Пікірлер

• 
  @tehsalt17 күн бұрын

  Do not use outputs coming from the back of the stereo for use with a LOC. Your afternarket subwoofer will not play anything below 40 or 50hz.. so almost midbass sound regardless if you use 1000 watts rms, a 12 inch or a 15 inch subwoofer. The right cables to use are under the driver's seat on the harness going to the bose amplifier, these wires are input wires that haven't passed through the crossover section which limits the frequencies going to the tiny factory 5 inch subwoofer.

• 
  @kellballsАй бұрын

  Thanks for the video. Super helpful. Im going to order the parts today. I’m gonna attempt this but just curious why you need the crux in addition to the maestro. I’m under the impression that they do the same thing, enable steering wheel controls? Also, is the apple car play head unit you used wireless or wired?

• 
  @TmoneygarageАй бұрын

  Thanks for watching and for the comment! No, you don't need both. I started with the crux but ran into a bunch of issues so I switched to the maestro. I just used the harness from the crux so I wouldn't need to splice into the actual factory audio harness. The head unit is wired. It'll plug into the existing aux port in the truck.

• 
  @beaty90985 ай бұрын

  What color was the wire you connected the blue and white wire to?

• 
  @Tmoneygarage3 ай бұрын

  Sorry I forgot to reply to your comment earlier. To be honest I don’t remember but I either didn’t use it or it was spliced to a power wire like the 12v cigarette lighter. It’s a signal wire so you just need to tap it to something that turns on when you turn the car on.

• 
  @mirosantoss9 ай бұрын

  👍

• 
  @theamazingjoshchannel4420 Жыл бұрын

  How long did it take you...i have a horrible snoking issue shop said it was bad pcv

• 
  @Tmoneygarage Жыл бұрын

  Not that long. Maybe 20 minutes and a lot of that time was spent gluing the broken piece. If you get lucky and catch it first try then it’ll be quick

• 
  @troyslifker8023 Жыл бұрын

  How long did the glue hold? I had similar problem

• 
  @Tmoneygarage Жыл бұрын

  It never broke! I sold the car the end of last year so a little over a year and some change. I checked on it quite often and it held just fine.

• 
  @schoolinstrat1566 Жыл бұрын

  Unfortunately, not all Madzda 3 are the same. If you have 2.3 with plastic intake,you will have to take it and several components out first.

• 
  @Bibby723 Жыл бұрын

  The cooler stand is 🔥

• 
  @Tmoneygarage Жыл бұрын

  I’m glad SOMEBODY appreciates it haha

• 
  @jmontoya16772 жыл бұрын

  Fixing to crawl under my sons Tj thanks for the video. Now I know what I’m up against.

• 
  @Tmoneygarage2 жыл бұрын

  Of course!! I’m glad it’s helpful!

• 
  @shadiali44522 жыл бұрын

  Hey where did you get your vented oil cap?

• 
  @Tmoneygarage2 жыл бұрын

  I think I got it from ebay

• 
  @AlanBarratt802Vt2 жыл бұрын

  Works gd just hooked it up in my ms3 using the remote wire from the wire harness no cutting or splicing behind the factory head unit

• 
  @beaty90985 ай бұрын

  you have bose system?

• 
  @AlanBarratt802Vt5 ай бұрын

  @@beaty9098 yea

• 
  @beaty90985 ай бұрын

  What did u wire the remote wire to

• 
  @AlanBarratt802Vt5 ай бұрын

  @@beaty9098 didn't bought a adapter that had RCA and remote that clipped in-between head unit and wire harness but only said it work for Mazda 3 but there a yt vid of hooking up a speed3 on eBay or Amazon

• 
  @AlanBarratt802Vt5 ай бұрын

  @@beaty9098 PAC AOEM-MAZ2 Interface That Allows Replacement or Addition of an Amplifier in Select Mazda Vehicles Without a Factory Bose Sound System

• 
  @ivanspringsr91202 жыл бұрын

  Do you have to take the Manifold off

• 
  @Tmoneygarage2 жыл бұрын

  No I did not

• 
  @ItsHonoredMvr2 жыл бұрын

  Super helpful man I could not find where to come into the engine bay you a real one🙏

• 
  @Tmoneygarage2 жыл бұрын

  Awesome! I’m glad that’s helpful! Hit me with sub if you wanna lol it would be clutch

• 
  @alexandermartin64042 жыл бұрын

  don't ground your amp to the screws that hold your tail lights on... bad ground

• 
  @Tmoneygarage2 жыл бұрын

  It’s been good for me for almost two years now. Good advice though.

• 
  @jacobrin98752 жыл бұрын

  So how you know you pcv was bad?

• 
  @Tmoneygarage2 жыл бұрын

  I didn’t.. I’m losing oil and one of the things I read about was that a bad pcv could be the culprit. Turns out my valve was fine.

• 
  @camelfetus18122 жыл бұрын

  Usually if your pcv is bad, oil will come out of your intake

• 
  @kaevinr65412 жыл бұрын

  So what caused it to lose oil?

• 
  @camelfetus18122 жыл бұрын

  @@kaevinr6541 The pcv releases crank pressure, so when it’s closed for too long, the pressure rises which can push oil through the gaskets in the engine

• 
  @jacksonb46243 жыл бұрын

  do u know if its possible to install some sort of bass knob to control the 2nd amp independently?

• 
  @Tmoneygarage2 жыл бұрын

  Mine came with a bass knob and it works fine with this setup

• 
  @XanniBar3 жыл бұрын

  wish you filmed all your mods big or small!

• 
  @Tmoneygarage2 жыл бұрын

  I'll work on it! Thank you for the input

• 
  @toddfagan77033 жыл бұрын

  My bolt stripped too i used a grinder took chain guard off

• 
  @ingcavazos3 жыл бұрын

  My mechanic recommend me to use the mopar sensor because this is the only one that works for long time. This is true? I will go for IAC too, because have 2 check engine codes related to this.

• 
  @Tmoneygarage3 жыл бұрын

  I'm not sure. I sold the jeep while back. I never had an issue with the one I put on.

• 
  @corie_10323 жыл бұрын

  Good video friend! Any tips when getting the stock downpipe out? I'm doing mine this weekend.

• 
  @Tmoneygarage3 жыл бұрын

  Thank you for your support! I need to put out an update video. It won't be too bad. It's just a lot of wiggling. It'll catch near where it opens up to the exhaust manny.

• 
  @aidanms31543 жыл бұрын

  Also did you have to get new fuel pump internals before you installed the down pipe

• 
  @Tmoneygarage3 жыл бұрын

  It's a must

• 
  @aidanms31543 жыл бұрын

  @@Tmoneygarage thanks man

• 
  @aidanms31543 жыл бұрын

  Hey I was wanting to get a down pipe too it’s just there is a lot to choose from on eBay do you have any recommendations?

• 
  @Tmoneygarage3 жыл бұрын

  Theyre all the same. Just piping. As long as it's made for the car

• 
  @Tmoneygarage3 жыл бұрын

  It's a must

• 
  @aidanms31543 жыл бұрын

  @@Tmoneygarage thanks for the reply man I can’t wait to make my car faster and make it sound less like a vacuum😂

• 
  @bsckleen3 жыл бұрын

  Very helpful I just bought a 2003 TJ and have the same sensor that has gone bad. you made that look very easy.

• 
  @Tmoneygarage3 жыл бұрын

  Thank you! Im glad you find it useful. I got lucky with it. Enjoy your jeep. I sold mine a couple years ago and miss it everyday

• 
  @bigbank73503 жыл бұрын

  No fuse?

• 
  @Tmoneygarage3 жыл бұрын

  There's a fuse from amp to battery

• 
  @matthewmoore99013 жыл бұрын

  So that blue wire goes to the amp?

• 
  @Tmoneygarage3 жыл бұрын

  Sorry for the late response. The signal wire goes to the amp.

• 
  @jaspartap123g3 жыл бұрын

  Thankyou so much man👍

• 
  @Tmoneygarage3 жыл бұрын

  No problem! Im glad this was helpful!

• 
  @tyronenur23734 жыл бұрын

  Bro you forgot the heat shield on the first outlet pipe 😂

• 
  @Tmoneygarage4 жыл бұрын

  I didnt forget about it

• 
  @inee1074 жыл бұрын

  is the power constantly on on the amp? does it drain the battery?

• 
  @Tmoneygarage4 жыл бұрын

  No that's what your signal wire is for. You tap that into something that would only turn on when the car is on

• 
  @inee1074 жыл бұрын

  @@Tmoneygarage i see, so in your case where did you tap the signal wire into?

• 
  @Tmoneygarage4 жыл бұрын

  I honestly done remember.. i think I used the antenna wire

• 
  @FirstGenSpeed34 жыл бұрын

  Link?

• 
  @Tmoneygarage4 жыл бұрын

  I dont remember which one i got. They will all work as long as theyre made for speed 3s.

• 
  @adrianhernandezgarcia8494 жыл бұрын

  DUDE YOU HAVE THE STEREO CONNECTOR DIAGRAM TROSE CABLES AND I NEED TO CONNECT IT AGAIN, THANKS.

• 
  @Tmoneygarage4 жыл бұрын

  What do you need?

• 
  @cruxinterfaces4 жыл бұрын

  I've seen your other videos as well as this one, you should try using our products on your vehicle please subscribe to us.

• 
  @Phormula4 жыл бұрын

  Where did you say you ran the blue and white signal wire from the adapter? it wasn’t attached to anything in the video so i wasnt quite sure. I was also curious as to what those T-splice clamp on the gray wire were for

• 
  @Tmoneygarage4 жыл бұрын

  Hey, it's been awhile so my memory is kind of hazy but I believe that white and blue wire is a signal wire. That goes to your amp to turn it on. I think i spliced my amp to another wire that would turn on with the car for some reason. Let me know if you need more help.

• 
  @arnoldnxtlvlupsablan94053 жыл бұрын

  Where is the bue wire loacated at is it the big treminal at the back or the second small terminal? And what is the pin hole nuber?? Pls thanks

• 
  @herimartinez53084 жыл бұрын

  Great video man I finally was able to add the subwoofer. The product works great.

• 
  @Tmoneygarage4 жыл бұрын

  Awesome man! Thank you. Sorry I couldn't get to reply in time. Glad it's working

• 
  @GottiFishes4 жыл бұрын

  Totally unrelated but what radio head unit are you running

• 
  @Tmoneygarage4 жыл бұрын

  Seicane the newest version for gen 2

• 
  @oliviergamache42204 жыл бұрын

  Do you still use the oem amp or the one that come with your sub

• 
  @Tmoneygarage4 жыл бұрын

  I still have the old amp in and working. However I'm using the second amp just for the sub

• 
  @erron24 жыл бұрын

  Do u know where the factory amplifier is located? I bought a subwoofer with built in amplifier and it keeps chipping in and out. I got signal directly from subwoofer at back

• 
  @Tmoneygarage4 жыл бұрын

  It should be under the passenger seat iirc

• 
  @tjrysanek90194 жыл бұрын

  How come you took out the factory sub, is that necessary? Or could u just run two

• 
  @Tmoneygarage4 жыл бұрын

  I didnt take out the factory sub.

• 
  @tjrysanek90194 жыл бұрын

  @@Tmoneygarage oops my bad i must be dumb

• 
  @Tmoneygarage4 жыл бұрын

  Lol no worries

• 
  @XxSmilexX5024 жыл бұрын

  Do you have any problems with o2 sensor bank 1 sensor 2?

• 
  @Tmoneygarage4 жыл бұрын

  I actually did. I did a little research and found out gen 2s don't like the extended o2 bung. I got a short bung welded on and the codes never came back.

• 
  @XxSmilexX5024 жыл бұрын

  @@Tmoneygarage whare do you weld it bro like on the first or sec o2sensor? Sorry bro i buy one and i dont know what to do .

• 
  @Tmoneygarage4 жыл бұрын

  Which ever one is too long. If it looks extended then get a stubby one.

• 
  @XxSmilexX5024 жыл бұрын

  @@Tmoneygarage thank you bro

• 
  @gdg13914 жыл бұрын

  What tire sizes you have on, and did you use stock size inner tube size?

• 
  @deecam66514 жыл бұрын

  Thanks for the video took me almost two hours trying to figure out hot to get the connector off, thanks for showing that

• 
  @Tmoneygarage4 жыл бұрын

  I'm glad this video is still helping lol!

• 
  @ksmith7524 жыл бұрын

  thanks. I swapped my engine and all the other O2 sensor connectors are up around the intake manifold and I couldn't find this one. I had to watch a few before I both found one that was the right sensor and who showed where the connector was. Saved again by the good people who post vids. Thank you.

• 
  @Tmoneygarage4 жыл бұрын

  Glad to hear this was helpful! Thanks for watching my video lol

• 
  @EpicVidStudio4 жыл бұрын

  Do you keep the wheel controls and led display doing this? I have a loc right now, but with that one i lost wheel controls and info display

• 
  @Tmoneygarage4 жыл бұрын

  I didnt lose any functionality with the one I installed

• 
  @EpicVidStudio4 жыл бұрын

  @@Tmoneygarage okay, maybe i should give this one a try. Thanks

• 
  @Tmoneygarage4 жыл бұрын

  @@EpicVidStudio let me know how it goes for you!

• 
  @sendsenpai64714 жыл бұрын

  How is your wire holding up behind the heat shield? Any discoloration or melting? Saw another vid explaining that their power wire was shorting because it had melted behind the firewall.

• 
  @Tmoneygarage4 жыл бұрын

  Mine has been fine ever since the install. I check it often havent noticed any change

• 
  @venom105504 жыл бұрын

  so i tried this and im not getting any sound through my speakers at all idk whats going on with it and check everything but i did it right

• 
  @Tmoneygarage4 жыл бұрын

  Where did you out the ground?

• 
  @venom105504 жыл бұрын

  @@Tmoneygarage same spot on the video but i did try different areas to make sure the amp was turning on and getting a signal

• 
  @Tmoneygarage4 жыл бұрын

  @@venom10550 I had something similar when installing mine. I had power going to the amp but no audio. I just tightened my ground even more and the audio came right on.

• 
  @WhiteGravey5 жыл бұрын

  i dont want to sound like a know-it-all since i am trying to learn how to tension the chain on my drz400sm but the manual says. your chain might be a tad but tight if its only 1 inch of slack. Inspect the drive chain slack before each use of the motorcycle. The drive chain should be {adjusted for 40 - 50 mm (1.6-2.0 in) of slack, as shown.

• 
  @Tmoneygarage5 жыл бұрын

  Huh interesting! Thanks for the info. It's my roommates bike so I'll let him know

• 
  @meeks7265 жыл бұрын

  Um so my sub is getting power but no output? There's no bass coming from my sub at all. There's more bass coming from my door speakers than my actually sub

• 
  @Tmoneygarage5 жыл бұрын

  Make sure you rca cables are right and matching. Like swap one end from right to left

• 
  @meeks7265 жыл бұрын

  @@Tmoneygarage i did. They use to work but now idk what happens. When I play music, my car's normal speakers sounds like they're bass boosted but no bass coming from actual sub

• 
  @meeks7265 жыл бұрын

  @@Tmoneygarage I have a 10" kicker all in one sub. The one with built in amp

• 
  @jacobaggson36895 жыл бұрын

  Make sure you're ground didn't come loose

• 
  @kristiangirotto91255 жыл бұрын

  have you had any luck with the sound? I have a 2013 GS 6 M/T and got the exact same kit with you, and was worried since there isn't a dedicated sub-output wether this would affect sound or not

• 
  @Tmoneygarage5 жыл бұрын

  Everything is working fine for me

• 
  @kristiangirotto91255 жыл бұрын

  Did u have any issues with the blue remote line coming from the LOC?? I followed you exactly and have tried 2 different LOC (exact same as yours) and neither of them are receiving power to the remote line

• 
  @Tmoneygarage5 жыл бұрын

  What did you splice the signal wire to?

• 
  @meeks7265 жыл бұрын

  @@kristiangirotto9125 try splicing it to the cigarette lighter

• 
  @kristiangirotto91255 жыл бұрын

  Do you guys know which wires are what? Or know where I can find access to a blueprint of the colors for a 2013 3 hatchback GS non-bose? I haven't been able to splice it since I'm not sure which wire actually is what. I read on some forums that it would be smart to splice it to the ACC wire which might be red?

• 
  @skiriders.5 жыл бұрын

  HI Tien Tran.

• 
  @skiriders.5 жыл бұрын

  Can you speak vietnamese

• 
  @Tmoneygarage5 жыл бұрын

  @@skiriders. I do what's up?

• 
  @skiriders.5 жыл бұрын

  Can you help me fix the chain?

• 
  @Tmoneygarage5 жыл бұрын

  What's up with it?

• 
  @terremoto..68095 жыл бұрын

  I love my 2016 hawk! Fix that rattle cause on these bikes any rattle might lead to something 👎

• 
  @Tmoneygarage5 жыл бұрын

  The rattling is from my front plastic. I'm probably just going to remove it

• 
  @kevinfarrell31215 жыл бұрын

  Would it not be better to connect the screw end before plugging in the electrical side?

• 
  @Tmoneygarage5 жыл бұрын

  It's all preference. Probably is easier