! 10 yrs?! I'm certain it should make a difference. :D Thank you for the comment!

• 
  @carolfosmo48122 ай бұрын

  Question please: if my microwave has a vent on top would I not need the charcoal filter as displayed??? Thanks so much!! Loved your video!!!

• 
  @BDTube20062 ай бұрын

  If it's venting back into your kitchen, I would recommend having the charcoal filter.

• 
  @carolfosmo48122 ай бұрын

  My microwave doesn’t seem to have the top filter for replacement ???!

• 
  @BDTube20062 ай бұрын

  What model microwave do you have?

• 
  @ms10079012 ай бұрын

  Clear explanation. Thank you

• 
  @BDTube20062 ай бұрын

  You're welcome--thank you!

• 
  @ardrian12372 ай бұрын

  nice

• 
  @iliya25602 ай бұрын

  I am from Iran and I bought this refrigerator I forgot my Android PIN, how can I reset it?

• 
  @BDTube20062 ай бұрын

  The default pin is 0000; however, if that does not work, then click the link at the bottom of the number pad, "Forgot your PIN?"; this will walk you though the step to recover your pin. Once you have your pin, you can then go back to the Security Settings and disable security pin if you no longer want it enabled.

• 
  @iliya25602 ай бұрын

  @@BDTube2006 The problem is that I have to enter the PIN again to connect to the Internet

• 
  @BDTube20062 ай бұрын

  @@iliya2560 Ahh, then your only option is to do a factory reset. You'll have to goto that "secret menu" to reset the fridge. This menu bypasses all settings--simply follow my steps in the video --> 3:48 That should take care of it.

• 
  @iliya25602 ай бұрын

  @@BDTube2006 I did it, but unfortunately it did not open any options, it just says no application

• 
  @BDTube20062 ай бұрын

  @iliya2560 it seems the hub didn't register your press and hold if the text "no applications" showed up or you released too early. Try it again, and make sure your finger doesn't come off the screen. Continue holding the applications icon until you see the secret menu pop-up (approx. 10 seconds). I get the "no applications" prompt if I press and hold and release before the menu is displayed, so I suggest trying to hold a little longer. If your screen isn't registering your press and hold, you may want to reboot the screen by using the switch method--this will recalibrate the screen for you, then try again. Hopefully, it was only an issue of not holding the icon long enough. If that doesn't work, please tell me what model fridge you have--typically, there is a label on the side of the fridge, located at the bottom.

• 
  @lt472 ай бұрын

  Very thoroughly explained. Thank you!

• 
  @BDTube20062 ай бұрын

  Thank you for taking the time out to comment!

• 
  @lt472 ай бұрын

  You're welcome. Was having lingering cooking smells which led me to your video about filter changing. I opened my Samsung on top and NO filter at all! The knuckleheads from Home Depot installed my Microwave without a charcoal filter! Anyway, got a perfect fitting inexpensive Botna filter on Amazon. Thanks again!

• 
  @BDTube20062 ай бұрын

  @lt47 Well done! I'm glad you got it fixed properly! Ha!

• 
  @blessedjuggernaut3 ай бұрын

  I chose my CZ P10f over the Taurus PT92. 5.1 inch barrel, 4.5lb trigger with an almost instant reset, night sights, under rail and 21 rd mags out of the box. 32 rd Pro Mags. The price difference was about $200 less than the Taurus.

• 
  @rarau19183 ай бұрын

  Thank you so much !..I was about to break my microwave, the pull to the side was my issue cause it was not coming out.

• 
  @BDTube20063 ай бұрын

  Haha! I'm glad you found this video! Well done! Your microwave appreciates it! :D Hopefully, it came out much easier!

• 
  @kickinwithkelly16343 ай бұрын

  Thank you kindly, I’m so thankful I came across your video. We’ve had our Microwave up for more than a several months. Just noticed my filter light is on. We have the same model MW. I would like to ask you a serious question please. Does the top portion of your MW tilt forward approx 1” (or so)? I’m assuming this is so I can access the screws in order to get to the Charcoal Filter easily.

• 
  @BDTube20063 ай бұрын

  Thank you for the comment, I'm glad you found value with this video. As far as the top, my unit doesn't really "tilt" forward; however, the unit does protrude outwards (as you mentioned for access to the filter housing).

• 
  @kickinwithkelly16343 ай бұрын

  @@BDTube2006 I appreciate your reply more than you know. Thanks so much. You’ve gained a new follower 😊 As others have said, you really do a fantastic and thorough job walking us through. I now have a clean Charcoal Filter, in part thank to you. YAY!

• 
  @BDTube20063 ай бұрын

  @kickinwithkelly1634 that's great! You're very welcome. Well done!

• 
  @joshdrouard41923 ай бұрын

  THANK YOU !!!!

• 
  @BDTube20063 ай бұрын

  You are quite welcome!

• 
  @scottallison113 ай бұрын

  My touchscreen stopped working. Was out of warranty. Samsung wanted $200 in call fee and labor + parts. This screen is around $950. You would be better buying a new fridge. I managed to get a salvage screen off EBay for $245. Last time I will buy something like this, too many things can go wrong and expensive fix.

• 
  @BDTube20063 ай бұрын

  What are your thoughts on the screen installation? Straight forward?

• 
  @anaradermacher79143 ай бұрын

  Hi !!!! Do you have an installation video for this microwave? Anyway, objective video and I really liked it! Thanks for sharing! 👍

• 
  @BDTube20062 ай бұрын

  You are quite welcome! Unfortunately, I do not have an install video. However, I wish I did as I would have installed this much cleaner than the previous installation :D whoever install this setup butchered my cabinets--Ha!

• 
  @grenadeonceadaykeepstheene70533 ай бұрын

  Its M9 not 92fs

• 
  @BDTube20063 ай бұрын

  Interesting. Could you elaborate as to why you believe it's a M9 vs. 92FS?

• 
  @grenadeonceadaykeepstheene70533 ай бұрын

  @BDTube2006 because the dust cover is straight on frame. Italian made 92fs have slanting dust cover. US made m9 have straight cover. This one has straight cover. I am 99% sure that its USA made m9.

• 
  @BDTube20063 ай бұрын

  @grenadeonceadaykeepstheene7053 The M9 vs 92FS are nearly identical... However, this pistol is engraved with 92FS on the slide.

• 
  @BDTube20063 ай бұрын

  @grenadeonceadaykeepstheene7053 The M9 vs 92FS are nearly identical... However, this pistol is engraved with 92FS on the slide.

• 
  @ACGR-yq6vx3 ай бұрын

  After 4 minutes ON, the screen goes black, completely off, It won't make any move, It keeps happening even after the manual reboot over and over, I really don't know what to do 😞 I mean, I can't even finish listening to one song, please help me 😢

• 
  @BDTube20063 ай бұрын

  Have you tried a full factory reset?

• 
  @1978ECM3 ай бұрын

  What size charcoal filter is that? After a thorough cleaning this weekend, I just realized that the one in my rental was missing.

• 
  @BDTube20063 ай бұрын

  Charcoal = 9" x 4"; the links in the video description have a few options available. This size covers quite a few models.

• 
  @Apple-zu3xh4 ай бұрын

  Well done !!! Thank you

• 
  @BDTube20063 ай бұрын

  You are quite welcome! I'm glad to assist! Your comment is appreciated!

• 
  @bryanp80104 ай бұрын

  Mine fell off at the car wash a week after buying the truck new. I ended up gluing it with rubber molding glue. Toyota really screwed up on this one

• 
  @BDTube20064 ай бұрын

  Well played! I thought it was odd that the longer pieces just sit in the channel without any other adhesive--it made for an easy install, just strange.

• 
  @gordonnguyen71604 ай бұрын

  So if the light flashing you need to replace a new receiver and the tpms ?

• 
  @BDTube20064 ай бұрын

  First diagnosis step would be to check the battery life of each of the TPMS sensors (typical lifespan is approx. 5-10 yrs). Any "dead" TPMS sensors will require a replacement for each dead sensor. If all TPMS sensors are showing a healthy battery status upon scanning, but you you still have a low pressure dash light, make sure all tire pressures matched the sticker on the driver's side door frame (this will give you the exact pressure that is programmed into the module). Make sure you relearn the pressure that you set it to (the little button under the dash). If those fail, then I would move on to the TMPS Receiver.

• 
  @67goodoleboy674 ай бұрын

  @3:16 That's what she said!

• 
  @BDTube20064 ай бұрын

  Well played sir. Well played. Haha.

• 
  @diamondvasquez76494 ай бұрын

  Your a life savor did not know about the switch on top. Now my screen is working again

• 
  @BDTube20064 ай бұрын

  That's great! Well done! Glad it worked out.

• 
  @anuaujla90075 ай бұрын

  When will the filter light goes off

• 
  @BDTube20065 ай бұрын

  Simply press the Gear Icon (0 key), and the filter light will turn off.

• 
  @anuaujla90075 ай бұрын

  @@BDTube2006 thank you

• 
  @BDTube20065 ай бұрын

  @@anuaujla9007 No problem!

• 
  @incroyable29305 ай бұрын

  Best video out here! This was explained so much better than others. You made this so simple.

• 
  @BDTube20065 ай бұрын

  Perfect! Glad it worked out! Wonderful comment! Thank you--it's appreciated!