**** To be fair, please note that I have never used a laser engraver/cutter but am in the research phase of getting one...maybe.*** What I don't want to do is to get a "starter" machine, only to realize that I need something more. What's holding me back right now are the price tags. Also, I emailed xTool customer support asking if they will be selling the Ultras on Amazon. They responded with a "no plans to list it on the Amazon platform now". I don't know if that's a "never", or just a "for right now". I have a decent gift card balance with Amazon which would help offset the purchase price. With that said, all of the video reviews I see here on KZread are very well done, including this one. No offense, but the problem I have is that the reviewers have either received a "free" Ultra, or they get a kickback of some sort. Since the live reveal of the Ultra, I have searched far and wide for a 100% unbiased review. So far, I haven't found any. The only negative comment "in print" that I have read said that LightBurn can be used, but is not fully functional on the Ultra. LightBurn appears to be the preferred industry standard.
@SoaringRedEagle10 сағат бұрын
whats with that massive mask...😅😂🤣 I never wear anything (eye).. never had any issues.(No safety)
@cykovisuals11 сағат бұрын
Great for an EDC valet on the nightstand or dresser.
@TheReformationWoodshop59 минут бұрын
For sure 👍🏻
@conniq158522 сағат бұрын
The IR laser will also work on the S1 correct? If im not mistaken, i believe that head will allow you to engrave most metals?
@TheReformationWoodshop59 минут бұрын
XTool sells an IR module that works specifically with each machine and aren’t compatible across the two lasers.
@anthonywalters8809Күн бұрын
Hey, I’ve seen some people stain before and some after hanging the beam. Any reason you chose before? Asking because you have to fasten the beam, then fill and putty the hole. Does the stain hold after that?
@TheReformationWoodshopКүн бұрын
Staining after would be best to conceal fasteners and putty for sure, often times folks just trim it in a way that hides the screws. So that’s always an option 👊🏻
@MRrwmacКүн бұрын
Handy items for our woodworking. Especially like the inspector peeping around the corner so she can report to the boss what Daddy’s doing.
@TheReformationWoodshopКүн бұрын
🤣🤣 always!
@mariobear4698Күн бұрын
Thank you
@TheReformationWoodshopКүн бұрын
No problem!
@ProChaos514Күн бұрын
If you don't care about looks, this stuff is awesome, if you want a clean look, buy the sticks of aluminum. I'm yet to see a system that looks good with this stuff. -Sincerely a dude that sells pneumatics for a living.
@TheReformationWoodshopКүн бұрын
You’re right, it could be prettier. I’ll check out the aluminum option. 👊🏻
@monkeysbud3612Күн бұрын
4500 dollars 💲💲 😱
@TheReformationWoodshopКүн бұрын
Definitely a hefty price tag
@digitaldoom35932 күн бұрын
Bought mine the Night they live streamed it just waiting for my shipping email.... the wait is brutal
@TheReformationWoodshopКүн бұрын
Good luck when it arrives!
@gtasandman2 күн бұрын
lol ive noticed facebook market with them flooded at 50-60 dollars but its been sitting at lowes for 20 dollars for a month now.
@TheReformationWoodshopКүн бұрын
You gotta love it!
@magnoliaoakswoodshop2 күн бұрын
Hi Markis, great video! I love the xTool lasers and look forward to learning more about the F1 Ultra. Already have the P2, D1, S1, and F1 so PROBABLY need to go ahead and complete the set...
@TheReformationWoodshop2 күн бұрын
That’s crazy that you’re working with all of them! Every-time I wanted a new one I got rid of the old one 🤣
@ShyneflowLC2 күн бұрын
To complete the set you'll also need the M1 as well... can buy mine 😜
@Lauren-ez2gd2 күн бұрын
How tall did you make this?
@henryskinner10924 күн бұрын
I need to weld something and I am not going to pay $150.00 for someone else to weld. I am gonna get me one. Thank you, Stay Safe, and God Bless. BTW I have never welded anything and I am 75 years young.
@TheReformationWoodshop4 күн бұрын
Good luck!
@lalathebenificent13354 күн бұрын
Can you add wheels to the bottom?
@TheReformationWoodshop4 күн бұрын
Absolutely! There are a ton of wheel options that can mount under the wall or to the face to make it mobile.
@2bshared5405 күн бұрын
Hi, love your video. How do you cut the different shapes around the images? Thanks
@Pasakoye6 күн бұрын
I'm gonna try doing something like this with a coping saw and files.
@TheReformationWoodshop6 күн бұрын
That’s definitely doable! Good luck.
@KittyNinjas8 күн бұрын
The man has talent indeed!
@TheReformationWoodshop4 күн бұрын
Greatly appreciated! 👊🏻
@alshaw94208 күн бұрын
gng
@michaelhall34858 күн бұрын
We have a new PAPR design coming on the market soon. Would love for you to try it out when we get through certification. MicroClimate Air3.
@marilynfranzua48528 күн бұрын
Hi, which one would you say is best for jewelry engraving?
@TheReformationWoodshop4 күн бұрын
I would say the F1… but if you really want a good Jewelry option XTool just launched the F1 Ultra and it does really deep obvious engravings on all materials including metal.
@mariahrt11179 күн бұрын
We are getting ready to do some faux beams. Thanks for the simple video with your personal tips!
@TheReformationWoodshop4 күн бұрын
Glad it was helpful! Good luck!
@adamkreuz90689 күн бұрын
I was wondering how accurate this was or if it was a gimmick. Seems pretty darn useful! I am so bad with numbers
@TheReformationWoodshop4 күн бұрын
It really has been great!
@Bobapuppy90810 күн бұрын
Great video! I have hollow boxes in our front porch that is not touching the slab. I caulked around it. Now im not sure if i did the right thing. Would that trap moisture and lead to mold growth?
@jaredmcdermott81168 күн бұрын
I would think so. Many people use a nickel.
@mckaymnm10 күн бұрын
i just pulled mine out after sitting on it for 6or whatever months its been. i'm guessing the laser is how you turn it off. looking at the side i'm not positive i turned it off though. help?
@TheReformationWoodshop10 күн бұрын
Yes, the laser button does turn it off all the way, but your measurements remain on the OLED display. Even after your battery is fully dead, they’ll still remain on the display. That science is above my pay grade lol.
@LorenaOlvera1110 күн бұрын
For jewelry which one is the best?
@TheReformationWoodshop4 күн бұрын
I would say the F1… but if you really want a good Jewelry option XTool just launched the F1 Ultra and it does really deep obvious engravings on all materials including metal.
@MrDavidisdaboss11 күн бұрын
Do I get one of his shit filled diapers in the box ,too?😂
@4huntinfun11 күн бұрын
Unsubscribed.
@jack611611 күн бұрын
Shut up
@rudyrafferty590512 күн бұрын
I love it nice job and for the couple of negative comments go look in the mirror and try and convince yourself your better off with Biden then when Trump was president. I’ll wait lol
@ScottS-gc3wk10 күн бұрын
Plenty you name 1 thing trump gave you and don’t say tax breaks there was none only for the rich and inflation is his and also gas prices nope president has no saying on what gas prices are going to be so there is your 3 points you would give stop believing the lies you are told
@ScottS-gc3wk10 күн бұрын
Funny how you people worship someone who has never done anything for you shows how pathetic this generation is you are either real old at a 30 something trying to be relevant grow up buddy an realize no president or politician will ever do anything for you or the middle class working people anything you say is a false
@PierogiInspired12 күн бұрын
Nice dart board/cutting board
@Gladly12411 күн бұрын
Another example if the tolerant left
@Schwab.travis12 күн бұрын
Disgusting
@Speed-ku6jx12 күн бұрын
Trump 2024 baby!
@Willtrax10 күн бұрын
For sure 2024 Trump will be back in office!!
@MrSirlulzalot12 күн бұрын
Very cool.
@bradtimms20512 күн бұрын
I just ordered this sprayer to stain a really big privacy fence. Thanks for the video.
@TheReformationWoodshop12 күн бұрын
Good luck!
@michellemaynard204712 күн бұрын
Thank you. Great video. Do sell plans for those of us not so inclined to figure all of that out.
@TheReformationWoodshop12 күн бұрын
I don’t have plans for this one unfortunately. Sorry!
@joesa699813 күн бұрын
Can I use it with primer ?
@TheReformationWoodshop12 күн бұрын
Yes!
@maryelizabethbush2113 күн бұрын
Found a scroll saw at a thrift store. I didn't know what it was or what one does with it. But now I'm glad I have it. This is going to be fun!
@TheReformationWoodshop13 күн бұрын
Very cool! Good luck!
@dylandepuy371513 күн бұрын
No handle
@TheReformationWoodshop4 күн бұрын
Add one!
@Zamboni-080514 күн бұрын
You must have never used a good quality countersink such as the Amana Tool 55227 Carbide Tipped 82 Degree Countersink Set. Those HF will not even come close to thw quality and sharpness of the Amana
@BenYarcho-dd3vv14 күн бұрын
Anyway to get a material list for this? The plans on kreg just say (1 plywood) or (1 maple board 1x4) but the cut list suggets itll be more than that
@user-cd9js9eu7m14 күн бұрын
I use them to store my singer sewing stuff in I put little feet on them also use them to store my silhouette cutting stuff in I spray paint them to match my room and put decals on the it won’t let me leave a picture are I would show you I also bead flowers I use one for them I have four right now
@HazeDragonXx14 күн бұрын
I’m 30 been working with wood for about 10 years
@mslateshashaw15 күн бұрын
This is not easy because the average person does not even own these sorts of tools❤
@scottutube116 күн бұрын
Good stuff. I would: Use a select/premium grade of pine. Use a sanding sealer before stain. Glossy? That's not natural for a wood beam. I'd go with flat, satin at the very most.
@alexpalette16 күн бұрын
My favorite of the woodworking tools was the ratchet set.
@spinxt16 күн бұрын
When you measured the thickness of the butcher block, it read 1-7/16. I'm not aware of a butcher block manufactured in that thickness. I question this device's accuracy.
@jerryw522516 күн бұрын
My favorite is the one you didn't talk about. It's the glue cap/stand for the work bench. Thanks.
@jerryw522516 күн бұрын
I have found this to be so true. Making jigs that match vacuum connectors for those projects down the line that require a hose fitting. Just label said fitting with its size. Thanks
Пікірлер
**** To be fair, please note that I have never used a laser engraver/cutter but am in the research phase of getting one...maybe.*** What I don't want to do is to get a "starter" machine, only to realize that I need something more. What's holding me back right now are the price tags. Also, I emailed xTool customer support asking if they will be selling the Ultras on Amazon. They responded with a "no plans to list it on the Amazon platform now". I don't know if that's a "never", or just a "for right now". I have a decent gift card balance with Amazon which would help offset the purchase price. With that said, all of the video reviews I see here on KZread are very well done, including this one. No offense, but the problem I have is that the reviewers have either received a "free" Ultra, or they get a kickback of some sort. Since the live reveal of the Ultra, I have searched far and wide for a 100% unbiased review. So far, I haven't found any. The only negative comment "in print" that I have read said that LightBurn can be used, but is not fully functional on the Ultra. LightBurn appears to be the preferred industry standard.
whats with that massive mask...😅😂🤣 I never wear anything (eye).. never had any issues.(No safety)
Great for an EDC valet on the nightstand or dresser.
For sure 👍🏻
The IR laser will also work on the S1 correct? If im not mistaken, i believe that head will allow you to engrave most metals?
XTool sells an IR module that works specifically with each machine and aren’t compatible across the two lasers.
Hey, I’ve seen some people stain before and some after hanging the beam. Any reason you chose before? Asking because you have to fasten the beam, then fill and putty the hole. Does the stain hold after that?
Staining after would be best to conceal fasteners and putty for sure, often times folks just trim it in a way that hides the screws. So that’s always an option 👊🏻
Handy items for our woodworking. Especially like the inspector peeping around the corner so she can report to the boss what Daddy’s doing.
🤣🤣 always!
Thank you
No problem!
If you don't care about looks, this stuff is awesome, if you want a clean look, buy the sticks of aluminum. I'm yet to see a system that looks good with this stuff. -Sincerely a dude that sells pneumatics for a living.
You’re right, it could be prettier. I’ll check out the aluminum option. 👊🏻
4500 dollars 💲💲 😱
Definitely a hefty price tag
Bought mine the Night they live streamed it just waiting for my shipping email.... the wait is brutal
Good luck when it arrives!
lol ive noticed facebook market with them flooded at 50-60 dollars but its been sitting at lowes for 20 dollars for a month now.
You gotta love it!
Hi Markis, great video! I love the xTool lasers and look forward to learning more about the F1 Ultra. Already have the P2, D1, S1, and F1 so PROBABLY need to go ahead and complete the set...
That’s crazy that you’re working with all of them! Every-time I wanted a new one I got rid of the old one 🤣
To complete the set you'll also need the M1 as well... can buy mine 😜
How tall did you make this?
I need to weld something and I am not going to pay $150.00 for someone else to weld. I am gonna get me one. Thank you, Stay Safe, and God Bless. BTW I have never welded anything and I am 75 years young.
Good luck!
Can you add wheels to the bottom?
Absolutely! There are a ton of wheel options that can mount under the wall or to the face to make it mobile.
Hi, love your video. How do you cut the different shapes around the images? Thanks
I'm gonna try doing something like this with a coping saw and files.
That’s definitely doable! Good luck.
The man has talent indeed!
Greatly appreciated! 👊🏻
gng
We have a new PAPR design coming on the market soon. Would love for you to try it out when we get through certification. MicroClimate Air3.
Hi, which one would you say is best for jewelry engraving?
I would say the F1… but if you really want a good Jewelry option XTool just launched the F1 Ultra and it does really deep obvious engravings on all materials including metal.
We are getting ready to do some faux beams. Thanks for the simple video with your personal tips!
Glad it was helpful! Good luck!
I was wondering how accurate this was or if it was a gimmick. Seems pretty darn useful! I am so bad with numbers
It really has been great!
Great video! I have hollow boxes in our front porch that is not touching the slab. I caulked around it. Now im not sure if i did the right thing. Would that trap moisture and lead to mold growth?
I would think so. Many people use a nickel.
i just pulled mine out after sitting on it for 6or whatever months its been. i'm guessing the laser is how you turn it off. looking at the side i'm not positive i turned it off though. help?
Yes, the laser button does turn it off all the way, but your measurements remain on the OLED display. Even after your battery is fully dead, they’ll still remain on the display. That science is above my pay grade lol.
For jewelry which one is the best?
I would say the F1… but if you really want a good Jewelry option XTool just launched the F1 Ultra and it does really deep obvious engravings on all materials including metal.
Do I get one of his shit filled diapers in the box ,too?😂
Unsubscribed.
Shut up
I love it nice job and for the couple of negative comments go look in the mirror and try and convince yourself your better off with Biden then when Trump was president. I’ll wait lol
Plenty you name 1 thing trump gave you and don’t say tax breaks there was none only for the rich and inflation is his and also gas prices nope president has no saying on what gas prices are going to be so there is your 3 points you would give stop believing the lies you are told
Funny how you people worship someone who has never done anything for you shows how pathetic this generation is you are either real old at a 30 something trying to be relevant grow up buddy an realize no president or politician will ever do anything for you or the middle class working people anything you say is a false
Nice dart board/cutting board
Another example if the tolerant left
Disgusting
Trump 2024 baby!
For sure 2024 Trump will be back in office!!
Very cool.
I just ordered this sprayer to stain a really big privacy fence. Thanks for the video.
Good luck!
Thank you. Great video. Do sell plans for those of us not so inclined to figure all of that out.
I don’t have plans for this one unfortunately. Sorry!
Can I use it with primer ?
Yes!
Found a scroll saw at a thrift store. I didn't know what it was or what one does with it. But now I'm glad I have it. This is going to be fun!
Very cool! Good luck!
No handle
Add one!
You must have never used a good quality countersink such as the Amana Tool 55227 Carbide Tipped 82 Degree Countersink Set. Those HF will not even come close to thw quality and sharpness of the Amana
Anyway to get a material list for this? The plans on kreg just say (1 plywood) or (1 maple board 1x4) but the cut list suggets itll be more than that
I use them to store my singer sewing stuff in I put little feet on them also use them to store my silhouette cutting stuff in I spray paint them to match my room and put decals on the it won’t let me leave a picture are I would show you I also bead flowers I use one for them I have four right now
I’m 30 been working with wood for about 10 years
This is not easy because the average person does not even own these sorts of tools❤
Good stuff. I would: Use a select/premium grade of pine. Use a sanding sealer before stain. Glossy? That's not natural for a wood beam. I'd go with flat, satin at the very most.
My favorite of the woodworking tools was the ratchet set.
When you measured the thickness of the butcher block, it read 1-7/16. I'm not aware of a butcher block manufactured in that thickness. I question this device's accuracy.
My favorite is the one you didn't talk about. It's the glue cap/stand for the work bench. Thanks.
I have found this to be so true. Making jigs that match vacuum connectors for those projects down the line that require a hose fitting. Just label said fitting with its size. Thanks
Love it! What’s the paint color ??
How do you get the cap designs