True not a muscle bike nor a real Schwinn as I not into Pacific Cycles bikes but what triggered me was the front wheel part a well known name "Sturmey Archer" drum brake. These bikes when came out in 2020 were $700 bikes online and later Amazon. Not worth that even half or free lol. But got this one for $200 new just used on some photo shoot 30 miles from me and stored away. It rides nice and just a cruiser ride bike nothing special as it is made horrible but it is what it is. One can buy these now online for $500 lol.
@user-wh3uw9vc7g19 күн бұрын
КЛАССИКА --- ВЕЛИКОЛЕПНА о таком можно только помечтать -- браво .
@amannerikАй бұрын
super weird question but in regard to those speakers yo u got from work Vivitar Qub Desktop spears is the sounds quality just that trash? I got them for hitting 5 years at comerica and couldnt be more pissed off about them lol
@sting64azАй бұрын
Actually I should of said, "semi" new on this 2020 Orange Krate 125th anniversary. The Stingray bicentennial I meant to say replace the reflector bracket I made for it and replacing it with the correct bracket.
@jebbthetrainkid1281Ай бұрын
Nice Bikes. I collect them too.
@buggz1604Ай бұрын
Nice bike!! Thanks for sharing this with us, every time I see a clean schwinn like this I get motivated to work on my project schwinn stingray
@buggz16042 ай бұрын
Great video alot of techniques for these schwinns, 😎👍
@buggz16042 ай бұрын
Great video, keep them coming... new to schwinn stingray bicycles...used to bulld lowrider bikes bow im getting into OG schwinn bikes
@jaimefernandez3076Ай бұрын
Im in the same boat! What year Schwinn you building?
@buggz16042 ай бұрын
These side markers fit a pumpkin??
@sting64azАй бұрын
Sears light yes if you find a Sears light corroded but it for the amber lens for parts. I fixed one in the past a Pumpkin light nice one missing 1 amber lens and replaced it no one knew the differences lol.
@sting64azАй бұрын
There were a few other brands with amber markers but the Sears battery headlight looked very close and works. I would recommend if you find a non working Sears light on auction or elsewhere use a lubricant and spray on each side markers let it set and carefully from the inside pinch one end and it will pop out and carefully installing on pumpkin light not to crack tabs.
@buggz1604Ай бұрын
@sting64az thanks jbl, I am going to be looking for the parts... thanks for the advice!😎👍
@tomkarau2 ай бұрын
Made in China
@sting64az3 ай бұрын
Meant to say 2 dimple safety edge fender lol. Been a long day getting tired.
@sting64az5 ай бұрын
eBay seller "Bicyclebones" has two listings of these Krate fenders. One listing is what he titles "Ok plating" for rider and the other is his "quality". fenders. These are his "Ok plating" but with some polishing you can make them a tab nicer.
@leonardarola6 ай бұрын
Orange?! Even Schwinn wants to be a Flying Merkel...
@sting64az6 ай бұрын
That is Pacific Cycles for you owners of the Schwinn name nothing more than that. Schwinn been gone since 1991 and thereafter owned by Schwinn Cycling and Fitness till 2001 then the end of the era. Today it is what it is.
@MrStingraybernard6 ай бұрын
That orange is awful , way to brite
@sting64az6 ай бұрын
The color even back to the 1998 re-issues were not correct colors as they were back in the days. Schwinn Cycling and Fitness brought these back Krate coasters since 1972 last time they were out. The frames on the 1998 were spot on just not the paint color among other details of the bike. These 2020 are Pacific Cycles creations which all of their Stingrays when they took over in 2001 are horrible. I only bought this as it was cheap $200 an offer, I message the local seller and he accepted it. I only like the Sturmey Archer front drum brake and this bike was only used as a prop at some local fashion event and then stored for a few years in a warehouse.
@rawtoe4376 ай бұрын
I still have mine that my parents bought me in 1972. It's in bad shape, so I'm sure it would cost me thousands to restore.
@sting64az6 ай бұрын
Post some pics and describe the parts and hardware you might need to put it back together. I find out sometimes maybe cheaper to find parts in groups then auction site. But either way I done well on both just have to set up a budget and slowly work on it.
@Crimson3ffect6 ай бұрын
Gorgeous bike
@goadgoad810410 ай бұрын
Good health body strong
@nurlan.rakhmanov.931810 ай бұрын
😍😍
@RadioFixer Жыл бұрын
This is great video. So many interesting there, like to have some of those record players. Thanks for sharing. Regards, Jay
@RadioFixer Жыл бұрын
There are so many nice bicycle, so awesome! Have not seen this many all in one place. Have a good day! Regards, Jay
@RadioFixer Жыл бұрын
My sincere condolences to you and your family. I know how difficult it is to losing brother, mom, and dad. Regards, Jay
@javanthomas4122 Жыл бұрын
Beautiful
@brianthesewingmachinetechn97153 жыл бұрын
I worked in the factory that made the reproduction Black Phantom bicycles. I did the pinstriping of the tanks and chain guards. The factory was in Ontario, California. The Kirkbride family ran this factory. The frame welders were in San Bernardino, and the powder coater next door to the factory. It was a pretty amazing operation. Factory location near Franklin and Grove off the 60 freeway.
@Siggy_Sour9 ай бұрын
hey i got a taiwan cruiser deluxe 1995. do u know anything about the back lights havoing a generator option. mine has a wire running to the wheel.
@brianthesewingmachinetechn97159 ай бұрын
@@Siggy_Sour Sorry, I don't know about the lights on your cruiser
@Siggy_Sour9 ай бұрын
@@brianthesewingmachinetechn9715 thanks anyway, i realize it has a shimano coaster Dynamo hub so im getting closer.
@antoniabermudez75014 жыл бұрын
Hi There! It's Me, you've subscribed yourself to my channel... I just wanted you to know that I feel So Thankful👌... So I subscribed to yours also!! I hope you really ENJOY The 🎵🎶🎵 on my Playlists, although I don't upload anything like You... I honestly wish I could but I don't have any Music of my own! We'll be in touch & Thanks Again👌
@christronicsdereksrandomness364 жыл бұрын
I dig the boombox! I really like that it has an 8-track player built-in!
@sting64az4 жыл бұрын
Montgomery Wards...I bought it in 1980 and took it on Fridays back in High School....I changed the belts in it only 1 time about 10 years ago...Probably a lot better now replacement belts then it had back in the days...
@carlosrosero88776 жыл бұрын
One more thing if this is was made in USA it shouldn't be half the serial number in the bottom of it on the back of the frame of the wheel and there you have it made in the US but if this it doesn't have one that had to be made in China
@carlosrosero88776 жыл бұрын
1997 made in China 100% everything is made in China
@garyquail23475 жыл бұрын
It's sad but true but I believe there was a guy in Southern California that was reproducing the fenders that chain guard the rack the tail light and the horn tank.
@schwinnstingrayguy37578 жыл бұрын
And my handle bars are only $30 for the phantom reproduction
@sting64az8 жыл бұрын
+Leifberg Studios That is a good price. These pre-war 40's re-issue were less then $30.00 back in 1996 when they came out. Now most of Phantom re-issue parts have triple the original prices. This one i seen go off over $250.00 on ebay several years ago.
@garyquail23474 жыл бұрын
@@sting64az well we collectors call eBay now feebay used to be able to sell for free on eBay but no more.
@robkunkel8833 Жыл бұрын
@@awesomeone2979 .. Returning the bike to Walmart? Is this something to boast about? Would other commenters do that? I hope not.
@schwinnstingrayguy37578 жыл бұрын
The frames are all the same
@garyquail23475 жыл бұрын
I believe the balloon tire frame was not the same size as you think you're probably thinking of a middleweight frame but the balloon tire fenders would not fit inside the middleweight frame actually the frame is it design from the 1946 Schwinn B6 autocycle.
Пікірлер
welcome home brother.
No stick shift? Not a muscle bike
True not a muscle bike nor a real Schwinn as I not into Pacific Cycles bikes but what triggered me was the front wheel part a well known name "Sturmey Archer" drum brake. These bikes when came out in 2020 were $700 bikes online and later Amazon. Not worth that even half or free lol. But got this one for $200 new just used on some photo shoot 30 miles from me and stored away. It rides nice and just a cruiser ride bike nothing special as it is made horrible but it is what it is. One can buy these now online for $500 lol.
КЛАССИКА --- ВЕЛИКОЛЕПНА о таком можно только помечтать -- браво .
super weird question but in regard to those speakers yo u got from work Vivitar Qub Desktop spears is the sounds quality just that trash? I got them for hitting 5 years at comerica and couldnt be more pissed off about them lol
Actually I should of said, "semi" new on this 2020 Orange Krate 125th anniversary. The Stingray bicentennial I meant to say replace the reflector bracket I made for it and replacing it with the correct bracket.
Nice Bikes. I collect them too.
Nice bike!! Thanks for sharing this with us, every time I see a clean schwinn like this I get motivated to work on my project schwinn stingray
Great video alot of techniques for these schwinns, 😎👍
Great video, keep them coming... new to schwinn stingray bicycles...used to bulld lowrider bikes bow im getting into OG schwinn bikes
Im in the same boat! What year Schwinn you building?
These side markers fit a pumpkin??
Sears light yes if you find a Sears light corroded but it for the amber lens for parts. I fixed one in the past a Pumpkin light nice one missing 1 amber lens and replaced it no one knew the differences lol.
There were a few other brands with amber markers but the Sears battery headlight looked very close and works. I would recommend if you find a non working Sears light on auction or elsewhere use a lubricant and spray on each side markers let it set and carefully from the inside pinch one end and it will pop out and carefully installing on pumpkin light not to crack tabs.
@sting64az thanks jbl, I am going to be looking for the parts... thanks for the advice!😎👍
Made in China
Meant to say 2 dimple safety edge fender lol. Been a long day getting tired.
eBay seller "Bicyclebones" has two listings of these Krate fenders. One listing is what he titles "Ok plating" for rider and the other is his "quality". fenders. These are his "Ok plating" but with some polishing you can make them a tab nicer.
Orange?! Even Schwinn wants to be a Flying Merkel...
That is Pacific Cycles for you owners of the Schwinn name nothing more than that. Schwinn been gone since 1991 and thereafter owned by Schwinn Cycling and Fitness till 2001 then the end of the era. Today it is what it is.
That orange is awful , way to brite
The color even back to the 1998 re-issues were not correct colors as they were back in the days. Schwinn Cycling and Fitness brought these back Krate coasters since 1972 last time they were out. The frames on the 1998 were spot on just not the paint color among other details of the bike. These 2020 are Pacific Cycles creations which all of their Stingrays when they took over in 2001 are horrible. I only bought this as it was cheap $200 an offer, I message the local seller and he accepted it. I only like the Sturmey Archer front drum brake and this bike was only used as a prop at some local fashion event and then stored for a few years in a warehouse.
I still have mine that my parents bought me in 1972. It's in bad shape, so I'm sure it would cost me thousands to restore.
Post some pics and describe the parts and hardware you might need to put it back together. I find out sometimes maybe cheaper to find parts in groups then auction site. But either way I done well on both just have to set up a budget and slowly work on it.
Gorgeous bike
Good health body strong
😍😍
This is great video. So many interesting there, like to have some of those record players. Thanks for sharing. Regards, Jay
There are so many nice bicycle, so awesome! Have not seen this many all in one place. Have a good day! Regards, Jay
My sincere condolences to you and your family. I know how difficult it is to losing brother, mom, and dad. Regards, Jay
Beautiful
I worked in the factory that made the reproduction Black Phantom bicycles. I did the pinstriping of the tanks and chain guards. The factory was in Ontario, California. The Kirkbride family ran this factory. The frame welders were in San Bernardino, and the powder coater next door to the factory. It was a pretty amazing operation. Factory location near Franklin and Grove off the 60 freeway.
hey i got a taiwan cruiser deluxe 1995. do u know anything about the back lights havoing a generator option. mine has a wire running to the wheel.
@@Siggy_Sour Sorry, I don't know about the lights on your cruiser
@@brianthesewingmachinetechn9715 thanks anyway, i realize it has a shimano coaster Dynamo hub so im getting closer.
Hi There! It's Me, you've subscribed yourself to my channel... I just wanted you to know that I feel So Thankful👌... So I subscribed to yours also!! I hope you really ENJOY The 🎵🎶🎵 on my Playlists, although I don't upload anything like You... I honestly wish I could but I don't have any Music of my own! We'll be in touch & Thanks Again👌
I dig the boombox! I really like that it has an 8-track player built-in!
Montgomery Wards...I bought it in 1980 and took it on Fridays back in High School....I changed the belts in it only 1 time about 10 years ago...Probably a lot better now replacement belts then it had back in the days...
One more thing if this is was made in USA it shouldn't be half the serial number in the bottom of it on the back of the frame of the wheel and there you have it made in the US but if this it doesn't have one that had to be made in China
1997 made in China 100% everything is made in China
It's sad but true but I believe there was a guy in Southern California that was reproducing the fenders that chain guard the rack the tail light and the horn tank.
And my handle bars are only $30 for the phantom reproduction
+Leifberg Studios That is a good price. These pre-war 40's re-issue were less then $30.00 back in 1996 when they came out. Now most of Phantom re-issue parts have triple the original prices. This one i seen go off over $250.00 on ebay several years ago.
@@sting64az well we collectors call eBay now feebay used to be able to sell for free on eBay but no more.
@@awesomeone2979 .. Returning the bike to Walmart? Is this something to boast about? Would other commenters do that? I hope not.
The frames are all the same
I believe the balloon tire frame was not the same size as you think you're probably thinking of a middleweight frame but the balloon tire fenders would not fit inside the middleweight frame actually the frame is it design from the 1946 Schwinn B6 autocycle.